Bump driver versions to i40e-1.4.12 and i40evf-1.4.8

Change-ID: I0ad82668c4ded04250391fda396ce191a42ab754
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Assign the i40e_pf structure directly instead of using a large memcpy,
which avoids a sparse warning and lets the compiler optimize the copy
since it knows the size of the structure in advance.

Change-ID: I17604e23be2616521eb760290befcb767b52b3f7
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Reviewed-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Driver already counted allocation errors, so print
them as part of the ethtool -S output.  Useful for debugging
if your system is having trouble making memory available for
the driver.

Change-ID: I83839fa86e81e6d80f03b917c88dd3ef9a64dde0
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Delete the unused irq_dynamic_disable function.

Change-ID: Ia46071066babd121c7c90f141b6210b00078de3f
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: NAnjali Singhai <anjali.singhai@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The PHY interrupt mask bits mask out the events we don't want,
so we need to negate the bitmask of events we want.

Change-ID: I273244da5a8d285b6abc84fd68a90f1e6fa0393e
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch implements necessary functions related to port
mirroring features such as add/delete mirror rule, function
to set promiscuous VLAN mode for VSI if mirror rule_type is
"VLAN Mirroring".

Change-ID: Iaf513fd5f188f99dcb977b48f99e73185dfddc40
Signed-off-by: NKiran Patil <kiran.patil@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The driver was being called by VLAN, bonding, teaming operations
that expected to be able to hold locks like rcu_read_lock().

This causes the driver to be held to the requirement to not sleep,
and was found by the kernel debug options for checking sleep
inside critical section, and the locking validator.

Change-ID: Ibc68c835f5ffa8ffe0638ffe910a66fc5649a7f7
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: NNelson, Shannon <shannon.nelson@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The sync_vsi_filter function was allocating memory in such
a way that it could sleep (GFP_KERNEL) which was causing a problem
when called by the team driver under rcu_read_lock(), which cannot
be held while sleeping.  Found with lockdep.

Change-ID: I4e59053cb5eedcf3d0ca151715be3dc42a94bdd5
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Don't bother trying to set up a TSO if the skb->ip_summed is not
set to CHECKSUM_PARTIAL.

Change-ID: I6495b3568e404907a2965b48cf3e2effa7c9ab55
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Driver was using an offset based off a DMA handle while mapping and
unmapping using sync_single_range_for[cpu|device], where it should
be using DMA handle (returned from alloc_coherent) and the offset of the
memory to be sync'd.

Change-ID: I208256565b1595ff0e9171ab852de06b997917c6
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: NNelson, Shannon <shannon.nelson@intel.com>
Reviewed-by: NWilliams, Mitch A <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Missing space in comment, fixed.

Change-ID: I8cdf3ce5994b4a97dcc3eeb33422533918546667
Reported-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The probe routine already had a u32 val declared, no need
to do it again.  Found by W=2 compile.

Change-ID: Id7b65f6d0ef6bb71067d0557f5be0202b6d8741e
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2016-02-16

This series contains updates to i40e/i40evf only.

Shannon adds flags to MAC allocation requests to signify that the MAC VLAN
filters should come from the shared resource pool.  Added a new "set switch
config" admin queue command and the new Cisco VXLAN-GPE cloud tunnel type
for the admin queue commands.  Added more detail to the NVM update debug
message in order to see the full ethtool request data.  Also added a few
more bits of netdev data into the debugfs output for dump VSI.

Pandi fixes the width of two datatypes which were being declared a different
size from what they are assigned.

Anjali fixes an issue where we were not doing write-back on interrupt
throttle for legacy case in x722.

Mitch adds a counter for ARQ overflows since sometimes an ever-growing
number indicates that something bad is happening.  Also added 20G speed for
Tx bandwidth calculations.

Jesse refactors the DCB function based on a community suggestion to change
the multi-level if statement into a switch statement.  Cleans up VF device
IDs in the PF, since it does not need to know them.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John Fastabend says:

====================
tc offload for cls_u32 on ixgbe

This extends the setup_tc framework so it can support more than just
the mqprio offload and push other classifiers and qdiscs into the
hardware. The series here targets the u32 classifier and ixgbe
driver. I worked out the u32 classifier because it is protocol
oblivious and aligns with multiple hardware devices I have access
to. I did an initial implementation on ixgbe because (a) I have one
in my box (b) its a stable driver and (c) it is relatively simple
compared to the other devices I have here but still has enough
flexibility to exercise the features of cls_u32.

I intentionally limited the scope of this series to the basic
feature set. Specifically this uses a 'big hammer' feature bit
to do the offload or not. If the bit is set you get offloaded rules
if it is not then rules will not be offloaded. If we can agree on
this patch series there are some more patches on my queue we can
talk about to make the offload decision per rule using flags similar
to how we do l2 mac updates. Additionally the error strategy can
be improved to be hard aborting, log and continue, etc. I think
these are nice to have improvements but shouldn't block this series.

Also by adding get_parse_graph and set_parse_graph attributes as
in my previous flow_api work we can build programmable devices
and programmatically learn when rules can or can not be loaded
into the hardware. Again future work.

... v3 includes a couple style fixups suggested by Jiri and a
quick fix to ixgbe to check features flag and not dev_features
flag the latter being always set.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch ensures ixgbe will not try to offload hash tables from the
u32 module. The device class does not currently support this so until
it is enabled just abort on these tables.

Interestingly the more flexible your hardware is the less code you
need to implement to guard against these cases.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds initial support for offloading the u32 tc classifier. This
initial implementation only implements a few base matches and actions
to illustrate the use of the infrastructure patches.

However it is an interesting subset because it handles the u32 next
hdr logic to correctly map tcp packets from ip headers using the ihl
and protocol fields. After this is accepted we can extend the match
and action fields easily by updating the model header file.

Also only the drop action is supported initially.

Here is a short test script,

 #tc qdisc add dev eth4 ingress
 #tc filter add dev eth4 parent ffff: protocol ip \
	u32 ht 800: order 1 \
	match ip dst 15.0.0.1/32 match ip src 15.0.0.2/32 action drop

<-- hardware has dst/src ip match rule installed -->

 #tc filter del dev eth4 parent ffff: prio 49152
 #tc filter add dev eth4 parent ffff: protocol ip prio 99 \
	handle 1: u32 divisor 1
 #tc filter add dev eth4 protocol ip parent ffff: prio 99 \
	u32 ht 800: order 1 link 1: \
	offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff
 #tc filter add dev eth4 parent ffff: protocol ip \
	u32 ht 1: order 3 match tcp src 23 ffff action drop

<-- hardware has tcp src port rule installed -->

 #tc qdisc del dev eth4 parent ffff:

<-- hardware cleaned up -->
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds an ixgbe data structure that is used to determine what
headers:fields can be matched and in what order they are supported.

For hardware devices this can be a bit tricky because typically
only pre-programmed (firmware, ucode, rtl) parse graphs will be
supported and we don't yet have an interface to change these from
the OS. So its sort of a you get whatever your friendly vendor
provides affair at the moment.

In the future we can add the get routines and set routines to
update this data structure. One interesting thing to note here
is the data structure here identifies ethernet, ip, and tcp
fields without having to hardcode them as enumerations or use
other identifiers.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a helper function drivers can use to learn if the
action type is a drop action.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Its useful to turn off the qdisc offload feature at a per device
level. This gives us a big hammer to enable/disable offloading.
More fine grained control (i.e. per rule) may be supported later.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows netdev drivers to consume cls_u32 offloads via
the ndo_setup_tc ndo op.

This works aligns with how network drivers have been doing qdisc
offloads for mqprio.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch updates setup_tc so we can pass additional parameters into
the ndo op in a generic way. To do this we provide structured union
and type flag.

This lets each classifier and qdisc provide its own set of attributes
without having to add new ndo ops or grow the signature of the
callback.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ndo_setup_tc() op was added to support drivers offloading tx
qdiscs however only support for mqprio was ever added. So we
only ever added support for passing the number of traffic classes
to the driver.

This patch generalizes the ndo_setup_tc op so that a handle can
be provided to indicate if the offload is for ingress or egress
or potentially even child qdiscs.

CC: Murali Karicheri <m-karicheri2@ti.com>
CC: Shradha Shah <sshah@solarflare.com>
CC: Or Gerlitz <ogerlitz@mellanox.com>
CC: Ariel Elior <ariel.elior@qlogic.com>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Bruce Allan <bruce.w.allan@intel.com>
CC: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bump.

Change-ID: I21aa520a3c8c5f4f562a98019bf8b76b3706c480
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Probe routine already has too many locals, just convert one
used for kzalloc into a kcalloc, eliminating the local.

Change-ID: I349049872b71f858cbeb91ad7836e6767fc7b7d1
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: NAnjali Singhai <anjali.singhai@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The PF doesn't need to know about the VF's device IDs, so remove them.

Change-ID: I62cf0e0fffa1ace586e58e00bc271b10ae440f05
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add a few more bits of netdev data into the debugfs output for dump VSI.
For now, we'll add the features, hw_features, vlan_features, and flags
bitflags and the state. More could be added later if needed.

Also, tweak a couple nearby output lines for output readability.

Change-ID: I9fb5a9da75c9ad7679498ce9ac3ba24d065ddd2e
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Reviewed-by: NBrandeburg, Jesse <jesse.brandeburg@intel.com>
Reviewed-by: NWyborny, Carolyn <carolyn.wyborny@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

If the VF is reset via VFLR, the device will be knocked out of bus
master mode, and the driver will fail to recover from the reset. Fix
this by enabling bus mastering after every reset. In a non-VFLR case,
the bus master bit will not be disabled, and this call will have no effect.

Change-ID: Id515859ac7a691db478222228add6d149e96801a
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add a little more detail to an NVM update debug message in order to
see the full ethtool request data.

Change-ID: Iab10437cb32d6fddc67ee347e7c0b42511e152cd
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Acked-by: NKevin Scott <kevin.c.scott@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This is a simple refactor suggested by the community
to change a multi-level if statement into a switch.

Change-ID: I831cf3c40426022220aa9b43990022d22dfd50db
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When calculating TX bandwidth for VFs, we need to know the link speed to
make sure we don't allocate more bandwidth than is available. Add 20G
link speed to the switch statement so we can support devices that link
at that speed.

Change-ID: I5409f6139d549e5832777db9c22ca0664e0c5f8b
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Sometimes, ARQ overflows are a big deal and tell us that the
firmware/hardware/driver/something is having problems. But normally
they're no big deal. To assist in assessing this, add a counter to
our Ethtool stats. A handful of ARQ overflows during VF init is no
problem. A large, ever-growing number indicates that Something Bad is
happening.

Change-ID: Ie5348bfbc8a54a890559cb00279c28d976a55096
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

We were not doing write-back on interrupt throttle for Legacy case in X722.
This patch fixes that, so we do WB_ON_ITR for Legacy as well. Plus the issue
that we should still be setting NO_ITR if we are touching the DYN_CTLN register
since we do not want to change ITR setting here.

Change-ID: I5db8491ee1544118a389db839cecc93e1bbc480e
Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

lan_vsi_idx and lan_vsi_id are assigned to u16 data sized variables but
declared in u8. This patch fixes the width of the datatype.

Change-ID: If4bcbcc7d32f2b287c51cb33d17879691258dce2
Signed-off-by: NPandi Kumar Maharajan <pandi.maharajan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Bump AQ minor version to 1.5 for new FW features.

Change-ID: I5a790f7f519a2a8921aaa1c5663727dd1897ffec
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Acked-by: NKevin Scott <kevin.c.scott@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add the new AQ command and struct for managing a thermal sensor.

Change-ID: I6f5631839a0f3dca352a6c222f1269a960e2310a
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Nikolay Borisov says:

====================
Namespacify various ip sysctl knobs

This series continues namespacifying more net related knobs.
The focus here is on ip options. Patches 1,3,4,5 namespacify
the respective sysctl knobs. Patch 2 moves some igmp code to the
correct file (and function) and also adds some #ifdef guards to
silence compilation warnings.

Finally, patch 5 exposes the ip fragmentation related sysctls
since all of the knobs are namespaced.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that all the ip fragmentation related sysctls are namespaceified
there is no reason to hide them anymore from "root" users inside
containers.
Signed-off-by: NNikolay Borisov <kernel@kyup.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNikolay Borisov <kernel@kyup.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNikolay Borisov <kernel@kyup.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNikolay Borisov <kernel@kyup.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>