As we are now passing the filter data as pointers to the drivers,
we can take the final step and also pass the filter function the
same way. I'm keeping this change separate, as there it's less
obvious that this is a net win.

Upsides of this are:

- The ASoC drivers are completely independent from the DMA engine
  implementation, which simplifies the Kconfig logic and in theory
  allows the same sound drivers to be built in a kernel that supports
  different kinds of dmaengine drivers.

- Consistency with other subsystems and drivers

On the other hand, we have a few downsides:

- The s3c24xx-dma driver now needs to be built-in for the ac97 platform
  device to be instantiated on s3c2440.

- samsung_dmaengine_pcm_config cannot be marked 'const' any more
  because the filter function pointer needs to be set at runtime.
  This is safe as long we don't have multiple different DMA engines
  in thet same system at runtime, but is nonetheless ugly.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support for the STM32 DMA controller.
Signed-off-by: NM'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Since the crossbar is needed for eDMA when it is used on OMAP like
platforms (am335x/am437x and later DRA7xx), select the crossbar to be built
if ARCH_OMAP is set.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Move the code out from arch/arm/common and merge it inside of the dmaengine
driver.
This change is done with as minimal (if eny) functional change to the code
as possible to avoid introducing regression.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

the symbol CONFIG_IDMA64 should rather be CONFIG_INTEL_IDMA64 to conform to
rest of the intel dmaengine drivers. This was found after sorting the
entries and trying to place this odd one
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

dmaengine Kconfig grew over the years, unfortunately without any
order to it. So order by core, driver and client sections, and
sort these sections alphabetically
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Add support for the Analog Devices AXI-DMAC DMA controller. This controller
is a soft peripheral that can be instantiated in a FPGA and is often used
in Analog Devices' reference designs for FPGA platforms.

The peripheral has various configuration options that can be selected at
synthesis time and influence the supported features of the instantiated
peripheral, those options are represented as device-tree properties to
allow the driver to behave accordingly.

The peripheral has a zero latency architecture, which means it is possible
to switch from one to the next descriptor without any delay. This is
archived by having a internal queue which can hold multiple descriptors.
The driver supports this, which means it will submit new descriptors
directly to the hardware until the queue is full and not wait for a
descriptor to complete before the next one is submitted. Interrupts are
used for the descriptor queue flow control.

Currently the driver supports SG, cyclic and interleaved slave DMA.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The 32bit build is creating this warning. Since we don't expect anyone
actually use this on 32bit, restrict ioatdma to be built only on x86_64.
This issue has long existed and only reason it's surfacing due to code
refactoring.

   drivers/dma/ioat/dma.c: In function 'ioat_timer_event':
>> drivers/dma/ioat/dma.c:870:39: warning: passing argument 2 of 'ioat_cleanup_preamble' from incompatible pointer type
     if (ioat_cleanup_preamble(ioat_chan, &phys_complete))
                                          ^
   drivers/dma/ioat/dma.c:577:13: note: expected 'u64 *' but argument is of type 'dma_addr_t *'
    static bool ioat_cleanup_preamble(struct ioatdma_chan *ioat_chan,
                ^
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch adds support for the DMA engine present on Allwinner A10,
A13, A10S and A20 SoCs. This engine has two kinds of channels: normal
and dedicated. The main difference is in the mode of operation;
while a single normal channel may be operating at any given time,
dedicated channels may operate simultaneously provided there is no
overlap of source or destination.

Hardware documentation can be found on A10 User Manual (section 12), A13
User Manual (section 14) and A20 User Manual (section 1.12)
Signed-off-by: NEmilio López <emilio@elopez.com.ar>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Add support for DMA on NXP LPC18xx/43xx platforms which has
a multiplexer in front of the PL080 dma request lines.

The mux is a single register in the LPC18xx/43xx CREG block
and can multiplex up to 4 request lines to each of the 16
lines on the PL080.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Intel integrated DMA (iDMA) 64-bit is a specific IP that is used as a part of
LPSS devices such as HSUART or SPI. The iDMA IP is attached for private
usage on each host controller independently.

While it has similarities with Synopsys DesignWare DMA, the following
distinctions doesn't allow to use the existing driver:
- 64-bit mode with corresponding changes in Hardware Linked List data structure
- many slight differences in the channel registers

Moreover this driver is based on the DMA virtual channels framework that helps
to make the driver cleaner and easy to understand.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add ZTE ZX296702 dma controller support. Only
device tree probe is support currently.
Signed-off-by: NJun Nie <jun.nie@linaro.org>
Reviewed-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This is a new driver for pxa SoCs, which is also compatible with the former
mmp_pdma.

The rationale behind a new driver (as opposed to incremental patching) was :

 - the new driver relies on virt-dma, which obsoletes all the internal
   structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the
   functions

 - mmp_pdma allocates dma coherent descriptors containing not only hardware
   descriptors but linked list information
   The new driver only puts the dma hardware descriptors (ie. 4 u32) into the
   dma pool allocated memory. This changes completely the way descriptors are
   handled

 - the architecture behind the interrupt/tasklet management was rewritten to be
   more conforming to virt-dma

 - the buffers alignment is handled differently
   The former driver assumed that the DMA channel stopped between each
   descriptor. The new one chains descriptors to let the channel running. This
   is a necessary guarantee for real-time high bandwidth usecases such as video
   capture on "old" architectures such as pxa.

 - hot chaining / cold chaining / no chaining
   Whenever possible, submitting a descriptor "hot chains" it to a running
   channel. There is still no guarantee that the descriptor will be issued, as
   the channel might be stopped just before the descriptor is submitted. Yet
   this allows to submit several video buffers, and resubmit a buffer while
   another is under handling.
   As before, dma_async_issue_pending() is the only guarantee to have all the
   buffers issued.
   When an alignment issue is detected (ie. one address in a descriptor is not
   a multiple of 8), if the already running channel is in "aligned mode", the
   channel will stop, and restarted in "misaligned mode" to finished the issued
   list.

 - descriptors reusing
   A submitted, issued and completed descriptor can be reused, ie resubmitted if
   it was prepared with the proper flag (DMA_PREP_ACK).  Only a channel
   resources release will in this case release that buffer.
   This allows a rolling ring of buffers to be reused, where there are several
   thousands of hardware descriptors used (video buffer for example).

Additionally, a set of more casual features is introduced :
 - debugging traces
 - lockless way to know if a descriptor is terminated or not

The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x),
with dmatest, pxa_camera and pxamci.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The DRA7x has more peripherals with DMA requests than the sDMA can handle:
205 vs 127. All DMA requests are routed through the DMA crossbar, which can
be configured to route selected incoming DMA requests to specific sDMA
request.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The xgene-dma driver is only useful on X-Gene SoC.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: Rameshwar Prasad Sahu <rsahu@apm.com>
Cc: Loc Ho <lho@apm.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The RaidEngine is a new FSL hardware used for Raid5/6 acceration.
This patch enables the RaidEngine functionality and provides
hardware offloading capability for memcpy, xor and pq computation.
It works with async_tx.
Signed-off-by: NHarninder Rai <harninder.rai@freescale.com>
Signed-off-by: NXuelin Shi <xuelin.shi@freescale.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch implements the APM X-Gene SoC DMA engine driver. The APM X-Gene
SoC DMA engine consists of 4 DMA channels for performing DMA operations.
These DMA operations include memory copy, scatter-gather memory copy,
raid5 xor, and raid6 p+q offloading.
Signed-off-by: NRameshwar Prasad Sahu <rsahu@apm.com>
Signed-off-by: NLoc Ho <lho@apm.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch adds a driver for the DMA controller found in the Ingenic
JZ4780.

It currently does not implement any support for the programmable firmware
feature of the controller - this is not necessary for most uses. It also
does not take priority into account when allocating channels, it just
allocates the first available channel. This can be implemented later.
Signed-off-by: NAlex Smith <alex.smith@imgtec.com>
Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
[Updated for dmaengine api changes, Add residue support, couple of minor fixes]
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Since the last and the only user of this driver is converted to use dw_dmac we
can remove driver from the tree.

Moreover, besides the driver is unmaintained a long time, it serves for the
DesignWare DMA IP, for which we have already driver in the tree.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The HSU DMA is developed to support High Speed UART controllers found in
particular on Intel MID platforms such as Intel Medfield.

The existing implementation is tighten to the drivers/tty/serial/mfd.c driver
and has a lot of disadvantages. Besides that we would like to get rid of the
old HS UART driver in regarding to extending the 8250 which supports generic
DMAEngine API. That's why the current driver has been developed.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for the IMG Multi-threaded DMA Controller (MDC) found on
certain IMG SoCs.  Currently this driver supports the variant present
on the MIPS-based Pistachio SoC.
Signed-off-by: NAndrew Bresticker <abrestic@chromium.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Everything uses dmaengine now, so there is no reason to
keep this around any longer. Thanks to everyone who was involved
in moving the users over to use the dmaengine APIs.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

_relaxed version of readl and writel are not implemented on all
architecture so COMPILE_TEST has to be removed in order to not cause
some build failures.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The A23 SoC has the same dma engine as the A31 (sun6i), with a
reduced amount of endpoints and physical channels. Add the proper
config data and compatible string to support it.

A slight difference in sun8i is an undocumented register needs
to be toggled for dma to function.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

New atmel DMA controller known as XDMAC, introduced with SAMA5D4
devices.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Per commit "77873803 net_dma: mark broken" net_dma is no longer used
and there is no plan to fix it.

This is the mechanical removal of bits in CONFIG_NET_DMA ifdef guards.
Reverting the remainder of the net_dma induced changes is deferred to
subsequent patches.

Marked for stable due to Roman's report of a memory leak in
dma_pin_iovec_pages():

    https://lkml.org/lkml/2014/9/3/177

Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: David Whipple <whipple@securedatainnovations.ch>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: <stable@vger.kernel.org>
Reported-by: NRoman Gushchin <klamm@yandex-team.ru>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

MX6 processors also use the IMX_SDMA driver, so include it in the help text.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Fixes a compilation error when RESET_CONTROLLER is not enabled in the
configuration.

drivers/dma/sun6i-dma.c: In function 'sun6i_dma_probe':
drivers/dma/sun6i-dma.c:911:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration]
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Although this driver doesn't have any explicit compile-time architecture
dependencies, it is better not to bloat kernels on those platforms, where
this driver isn't needed, unless a compile test is being performed.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch adds a driver for NBPF DMAC IP cores from Renesas, designed for
the AMBA AXI bus.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Select DMA_ENGINE when DMA_OF is selected since
of_dma_xlate_by_chan_id() from drivers/dma/of-dma.c uses
dma_get_slave_channel() from drivers/dma/dmaengine.c

This resolves error reported:

drivers/built-in.o: In function `of_dma_xlate_by_chan_id':
drivers/dma/of-dma.c:253: undefined reference to `dma_get_slave_channel'
Signed-off-by: NAlexander Popov <a13xp0p0v88@gmail.com>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The Allwinner A31 has a 16 channels DMA controller that it shares with the
newer A23. Although sharing some similarities with the DMA controller of the
older Allwinner SoCs, it's significantly different, I don't expect it to be
possible to share the driver for these two.

The A31 Controller is able to memory-to-memory or memory-to-device transfers on
the 16 channels in parallel.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Select DMA_ENGINE instead of DMAENGINE and delete the default
line as the default is 'n' anyways.

Link: https://lkml.org/lkml/2014/7/14/90Reported-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NSudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch implements DMA Engine API for DMA controller on MIC X100
Coprocessors. DMA h/w is shared between host and card s/w.
Channels 0 to 3 are used by host and 4 to 7 are used by card.
Since the DMA device doesn't show up as PCIe device, a virtual bus called mic
bus is created and virtual devices are added on that bus to follow device model.
Allowed dma transfer directions are host to card, card to host and card to card.
Reviewed-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: NNikhil Rao <nikhil.rao@intel.com>
Reviewed-by: NSudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: NSiva Yerramreddy <yshivakrishna@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The APBX-DMA block is also found on MX6Q/MX6DL chips.

Update the help text accordingly.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The pch_dma driver is for a companion chip to the Intel Atom E600
series processors. These are 32-bit x86 processors so the driver is
only needed on X86_32. Add COMPILE_TEST as an alternative, so that the
driver can still be build-tested elsewhere.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This is the driver for the AXI Video Direct Memory Access (AXI
VDMA) core, which is a soft Xilinx IP core that provides high-
bandwidth direct memory access between memory and AXI4-Stream
type video target peripherals. The core provides efficient two
dimensional DMA operations with independent asynchronous read
and write channel operation.

This module works on Zynq (ARM Based SoC) and Microblaze platforms.
Signed-off-by: NSrikanth Thokala <sthokal@xilinx.com>
Acked-by: NJassi Brar <jassisinghbrar@gmail.com>
Reviewed-by: NLevente Kurusa <levex@linux.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

VIDEO_TIMBERDALE selects TIMB_DMA which itself depends on
MFD_TIMBERDALE, so VIDEO_TIMBERDALE should either select or depend on
MFD_TIMBERDALE as well. I chose to make it depend on it because I
think it makes more sense and it is consistent with what other options
are doing.

Adding a "|| HAS_IOMEM" to the TIMB_DMA dependencies silenced the
kconfig warning about unmet direct dependencies but it was wrong:
without MFD_TIMBERDALE, TIMB_DMA is useless as the driver has no
device to bind to.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Add the DMA engine driver for the QCOM Bus Access Manager (BAM) DMA controller
found in the MSM 8x74 platforms.

Each BAM DMA device is associated with a specific on-chip peripheral.  Each
channel provides a uni-directional data transfer engine that is capable of
transferring data between the peripheral and system memory (System mode), or
between two peripherals (BAM2BAM).

The initial release of this driver only supports slave transfers between
peripherals and system memory.
Signed-off-by: NAndy Gross <agross@codeaurora.org>
Tested-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Add Freescale enhanced direct memory(eDMA) controller support.
This module can be found on Vybrid and LS-1 SoCs.
Signed-off-by: NAlison Wang <b18965@freescale.com>
Signed-off-by: NJingchang Lu <b35083@freescale.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>