It never was a 'struct dso' method, so fix that by rename
dso__kernel_findnew() to machine__findnew_kernel().

At some point I'll move it all to the machine.[ch] files, for now
lets ease patch review by not moving too much stuff.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zrxmblgsg5vx0iv4rhvq2f6l@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

mmap-basic fails on arm64.

 4: read samples using the mmap interface: read samples using the mmap interface: FAILED!

This is because arm64 doesn't come with getpgrp() syscall. The syscall
is a BSD compatibility wrapper, Archs that don't define
__ARCH_WANT_SYS_GETPGRP do not have this. Remove it, since getpgid is
already used in the testcase.
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-4-git-send-email-riku.voipio@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since the test being tested is now openat rather than open, rename the
files to make it explicit. The patch is separeted from the first to make
it simpler to deal with any potential conflicts in the Makefile
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-3-git-send-email-riku.voipio@linaro.org
[ Fixed it up wrt Build files ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Multiple perf tests fail on arm64 due to missing open syscall:

 2: detect open syscall event                              : FAILED!

open(2) is a legacy syscall, replaced with openat(2) since 2.6.16.  Thus
new architectures in kernel, such as arm64, don't implement these legacy
syscalls.

The patch replaces all sys_enter_open events with sys_enter_openat,
renames the related tests and test output to avoid confusion.
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-2-git-send-email-riku.voipio@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Newest libunwind does support ARM64, and perf is able to utilize it
also.

This patch enables the perf test dwarf unwind for arm64.

 Test result:
  # ./perf test unwind
  25: Test dwarf unwind                                      : Ok
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1427461681-72971-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The last argument to strtok_r doesn't need to be initialized, its just a
placeholder to make this routine reentrant, but gcc doesn't know about
that and complains, breaking the build, fix it by setting it to NULL.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-8e8rgbg3aom9uarsyqjrsctg@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Thread ref-counting was not done for get_main_thread() meaning that
there was a thread__get() from machine__find_thread() that was not being
paired with thread__put(). Fix that.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432906425-9911-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

By 'make build-test' a warning is found in probe-event.c that, after
commit 419e8738 (perf probe: Show the error reason comes from
invalid DSO) the only user of kernel_get_module_dso() is
open_debuginfo(). Which is not compiled if HAVE_DWARF_SUPPORT not set.

'make build-test' found this problem when make_minimal.

This patch moves kernel_get_module_dso() to HAVE_DWARF_SUPPORT ifdef
section.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1432779905-206143-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Assign input_name, received from program arguments, to file data
structure.
Signed-off-by: NMartin Liska <mliska@suse.cz>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/55685654.2010209@suse.czSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

.. to allow sharing between builtin-record and builtin-top later.  No
code changes, just moved code.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1432749114-904-9-git-send-email-andi@firstfloor.org
[ Rename too generic branch.[ch] name to parse-branch-options.[ch] ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a new utility function to get an function annotation out of existing
code.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1432749114-904-4-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Enhancing the 'Too many events are opened.' error message with hint to
use use 'ulimit -n <limit>' command.

Before:

  $ perf record -e 'sched:*,syscalls:*' ls
  Error:
  Too many events are opened.
  Try again after reducing the number of events.

Now:

  $ perf record -e 'sched:*,syscalls:*' ls
  Error:
  Too many events are opened.
  Probably the maximum number of open file descriptors has been reached.
  Hint: Try again after reducing the number of events.
  Hint: Try increasing the limit with 'ulimit -n <limit>'
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432587114-14924-1-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We have pointers to struct map instances in several places, like in the
hist_entry instances, so we need a way to know when we can destroy them,
otherwise we may either keep leaking them or end up referencing deleted
instances.

Start fixing it by reference counting them.

This patch puts the reference count for struct map in place, replacing
direct map__delete() calls with map__put() ones and then grabbing a
reference count when adding it to the maps struct where maps for a
struct thread are kept.

Next we'll grab reference counts when setting pointers to struct map
instances, in places like in the hist_entry code.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wi19xczk0t2a41r1i2chuio5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

I.e. match RB_CLEAR_NODE() with RB_EMPTY_NODE(), to check that it isn't
in a rb tree at the time of its deletion.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vumvhird765id11zbx00d2r8@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To allow concurrent access, next step: refcount struct map instances, so
that we can ditch maps->removed_maps and stop leaking threads, maps,
then struct DSO needs the same treatment.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o45w2w5dzrza38nzqxnqzhyf@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

That for now has the maps rbtree and the list for the dead maps, that
may be still referenced from some hist_entry, etc.

This paves the way for protecting the rbtree with a lock, then refcount
the maps and finally remove the removed_maps list, as it'll not ne
anymore needed.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fl0fa6142pj8khj97fow3uw0@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix a bug in del_perf_probe_events() which returns an error (-ENOENT)
even if the probes are successfully deleted.

This happens only if the probes are on user-apps and not on kernel,
simply because it doesn't clear the previous error.

So, without this fix, we get an error even though events are being
successfully removed.

  ------
  # ./perf probe -x ./perf del_perf_probe_events
  Added new event:
    probe_perf:del_perf_probe_events (on del_perf_probe_events in ...

  You can now use it in all perf tools, such as:

          perf record -e probe_perf:del_perf_probe_events -aR sleep 1

  # ./perf probe -d \*:\*
  Removed event: probe_perf:del_perf_probe_events
    Error: Failed to delete events.
  ------

This fixes the above error.
  ------
  # ./perf probe -d \*:\*
  Removed event: probe_perf:del_perf_probe_events
  ------
Reported-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/20150527083725.23880.45209.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Show the reason of error when dso__load* fails. This shows when user
gives wrong kernel image or wrong path.

Without this, perf probe shows an obscure message:

  ----
  $ perf probe -k ~/kbin/linux-3.x86_64/vmlinux -L vfs_read
  Failed to find path of kernel module.
    Error: Failed to show lines.
  ----

With this, perf shows appropriate error message:

  ----
  $ perf probe -k ~/kbin/linux-3.x86_64/vmlinux -L vfs_read
  Failed to find the path for kernel: Mismatching build id
    Error: Failed to show lines.
  ----

And:

  ----
  $ perf probe -k /non-exist/kernel/vmlinux -L vfs_read
  Failed to find the path for kernel: No such file or directory
    Error: Failed to show lines.
  ----
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/20150527083718.23880.84100.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Disallow PMU events intel_pt and intel_bts until the tools support them.

By default any PMU is selectable as an event but until the tools have
intel_pt and intel_bts support using them would result in no data being
recorded without any indication as to why.

Before the change:

    $ perf record -e intel_bts// sleep 1
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 0.008 MB perf.data ]
    $ perf report --stdio
    Error:
    The perf.data file has no samples!

After the change:

    $ perf record -e intel_bts// sleep 1
    invalid or unsupported event: 'intel_bts//'
    Run 'perf list' for a list of valid events
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432295653-13989-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Sometimes when debugging large multi-threaded applications it is helpful
to collate all of the latency numbers into one bulk record to get an
idea of what is going on.

This patch does this by merging any entries that belong to the same comm
into one entry and then spits out those totals.

I've also slightly changed the output so you can see how many threads
were merged in the processing.  Here is the new default output format

 -----------------------------------------------------------------------------------------------------------
  Task                 | Runtime ms  | Switches | Average delay ms | Maximum delay ms | Maximum delay at    |
 -----------------------------------------------------------------------------------------------------------
  chrome:(23)          |  740.878 ms |     2612 | avg:    0.022 ms | max:    0.845 ms | max at: 7935.254223 s
  pulseaudio:1523      |   94.440 ms |      597 | avg:    0.027 ms | max:    0.110 ms | max at: 7934.668372 s
  threaded-ml:6042     |   72.554 ms |      386 | avg:    0.035 ms | max:    1.186 ms | max at: 7935.330911 s
  Chrome_IOThread:3832 |   52.388 ms |      456 | avg:    0.021 ms | max:    1.365 ms | max at: 7935.330602 s
  Chrome_ChildIOT:(7)  |   50.694 ms |      743 | avg:    0.021 ms | max:    1.448 ms | max at: 7935.256659 s
  Compositor:5510      |   30.012 ms |      192 | avg:    0.019 ms | max:    0.131 ms | max at: 7936.636815 s
  plugin_audio_th:6043 |   24.828 ms |      314 | avg:    0.018 ms | max:    0.143 ms | max at: 7936.205994 s
  CompositorTileW:(2)  |   14.099 ms |       45 | avg:    0.022 ms | max:    0.153 ms | max at: 7937.521800 s

the (#) after the task is the number of tasks merged, and then if there were
no tasks merged it just shows the pid.  Here is the same trace file with the -p
option to print the per-pid latency numbers

 -----------------------------------------------------------------------------------------------------------
  Task                 | Runtime ms  | Switches | Average delay ms | Maximum delay ms | Maximum delay at    |
 -----------------------------------------------------------------------------------------------------------
  chrome:5500          |  386.872 ms |      387 | avg:    0.023 ms | max:    0.241 ms | max at: 7936.001694 s
  pulseaudio:1523      |   94.440 ms |      597 | avg:    0.027 ms | max:    0.110 ms | max at: 7934.668372 s
  threaded-ml:6042     |   72.554 ms |      386 | avg:    0.035 ms | max:    1.186 ms | max at: 7935.330911 s
  chrome:10226         |   69.710 ms |      251 | avg:    0.023 ms | max:    0.764 ms | max at: 7935.992305 s
  chrome:4267          |   64.551 ms |      418 | avg:    0.021 ms | max:    0.294 ms | max at: 7937.862427 s
  chrome:4827          |   62.268 ms |       54 | avg:    0.029 ms | max:    0.666 ms | max at: 7935.992813 s
  Chrome_IOThread:3832 |   52.388 ms |      456 | avg:    0.021 ms | max:    1.365 ms | max at: 7935.330602 s
  chrome:3776          |   46.150 ms |      349 | avg:    0.023 ms | max:    0.845 ms | max at: 7935.254223 s
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Correct debugging experience is given by passing -Og to compiler.

Do it in a way that supports older compilers
Signed-off-by: NMartin Liska <mliska@suse.cz>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/5564393C.1090104@suse.czSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Assign default value for pointers that are identified by the compiler as
non-initialized.
Signed-off-by: NMartin Liska <mliska@suse.cz>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/5564393C.1090104@suse.czSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In a few more remaining places, for consistency.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-c2n7slwtto29wndfttdrhfrx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As the way DSOs are created are normally via dsos__findnew, so that we
don't have to load the same dso multiple times for multiple maps (think
about /lib64/libc.so.6), so they may be shared and dso__delete() should
be left to be done as part of the map destruction process.

This will all be properly solved by reference counting struct dso, which
will be done soon.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gbrohe1nvkjxw3u5a1bgj3yh@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We use:

  BUG_ON(!RB_EMPTY_NODE(&thread->rb_node));

in the thread destructor as a debugging check to find out about
possibly still referenced thread instances being deleted, to do that
we need to make sure we use RB_CLEAR_NODE() right after rb_erase(),
i.e. that we use the newly introduced rb_erase_init(), that works
just like list_del_init().

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4fcqo5ypy1cjjf15ilb0hn78@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

I was assuming rb_erase() was setting things up like list_del_init, but
the fact that thread__delete() was being sucessfull is because the last
thing before deleting is to remove the thread from the
machine->dead_threads list, using list_del_init(), that has the same
effect as using rb_erase_init()...

Introduce this function so that we can use it when removing objects from
rb_trees.

Then we will be able to BUG_ON(still on a list) in destructors.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-55b16mbtndjyd7zzg8nmnamx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since:

	9fdbf671 "perf tools: do not flush maps on COMM for perf report"

We have no users of this function, nuke it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Luigi Semenzato <semenzato@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hsac1t42ehtva8gut8qe6hih@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

A thread moves from a rb tree to a list, but can't be on both, because
those linkage members are in a union. This is leftover from when I was
debugging thread refcounting and had nuked that union.

It is harmless duplication, as RB_CLEAR_NODE() does again what
INIT_LIST_HEAD does.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hmma9lmip6qlhzhgkhp9tzd1@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It really is a 'struct map' method, and since we're introducing a new
'struct maps' class, fix it to avoid confusion.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xo9ifhk53cfl30wqcuhxpnvl@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Using dso__data_fd() in multi-thread environment is not safe since
returned fd can be closed and/or reused anytime.

So convert it to the dso__data_get/put_fd() pair to protect the access
with lock.

The original dso__data_fd() is deprecated and kept only for testing.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432137821-10853-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It seems that the dso__data_fd() was needed to find a binary type
since open in data_file_size() alone used to fail.

But as it can open the dso fine now, the dso__data_fd() can go away.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432137821-10853-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When dso__data_read_offset/addr() is called without prior dso__data_fd()
(or other functions which call it internally), it failed to open dso in
data_file_size() since its binary type was not identified.

However calling dso__data_fd() in dso__data_read_offset() will hurt
performance as it grabs a global lock everytime.  So factor out the loop
on the binary type in dso__data_fd(), and call it from both.
Reported-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432137821-10853-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It could be used somewhere, so just call map__groups_put() to make sure
we don't delete it prematurely

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-dxmh8mr12i65p8h909vi88cp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now that we have atomic.h, we should convert all of the existing
refcounts to use it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-quzeuy3jwsyod6e06o39cl6y@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To match the convention used elsewhere.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-66oo6yn8upssfeuprwy0il1q@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The evsel and sample arguments are to set iter for later use.  As it
also receives an iter as another argument, just set them before calling
the function.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432022650-18205-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perf_session__peek_event() generally leverages there being a single mmap
of the perf.data file, however on 32-bit platforms when there is more
that 32MiB of data, then there are multiple mmaps, so
perf_session__peek_event() reads from the file.

In that case a couple of bugs were exposed (note how the seg. fault
appears with >32M of data):

   $ perf record --per-thread -e intel_bts// ../rtit-tests/loopy 1000000
   [ perf record: Woken up 13 times to write data ]
   [ perf record: Captured and wrote 24.568 MB perf.data ]
   $ perf script > /dev/null
   $ perf record --per-thread -e intel_bts// ../rtit-tests/loopy 10000000
   [ perf record: Woken up 136 times to write data ]
   [ perf record: Captured and wrote 270.794 MB perf.data ]
   $ perf script > /dev/null
   Segmentation fault (core dumped)

The wrong address was being passed to the readn() function and the
buffer size was not being checked.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1432040746-1755-5-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The libunwind feature would never detect because of the following error:

  $ cat tools/build/feature/test-libunwind.make.output
  /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_stream_buffer_decode'
  /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_uncompressed_size'
  /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_end'
  /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_buffer_decode'
  /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_stream_footer_decode'
  /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_size'
  collect2: error: ld returned 1 exit status

Fix by adding -llzma and re-ordering to match the dependencies.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1432040746-1755-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Parse errors can be reported in struct parse_events_error but the
pointer passed is optional and can be NULL.  Ensure it is not NULL
before dereferencing it.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1432040746-1755-4-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Patch "perf tools: Add location to pmu event terms" moved declarations
for parse_events_term__num() and parse_events_term__str() so that they
were no longer visible in parse-events.y. That can result in segfaults
as the arguments no longer need match the function prototype.

Move the declarations back, changing YYLTYPE pointers to
pointers-to-void because YYLTYPE is not generated until parse-events.y
is processed.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1432040746-1755-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>