- 15 10月, 2015 1 次提交
-
-
由 Michael Ellerman 提交于
Make it entirely clear in the Makefile that we always build the pci related files by moving them to obj-y. Note that CONFIG_EEH is now always enabled on pseries, because it depends on PSERIES && PCI. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 05 10月, 2015 1 次提交
-
-
由 Andy Shevchenko 提交于
Extract a new module to share the code between other modules. There is no functional change. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 29 1月, 2014 1 次提交
-
-
由 Deepthi Dharwar 提交于
Move the file from arch specific pseries/processor_idle.c to drivers/cpuidle/cpuidle-pseries.c Make the relevant Makefile and Kconfig changes. Also, introduce Kconfig.powerpc in drivers/cpuidle for all powerpc cpuidle drivers. Signed-off-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 11 10月, 2013 1 次提交
-
-
由 Michael Ellerman 提交于
Add support for the arch_get_random_long() hook based on the H_RANDOM hypervisor call. We trust the hypervisor to provide us with random data, ie. we don't whiten it in anyway. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 28 8月, 2013 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This file is entirely pseries specific nowadays, so move it out of arch/powerpc/kernel where it doesn't belong anymore. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 20 6月, 2013 1 次提交
-
-
由 Gavin Shan 提交于
The patch moves the common part of EEH core into arch/powerpc/kernel directory so that we needn't PPC_PSERIES while compiling POWERNV platform: * Move the EEH common part into arch/powerpc/kernel * Move the functions for PCI hotplug from pSeries platform to arch/powerpc/kernel/pci-hotplug.c * Move CONFIG_EEH from arch/powerpc/platforms/pseries/Kconfig to arch/powerpc/platforms/Kconfig * Adjust makefile accordingly Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 10 1月, 2013 1 次提交
-
-
由 Anton Blanchard 提交于
Finally remove the two level TOC and build with -mcmodel=medium. Unfortunately we can't build modules with -mcmodel=medium due to the tricks the kernel module loader plays with percpu data: # -mcmodel=medium breaks modules because it uses 32bit offsets from # the TOC pointer to create pointers where possible. Pointers into the # percpu data area are created by this method. # # The kernel module loader relocates the percpu data section from the # original location (starting with 0xd...) to somewhere in the base # kernel percpu data space (starting with 0xc...). We need a full # 64bit relocation for this to work, hence -mcmodel=large. On older kernels we fall back to the two level TOC (-mminimal-toc) Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 10 9月, 2012 1 次提交
-
-
由 Gavin Shan 提交于
For one particular PE, it's only meaningful in the ancestor PHB domain. Therefore, each PHB should have its own PE hierarchy tree to trace those PEs created against the PHB. The patch creates PEs for the PHBs and put those PEs into the global link list traced by "eeh_phb_pe". The link list of PEs would be first level of overall PE hierarchy tree across the system. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 09 3月, 2012 2 次提交
-
-
由 Gavin Shan 提交于
Original EEH implementation depends on struct pci_dn heavily. However, EEH shouldn't depend on that actually because EEH needn't share much information with other PCI components. That's to say, EEH should have worked independently. The patch introduces struct eeh_dev so that EEH core components needn't be working based on struct pci_dn in future. Also, struct pci_dn, struct eeh_dev instances are created in dynamic fasion and the binding with EEH device, OF node, PCI device is implemented as well. The EEH devices are created after PHBs are detected and initialized, but PCI emunation hasn't started yet. Apart from that, PHB might be created dynamically through DLPAR component and the EEH devices should be creatd as well. Another case might be OF node is created dynamically by DR (Dynamic Reconfiguration), which has been defined by PAPR. For those OF nodes created by DR, EEH devices should be also created accordingly. The binding between EEH device and OF node is done while the EEH device is initially created. The binding between EEH device and PCI device should be done after PCI emunation is done. Besides, PCI hotplug also needs the binding so that the EEH devices could be traced from the newly coming PCI buses or PCI devices. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
EEH has been implemented on RTAS-compliant pSeries platform. That's to say, the EEH operations will be implemented through RTAS calls eventually. The situation limited feasible extension on EEH. In order to support EEH on multiple platforms like pseries and powernv simutaneously. We have to split the platform dependent EEH options up out of current implementation. The patch addresses supporting EEH on multiple platforms. The pseries platform dependent EEH operations will be abstracted by struct eeh_ops. EEH core components will be built based on the registered EEH operations. With the mechanism, what the individual platform needs to do is implement platform dependent EEH operations. For now, the pseries platform is covered under the mechanism. That means we have to think about other platforms to support EEH, like powernv. Besides, we only have framework for the mechanism and we have to implement it for pseries platform later. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 23 2月, 2012 1 次提交
-
-
由 Mahesh Salgaonkar 提交于
Remove the phyp assisted dump implementation which is not is use. Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 08 12月, 2011 1 次提交
-
-
由 Deepthi Dharwar 提交于
This patch implements a back-end cpuidle driver for pSeries based on pseries_dedicated_idle_loop and pseries_shared_idle_loop routines. The driver is built only if CONFIG_CPU_IDLE is set. This cpuidle driver uses global registration of idle states and not per-cpu. Signed-off-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: NTrinabh Gupta <g.trinabh@gmail.com> Signed-off-by: NArun R Bharadwaj <arun.r.bharadwaj@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 06 5月, 2011 1 次提交
-
-
由 Tseng-Hui (Frank) Lin 提交于
This patch adds support for handling IO Event interrupts which come through at the /event-sources/ibm,io-events device tree node. The interrupts come through ibm,io-events device tree node are generated by the firmware to report IO events. The firmware uses the same interrupt to report multiple types of events for multiple devices. Each device may have its own event handler. This patch implements a plateform interrupt handler that is triggered by the IO event interrupts come through ibm,io-events device tree node, pull in the IO events from RTAS and call device event handlers registered in the notifier list. Device event handlers are expected to use atomic_notifier_chain_register() and atomic_notifier_chain_unregister() to register/unregister their event handler in pseries_ioei_notifier_list list with IO event interrupt. Device event handlers are responsible to identify if the event belongs to the device event handler. The device event handle should return NOTIFY_OK after the event is handled if the event belongs to the device event handler, or NOTIFY_DONE otherwise. Signed-off-by: NTseng-Hui (Frank) Lin <thlin@us.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 20 4月, 2011 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This is a significant rework of the XICS driver, too significant to conveniently break it up into a series of smaller patches to be honest. The driver is moved to a more generic location to allow new platforms to use it, and is broken up into separate ICP and ICS "backends". For now we have the native and "hypervisor" ICP backends and one common RTAS ICS backend. The driver supports one ICP backend instanciation, and many ICS ones, in order to accomodate future platforms with multiple possibly different interrupt "sources" mechanisms. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 29 11月, 2010 1 次提交
-
-
由 Vaidyanathan Srinivasan 提交于
Create sysfs interface to export data from H_BEST_ENERGY hcall that can be used by administrative tools on supported pseries platforms for energy management optimizations. sys/device/system/cpu/pseries_(de)activate_hint_list and sys/device/system/cpu/cpuN/pseries_(de)activate_hint will provide hints for activation and deactivation of cpus respectively. These hints are abstract number given by the hypervisor based on the extended knowledge the hypervisor has regarding the system topology and resource mappings. The activate and the deactivate sysfs entry is for the two distinct operations that we could do for energy savings. When we have more capacity than required, we could deactivate few core to save energy. The choice of the core to deactivate will be based on /sys/devices/system/cpu/deactivate_hint_list. The comma separated list of cpus (cores) will be the preferred choice. If we have to activate some of the deactivated cores, then /sys/devices/system/cpu/activate_hint_list will be used. The per-cpu file /sys/device/system/cpu/cpuN/pseries_(de)activate_hint further provide more fine grain information by exporting the value of the hint itself. Added new driver module arch/powerpc/platforms/pseries/pseries_energy.c under new config option CONFIG_PSERIES_ENERGY Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 13 10月, 2010 2 次提交
-
-
由 matt mooney 提交于
Replace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y. Signed-off-by: Nmatt mooney <mfm@muteddisk.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Nathan Fontenot 提交于
Enable partition migration in the kernel. To do this a new sysfs file, /sys/kernel/mobility/migration, is created. In order to initiate a migration the stream id (generated by the HMC managing the system) is written to this file. After a migration occurs, and what is the majority of this code, the device tree needs to be updated for the new system the partition is running on. This is done via the ibm,update-nodes and ibm,update-properties rtas calls which return information regarding which nodes and properties of the device tree are to be added/removed/updated. Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 09 7月, 2010 1 次提交
-
-
由 Brian King 提交于
Enables support for HMC initiated partition hibernation. This is a firmware assisted hibernation, since the firmware handles writing the memory out to disk, along with other partition information, so we just mimic suspend to ram. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 21 5月, 2010 1 次提交
-
-
由 Mark Nelson 提交于
At the moment only the RAS code uses event-sources interrupts (for EPOW events and internal errors) so request_ras_irqs() (which actually requests the event-sources interrupts) is found in ras.c and is static. We want to be able to use event-sources interrupts in other pseries code, so let's rename request_ras_irqs() to request_event_sources_irqs() and move it to event_sources.c. This will be used in an upcoming patch that adds support for IO Event interrupts that come through as event sources. Signed-off-by: NMark Nelson <markn@au1.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 09 12月, 2009 1 次提交
-
-
由 Nathan Fontenot 提交于
The Dynamic Logical Partitioning capabilities of the powerpc pseries platform allows for the addition and removal of resources (i.e. CPU's, memory, and PCI devices) from a partition. The removal of a resource involves removing the resource's node from the device tree and then returning the resource to firmware via the rtas set-indicator call. To add a resource, it is first obtained from firmware via the rtas set-indicator call and then a new device tree node is created using the ibm,configure-coinnector rtas call and added to the device tree. This patch provides the kernel DLPAR infrastructure in a new filed named dlpar.c. The functionality provided is for acquiring and releasing a resource from firmware and the parsing of information returned from the ibm,configure-connector rtas call. Additionally this exports the pSeries reconfiguration notifier chain so that it can be invoked when device tree updates are made. Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com> Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 30 10月, 2009 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The CHRP code has some fishy timer based code to scan the RTAS event log, which uses a 1KB stack buffer and doesn't even use the results. The pSeries code as a nicer daemon that allows userspace to read the event log and basically uses the same RTAS interface This patch moves rtasd.c out of platform/pseries and makes it usable by CHRP, after removing the old crufty event log mechanism in there. The nvram logging part of the daemon is still only available on 64-bit since the underlying nvram management routines aren't currently shared. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 24 3月, 2009 1 次提交
-
-
由 Jeremy Kerr 提交于
pseries SPLPAR machines are able to retrieve a log of dispatch and preempt events from the hypervisor. With this information, we can see when and why each dispatch & preempt is occuring. This change adds a set of debugfs files allowing userspace to read this dispatch log. Based on initial patches from Nishanth Aravamudan <nacc@us.ibm.com>. Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 11 3月, 2009 1 次提交
-
-
由 Michael Ellerman 提交于
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 25 7月, 2008 1 次提交
-
-
由 Brian King 提交于
Adds a collaborative memory manager, which acts as a simple balloon driver for System p machines that support cooperative memory overcommitment (CMO). Adds a platform configuration option for CMO called PPC_SMLPAR. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NRobert Jennings <rcj@linux.vnet.ibm.com> Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 29 4月, 2008 1 次提交
-
-
由 Badari Pulavarty 提交于
Hotplug memory remove notifier for 64-bit powerpc. This gets invoked by writing to /proc/ppc64/ofdt the string "remove_node " followed by the firmware device tree pathname of the node that needs to be removed. In response, this adjusts the sections and removes sysfs entries by calling __remove_pages(). Then it calls arch-specific code to get rid of the hardware MMU mappings for the section of memory. Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com> Reviewed-by: NMichael Ellerman <michael@ellerman.id.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 24 4月, 2008 1 次提交
-
-
由 Michael Ellerman 提交于
Add a DEBUG config setting which turns on all (most) of the debugging under platforms/pseries. To have this take effect we need to remove all the #undef DEBUG's, in various files. We leave the #undef DEBUG in platforms/pseries/lpar.c, as this enables debugging printks from the low-level hash table routines, and tends to make your system unusable. If you want those enabled you still have to turn them on by hand. Also some of the RAS code has a DEBUG block which causes a functional change, so I've keyed this off a different (non-existant) debug #define. This is only enabled if you have PPC_EARLY_DEBUG enabled also. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 26 3月, 2008 1 次提交
-
-
由 Manish Ahuja 提交于
Initial patch for reserving memory in early boot, and freeing it later. If the previous boot had ended with a crash, the reserved memory would contain a copy of the crashed kernel data. Signed-off-by: NManish Ahuja <mahuja@us.ibm.com> Signed-off-by: NLinas Vepstas <linasvepstas@gmail.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 14 6月, 2007 1 次提交
-
-
由 Linas Vepstas 提交于
Add sysfs blinkenlights for EEH statistics. Shuffle the eeh_add_device_tree() call so that it appears in the correct sequence. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/Makefile | 2 arch/powerpc/platforms/pseries/eeh.c | 4 + arch/powerpc/platforms/pseries/eeh_cache.c | 2 arch/powerpc/platforms/pseries/eeh_sysfs.c | 84 +++++++++++++++++++++++++++++ arch/powerpc/platforms/pseries/pci_dlpar.c | 7 +- include/asm-powerpc/ppc-pci.h | 3 + 6 files changed, 98 insertions(+), 4 deletions(-) Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 08 5月, 2007 1 次提交
-
-
由 Michael Ellerman 提交于
Implement MSI support via RTAS (RTAS = run-time firmware on pSeries machines). For now we assumes that if the required RTAS tokens for MSI are present, then we want to use the RTAS MSI routines. When RTAS is managing MSIs for us, it will/may enable MSI on devices that support it by default. This is contrary to the Linux model where a device is in LSI mode until the driver requests MSIs. To remedy this we add a pci_irq_fixup call, which disables MSI if they've been assigned by firmware and the device also supports LSI. Devices that don't support LSI at all will be left as is, drivers are still expected to call pci_enable_msi() before using the device. At the moment there is no pci_irq_fixup on pSeries, so we can just set it unconditionally. If other platforms use the RTAS MSI backend they'll need to check that still holds. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 09 3月, 2007 1 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 17 2月, 2007 1 次提交
-
-
由 Manish Ahuja 提交于
During power outages, the UPS notifies the system for a shutdown. In the current setup, it isn't possible to poweron when power is restored. This patch fixes the issue by calling the right ibm,power-off-ups token during such events. It also adds a sysfs interface so userspace can specify whether or not to power on when power is restored. Signed-off-by: NManish Ahuja <ahuja@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 14 2月, 2007 1 次提交
-
-
由 Michael Ellerman 提交于
Move all the pseries kexec code into one file, platforms/pseries/kexec.c Provide helpers for setting up ppc_md.kexec_cpu_down, so that we don't have to have #ifdef CONFIG_KEXEC in setup.c Move the initialisation of the ppc_md kexec callbacks into an init routine. This is well and truly early enough to cause no change in behaviour, we can't kexec until userspace has given us a kernel to kexec into. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 08 12月, 2006 1 次提交
-
-
由 Michael Ellerman 提交于
As the first step in consolidating the pseries hotplug cpu code, create platforms/pseries/hotplug-cpu.c and move rtas_stop_self() into it. Do the rtas token initialisation in a new initcall, rather than rtas_initialize(). Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 13 9月, 2006 1 次提交
-
-
由 Mike Kravetz 提交于
Add instrumentation for hypervisor calls on pseries. Call statistics include number of calls, wall time and cpu cycles (if available) and are made available via debugfs. Instrumentation code is behind the HCALL_STATS config option and has no impact if not enabled. Signed-off-by: NMike Kravetz <kravetz@us.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 15 6月, 2006 1 次提交
-
-
由 Anton Blanchard 提交于
Micro-optimisation - add no-minimal-toc to some more arch/powerpc Makefiles. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 29 4月, 2006 1 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 10 2月, 2006 1 次提交
-
-
由 Michael Ellerman 提交于
Currently we have some stuff in firmware.h and kernel/firmware.c that is #ifdef CONFIG_PPC_PSERIES. Move it all into platforms/pseries. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 10 1月, 2006 2 次提交
-
-
由 Linas Vepstas 提交于
25-pci-address-cache.patch The core EEH file is rather large. This patch splits out a self-contained chunk of it into its own file. This is the chunk that performes the caching and lookup of pci devices based on the i/o addresses of thier resoures. This code is almos architecture-independent and could be used by any system that wanted to find a pci device based only on the i/o address used by the device. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org> (cherry picked from b0b291d59906d4a9a89ed9e34d9fd684c7188924 commit)
-
由 Linas Vepstas 提交于
Various PCI bus errors can be signaled by newer PCI controllers. The core error recovery routines are architecture dependent. This patch adds a recovery infrastructure for the PPC64 pSeries systems. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org> (cherry picked from e8ca11b460c4c9c7fa6b529be221529ebd770e38 commit)
-
- 09 1月, 2006 1 次提交
-
-
由 Linas Vepstas 提交于
23-rpaphp-migrate.patch (parts) This patch moves some pci device add & remove code from the PCI hotplug directory to the arch/powerpc/kernel directory, and cleans it up a tad. The primary reason for this is that the code performs some fairly generic operations that are shared with the PCI error recovery code (living in the arch/powerpc/kernel directory). Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-