Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 154
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 17 1月, 2014 4 次提交
  3. 16 1月, 2014 9 次提交
  5. 15 1月, 2014 2 次提交
  7. 14 1月, 2014 2 次提交
    • R
      x86/apic: Read Error Status Register correctly · 60283df7
      由 Richard Weinberger 提交于 
      Currently we do a read, a dummy write and a final read to fetch
the error code. The value from the final read is taken.
This is not the recommended way and leads to corrupted/lost ESR
values.

Intel(c) 64 and IA-32 Architectures Software Developer's Manual,
Combined Volumes 1, 2ABC, 3ABC, Section 10.5.3 states:

  Before attempt to read from the ESR, software should first
  write to it. (The value written does not affect the values read
  subsequently; only zero may be written in x2APIC mode.) This
  write clears any previously logged errors and updates the ESR
  with any errors detected since the last write to the ESR.
  This write also rearms the APIC error interrupt triggering
  mechanism.

This patch removes the first read such that we are conform with
the manual.

On my (very old) Pentium MMX SMP system this patch fixes the
issue that APIC errors:

  a) are not always reported and
  b) are reported with false error numbers.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Cc: seiji.aguchi@hds.com
Cc: rientjes@google.com
Cc: konrad.wilk@oracle.com
Cc: bp@alien8.de
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1389685487-20872-1-git-send-email-richard@nod.atSigned-off-by: NIngo Molnar <mingo@kernel.org>
      60283df7
    • P
      sched/preempt: Fix up missed PREEMPT_NEED_RESCHED folding · 8cb75e0c
      由 Peter Zijlstra 提交于 
      With various drivers wanting to inject idle time; we get people
calling idle routines outside of the idle loop proper.

Therefore we need to be extra careful about not missing
TIF_NEED_RESCHED -> PREEMPT_NEED_RESCHED propagations.

While looking at this, I also realized there's a small window in the
existing idle loop where we can miss TIF_NEED_RESCHED; when it hits
right after the tif_need_resched() test at the end of the loop but
right before the need_resched() test at the start of the loop.

So move preempt_fold_need_resched() out of the loop where we're
guaranteed to have TIF_NEED_RESCHED set.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-x9jgh45oeayzajz2mjt0y7d6@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      8cb75e0c
  9. 13 1月, 2014 7 次提交
    • P
      sched/clock, x86: Avoid a runtime condition in native_sched_clock() · 10b033d4
      由 Peter Zijlstra 提交于 
      Use a static_key to avoid touching tsc_disabled and a runtime
condition in native_sched_clock() -- less cachelines touched is always
better.

                        MAINLINE   PRE       POST

    sched_clock_stable: 1          1         1
    (cold) sched_clock: 329841     215295    213039
    (cold) local_clock: 301773     220773    216084
    (warm) sched_clock: 38375      25659     25231
    (warm) local_clock: 100371     27242     27601
    (warm) rdtsc:       27340      24208     24203
    sched_clock_stable: 0          0         0
    (cold) sched_clock: 382634     237019    240055
    (cold) local_clock: 396890     294819    299942
    (warm) sched_clock: 38194      25609     25276
    (warm) local_clock: 143452     71232     73232
    (warm) rdtsc:       27345      24243     24244
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-hrz87bo37qke25bty6pnfy4b@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      10b033d4
    • P
      sched/clock, x86: Use a static_key for sched_clock_stable · 35af99e6
      由 Peter Zijlstra 提交于 
      In order to avoid the runtime condition and variable load turn
sched_clock_stable into a static_key.

Also provide a shorter implementation of local_clock() and
cpu_clock(int) when sched_clock_stable==1.

                        MAINLINE   PRE       POST

    sched_clock_stable: 1          1         1
    (cold) sched_clock: 329841     221876    215295
    (cold) local_clock: 301773     234692    220773
    (warm) sched_clock: 38375      25602     25659
    (warm) local_clock: 100371     33265     27242
    (warm) rdtsc:       27340      24214     24208
    sched_clock_stable: 0          0         0
    (cold) sched_clock: 382634     235941    237019
    (cold) local_clock: 396890     297017    294819
    (warm) sched_clock: 38194      25233     25609
    (warm) local_clock: 143452     71234     71232
    (warm) rdtsc:       27345      24245     24243
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-eummbdechzz37mwmpags1gjr@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      35af99e6
    • P
      sched/clock, x86: Rewrite cyc2ns() to avoid the need to disable IRQs · 20d1c86a
      由 Peter Zijlstra 提交于 
      Use a ring-buffer like multi-version object structure which allows
always having a coherent object; we use this to avoid having to
disable IRQs while reading sched_clock() and avoids a problem when
getting an NMI while changing the cyc2ns data.

                        MAINLINE   PRE        POST

    sched_clock_stable: 1          1          1
    (cold) sched_clock: 329841     331312     257223
    (cold) local_clock: 301773     310296     309889
    (warm) sched_clock: 38375      38247      25280
    (warm) local_clock: 100371     102713     85268
    (warm) rdtsc:       27340      27289      24247
    sched_clock_stable: 0          0          0
    (cold) sched_clock: 382634     372706     301224
    (cold) local_clock: 396890     399275     399870
    (warm) sched_clock: 38194      38124      25630
    (warm) local_clock: 143452     148698     129629
    (warm) rdtsc:       27345      27365      24307
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-s567in1e5ekq2nlyhn8f987r@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      20d1c86a
    • P
      x86/irq: Fix kbuild warning in smp_irq_move_cleanup_interrupt() · c7a730fa
      由 Prarit Bhargava 提交于 
      Fengguang Wu's 0day kernel build service reported the following build warning:

  arch/x86/kernel/apic/io_apic.c:2211
  smp_irq_move_cleanup_interrupt() warn: always true condition '(irq <= -1) => (0-u32max <= (-1))'

because irq is defined as an unsigned int instead of an int.
Fix this trivial error by redefining irq as a signed int.  The
remaining consumers of the int are okay.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Link: http://lkml.kernel.org/r/1389620420-7110-1-git-send-email-prarit@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      c7a730fa
    • P
      sched/clock, x86: Move some cyc2ns() code around · 57c67da2
      由 Peter Zijlstra 提交于 
      There are no __cycles_2_ns() users outside of arch/x86/kernel/tsc.c,
so move it there.

There are no cycles_2_ns() users.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-01lslnavfgo3kmbo4532zlcj@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      57c67da2
    • P
      sched/clock, x86: Use mul_u64_u32_shr() for native_sched_clock() · 5dd12c21
      由 Peter Zijlstra 提交于 
      Use mul_u64_u32_shr() so that x86_64 can use a single 64x64->128 mul.

Before:

0000000000000560 <native_sched_clock>:
 560:   44 8b 1d 00 00 00 00    mov    0x0(%rip),%r11d        # 567 <native_sched_clock+0x7>
 567:   55                      push   %rbp
 568:   48 89 e5                mov    %rsp,%rbp
 56b:   45 85 db                test   %r11d,%r11d
 56e:   75 4f                   jne    5bf <native_sched_clock+0x5f>
 570:   0f 31                   rdtsc
 572:   89 c0                   mov    %eax,%eax
 574:   48 c1 e2 20             shl    $0x20,%rdx
 578:   48 c7 c1 00 00 00 00    mov    $0x0,%rcx
 57f:   48 09 c2                or     %rax,%rdx
 582:   48 c7 c7 00 00 00 00    mov    $0x0,%rdi
 589:   65 8b 04 25 00 00 00    mov    %gs:0x0,%eax
 590:   00
 591:   48 98                   cltq
 593:   48 8b 34 c5 00 00 00    mov    0x0(,%rax,8),%rsi
 59a:   00
 59b:   48 89 d0                mov    %rdx,%rax
 59e:   81 e2 ff 03 00 00       and    $0x3ff,%edx
 5a4:   48 c1 e8 0a             shr    $0xa,%rax
 5a8:   48 0f af 14 0e          imul   (%rsi,%rcx,1),%rdx
 5ad:   48 0f af 04 0e          imul   (%rsi,%rcx,1),%rax
 5b2:   5d                      pop    %rbp
 5b3:   48 03 04 3e             add    (%rsi,%rdi,1),%rax
 5b7:   48 c1 ea 0a             shr    $0xa,%rdx
 5bb:   48 01 d0                add    %rdx,%rax
 5be:   c3                      retq

After:

0000000000000550 <native_sched_clock>:
 550:   8b 3d 00 00 00 00       mov    0x0(%rip),%edi        # 556 <native_sched_clock+0x6>
 556:   55                      push   %rbp
 557:   48 89 e5                mov    %rsp,%rbp
 55a:   48 83 e4 f0             and    $0xfffffffffffffff0,%rsp
 55e:   85 ff                   test   %edi,%edi
 560:   75 2c                   jne    58e <native_sched_clock+0x3e>
 562:   0f 31                   rdtsc
 564:   89 c0                   mov    %eax,%eax
 566:   48 c1 e2 20             shl    $0x20,%rdx
 56a:   48 09 c2                or     %rax,%rdx
 56d:   65 48 8b 04 25 00 00    mov    %gs:0x0,%rax
 574:   00 00
 576:   89 c0                   mov    %eax,%eax
 578:   48 f7 e2                mul    %rdx
 57b:   65 48 8b 0c 25 00 00    mov    %gs:0x0,%rcx
 582:   00 00
 584:   c9                      leaveq
 585:   48 0f ac d0 0a          shrd   $0xa,%rdx,%rax
 58a:   48 01 c8                add    %rcx,%rax
 58d:   c3                      retq

                        MAINLINE   POST

    sched_clock_stable: 1	   1
    (cold) sched_clock: 329841     331312
    (cold) local_clock: 301773     310296
    (warm) sched_clock: 38375      38247
    (warm) local_clock: 100371     102713
    (warm) rdtsc:       27340      27289
    sched_clock_stable: 0          0
    (cold) sched_clock: 382634     372706
    (cold) local_clock: 396890     399275
    (warm) sched_clock: 38194      38124
    (warm) local_clock: 143452     148698
    (warm) rdtsc:       27345      27365
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-piu203ses5y1g36bnyw2n16x@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      5dd12c21
    • D
      sched: Add new scheduler syscalls to support an extended scheduling parameters ABI · d50dde5a
      由 Dario Faggioli 提交于 
      Add the syscalls needed for supporting scheduling algorithms
with extended scheduling parameters (e.g., SCHED_DEADLINE).

In general, it makes possible to specify a periodic/sporadic task,
that executes for a given amount of runtime at each instance, and is
scheduled according to the urgency of their own timing constraints,
i.e.:

 - a (maximum/typical) instance execution time,
 - a minimum interval between consecutive instances,
 - a time constraint by which each instance must be completed.

Thus, both the data structure that holds the scheduling parameters of
the tasks and the system calls dealing with it must be extended.
Unfortunately, modifying the existing struct sched_param would break
the ABI and result in potentially serious compatibility issues with
legacy binaries.

For these reasons, this patch:

 - defines the new struct sched_attr, containing all the fields
   that are necessary for specifying a task in the computational
   model described above;

 - defines and implements the new scheduling related syscalls that
   manipulate it, i.e., sched_setattr() and sched_getattr().

Syscalls are introduced for x86 (32 and 64 bits) and ARM only, as a
proof of concept and for developing and testing purposes. Making them
available on other architectures is straightforward.

Since no "user" for these new parameters is introduced in this patch,
the implementation of the new system calls is just identical to their
already existing counterpart. Future patches that implement scheduling
policies able to exploit the new data structure must also take care of
modifying the sched_*attr() calls accordingly with their own purposes.
Signed-off-by: NDario Faggioli <raistlin@linux.it>
[ Rewrote to use sched_attr. ]
Signed-off-by: NJuri Lelli <juri.lelli@gmail.com>
[ Removed sched_setscheduler2() for now. ]
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-3-git-send-email-juri.lelli@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      d50dde5a
  11. 12 1月, 2014 6 次提交
  13. 10 1月, 2014 1 次提交
  15. 07 1月, 2014 1 次提交
  17. 05 1月, 2014 3 次提交
  19. 04 1月, 2014 1 次提交
  21. 03 1月, 2014 2 次提交
    • D
      x86/efi: parse_efi_setup() build fix · 5c12af0c
      由 Dave Young 提交于 
      In case without CONFIG_EFI, there will be below build error:

   arch/x86/built-in.o: In function `setup_arch':
  (.init.text+0x9dc): undefined reference to `parse_efi_setup'

Thus fix it by adding blank inline function in asm/efi.h
Also remove an unused declaration for variable efi_data_len.
Signed-off-by: NDave Young <dyoung@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      5c12af0c
    • D
      x86: ksysfs.c build fix · 41a34cec
      由 Dave Young 提交于 
      kbuild test robot report below error for randconfig:

  arch/x86/kernel/ksysfs.c: In function 'get_setup_data_paddr':
  arch/x86/kernel/ksysfs.c:81:3: error: implicit declaration of function 'ioremap_cache' [-Werror=implicit-function-declaration]
  arch/x86/kernel/ksysfs.c:86:3: error: implicit declaration of function 'iounmap' [-Werror=implicit-function-declaration]

Fix it by including <asm/io.h> in ksysfs.c
Signed-off-by: NDave Young <dyoung@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      41a34cec
  23. 02 1月, 2014 1 次提交
    • J
      KVM: nVMX: Unconditionally uninit the MMU on nested vmexit · 29bf08f1
      由 Jan Kiszka 提交于 
      Three reasons for doing this: 1. arch.walk_mmu points to arch.mmu anyway
in case nested EPT wasn't in use. 2. this aligns VMX with SVM. But 3. is
most important: nested_cpu_has_ept(vmcs12) queries the VMCS page, and if
one guest VCPU manipulates the page of another VCPU in L2, we may be
fooled to skip over the nested_ept_uninit_mmu_context, leaving mmu in
nested state. That can crash the host later on if nested_ept_get_cr3 is
invoked while L1 already left vmxon and nested.current_vmcs12 became
NULL therefore.

Cc: stable@kernel.org
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
      29bf08f1
  25. 31 12月, 2013 1 次提交