Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The recent acpi boot patch breaks for me: acpi_fadt needs CONFIG_ACPI_BUS.
Signed-off-By: NChris Wedgwood <cw@f00f.org>
Acked-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The compat routine to copy over this data structure was not
handling SI_POLL correctly, breaking various fcntl() variants
in compat tasks.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We were flushing the D-cache excessively for ptrace() processing
and this makes debugging threads so slow as to be totally unusable.

All process page accesses via ptrace() go via access_process_vm().
This routine, for each process page, uses get_user_pages().  That
in turn does a flush_dcache_page() on the child pages before we
copy in/out the ptrace request data.

Therefore, all we need to do after the data movement is:

1) Flush the D-cache pages if the kernel maps the page to a different
   color than userspace does.
2) If we wrote to the page, we need to flush the I-cache on older cpus.

Previously we just flushed the entire cache at the end of a ptrace()
request, and that was beyond stupid.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

SunOS aparently had this weird PTRACE_CONT semantic which
we copied.  If the addr argument is something other than
1, it sets the process program counter to whatever that
value is.

This is different from every other Linux architecture, which
don't do anything with the addr and data args.

This difference in particular breaks the Linux native GDB support
for fork and vfork tracing on sparc and sparc64.

There is no interest in running SunOS binaries using this weird
PTRACE_CONT behavior, so just delete it so we behave like other
platforms do.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A couple message queue system call entries for compat tasks
were not using the necessary compat_sys_*() functions, causing
some glibc test cases to fail.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This case actually can get exercised a lot during an ELF
coredump of a process which contains a lot of non-COW'd
anonymous pages.  GDB has this test case which in partiaular
creates near terabyte process full of ZERO_PAGEes.  It takes
forever to just walk through the page tables because of
all of these spurious cache flushes on sparc64.

With this change it takes only a second or so.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

First ever true git merge. Let's see if it actually works.

This reverts a fs/char_dev.c patch that was merged into BK on March 3.

The problem is that it breaks things ... __register_chrdev_region() has
a block of code, commented "temporary" for over two years now, which
fails rudely during PCMCIA initialization or other register_chrdev()
calls, because it doesn't "degrade to linked list".  This keeps whole
subsystems from working.

A real fix to that "temporary" code should be possible, using some better
scheme to allocate major numbers, but it's not something I want to spend
time on just now.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix debug EBSA285 and RiscPC debugging macros to detect whether the
MMU is enabled.
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>

Convert ARM bitop assembly to a macro.  All bitops follow the same
format, so it's silly duplicating the code when only one or two
instructions are different.
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>

Fix show_regs() to provide a backtrace.  Provide a new __show_regs()
function which implements the common subset of show_regs() and die().
Add prototypes to asm-arm/system.h
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>

h3600_irda_set_speed() had the wrong type for the "speed" argument.
Fix this.
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>

The footbridge ISA RTC was being initialised before we had setup the
kernel timer.  This caused a divide by zero error when the current
time of day is set.  Resolve this by initialising the RTC after
the kernel timer has been initialised.
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>

The conditions that cause these calls to MD_BUG are not kernel bugs, just
oddities in what userspace is asking for.

Also convert analyze_sbs to return void, and the value it returned was
always 0.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is a tiny race when de-registering an MD thread, in that the thread
could disappear before it is set a SIGKILL, causing send_sig to have
problems.  

This is most easily closed by holding tasklist_lock between enabling the
thread to exit (setting ->run to NULL) and telling it to exit.

(akpm: ick.  Needs to use kthread API and stop using signals)
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch does the long overdue updates to MAINTAINERS file for aty128fb
and radeonfb.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the formatting of some comments in 8250.c, and add a note that the
register_serial / unregister_serial shouldn't be used in new code.

We do this here in preference to adding to linux/serial.h, since that is used
by a number of non-8250 drivers which pretend to be 8250.  It is not known
whether it would be appropriate to do so.
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We were failing to close on an error path, resulting in a leak of struct files
which could take a v4 server down fairly quickly....  So call
nfs4_close_delegation instead of just open-coding parts of it.

Simplify the cleanup on delegation failure while we're at it.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

rpc_create_clnt and friends return errors, not NULL, on failure.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixes the error "RPC: failed to contact portmap (errno -512)." when the server
later tries to unregister from the portmapper.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes the lots-of-fsx-linux-instances-cause-a-slow-leak bug.

It's been there since 2.6.6, caused by:

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.5/2.6.5-mm4/broken-out/jbd-move-locked-buffers.patch

That patch moves under-writeout ordered-data buffers onto a separate journal
list during commit.  It took out the old code which was based on a single
list.

The old code (necessarily) had logic which would restart I/O against buffers
which had been redirtied while they were on the committing transaction's
t_sync_datalist list.  The new code only writes buffers once, ignoring
redirtyings by a later transaction, which is good.

But over on the truncate side of things, in journal_unmap_buffer(), we're
treating buffers on the t_locked_list as inviolable things which belong to the
committing transaction, and we just leave them alone during concurrent
truncate-vs-commit.

The net effect is that when truncate tries to invalidate a page whose buffers
are on t_locked_list and have been redirtied, journal_unmap_buffer() just
leaves those buffers alone.  truncate will remove the page from its mapping
and we end up with an anonymous clean page with dirty buffers, which is an
illegal state for a page.  The JBD commit will not clean those buffers as they
are removed from t_locked_list.  The VM (try_to_free_buffers) cannot reclaim
these pages.

The patch teaches journal_unmap_buffer() about buffers which are on the
committing transaction's t_locked_list.  These buffers have been written and
I/O has completed.  We can take them off the transaction and undirty them
within the context of journal_invalidatepage()->journal_unmap_buffer().
Acked-by: N"Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Correct unwinding in error path of mthca_init_icm().
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Decouple table of HCA features from exact HCA device type.  Add a current FW
version field so we can warn when someone is using old FW.  Add support for
new MT25204 HCA.

Remove the warning about mem-free support, since it should be pretty solid at
this point.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix RDMA in mem-free mode: we need to make sure that the RDMA context memory
is mapped for the HCA.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update initialization of receive queue to match new documentation.  This
change is required to support new MT25204 HCA.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up mem-free mode support by introducing mthca_is_memfree() function,
which encapsulates the logic of deciding if a device is mem-free.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Minor tweaks to firmware command handling: kill off an unused get of a value,
and add a little more info to debug output.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Implement fast memory regions (FMRs), where the driver writes directly into
the HCA's translation tables rather than requiring a firmware command.  For
Tavor, MTTs for FMR are separate from regular MTTs, and are reserved at driver
initialization.  This is done to limit the amount of virtual memory needed to
map the MTTs.  For Arbel, there's no such limitation, and all MTTs and MPTs
may be used for FMR or for regular MR.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Split Tavor and Arbel/mem-free index<->hw key munging routines, so that FMR
implementation can call correct implementation without testing HCA type (which
it already knows).
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add mthca_table_find() function, which returns the lowmem address of an entry
in a mem-free HCA's context tables.  This will be used by the FMR
implementation.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add code for SYNC_TPT firmware command, which will be used by FMR
implementation.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add mthca_write64_raw() function, which will be used to write FMR entries that
are in ioremapped PCI memory.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Encapsulate the buddy allocator used for MTT segments.  This cleans up the
code and also gets us ready to add FMR support.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make address handle verbs usable from interrupt context.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fill in missing fields in send completions.
Signed-off-by: NItamar Rabenstein <itamar@mellanox.co.il>
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix bug in MTT allocation in mem-free mode.

I misunderstood the MTT size value returned by the firmware -- it is really
the size of a single MTT entry, since mem-free mode does not segment the MTT
as the original firmware did.  This meant that our MTT addresses ended up
being off by a factor of 8.  This meant that our MTT allocations might
overlap, and so we could overwrite and corrupt earlier memory regions when
writing new MTT entries.

We fix this by always using our 64-byte MTT segment size.  This allows some
simplification of the code as well, since there's no reason to put the MTT
segment size in a variable -- we can always use our enum value directly.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add code to support RDMA and atomic send work requests in mem-free mode.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

CQ numbers are only 24 bits, so only print 6 hex digits and mask off reserved
part when reporting a CQ event.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>