Remove postcodes from create_bus_instance. If there is an error log
it with dev_err.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Reviewed-by: NTim Sell <timothy.sell@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Get rid of the postcodes from the function chipset_init. They were
being noisy, so don't replace them with errors.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Reviewed-by: NTim Sell <timothy.sell@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove POSTCODES from create_visor_device, when we fail log an error
with dev_err.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Reviewed-by: NTim Sell <timothy.sell@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow retry when allocating memory.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Reviewed-by: NTim Sell <timothy.sell@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Catch and report back errors when visorchannel_write fails.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Reviewed-by: NTim Sell <timothy.sell@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Limit the amount that gets pulled from the queue on each try so we don't
get stuck in an infinite loop if something has gone wrong with the s-Par
firmware.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Reviewed-by: NTim Sell <timothy.sell@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Comment was outdated and did not reflect what was actually happening.
Update the comment to reflect reality.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Reviewed-by: NTim Sell <timothy.sell@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Moved the brace to the left to fix the indentation issue.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Reviewed-by: NTim Sell <timothy.sell@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Shouldn't use uint32 in the kernel, it can be replaced with int here.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Reviewed-by: NTim Sell <timothy.sell@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions in c files don't need to be inlined, get rid of the keyword.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Reviewed-by: NTim Sell <timothy.sell@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There are several different controlvm response functions, consolidate them
to one so we can simplify error handling.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Reviewed-by: NTim Sell <timothy.sell@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver header declares enumeration types without tags. Using
informative tags makes the code easier to understand and
eliminates the need to comment the enum.

Add tags to enumeration types.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver uses preprocessor directives to define multicast filter
constants. These can be defined using an enumeration type. Doing so
adds to the readability and gives the assists the compiler.

Add enumeration type multicast_filter_type to replace preprocessor
defined constants.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Macro includes commented out code. Removing dead code line enables
braces to be removed. Macro is easier to read if the code is clean.

Clean up macro ps_confirm_wait_inc.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Inside loop, code block is guarded with an 'if' statement. Instead of
guarding the block we can invert the 'if' statement conditional and
continue the loop. Doing so allows subsequent code indentation to be
reduced and aids the readability of the code.

Invert 'if' statement conditional, continue loop if new conditional
evaluates to true. Reduce subsequent code indentation level. Do not
change program logic.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The returned pointer from netdev_priv() (void *) does not need to be
cast.

Remove unnecessary cast of void * returned by netdev_priv().
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver currently uses abbreviations 'mgt' and 'mngmt' for
'management'. Also 'power' is sometimes abbreviated to 'pow' and other
times not. It makes the code easier to read and easier to modify if
one abbreviation is used throughout the driver. 'mgmt' is widely
accepted as an abbreviation of 'management'. 'power' can be spelled
out in full, the extra two characters aids readability without an
excessive cost.

Make abbreviation of 'management' uniform across the driver, function
names, preprocessor defined constants, and enumeration types.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch emits CHECK: Please don't use multiple blank lines.

Remove multiple blank lines.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver uses preprocessor directives to define SLP_ASLEEP and
SLP_ACTIVE. These can be defined using an enumeration type. Doing so
adds to the readability and gives the usual compiler benefits of
having an enum. Functions that currently accept integer types can now
use the new enumeration type, further aiding readability.

Add enumeration type sleep_mode_type. Update code that handles sleep
mode to use the new enumeration type.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Host interface connection status is handled using a 32 bit type. Top
byte is used as for FORCE_DISCONNECT status, low bits are used for
connect/disconnect status. Driver masks and checks integers to
ascertain status. If functions are defined to do the masking and
equality check then the details of how the status integer is used are
abstracted away. This makes the code easier to read. Also future
updates to the status handling will be easier because the code is in
one place.

Driver currently uses the CONNECT_STATUS and DISCONNECT_STATUS as
values, as apposed to opaque values. Because of this driver code
checks for equality with CONNECT_STATUS and DISCONNECT_STATUS as
apposed to negating a single check (ie 'foo != CONNECT_STATUS). In
order to maintain the current functionality we define two separate
functions is_connect_status() and is_disconnect_status().

Add functions to abstract the status integer check. Update all sites
that do the check manually to use the newly defined functions.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver contains duplicate code. Host interface has numerous request
functions which allocate memory for a request header. Each request
header is different but all contain, as the first member, a hostif_hdr
structure. This structure has size and event members which need to be
set. By defining a helper function to allocate the memory and set the
initial hostif_hdr members code duplication is reduced.

Add function to allocate  memory for a host interface request. Set
'size' and 'event' members. Remove duplicate code using newly defined
function.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Memory allocation code contains unneeded debug statements, failed
kmalloc() calls typically do not require a debug message. Introduction
of a local 'size' variable allows kmalloc() call to be marginally
cleaner, still uses magic numbers but these require a more substantial
fix. Moving the magic numbers onto a single line opens the way for
further refactoring.

Clean memory allocation code, remove debug statements.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Current switch statement has duplicate code in branches. This code can
be put after the switch statement so as to remove the duplication.

Move code to after switch statement, remove duplicate code. Make error
branch return so as not to execute the moved code block. Do not change
the program logic.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver includes magic numbers. Defining constants or using existing
constants aids the readability of the code.

Magic number '12' is used for two ethernet addresses (6 bytes
each). ETH_ALEN is already defined within the kernel to 6. We can us
the expression '2 * ETH_ALEN' to make this code explicit.

Magic number '20' refers to the data size, in bytes, of a struct
ether_hdr (described in eap_packet.h). We can define a constant for
this purpose, making the code explicit and easier to read.

Define constant. Remove magic numbers, using newly defined constant
and/or expression using existing kernel constant.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, after allocating an sk_buff, driver fills the sk_buff
within code block guarded by a NULL check on the sk_buff. If a NULL
check is done immediately after the allocation, and code returns on
error, then the subsequent code need not be guarded and the level of
indentation may be reduced. This aids the readability of the code and
makes explicit the error path.

Check for NULL directly after allocating the sk_buff, return if
allocation fails. Reduce indentation of subsequent code. Do not change
the program logic.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Code declares and assigns to a local variable that is never used, it
can be safely removed.

Remove unused local variable.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently source and destination ethernet addresses are checked twice,
once in hostif_data_indication() and then again in
hostif_data_indication_wpa(). The second of these functions is called
from the first right after the address check is done. This check is a
duplicate and is unnecessary.

Remove unnecessary duplicate address check.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

All statements removed from the end of void functions
as reported by checkpatch.
Signed-off-by: NValentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl warning about unnecessary whitespace before a
quoted newline.
Signed-off-by: NPaolo Cretaro <melko@frugalware.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace hardcoded function name with __func__
Signed-off-by: NDhananjay Balan <mail@dbalan.in>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch ERRORs: code indent should use tabs where possible.
Signed-off-by: NPaolo Cretaro <melko@frugalware.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds two methods to spk_synth struct: send_xchar and tiocmset, and
creates serial implementation for each of them. It takes existing code
in apollo, audptr and spkout which already fits the behaviour of
send_xchar and tiocmset. In follow-up patches there will be TTY-based
implementations of these methods. Then migrating the synths to TTY will
include repointing these methods to their TTY implementations

Rest of the changes simply make use of serial implementation of these two
functions.
Signed-off-by: NOkash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Function pci_ioremap_bar() will return a NULL pointer if there is no
enough memory. However, in function apci3xxx_auto_attach(), the return
value of function pci_ioremap_bar() is not validated. This may result in
NULL dereference in following access to dev->mmio. This patch fixes the
bug.
Signed-off-by: NPan Bian <bianpan2016@163.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If a process that has mmap'd a COMEDI buffer is being run under a
debugger such as GDB, the buffer contents are inaccessible from the
debugger.  Support the `access()` VM operation to allow the buffer
contents to be accessed by another process.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Most of the items have been taken care of by a clean up series. Remove
the completed items and add a few new ones.
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This never got set in the ioctl. Properly set a return value of 0 on
success.
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

ion_handle was introduced as an abstraction to represent a reference to
a buffer via an ion_client. As frameworks outside of Ion evolved, the dmabuf
emerged as the preferred standard for use in the kernel. This has made
the ion_handle an unnecessary abstraction and prone to race
conditions. ion_client is also now only used internally. We have enough
mechanisms for race conditions and leaks already so just drop ion_handle
and ion_client. This also includes ripping out most of the debugfs
infrastructure since much of that was tied to clients and handles.
The debugfs infrastructure was prone to give confusing data (orphaned
allocations) so it can be replaced with something better if people
actually want it.
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Nobody uses this interface externally. Drop it.
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The current model of Ion heap registration  is based on the outdated
model of board files. The replacement for board files (devicetree)
isn't a good replacement for what Ion wants to do. In actuality, Ion
wants to show what memory is available in the system for something else
to figure out what to use. Switch to a model where Ion creates its
device unconditionally and heaps are registed as available regions.
Currently, only system and CMA heaps are converted over to the new
model. Carveout and chunk heaps can be converted over when someone wants
to figure out how.
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Ion current has ion_priv.h and ion.h as header files. ion.h was intended
to be used for public APIs but Ion never ended up really having anything
public. Combine the two headers so there is only one internal header.
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>