This is to prepare the way for sensible io draining.  Instead of just
removing the lseg from the list, we instead clear the VALID flag
(preventing new io from grabbing references to the lseg) and remove
the reference holding it in the list.  Thus the lseg will be removed
once any io in progress completes and any references still held are
dropped.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Use the small id to pointer translator service to provide a unique callback
identifier per SETCLIENTID call used to identify the v4.0 callback service
associated with the clientid.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We need to ensure that the entries in the nfs_cache_array get cleared
when the page is removed from the page cache. To do so, we use the
freepage address_space operation.

Change nfs_readdir_clear_array to use kmap_atomic(), so that the
function can be safely called from all contexts.

Finally, modify the cache_page_release helper to call
nfs_readdir_clear_array directly, when dealing with an anonymous
page from 'uncached_readdir'.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

At the start of the io paths, try to grab the relevant layout
information.  This will initiate the inode's layout cache, but
stubs ensure the cache stays empty.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NDean Hildebrand <dhildebz@umich.edu>
Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NRicardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We will now use readdir plus even on directories that are very large.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch creates a new idmapper system that uses the request-key function to
place a call into userspace to map user and group ids to names.  The old
idmapper was single threaded, which prevented more than one request from running
at a single time.  This means that a user would have to wait for an upcall to
finish before accessing a cached result.

The upcall result is stored on a keyring of type id_resolver.  See the file
Documentation/filesystems/nfs/idmapper.txt for instructions.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
[Trond: fix up the return value of nfs_idmap_lookup_name and clean up code]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In nfs_open_revalidate(), if the open_context() call returns an inode that
is not the same as dentry->d_inode, then we will call
put_nfs_open_context() with a valid dentry->d_inode, but without the
context being part of the nfsi->open_files list.

In this case too, we want to just skip the list removal, but we do want to
call the ->close_context() callback in order to close the NFSv4 state.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: NJeff Layton <jlayton@redhat.com>

inode may be NULL when put_nfs_open_context is called from nfs_atomic_lookup
before d_add_unique(dentry, inode)
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

create_singlethread_workqueue() is deprecated.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Start moving the 'struct nameidata' dependent code out of the lower level
NFS code in preparation for the removal of open intents.

Instead of the struct nameidata, we pass down a partially initialised
struct nfs_open_context that will be fully initialised by the atomic open
upon success.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

There is no need to flush out writes before calling nfs_wb_all().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch fixes bugzilla entry 14501:
  https://bugzilla.kernel.org/show_bug.cgi?id=14501Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the server has given us a delegation on a file, we _know_ that we can
cache the attribute information even when the user has specified 'noac'.
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

NFS Filehandles and struct fattr are really too large to be allocated on
the stack. This patch adds in a couple of helper functions to allocate them
dynamically instead.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

If the NFS_INO_REVAL_FORCED flag is set, that means that we don't yet have
an up to date attribute cache. Even if we hold a delegation, we must
put a GETATTR on the wire.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Remove the redundant call to filemap_write_and_wait().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Now that we have correct COMMIT semantics in writeback_single_inode, we can
reduce and simplify nfs_wb_all(). Also replace nfs_wb_nocommit() with a
call to filemap_write_and_wait(), which doesn't need to hold the
inode->i_mutex.

With that done, we can eliminate nfs_write_mapping() altogether.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In order to know when we should do opportunistic commits of the unstable
writes, when the VM is doing a background flush, we add a field to count
the number of unstable writes.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The sole purpose of nfs_write_inode is to commit unstable writes, so
move it into fs/nfs/write.c, and make nfs_commit_inode static.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This gives the filesystem more information about the writeback that
is happening.  Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Similar to the fsync issue fixed a while ago in commit
2daea67e we need to write for data to
actually hit the disk before writing out the metadata to guarantee
data integrity for filesystems that modify the inode in the data I/O
completion path.  Currently XFS and NFS handle this manually, and AFS
has a write_inode method that does nothing but waiting for data, while
others are possibly missing out on this.

Fortunately this change has a lot less impact than the fsync change
as none of the write_inode methods starts data writeout of any form
by itself.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

For NFSv2 and v3:

O_DIRECT writes are always synchronous, and aren't cached, so nothing
should be flushed when closing an NFS O_DIRECT file descriptor.  Thus
there are no write errors to report on close(2).

In addition, there's no cached data to verify on the next open(2),
so we don't need clean GETATTR results at close time to compare with.

Thus, there's no need for the nfs_revalidate_inode() call when closing
an NFS O_DIRECT file.  This reduces the number of synchronous
on-the-wire requests for a simple open-write-close of an NFS O_DIRECT
file by roughly 20%.

For NFSv4:

Call nfs4_do_close() with wait set to zero when closing an NFS
O_DIRECT file.  The CLOSE will go on the wire, but the application
won't wait for it to complete.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the NFS_ATTR_FATTR_TYPE field isn't set in fattr->valid, then we should
not set the S_IFMT part of inode->i_mode.
Reported-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Update some fs code to make use of new helper functions introduced
in the previous patch. Should be no significant change in behaviour
(except CIFS now calls send_sig under i_lock, via inode_newsize_ok).
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NMiklos Szeredi <miklos@szeredi.hu>
Cc: linux-nfs@vger.kernel.org
Cc: Trond.Myklebust@netapp.com
Cc: linux-cifs-client@lists.samba.org
Cc: sfrench@samba.org
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The NFSv4 and NFSv4.1 protocols both allow for the redirection of a client
from one server to another in order to support filesystem migration and
replication. For full protocol support, we need to add the ability to
convert a DNS host name into an IP address that we can feed to the RPC
client.

We'll reuse the sunrpc cache, now that it has been converted to work with
rpc_pipefs.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the NFSv4 server doesn't support a POSIX attribute, the generic NFS code
needs to know that, so that it don't keep trying to poll for it.

However, by the same count, if the NFSv4 server does support that
attribute, then we should ensure that the inode metadata is appropriately
labelled as being untrusted. For instance, if we don't know the correct
value of the file's uid, we should certainly not be caching ACLs or ACCESS
results.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Bind data storage objects in the local cache to NFS inodes.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NSteve Dickson <steved@redhat.com>
Acked-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Tested-by: NDaire Byrne <Daire.Byrne@framestore.com>

Register NFS for caching and retrieve the top-level cache index object cookie.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NSteve Dickson <steved@redhat.com>
Acked-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Tested-by: NDaire Byrne <Daire.Byrne@framestore.com>

Close-to-open cache consistency rules really only require us to flush out
writes on calls to close(), and require us to revalidate attributes on the
very last close of the file.

Currently we appear to be doing a lot of extra attribute revalidation
and cache flushes.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The following patch is a combination of a patch by myself and Peter
Staubach.

Trond: If we allow other processes to dirty pages while a process is doing
a consistency sync to disk, we can end up never making progress.

Peter: Attached is a patch which addresses a continuing problem with
the NFS client generating out of order WRITE requests.  While
this is compliant with all of the current protocol
specifications, there are servers in the market which can not
handle out of order WRITE requests very well.  Also, this may
lead to sub-optimal block allocations in the underlying file
system on the server.  This may cause the read throughputs to
be reduced when reading the file from the server.

Peter: There has been a lot of work recently done to address out of
order issues on a systemic level.  However, the NFS client is
still susceptible to the problem.  Out of order WRITE
requests can occur when pdflush is in the middle of writing
out pages while the process dirtying the pages calls
generic_file_buffered_write which calls
generic_perform_write which calls
balance_dirty_pages_rate_limited which ends up calling
writeback_inodes which ends up calling back into the NFS
client to writes out dirty pages for the same file that
pdflush happens to be working with.
Signed-off-by: NPeter Staubach <staubach@redhat.com>
[modification by Trond to merge the two similar patches]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently, filling struct nfs_fattr is more or less an all or nothing
operation, since NFSv2 and NFSv3 have only mandatory attributes.
In NFSv4, some attributes are optional, and so we may simply not be able to
fill in those fields. Furthermore, NFSv4 allows you to specify which
attributes you are interested in retrieving, thus permitting you to
optimise away retrieval of attributes that you know will no change...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>