When using uni-planar formats (like RGB), the scaling parameters are
stored in plane 0, not plane 1.

Fixes: fc04023f ("drm/vc4: Add support for YUV planes.")
Cc: stable@vger.kernel.org
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507121303.5610-1-boris.brezillon@bootlin.com

We need to reference it from the CRTC to make a decision for enabling
background color fill.
Signed-off-by: NStefan Schake <stschake@gmail.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1520556817-97297-4-git-send-email-stschake@gmail.com

Considering a single plane only, we have to enable background color
when the plane has an alpha format and could be blending from the
background or when it doesn't cover the entire screen.

Changes from v1:
 - Drop unrelated change
 - Move needs_bg_fill to plane state
Signed-off-by: NStefan Schake <stschake@gmail.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1520556817-97297-3-git-send-email-stschake@gmail.com

Alpha formats in DRM are assumed to be premultiplied, so we should be
setting the PREMULT bit in the plane configuration for HVS.

Changes from v1:
 - Use correct has_alpha
Signed-off-by: NStefan Schake <stschake@gmail.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1520556817-97297-2-git-send-email-stschake@gmail.com

The IN_FORMATS blob allows the kernel to advertise to userspace which
format/modifier combinations are supported, per plane. Use this to
advertise that we support both T_TILED and linear.

v2:
  - Only advertise T_TILED for RGB (Eric)
  - Actually turn on allow_fb_modifiers (Eric)
Signed-off-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/170828/

Now that the drm_format_info has a alpha field to tell if a format embeds
an alpha component in it, let's use it.

Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/38d4d0a085634a0b8308e819c846b9173d4d93df.1516617243.git-series.maxime.ripard@free-electrons.com

NV12 (YUV420 2 plane) and NV16 (YUV422 2 plane) were
supported, but NV21 and NV61 (same but with Cb and Cr
swapped) weren't. Add them.
Signed-off-by: NDave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1f50799525e3401551dff2b0b2828b9ab892f75f.1510841336.git.dave.stevenson@raspberrypi.org

The hardware has enums for altering the Cr and Cb order,
so use this instead of having a flag which swaps the
order the pointers are presented to the hardware
(that only worked for 3 plane formats anyway).

Explicitly sets .pixel_order in each case, rather than
relying on then default XYCBCR order being a value 0.
Signed-off-by: NDave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/563872b69c1e5df142cb15ebfca7f20056b8a64c.1510841336.git.dave.stevenson@raspberrypi.org

Filling out the list of supported formats based on those the
hardware can support.
Signed-off-by: NDave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/b551205d1c33fa49eef2c33ed2d60c5339b2f299.1510841336.git.dave.stevenson@raspberrypi.org

This ioctl will allow us to purge inactive userspace buffers when the
system is running out of contiguous memory.

For now, the purge logic is rather dumb in that it does not try to
release only the amount of BO needed to meet the last CMA alloc request
but instead purges all objects placed in the purgeable pool as soon as
we experience a CMA allocation failure.

Note that the in-kernel BO cache is always purged before the purgeable
cache because those objects are known to be unused while objects marked
as purgeable by a userspace application/library might have to be
restored when they are marked back as unpurgeable, which can be
expensive.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019125748.3152-1-boris.brezillon@free-electrons.com

The documentation said to use src_w here, and I didn't consider that
we actually needed to be using pitch somewhere in our setup.  Fixes
scanout on my DSI panel when X11 does initial setup with 1920x1080
HDMI and 800x480 DSI both at 0,0 of the same framebuffer.

v2: Add some comments requested by Boris
Signed-off-by: NEric Anholt <eric@anholt.net>
Fixes: 98830d91 ("drm/vc4: Add T-format scanout support.")
Link: https://patchwork.freedesktop.org/patch/msgid/20170927193209.11870-1-eric@anholt.netReviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.

This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.

v2: A minor addition from Daniel

v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)

v4: Minor comment adjustments (Liviu)

v5: Some new platforms added due to rebase

v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: NDaniel Stone <daniels@collabora.com>

This way drm_atomic_helper_wait_for_fences() will actually do
something.  The vc4_seqno_cb has been doing the fence waits on V3D
manually, so far.
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621185002.28563-1-eric@anholt.netAcked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

The T tiling format is what V3D uses for textures, with no raster
support at all until later revisions of the hardware (and always at a
large 3D performance penalty).  If we can't scan out V3D's format,
then we often need to do a relayout at some stage of the pipeline,
either right before texturing from the scanout buffer (common in X11
without a compositor) or between a tiled screen buffer right before
scanout (an option I've considered in trying to resolve this
inconsistency, but which means needing to use the dirty fb ioctl and
having some update policy).

T-format scanout lets us avoid either of those shadow copies, for a
massive, obvious performance improvement to X11 window dragging
without a compositor.  Unfortunately, enabling a compositor to work
around the discrepancy has turned out to be too costly in memory
consumption for the Raspbian distribution.

Because the HVS operates a scanline at a time, compositing from T does
increase the memory bandwidth cost of scanout.  On my 1920x1080@32bpp
display on a RPi3, we go from about 15% of system memory bandwidth
with linear to about 20% with tiled.  However, for X11 this still ends
up being a huge performance win in active usage.

This patch doesn't yet handle src_x/src_y offsetting within the tiled
buffer.  However, we fail to do so for untiled buffers already.
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608001336.12842-1-eric@anholt.netReviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.

While we are here, use <...> instead of "..." for include/linux/*.h
and include/sound/*.h headers too.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1495081793-9707-2-git-send-email-yamada.masahiro@socionext.com

Just rolling it out, no code change here.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-3-daniel.vetter@ffwll.ch

The pointer plane is always null on the error path at label 'fail'
hence the check if it is non-null is redundant. We can therefore
remove the check and the destruction of plane as well as the fail
error path and instead just return an -ENOMEM ERR_PTR.

Detected by CoverityScan, CID#1339532 ("Logically Dead Code")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316185418.32765-1-colin.king@canonical.com

Commonly used desktop environments such as xfce4 and gnome
on debian sid can flood the graphics drivers with cursor
updates.  Because the current implementation is waiting
for a vblank between cursor updates, this will cause the
display to hang for a long time since a typical refresh
rate is only 60Hz.

This is unnecessary and unexpected by user mode software,
so simply swap out the cursor frame buffer without waiting.
Signed-off-by: NMichael Zoran <mzoran@crowfest.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224015431.24583-1-mzoran@crowfest.net

When drm_crtc_init_with_planes() was orignally added
(in drm_crtc.c, e13161af
drm: Add drm_crtc_init_with_planes() (v2)), it only checked for "primary"
being non-null. If that was the case, it modified primary->possible_crtcs.

Then, when support for cursor planes was added
(fc1d3e44 drm: Allow drivers to register
cursor planes with crtc), the same behaviour was implemented for cursor
planes.

vc4_plane_init() since its inception has passed 0xff as "possible_crtcs"
parameter to drm_universal_plane_init(). With a change in drm_crtc.c
(7abc7d47 drm: don't override
possible_crtcs for primary/cursor planes) passing 0xff results in primary's
possible_crtcs set to 0xff (cursor was updated manually by vc4_crtc.c).
Consequently, it would be allowed to use the primary plane from CRTC 1 (for
example) on CRTC 0, which would result in the overlay and cursors being
buried.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1485941708-27892-1-git-send-email-andrzej.p@samsung.com
Fixes: 7abc7d47 ("drm: don't override possible_crtcs for primary/cursor planes")

The drm_mm range manager claimed to support top-down insertion, but it
was neither searching for the top-most hole that could fit the
allocation request nor fitting the request to the hole correctly.

In order to search the range efficiently, we create a secondary index
for the holes using either their size or their address. This index
allows us to find the smallest hole or the hole at the bottom or top of
the range efficiently, whilst keeping the hole stack to rapidly service
evictions.

v2: Search for holes both high and low. Rename flags to mode.
v3: Discover rb_entry_safe() and use it!
v4: Kerneldoc for enum drm_mm_insert_mode.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # vmwgfx
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> #etnaviv
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202210438.28702-1-chris@chris-wilson.co.uk

Replace uses of fb->pixel_format with fb->format->format.
Less duplicated information is a good thing.

Note that coccinelle failed to eliminate the
"/* fourcc format */" comment from drm_framebuffer.h, so I had
to do that part manually.

@@
struct drm_framebuffer *FB;
expression E;
@@
 drm_helper_mode_fill_fb_struct(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 i9xx_get_initial_plane_config(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 ironlake_get_initial_plane_config(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 skylake_get_initial_plane_config(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
@@
(
- a->pixel_format
+ a->format->format
|
- b.pixel_format
+ b.format->format
)

@@
struct drm_plane_state *a;
struct drm_plane_state b;
@@
(
- a->fb->pixel_format
+ a->fb->format->format
|
- b.fb->pixel_format
+ b.fb->format->format
)

@@
struct drm_crtc *CRTC;
@@
(
- CRTC->primary->fb->pixel_format
+ CRTC->primary->fb->format->format
|
- CRTC->primary->state->fb->pixel_format
+ CRTC->primary->state->fb->format->format
)

@@
struct drm_mode_set *set;
@@
(
- set->fb->pixel_format
+ set->fb->format->format
|
- set->crtc->primary->fb->pixel_format
+ set->crtc->primary->fb->format->format
)

@@
@@
 struct drm_framebuffer {
	 ...
-	 uint32_t pixel_format;
	 ...
 };

v2: Fix commit message (Laurent)
    Rebase due to earlier removal of many fb->pixel_format uses,
    including the 'fb->format = drm_format_info(fb->format->format);'
    snafu
v3: Adjusted the semantic patch a bit and regenerated due to code
    changes

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com

Replace drm_format_plane_cpp(fb->pixel_format) with just
fb->format->cpp[]. Avoids the expensive format info lookup.

@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
expression E;
@@
(
- drm_format_plane_cpp(a->pixel_format, E)
+ a->format->cpp[E]
|
- drm_format_plane_cpp(b.pixel_format, E)
+ b.format->cpp[E]
)

@@
struct drm_plane_state *a;
struct drm_plane_state b;
expression E;
@@
(
- drm_format_plane_cpp(a->fb->pixel_format, E)
+ a->fb->format->cpp[E]
|
- drm_format_plane_cpp(b.fb->pixel_format, E)
+ b.fb->format->cpp[E]
)

@@
struct drm_framebuffer *a;
identifier T;
expression E;
@@
  T = a->pixel_format
<+...
- drm_format_plane_cpp(T, E)
+ a->format->cpp[E]
...+>

@@
struct drm_framebuffer b;
identifier T;
expression E;
@@
  T = b.pixel_format
<+...
- drm_format_plane_cpp(T, E)
+ b.format->cpp[E]
...+>

v2: Rerun spatch due to code changes

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751057-18123-1-git-send-email-ville.syrjala@linux.intel.com

Replace drm_format_num_planes(fb->pixel_format) with just
fb->format->num_planes. Avoids the expensive format info lookup.

@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
@@
(
- drm_format_num_planes(a->pixel_format)
+ a->format->num_planes
|
- drm_format_num_planes(b.pixel_format)
+ b.format->num_planes
)

@@
struct drm_plane_state *a;
struct drm_plane_state b;
@@
(
- drm_format_num_planes(a->fb->pixel_format)
+ a->fb->format->num_planes
|
- drm_format_num_planes(b.fb->pixel_format)
+ b.fb->format->num_planes
)

@@
struct drm_framebuffer *a;
identifier T;
@@
  T = a->pixel_format
<+...
- drm_format_num_planes(T)
+ a->format->num_planes
...+>

@@
struct drm_framebuffer b;
identifier T;
@@
  T = b.pixel_format
<+...
- drm_format_num_planes(T)
+ b.format->num_planes
...+>

v2: Rerun spatch due to code changes

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751022-18015-1-git-send-email-ville.syrjala@linux.intel.com

The plane .prepare_fb() and .cleanup_fb() helpers are optional, there's
no need to implement empty stubs, and no need to explicitly set the
function pointers to NULL either.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[danvet: Resolved conflicts with Chris' patch.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

DRM_FORMAT_XBGR8888 and DRM_FORMAT_ABGR8888 are 2 of the native formats
used in Android, so enable them for VC4. There seems to be no logic behind
HVS_PIXEL_ORDER_xxxx naming, but HVS_PIXEL_ORDER_ARGB seems to work
correctly.
Signed-off-by: NRob Herring <robh@kernel.org>
Reviewed-by: NEric Anholt <eric@anholt.net>

... and use it in msm&vc4. Again just want to encapsulate
drm_atomic_state internals a bit.

The const threading is a bit awkward in vc4 since C sucks, but I still
think it's worth to enforce this. Eventually I want to make all the
obj->state pointers const too, but that's a lot more work ...

v2: Provide safe macro to wrap up the unsafe helper better, suggested
by Maarten.

v3: Fixup subject (Maarten) and spelling fixes (Eric Engestrom).

Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464877304-4213-1-git-send-email-daniel.vetter@ffwll.ch

It's unused, and really this helper should only look at the state
structure and nothing else.

v2: Fix commit message (Laurent).

v3: Rebase onto mtk driver merge.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Acked-by: NThierry Reding <thierry.reding@gmail.com>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-2-git-send-email-daniel.vetter@ffwll.ch

This supports 420 and 422 subsampling with 2 or 3 planes, tested with
modetest.  It doesn't set up chroma subsampling position (which it
appears KMS doesn't deal with yet).

The LBM memory is overallocated in many cases, but apparently the docs
aren't quite correct and I'll probably need to look at the hardware
source to really figure it out.
Signed-off-by: NEric Anholt <eric@anholt.net>

These were all touch-tested with modetest.
Signed-off-by: NEric Anholt <eric@anholt.net>

This implements a simple policy for choosing scaling modes
(trapezoidal for decimation, PPF for magnification), and a single PPF
filter (Mitchell/Netravali's recommendation).
Signed-off-by: NEric Anholt <eric@anholt.net>

This doesn't matter yet since we only allow 1:1 scaling, but the
comment clearly says we should be using the source size.
Signed-off-by: NEric Anholt <eric@anholt.net>

Previously, on every modeset we would allocate new display list
memory, recompute changed planes, write all of them to the new memory,
and pointed scanout at the new list (which will latch approximately at
the next line of scanout).  We let
drm_atomic_helper_wait_for_vblanks() decide whether we needed to wait
for a vblank after a modeset before cleaning up the old state and
letting the next modeset proceed, and on legacy cursor updates we
wouldn't wait.  If you moved the cursor fast enough, we could
potentially wrap around the display list memory area and overwrite the
existing display list while it was still being scanned out, resulting
in the HVS scanning out garbage or just halting.

Instead of making cursor updates wait for scanout to move to the new
display list area (which introduces significant cursor lag in X), we
just rewrite our current display list.
Signed-off-by: NEric Anholt <eric@anholt.net>

As we add actual scaling, this is going to get way more complicated.
Signed-off-by: NEric Anholt <eric@anholt.net>

This is the pointer to the HVS device's memory where we stored the
contents of *dlist.
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NEric Anholt <eric@anholt.net>

Done with coccinelle for the most part. It choked on
msm/mdp/mdp5/mdp5_plane.c like so:
"BAD:!!!!!  enum drm_plane_type type;"
No idea how to deal with that, so I just fixed that up
by hand.

Also it thinks '...' is part of the semantic patch, so I put an
'int DOTDOTDOT' placeholder in its place and got rid of it with
sed afterwards.

I didn't convert drm_plane_init() since passing the varargs through
would mean either cpp macros or va_list, and I figured we don't
care about these legacy functions enough to warrant the extra pain.

@@
typedef uint32_t;
identifier dev, plane, possible_crtcs, funcs, formats, format_count, type;
@@
 int drm_universal_plane_init(struct drm_device *dev,
                              struct drm_plane *plane,
                              unsigned long possible_crtcs,
                              const struct drm_plane_funcs *funcs,
                              const uint32_t *formats,
                              unsigned int format_count,
                              enum drm_plane_type type
+                             ,const char *name, int DOTDOTDOT
                              )
{ ... }

@@
identifier dev, plane, possible_crtcs, funcs, formats, format_count, type;
@@
 int drm_universal_plane_init(struct drm_device *dev,
                              struct drm_plane *plane,
                              unsigned long possible_crtcs,
                              const struct drm_plane_funcs *funcs,
                              const uint32_t *formats,
                              unsigned int format_count,
                              enum drm_plane_type type
+                             ,const char *name, int DOTDOTDOT
                              );

@@
expression E1, E2, E3, E4, E5, E6, E7;
@@
 drm_universal_plane_init(E1, E2, E3, E4, E5, E6, E7
+                         ,NULL
                          )

v2: Split crtc and plane changes apart
    Pass NUL for no-name instead of ""
    Leave drm_plane_init() alone
v3: Add ', or NULL...' to @name kernel doc (Jani)
    Annotate the function with __printf() attribute (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670795-2853-1-git-send-email-ville.syrjala@linux.intel.com

An async pageflip stores the modeset to be done and executes it once
the BOs are ready to be displayed.  This gets us about 3x performance
in full screen rendering with pageflipping.
Signed-off-by: NEric Anholt <eric@anholt.net>

We would scan out the memory around them if an upscale was attempted,
and would just scan out incorrectly for downscaling.
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

This is enough for fbcon and bringing up X using
xf86-video-modesetting.  It doesn't support the 3D accelerator or
power management yet.

v2: Drop FB_HELPER select thanks to Archit's patches.  Do manual init
    ordering instead of using the .load hook.  Structure registration
    more like tegra's, but still using the typical "component" code.
    Drop no-op hooks for atomic_begin and mode_fixup() now that
    they're optional.  Drop sentinel in Makefile.  Fix minor style
    nits I noticed on another reread.

v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead
    of having a fixed video mode.  Use exynos-style component driver
    matching instead of devicetree nodes to list the component driver
    instances.  Rename compatibility strings to say bcm2835, and
    distinguish pv0/1/2.  Clean up some h/vsync code, and add in
    interlaced mode setup.  Fix up probe/bind error paths.  Use
    bitops.h macros for vc4_regs.h

v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now
    that other bugs have been fixed, add timeouts to cpu_relax()
    loops, rename hpd-gpio to hpd-gpios.
Signed-off-by: NEric Anholt <eric@anholt.net>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>