Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Note that this removes support for the untested FIEMAP_FLAG_XATTR.  It
could be added relatively easily with iomap ops for the attr fork, but
without test coverage I don't feel safe doing this.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Convert XFS to use the new iomap based multipage write path. This involves
implementing the ->iomap_begin and ->iomap_end methods, and switching the
buffered file write, page_mkwrite and xfs_iozero paths to the new iomap
helpers.

With this change __xfs_get_blocks will never be used for buffered writes,
and the code handling them can be removed.

Based on earlier code from Dave Chinner.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Currently zeroing out blocks and waiting for writeout is a bit of a mess in
truncate.  This patch gives it a clear order in preparation for the iomap
path:

 (1) we first wait for any direct I/O to complete to prevent any races
     for it
 (2) we then perform the actual zeroing, and only use the truncate_page
     helpers for truncating down.  The truncate up case already is
     handled by the separate call to xfs_zero_eof.
 (3) only then we write back dirty data, as zeroing block may cause
     dirty pages when using either xfs_zero_eof or the new iomap
     infrastructure.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

And ensure it works for RT subvolume files an set the block device,
both of which will be needed to be able to use the function in the
buffered write path.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Add a simple fiemap implementation based on iomap_ops, partially based
on a previous implementation from Bob Peterson <rpeterso@redhat.com>.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

This avoid needing a separate inefficient get_block based DAX zero_range
implementation in file systems.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Add infrastructure for multipage buffered writes.  This is implemented
using an main iterator that applies an actor function to a range that
can be written.

This infrastucture is used to implement a buffered write helper, one
to zero file ranges and one to implement the ->page_mkwrite VM
operations.  All of them borrow a fair amount of code from fs/buffers.
for now by using an internal version of __block_write_begin that
gets passed an iomap and builds the corresponding buffer head.

The file system is gets a set of paired ->iomap_begin and ->iomap_end
calls which allow it to map/reserve a range and get a notification
once the write code is finished with it.

Based on earlier code from Dave Chinner.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

The self-test was updated to cover zero-length strings; the function
needs to be updated, too.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function")
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The original name was simply hash_string(), but that conflicted with a
function with that name in drivers/base/power/trace.c, and I decided
that calling it "hashlen_" was better anyway.

But you have to do it in two places.

[ This caused build errors for architectures that don't define
  CONFIG_DCACHE_WORD_ACCESS   - Linus ]
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function")
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The HPFS filesystem used generic_show_options to produce string that is
displayed in /proc/mounts.  However, there is a problem that the options
may disappear after remount.  If we mount the filesystem with option1
and then remount it with option2, /proc/mounts should show both option1
and option2, however it only shows option2 because the whole option
string is replaced with replace_mount_options in hpfs_remount_fs.

To fix this bug, implement the hpfs_show_options function that prints
options that are currently selected.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit c8f33d0b ("affs: kstrdup() memory handling") checks if the
kstrdup function returns NULL due to out-of-memory condition.

However, if we are remounting a filesystem with no change to
filesystem-specific options, the parameter data is NULL.  In this case,
kstrdup returns NULL (because it was passed NULL parameter), although no
out of memory condition exists.  The mount syscall then fails with
ENOMEM.

This patch fixes the bug.  We fail with ENOMEM only if data is non-NULL.

The patch also changes the call to replace_mount_options - if we didn't
pass any filesystem-specific options, we don't call
replace_mount_options (thus we don't erase existing reported options).

Fixes: c8f33d0b ("affs: kstrdup() memory handling")
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org	# v4.1+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit ce657611 ("hpfs: kstrdup() out of memory handling") checks if
the kstrdup function returns NULL due to out-of-memory condition.

However, if we are remounting a filesystem with no change to
filesystem-specific options, the parameter data is NULL.  In this case,
kstrdup returns NULL (because it was passed NULL parameter), although no
out of memory condition exists.  The mount syscall then fails with
ENOMEM.

This patch fixes the bug.  We fail with ENOMEM only if data is non-NULL.

The patch also changes the call to replace_mount_options - if we didn't
pass any filesystem-specific options, we don't call
replace_mount_options (thus we don't erase existing reported options).

Fixes: ce657611 ("hpfs: kstrdup() out of memory handling")
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Various builds (such as i386:allmodconfig) fail with

  fs/binfmt_aout.c:133:2: error: expected identifier or '(' before 'return'
  fs/binfmt_aout.c:134:1: error: expected identifier or '(' before '}' token

[ Oops. My bad, I had stupidly thought that "allmodconfig" covered this
  on x86-64 too, but it obviously doesn't.  Egg on my face.  - Linus ]

Fixes: 5d22fc25 ("mm: remove more IS_ERR_VALUE abuses")
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is just the infrastructure; there are no users yet.

This is modelled on CONFIG_ARCH_RANDOM; a CONFIG_ symbol declares
the existence of <asm/hash.h>.

That file may define its own versions of various functions, and define
HAVE_* symbols (no CONFIG_ prefix!) to suppress the generic ones.

Included is a self-test (in lib/test_hash.c) that verifies the basics.
It is NOT in general required that the arch-specific functions compute
the same thing as the generic, but if a HAVE_* symbol is defined with
the value 1, then equality is tested.
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Philippe De Muyter <phdm@macq.eu>
Cc: linux-m68k@lists.linux-m68k.org
Cc: Alistair Francis <alistai@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-h8-devel@lists.sourceforge.jp

Patch 0fed3ac8 improved the hash mixing, but the function is slower
than necessary; there's a 7-instruction dependency chain (10 on x86)
each loop iteration.

Word-at-a-time access is a very tight loop (which is good, because
link_path_walk() is one of the hottest code paths in the entire kernel),
and the hash mixing function must not have a longer latency to avoid
slowing it down.

There do not appear to be any published fast hash functions that:
1) Operate on the input a word at a time, and
2) Don't need to know the length of the input beforehand, and
3) Have a single iterated mixing function, not needing conditional
   branches or unrolling to distinguish different loop iterations.

One of the algorithms which comes closest is Yann Collet's xxHash, but
that's two dependent multiplies per word, which is too much.

The key insights in this design are:

1) Barring expensive ops like multiplies, to diffuse one input bit
   across 64 bits of hash state takes at least log2(64) = 6 sequentially
   dependent instructions.  That is more cycles than we'd like.
2) An operation like "hash ^= hash << 13" requires a second temporary
   register anyway, and on a 2-operand machine like x86, it's three
   instructions.
3) A better use of a second register is to hold a two-word hash state.
   With careful design, no temporaries are needed at all, so it doesn't
   increase register pressure.  And this gets rid of register copying
   on 2-operand machines, so the code is smaller and faster.
4) Using two words of state weakens the requirement for one-round mixing;
   we now have two rounds of mixing before cancellation is possible.
5) A two-word hash state also allows operations on both halves to be
   done in parallel, so on a superscalar processor we get more mixing
   in fewer cycles.

I ended up using a mixing function inspired by the ChaCha and Speck
round functions.  It is 6 simple instructions and 3 cycles per iteration
(assuming multiply by 9 can be done by an "lea" instruction):

		x ^= *input++;
	y ^= x;	x = ROL(x, K1);
	x += y;	y = ROL(y, K2);
	y *= 9;

Not only is this reversible, two consecutive rounds are reversible:
if you are given the initial and final states, but not the intermediate
state, it is possible to compute both input words.  This means that at
least 3 words of input are required to create a collision.

(It also has the property, used by hash_name() to avoid a branch, that
it hashes all-zero to all-zero.)

The rotate constants K1 and K2 were found by experiment.  The search took
a sample of random initial states (I used 1023) and considered the effect
of flipping each of the 64 input bits on each of the 128 output bits two
rounds later.  Each of the 8192 pairs can be considered a biased coin, and
adding up the Shannon entropy of all of them produces a score.

The best-scoring shifts also did well in other tests (flipping bits in y,
trying 3 or 4 rounds of mixing, flipping all 64*63/2 pairs of input bits),
so the choice was made with the additional constraint that the sum of the
shifts is odd and not too close to the word size.

The final state is then folded into a 32-bit hash value by a less carefully
optimized multiply-based scheme.  This also has to be fast, as pathname
components tend to be short (the most common case is one iteration!), but
there's some room for latency, as there is a fair bit of intervening logic
before the hash value is used for anything.

(Performance verified with "bonnie++ -s 0 -n 1536:-2" on tmpfs.  I need
a better benchmark; the numbers seem to show a slight dip in performance
between 4.6.0 and this patch, but they're too noisy to quote.)

Special thanks to Bruce fields for diligent testing which uncovered a
nasty fencepost error in an earlier version of this patch.

[checkpatch.pl formatting complaints noted and respectfully disagreed with.]
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>

We'd like to make more use of the highly-optimized dcache hash functions
throughout the kernel, rather than have every subsystem create its own,
and a function that hashes basic null-terminated strings is required
for that.

(The name is to emphasize that it returns both hash and length.)

It's actually useful in the dcache itself, specifically d_alloc_name().
Other uses in the next patch.

full_name_hash() is also tweaked to make it more generally useful:
1) Take a "char *" rather than "unsigned char *" argument, to
   be consistent with hash_name().
2) Handle zero-length inputs.  If we want more callers, we don't want
   to make them worry about corner cases.
Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>

Older versions of gcc don't understand named initializers inside a
anonymous structure or union member.  It can be worked around by adding
the bracin gin the initializer for the anonymous member.

Without this, gcc 4.4.4 will fail the build with

    CC      fs/nfs/nfs4state.o
  fs/nfs/nfs4state.c:69: error: unknown field ‘data’ specified in initializer
  fs/nfs/nfs4state.c:69: warning: missing braces around initializer
  fs/nfs/nfs4state.c:69: warning: (near initialization for ‘zero_stateid.<anonymous>.data’)
  make[2]: *** [fs/nfs/nfs4state.o] Error 1

introduced in commit 93b717fd ("NFSv4: Label stateids with the type")
Reported-and-tested-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Anna Schumaker <Anna.Schumaker@netapp.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

smack ->d_instantiate() uses ->setxattr(), so to be able to call it before
we'd hashed the new dentry and attached it to inode, we need ->setxattr()
instances getting the inode as an explicit argument rather than obtaining
it from dentry.

Similar change for ->getxattr() had been done in commit ce23e640.  Unlike
->getxattr() (which is used by both selinux and smack instances of
->d_instantiate()) ->setxattr() is used only by smack one and unfortunately
it got missed back then.
Reported-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Tested-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The do_brk() and vm_brk() return value was "unsigned long" and returned
the starting address on success, and an error value on failure.  The
reasons are entirely historical, and go back to it basically behaving
like the mmap() interface does.

However, nobody actually wanted that interface, and it causes totally
pointless IS_ERR_VALUE() confusion.

What every single caller actually wants is just the simpler integer
return of zero for success and negative error number on failure.

So just convert to that much clearer and more common calling convention,
and get rid of all the IS_ERR_VALUE() uses wrt vm_brk().
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Most users of IS_ERR_VALUE() in the kernel are wrong, as they
pass an 'int' into a function that takes an 'unsigned long'
argument. This happens to work because the type is sign-extended
on 64-bit architectures before it gets converted into an
unsigned type.

However, anything that passes an 'unsigned short' or 'unsigned int'
argument into IS_ERR_VALUE() is guaranteed to be broken, as are
8-bit integers and types that are wider than 'unsigned long'.

Andrzej Hajda has already fixed a lot of the worst abusers that
were causing actual bugs, but it would be nice to prevent any
users that are not passing 'unsigned long' arguments.

This patch changes all users of IS_ERR_VALUE() that I could find
on 32-bit ARM randconfig builds and x86 allmodconfig. For the
moment, this doesn't change the definition of IS_ERR_VALUE()
because there are probably still architecture specific users
elsewhere.

Almost all the warnings I got are for files that are better off
using 'if (err)' or 'if (err < 0)'.
The only legitimate user I could find that we get a warning for
is the (32-bit only) freescale fman driver, so I did not remove
the IS_ERR_VALUE() there but changed the type to 'unsigned long'.
For 9pfs, I just worked around one user whose calling conventions
are so obscure that I did not dare change the behavior.

I was using this definition for testing:

 #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \
       unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO))

which ends up making all 16-bit or wider types work correctly with
the most plausible interpretation of what IS_ERR_VALUE() was supposed
to return according to its users, but also causes a compile-time
warning for any users that do not pass an 'unsigned long' argument.

I suggested this approach earlier this year, but back then we ended
up deciding to just fix the users that are obviously broken. After
the initial warning that caused me to get involved in the discussion
(fs/gfs2/dir.c) showed up again in the mainline kernel, Linus
asked me to send the whole thing again.

[ Updated the 9p parts as per Al Viro  - Linus ]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.org/lkml/2016/1/7/363
Link: https://lkml.org/lkml/2016/5/27/486
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently direct writes inside i_size on a DIO_SKIP_HOLES filesystem are
not allowed to allocate blocks(get_more_blocks() sets 'create' to 0
before calling get_block() callback), if it's a sparse file, direct
writes fall back to buffered writes to avoid stale data exposure from
concurrent buffered read.  But there're two cases that can result in
stale data exposure are not correctly detected.

1. The detection for "writing inside i_size" is not sufficient,
   writes can be treated as "extending writes" wrongly.  For example,
   direct write 1FSB (file system block) to a 1FSB sparse file on
   ext2/3/4, starting from offset 0, in this case it's writing inside
   i_size, but 'create' is non-zero, because 'block_in_file' and
   '(i_size_read(inode) >> blkbits' are both zero.

2. Direct writes starting from or beyong i_size (not inside i_size)
   also could trigger block allocation and expose stale data.  For
   example, consider a sparse file with i_size of 2k, and a write to
   offset 2k or 3k into the file, with a filesystem block size of 4k.
   (Thanks to Jeff Moyer for pointing this case out in his review.)

The first problem can be demostrated by running ltp-aiodio test ADSP045
many times.  When testing on extN filesystems, I see test failures
occasionally, buffered read could read non-zero (stale) data.

ADSP045: dio_sparse -a 4k -w 4k -s 2k -n 1

dio_sparse    0  TINFO  :  Dirtying free blocks
dio_sparse    0  TINFO  :  Starting I/O tests
non zero buffer at buf[0] => 0xffffffaa,ffffffaa,ffffffaa,ffffffaa
non-zero read at offset 0
dio_sparse    0  TINFO  :  Killing childrens(s)
dio_sparse    1  TFAIL  :  dio_sparse.c:191: 1 children(s) exited abnormally

The second problem can also be reproduced easily by a hacked dio_sparse
program, which accepts an option to specify the write offset.

What we should really do is to disable block allocation for writes that
could result in filling holes inside i_size.

Link: http://lkml.kernel.org/r/1463156728-13357-1-git-send-email-guaneryu@gmail.comReviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NEryu Guan <guaneryu@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Two new messages are added to support negotiating hb timeout.  Stop
nodes frmo talking an old version to mount as they will cause the
negotiation to fail.

Link: http://lkml.kernel.org/r/1464231615-27939-1-git-send-email-junxiao.bi@oracle.comSigned-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

hr_last_timeout_start should be set as the last time where hb is
still OK.  When hb write timeout, hung time will be (jiffies -
hr_last_timeout_start).
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Gang He <ghe@suse.com>
Cc: rwxybh <rwxybh@126.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sometimes io error is returned when storage is down for a while.  Like
for iscsi device, stroage is made offline when session timeout, and this
will make all io return -EIO.  For this case, nodes shouldn't do
negotiate timeout but should fence self.  So let nodes fence self when
o2hb_do_disk_heartbeat return an error, this is the same behavior with
o2hb without negotiate timer.
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Gang He <ghe@suse.com>
Cc: rwxybh <rwxybh@126.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Gang He <ghe@suse.com>
Cc: rwxybh <rwxybh@126.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This message is used to re-queue write timeout timer and negotiate timer
when all nodes suffer a write hung to storage, this makes node not fence
self if storage down.
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Gang He <ghe@suse.com>
Cc: rwxybh <rwxybh@126.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This message is sent to master node when non-master nodes's negotiate
timer expired.  Master node records these nodes in a bitmap which is
used to do write timeout timer re-queue decision.
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Gang He <ghe@suse.com>
Cc: rwxybh <rwxybh@126.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This series of patches is to fix the issue that when storage down, all
nodes will fence self due to write timeout.

With this patch set, all nodes will keep going until storage back
online, except if the following issue happens, then all nodes will do as
before to fence self.

1. io error got
2. network between nodes down
3. nodes panic

This patch (of 6):

When storage down, all nodes will fence self due to write timeout.  The
negotiate timer is designed to avoid this, with it node will wait until
storage up again.

Negotiate timer working in the following way:

1. The timer expires before write timeout timer, its timeout is half
   of write timeout now.  It is re-queued along with write timeout timer.
   If expires, it will send NEGO_TIMEOUT message to master node(node with
   lowest node number).  This message does nothing but marks a bit in a
   bitmap recording which nodes are negotiating timeout on master node.

2. If storage down, nodes will send this message to master node, then
   when master node finds its bitmap including all online nodes, it sends
   NEGO_APPROVL message to all nodes one by one, this message will
   re-queue write timeout timer and negotiate timer.  For any node doesn't
   receive this message or meets some issue when handling this message, it
   will be fenced.  If storage up at any time, o2hb_thread will run and
   re-queue all the timer, nothing will be affected by these two steps.
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Gang He <ghe@suse.com>
Cc: rwxybh <rwxybh@126.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

preparation for similar switch in ->setxattr() (see the next commit for
rationale).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

d_type check requires successful creation of workdir as iterates
through work dir and expects work dir to be present in it. If that's
not the case, this check will always return d_type not supported even
if underlying filesystem might be supporting it.

So don't do this check if work dir creation failed in previous step.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

In user namespace the whiteout creation fails with -EPERM because the
current process isn't capable(CAP_SYS_ADMIN) when setting xattr.

A simple reproducer:

$ mkdir upper lower work merged lower/dir
$ sudo mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
$ unshare -m -p -f -U -r bash

Now as root in the user namespace:

\# touch merged/dir/{1,2,3} # this will force a copy up of lower/dir
\# rm -fR merged/*

This ends up failing with -EPERM after the files in dir has been
correctly deleted:

unlinkat(4, "2", 0)                     = 0
unlinkat(4, "1", 0)                     = 0
unlinkat(4, "3", 0)                     = 0
close(4)                                = 0
unlinkat(AT_FDCWD, "merged/dir", AT_REMOVEDIR) = -1 EPERM (Operation not
permitted)

Interestingly, if you don't place files in merged/dir you can remove it,
meaning if upper/dir does not exist, creating the char device file works
properly in that same location.

This patch uses ovl_sb_creator_cred() to get the cred struct from the
superblock mounter and override the old cred with these new ones so that
the whiteout creation is possible because overlay is wrong in assuming that
the creds it will get with prepare_creds will be in the initial user
namespace.  The old cap_raise game is removed in favor of just overriding
the old cred struct.

This patch also drops from ovl_copy_up_one() the following two lines:

override_cred->fsuid = stat->uid;
override_cred->fsgid = stat->gid;

This is because the correct uid and gid are taken directly with the stat
struct and correctly set with ovl_set_attr().
Signed-off-by: NAntonio Murdaca <runcom@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Previously, if a bad inode was found in ocfs2_iget(), -ESTALE was
returned back to the caller anyway.  Since commit d2b9d71a2da7 ("ocfs2:
check/fix inode block for online file check") can handle with return
value from ocfs2_read_locked_inode() now, we know the exact errno
returned for us.

Link: http://lkml.kernel.org/r/1463970656-18413-1-git-send-email-zren@suse.comSigned-off-by: NEric Ren <zren@suse.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When btrfs_copy_from_user isn't able to copy all of the pages, we need
to adjust our accounting to reflect the work that was actually done.

Commit 2e78c927 changed around the decisions a little and we ended up
skipping the accounting adjustments some of the time.  This commit makes
sure that when we don't copy anything at all, we still hop into
the adjustments, and switches to release_bytes instead of write_bytes,
since write_bytes isn't aligned.

The accounting errors led to warnings during btrfs_destroy_inode:

[   70.847532] WARNING: CPU: 10 PID: 514 at fs/btrfs/inode.c:9350 btrfs_destroy_inode+0x2b3/0x2c0
[   70.847536] Modules linked in: i2c_piix4 virtio_net i2c_core input_leds button led_class serio_raw acpi_cpufreq sch_fq_codel autofs4 virtio_blk
[   70.847538] CPU: 10 PID: 514 Comm: umount Tainted: G        W 4.6.0-rc6_00062_g2997da1-dirty #23
[   70.847539] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.0-1.fc24 04/01/2014
[   70.847542]  0000000000000000 ffff880ff5cafab8 ffffffff8149d5e9 0000000000000202
[   70.847543]  0000000000000000 0000000000000000 0000000000000000 ffff880ff5cafb08
[   70.847547]  ffffffff8107bdfd ffff880ff5cafaf8 000024868120013d ffff880ff5cafb28
[   70.847547] Call Trace:
[   70.847550]  [<ffffffff8149d5e9>] dump_stack+0x51/0x78
[   70.847551]  [<ffffffff8107bdfd>] __warn+0xfd/0x120
[   70.847553]  [<ffffffff8107be3d>] warn_slowpath_null+0x1d/0x20
[   70.847555]  [<ffffffff8139c9e3>] btrfs_destroy_inode+0x2b3/0x2c0
[   70.847556]  [<ffffffff812003a1>] ? __destroy_inode+0x71/0x140
[   70.847558]  [<ffffffff812004b3>] destroy_inode+0x43/0x70
[   70.847559]  [<ffffffff810b7b5f>] ? wake_up_bit+0x2f/0x40
[   70.847560]  [<ffffffff81200c68>] evict+0x148/0x1d0
[   70.847562]  [<ffffffff81398ade>] ? start_transaction+0x3de/0x460
[   70.847564]  [<ffffffff81200d49>] dispose_list+0x59/0x80
[   70.847565]  [<ffffffff81201ba0>] evict_inodes+0x180/0x190
[   70.847566]  [<ffffffff812191ff>] ? __sync_filesystem+0x3f/0x50
[   70.847568]  [<ffffffff811e95f8>] generic_shutdown_super+0x48/0x100
[   70.847569]  [<ffffffff810b75c0>] ? woken_wake_function+0x20/0x20
[   70.847571]  [<ffffffff811e9796>] kill_anon_super+0x16/0x30
[   70.847573]  [<ffffffff81365cde>] btrfs_kill_super+0x1e/0x130
[   70.847574]  [<ffffffff811e99be>] deactivate_locked_super+0x4e/0x90
[   70.847576]  [<ffffffff811e9e61>] deactivate_super+0x51/0x70
[   70.847577]  [<ffffffff8120536f>] cleanup_mnt+0x3f/0x80
[   70.847579]  [<ffffffff81205402>] __cleanup_mnt+0x12/0x20
[   70.847581]  [<ffffffff81098358>] task_work_run+0x68/0xa0
[   70.847582]  [<ffffffff810022b6>] exit_to_usermode_loop+0xd6/0xe0
[   70.847583]  [<ffffffff81002e1d>] do_syscall_64+0xbd/0x170
[   70.847586]  [<ffffffff817d4dbc>] entry_SYSCALL64_slow_path+0x25/0x25

This is the test program I used to force short returns from
btrfs_copy_from_user

void *dontneed(void *arg)
{
	char *p = arg;
	int ret;

	while(1) {
		ret = madvise(p, BUFSIZE/4, MADV_DONTNEED);
		if (ret) {
			perror("madvise");
			exit(1);
		}
	}
}

int main(int ac, char **av) {
	int ret;
	int fd;
	char *filename;
	unsigned long offset;
	char *buf;
	int i;
	pthread_t tid;

	if (ac != 2) {
		fprintf(stderr, "usage: dammitdave filename\n");
		exit(1);
	}

	buf = mmap(NULL, BUFSIZE, PROT_READ|PROT_WRITE,
		   MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
	if (buf == MAP_FAILED) {
		perror("mmap");
		exit(1);
	}
	memset(buf, 'a', BUFSIZE);
	filename = av[1];

	ret = pthread_create(&tid, NULL, dontneed, buf);
	if (ret) {
		fprintf(stderr, "error %d from pthread_create\n", ret);
		exit(1);
	}

	ret = pthread_detach(tid);
	if (ret) {
		fprintf(stderr, "pthread detach failed %d\n", ret);
		exit(1);
	}

	while (1) {
		fd = open(filename, O_RDWR | O_CREAT, 0600);
		if (fd < 0) {
			perror("open");
			exit(1);
		}

		for (i = 0; i < ROUNDS; i++) {
			int this_write = BUFSIZE;

			offset = rand() % MAXSIZE;
			ret = pwrite(fd, buf, this_write, offset);
			if (ret < 0) {
				perror("pwrite");
				exit(1);
			} else if (ret != this_write) {
				fprintf(stderr, "short write to %s offset %lu ret %d\n",
					filename, offset, ret);
				exit(1);
			}
			if (i == ROUNDS - 1) {
				ret = sync_file_range(fd, offset, 4096,
				    SYNC_FILE_RANGE_WRITE);
				if (ret < 0) {
					perror("sync_file_range");
					exit(1);
				}
			}
		}
		ret = ftruncate(fd, 0);
		if (ret < 0) {
			perror("ftruncate");
			exit(1);
		}
		ret = close(fd);
		if (ret) {
			perror("close");
			exit(1);
		}
		ret = unlink(filename);
		if (ret) {
			perror("unlink");
			exit(1);
		}

	}
	return 0;
}
Signed-off-by: NChris Mason <clm@fb.com>
Reported-by: NDave Jones <dsj@fb.com>
Fixes: 2e78c927
cc: stable@vger.kernel.org # v4.6
Signed-off-by: NChris Mason <clm@fb.com>

As flexfiles has FF_FLAGS_NO_READ_IO, there is a need to generically
support enforcing that a IOMODE_RW segment will not allow READ I/O.
Signed-off-by: NTom Haynes <loghyr@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: NTom Haynes <loghyr@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The ones that are taking it exclusive, that is...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We should reset i_requested_max_size before waking the waiters.
(zero i_requested_max_size make waiter re-request the max size)
Signed-off-by: NYan, Zheng <zyan@redhat.com>