James Chapman says:

====================
l2tp: fix API races discovered by syzbot

This patch series addresses several races with L2TP APIs discovered by
syzbot. There are no functional changes.

The set of patches 1-5 in combination fix the following syzbot reports.

19c09769f WARNING in debug_print_object
347bd5acd KASAN: use-after-free Read in inet_shutdown
6e6a5ec8d general protection fault in pppol2tp_connect
9df43faf0 KASAN: use-after-free Read in pppol2tp_connect

My first attempts to fix these issues were as net-next patches but
the series included other refactoring and cleanup work. I was asked to
separate out the bugfixes and redo for the net tree, which is what
these patches are.

The changes are:

 1. Fix inet_shutdown races when L2TP tunnels and sessions close. (patches 1-2)
 2. Fix races with tunnel and its socket. (patch 3)
 3. Fix race in pppol2tp_release with session and its socket. (patch 4)
 4. Fix tunnel lookup use-after-free. (patch 5)

All of the syzbot reproducers hit races in the tunnel and pppol2tp
session create and destroy paths. These tests create and destroy
pppol2tp tunnels and sessions rapidly using multiple threads,
provoking races in several tunnel/session create/destroy paths. The
key problem was that each tunnel/session socket could be destroyed
while its associated tunnel/session object still existed (patches 3,
4). Patch 5 addresses a problem with the way tunnels are removed from
the tunnel list. Patch 5 is tagged that it addresses all four syzbot
issues, though all 5 patches are needed.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

l2tp_tunnel_get walks the tunnel list to find a matching tunnel
instance and if a match is found, its refcount is increased before
returning the tunnel pointer. But when tunnel objects are destroyed,
they are on the tunnel list after their refcount hits zero. Fix this
by moving the code that removes the tunnel from the tunnel list from
the tunnel socket destructor into in the l2tp_tunnel_delete path,
before the tunnel refcount is decremented.

refcount_t: increment on 0; use-after-free.
WARNING: CPU: 3 PID: 13507 at lib/refcount.c:153 refcount_inc+0x47/0x50
Modules linked in:
CPU: 3 PID: 13507 Comm: syzbot_6e6a5ec8 Not tainted 4.16.0-rc2+ #36
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:refcount_inc+0x47/0x50
RSP: 0018:ffff8800136ffb20 EFLAGS: 00010286
RAX: dffffc0000000008 RBX: ffff880017068e68 RCX: ffffffff814d3333
RDX: 0000000000000000 RSI: ffff88001a59f6d8 RDI: ffff88001a59f6d8
RBP: ffff8800136ffb28 R08: 0000000000000000 R09: 0000000000000000
R10: ffff8800136ffab0 R11: 0000000000000000 R12: ffff880017068e50
R13: 0000000000000000 R14: ffff8800174da800 R15: 0000000000000004
FS:  00007f403ab1e700(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000205fafd2 CR3: 0000000016770000 CR4: 00000000000006e0
Call Trace:
 l2tp_tunnel_get+0x2dd/0x4e0
 pppol2tp_connect+0x428/0x13c0
 ? pppol2tp_session_create+0x170/0x170
 ? __might_fault+0x115/0x1d0
 ? lock_downgrade+0x860/0x860
 ? __might_fault+0xe5/0x1d0
 ? security_socket_connect+0x8e/0xc0
 SYSC_connect+0x1b6/0x310
 ? SYSC_bind+0x280/0x280
 ? __do_page_fault+0x5d1/0xca0
 ? up_read+0x1f/0x40
 ? __do_page_fault+0x3c8/0xca0
 SyS_connect+0x29/0x30
 ? SyS_accept+0x40/0x40
 do_syscall_64+0x1e0/0x730
 ? trace_hardirqs_off_thunk+0x1a/0x1c
 entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f403a42f259
RSP: 002b:00007f403ab1dee8 EFLAGS: 00000296 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00000000205fafe4 RCX: 00007f403a42f259
RDX: 000000000000002e RSI: 00000000205fafd2 RDI: 0000000000000004
RBP: 00007f403ab1df20 R08: 00007f403ab1e700 R09: 0000000000000000
R10: 00007f403ab1e700 R11: 0000000000000296 R12: 0000000000000000
R13: 00007ffc81906cbf R14: 0000000000000000 R15: 00007f403ab2b040
Code: 3b ff 5b 5d c3 e8 ca 5f 3b ff 80 3d 49 8e 66 04 00 75 ea e8 bc 5f 3b ff 48 c7 c7 60 69 64 85 c6 05 34 8e 66 04 01 e8 59 49 15 ff <0f> 0b eb ce 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49

Fixes: f8ccac0e ("l2tp: put tunnel socket release on a workqueue")
Reported-and-tested-by: syzbot+19c09769f14b48810113@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+347bd5acde002e353a36@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+6e6a5ec8de31a94cd015@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+9df43faf09bd400f2993@syzkaller.appspotmail.com
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pppol2tp_release uses call_rcu to put the final ref on its socket. But
the session object doesn't hold a ref on the session socket so may be
freed while the pppol2tp_put_sk RCU callback is scheduled. Fix this by
having the session hold a ref on its socket until the session is
destroyed. It is this ref that is dropped via call_rcu.

Sessions are also deleted via l2tp_tunnel_closeall. This must now also put
the final ref via call_rcu. So move the call_rcu call site into
pppol2tp_session_close so that this happens in both destroy paths. A
common destroy path should really be implemented, perhaps with
l2tp_tunnel_closeall calling l2tp_session_delete like pppol2tp_release
does, but this will be looked at later.

ODEBUG: activate active (active state 1) object type: rcu_head hint:           (null)
WARNING: CPU: 3 PID: 13407 at lib/debugobjects.c:291 debug_print_object+0x166/0x220
Modules linked in:
CPU: 3 PID: 13407 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #38
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:debug_print_object+0x166/0x220
RSP: 0018:ffff880013647a00 EFLAGS: 00010082
RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff814d3333
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88001a59f6d0
RBP: ffff880013647a40 R08: 0000000000000000 R09: 0000000000000001
R10: ffff8800136479a8 R11: 0000000000000000 R12: 0000000000000001
R13: ffffffff86161420 R14: ffffffff85648b60 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020e77000 CR3: 0000000006022000 CR4: 00000000000006e0
Call Trace:
 debug_object_activate+0x38b/0x530
 ? debug_object_assert_init+0x3b0/0x3b0
 ? __mutex_unlock_slowpath+0x85/0x8b0
 ? pppol2tp_session_destruct+0x110/0x110
 __call_rcu.constprop.66+0x39/0x890
 ? __call_rcu.constprop.66+0x39/0x890
 call_rcu_sched+0x17/0x20
 pppol2tp_release+0x2c7/0x440
 ? fcntl_setlk+0xca0/0xca0
 ? sock_alloc_file+0x340/0x340
 sock_release+0x92/0x1e0
 sock_close+0x1b/0x20
 __fput+0x296/0x6e0
 ____fput+0x1a/0x20
 task_work_run+0x127/0x1a0
 do_exit+0x7f9/0x2ce0
 ? SYSC_connect+0x212/0x310
 ? mm_update_next_owner+0x690/0x690
 ? up_read+0x1f/0x40
 ? __do_page_fault+0x3c8/0xca0
 do_group_exit+0x10d/0x330
 ? do_group_exit+0x330/0x330
 SyS_exit_group+0x22/0x30
 do_syscall_64+0x1e0/0x730
 ? trace_hardirqs_off_thunk+0x1a/0x1c
 entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f362e471259
RSP: 002b:00007ffe389abe08 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f362e471259
RDX: 00007f362e471259 RSI: 000000000000002e RDI: 0000000000000000
RBP: 00007ffe389abe30 R08: 0000000000000000 R09: 00007f362e944270
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60
R13: 00007ffe389abf50 R14: 0000000000000000 R15: 0000000000000000
Code: 8d 3c dd a0 8f 64 85 48 89 fa 48 c1 ea 03 80 3c 02 00 75 7b 48 8b 14 dd a0 8f 64 85 4c 89 f6 48 c7 c7 20 85 64 85 e
8 2a 55 14 ff <0f> 0b 83 05 ad 2a 68 04 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41

Fixes: ee40fb2e ("l2tp: protect sock pointer of struct pppol2tp_session with RCU")
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tunnel socket tunnel->sock (struct sock) is accessed when
preparing a new ppp session on a tunnel at pppol2tp_session_init. If
the socket is closed by a thread while another is creating a new
session, the threads race. In pppol2tp_connect, the tunnel object may
be created if the pppol2tp socket is associated with the special
session_id 0 and the tunnel socket is looked up using the provided
fd. When handling this, pppol2tp_connect cannot sock_hold the tunnel
socket to prevent it being destroyed during pppol2tp_connect since
this may itself may race with the socket being destroyed. Doing
sockfd_lookup in pppol2tp_connect isn't sufficient to prevent
tunnel->sock going away either because a given tunnel socket fd may be
reused between calls to pppol2tp_connect. Instead, have
l2tp_tunnel_create sock_hold the tunnel socket before it does
sockfd_put. This ensures that the tunnel's socket is always extant
while the tunnel object exists. Hold a ref on the socket until the
tunnel is destroyed and ensure that all tunnel destroy paths go
through a common function (l2tp_tunnel_delete) since this will do the
final sock_put to release the tunnel socket.

Since the tunnel's socket is now guaranteed to exist if the tunnel
exists, we no longer need to use sockfd_lookup via l2tp_sock_to_tunnel
to derive the tunnel from the socket since this is always
sk_user_data.

Also, sessions no longer sock_hold the tunnel socket since sessions
already hold a tunnel ref and the tunnel sock will not be freed until
the tunnel is freed. Removing these sock_holds in
l2tp_session_register avoids a possible sock leak in the
pppol2tp_connect error path if l2tp_session_register succeeds but
attaching a ppp channel fails. The pppol2tp_connect error path could
have been fixed instead and have the sock ref dropped when the session
is freed, but doing a sock_put of the tunnel socket when the session
is freed would require a new session_free callback. It is simpler to
just remove the sock_hold of the tunnel socket in
l2tp_session_register, now that the tunnel socket lifetime is
guaranteed.

Finally, some init code in l2tp_tunnel_create is reordered to ensure
that the new tunnel object's refcount is set and the tunnel socket ref
is taken before the tunnel socket destructor callbacks are set.

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 4360 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #34
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:pppol2tp_session_init+0x1d6/0x500
RSP: 0018:ffff88001377fb40 EFLAGS: 00010212
RAX: dffffc0000000000 RBX: ffff88001636a940 RCX: ffffffff84836c1d
RDX: 0000000000000045 RSI: 0000000055976744 RDI: 0000000000000228
RBP: ffff88001377fb60 R08: ffffffff84836bc8 R09: 0000000000000002
R10: ffff88001377fab8 R11: 0000000000000001 R12: 0000000000000000
R13: ffff88001636aac8 R14: ffff8800160f81c0 R15: 1ffff100026eff76
FS:  00007ffb3ea66700(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020e77000 CR3: 0000000016261000 CR4: 00000000000006f0
Call Trace:
 pppol2tp_connect+0xd18/0x13c0
 ? pppol2tp_session_create+0x170/0x170
 ? __might_fault+0x115/0x1d0
 ? lock_downgrade+0x860/0x860
 ? __might_fault+0xe5/0x1d0
 ? security_socket_connect+0x8e/0xc0
 SYSC_connect+0x1b6/0x310
 ? SYSC_bind+0x280/0x280
 ? __do_page_fault+0x5d1/0xca0
 ? up_read+0x1f/0x40
 ? __do_page_fault+0x3c8/0xca0
 SyS_connect+0x29/0x30
 ? SyS_accept+0x40/0x40
 do_syscall_64+0x1e0/0x730
 ? trace_hardirqs_off_thunk+0x1a/0x1c
 entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7ffb3e376259
RSP: 002b:00007ffeda4f6508 EFLAGS: 00000202 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000020e77012 RCX: 00007ffb3e376259
RDX: 000000000000002e RSI: 0000000020e77000 RDI: 0000000000000004
RBP: 00007ffeda4f6540 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60
R13: 00007ffeda4f6660 R14: 0000000000000000 R15: 0000000000000000
Code: 80 3d b0 ff 06 02 00 0f 84 07 02 00 00 e8 13 d6 db fc 49 8d bc 24 28 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 f
a 48 c1 ea 03 <80> 3c 02 00 0f 85 ed 02 00 00 4d 8b a4 24 28 02 00 00 e8 13 16

Fixes: 80d84ef3 ("l2tp: prevent l2tp_tunnel_delete racing with userspace close")
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously, if a ppp session was closed, we called inet_shutdown to mark
the socket as unconnected such that userspace would get errors and
then close the socket. This could race with userspace closing the
socket. Instead, leave userspace to close the socket in its own time
(our session will be detached anyway).

BUG: KASAN: use-after-free in inet_shutdown+0x5d/0x1c0
Read of size 4 at addr ffff880010ea3ac0 by task syzbot_347bd5ac/8296

CPU: 3 PID: 8296 Comm: syzbot_347bd5ac Not tainted 4.16.0-rc1+ #91
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Call Trace:
 dump_stack+0x101/0x157
 ? inet_shutdown+0x5d/0x1c0
 print_address_description+0x78/0x260
 ? inet_shutdown+0x5d/0x1c0
 kasan_report+0x240/0x360
 __asan_load4+0x78/0x80
 inet_shutdown+0x5d/0x1c0
 ? pppol2tp_show+0x80/0x80
 pppol2tp_session_close+0x68/0xb0
 l2tp_tunnel_closeall+0x199/0x210
 ? udp_v6_flush_pending_frames+0x90/0x90
 l2tp_udp_encap_destroy+0x6b/0xc0
 ? l2tp_tunnel_del_work+0x2e0/0x2e0
 udpv6_destroy_sock+0x8c/0x90
 sk_common_release+0x47/0x190
 udp_lib_close+0x15/0x20
 inet_release+0x85/0xd0
 inet6_release+0x43/0x60
 sock_release+0x53/0x100
 ? sock_alloc_file+0x260/0x260
 sock_close+0x1b/0x20
 __fput+0x19f/0x380
 ____fput+0x1a/0x20
 task_work_run+0xd2/0x110
 exit_to_usermode_loop+0x18d/0x190
 do_syscall_64+0x389/0x3b0
 entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x7fe240a45259
RSP: 002b:00007fe241132df8 EFLAGS: 00000297 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007fe240a45259
RDX: 00007fe240a45259 RSI: 0000000000000000 RDI: 00000000000000a5
RBP: 00007fe241132e20 R08: 00007fe241133700 R09: 0000000000000000
R10: 00007fe241133700 R11: 0000000000000297 R12: 0000000000000000
R13: 00007ffc49aff84f R14: 0000000000000000 R15: 00007fe241141040

Allocated by task 8331:
 save_stack+0x43/0xd0
 kasan_kmalloc+0xad/0xe0
 kasan_slab_alloc+0x12/0x20
 kmem_cache_alloc+0x144/0x3e0
 sock_alloc_inode+0x22/0x130
 alloc_inode+0x3d/0xf0
 new_inode_pseudo+0x1c/0x90
 sock_alloc+0x30/0x110
 __sock_create+0xaa/0x4c0
 SyS_socket+0xbe/0x130
 do_syscall_64+0x128/0x3b0
 entry_SYSCALL_64_after_hwframe+0x26/0x9b

Freed by task 8314:
 save_stack+0x43/0xd0
 __kasan_slab_free+0x11a/0x170
 kasan_slab_free+0xe/0x10
 kmem_cache_free+0x88/0x2b0
 sock_destroy_inode+0x49/0x50
 destroy_inode+0x77/0xb0
 evict+0x285/0x340
 iput+0x429/0x530
 dentry_unlink_inode+0x28c/0x2c0
 __dentry_kill+0x1e3/0x2f0
 dput.part.21+0x500/0x560
 dput+0x24/0x30
 __fput+0x2aa/0x380
 ____fput+0x1a/0x20
 task_work_run+0xd2/0x110
 exit_to_usermode_loop+0x18d/0x190
 do_syscall_64+0x389/0x3b0
 entry_SYSCALL_64_after_hwframe+0x26/0x9b

Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously, if a tunnel was closed, we called inet_shutdown to mark
the socket as unconnected such that userspace would get errors and
then close the socket. This could race with userspace closing the
socket. Instead, leave userspace to close the socket in its own time
(our tunnel will be detached anyway).

BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
IP: __lock_acquire+0x263/0x1630
PGD 0 P4D 0
Oops: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 2 PID: 42 Comm: kworker/u8:2 Not tainted 4.15.0-rc7+ #129
Workqueue: l2tp l2tp_tunnel_del_work
RIP: 0010:__lock_acquire+0x263/0x1630
RSP: 0018:ffff88001a37fc70 EFLAGS: 00010002
RAX: 0000000000000001 RBX: 0000000000000088 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88001a37fd18 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 00000000000076fd R12: 00000000000000a0
R13: ffff88001a3722c0 R14: 0000000000000001 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88001ad00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 000000001730b000 CR4: 00000000000006e0
Call Trace:
 ? __lock_acquire+0xc77/0x1630
 ? console_trylock+0x11/0xa0
 lock_acquire+0x117/0x230
 ? lock_sock_nested+0x3a/0xa0
 _raw_spin_lock_bh+0x3a/0x50
 ? lock_sock_nested+0x3a/0xa0
 lock_sock_nested+0x3a/0xa0
 inet_shutdown+0x33/0xf0
 l2tp_tunnel_del_work+0x60/0xef
 process_one_work+0x1ea/0x5f0
 ? process_one_work+0x162/0x5f0
 worker_thread+0x48/0x3e0
 ? trace_hardirqs_on+0xd/0x10
 kthread+0x108/0x140
 ? process_one_work+0x5f0/0x5f0
 ? kthread_stop+0x2a0/0x2a0
 ret_from_fork+0x24/0x30
Code: 00 41 81 ff ff 1f 00 00 0f 87 7a 13 00 00 45 85 f6 49 8b 85
68 08 00 00 0f 84 ae 03 00 00 c7 44 24 18 00 00 00 00 e9 f0 00 00 00 <49> 81 3c
24 80 93 3f 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f
RIP: __lock_acquire+0x263/0x1630 RSP: ffff88001a37fc70
CR2: 00000000000000a0

Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh.

 2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang.

 3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song.

 4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang.

 5) Fix potential deadlocks in netfilter getsockopt() code paths, from
    Paolo Abeni.

 6) Netfilter stackpointer size checks really are needed to validate
    user input, from Florian Westphal.

 7) Missing timer init in x_tables, from Paolo Abeni.

 8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg.

 9) When an ibmvnic device is brought down then back up again, it can be
    sent queue entries from a previous session, handle this properly
    instead of crashing. From Thomas Falcon.

10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman.

11) When we are dumping filters in cls_api, the output SKB is empty, and
    the filter we are dumping is too large for the space in the SKB, we
    should return -EMSGSIZE like other netlink dump operations do.
    Otherwise userland has no signal that is needs to increase the size
    of its read buffer. From Roman Kapl.

12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer.

13) Module refcount leak in netlink when a dump start fails, from Jason
    Donenfeld.

14) Handle sub-optimal GSO sizes better in TCP BBR congestion control,
    from Eric Dumazet.

15) Releasing bpf per-cpu arraymaps can take a long time, add a
    condtional scheduling point. From Eric Dumazet.

16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From
    Daniel Borkmann.

17) Fix page leak in gianfar driver, from Andy Spencer.

18) Missed clearing of estimator scratch buffer, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
  net_sched: gen_estimator: fix broken estimators based on percpu stats
  gianfar: simplify FCS handling and fix memory leak
  ipv6 sit: work around bogus gcc-8 -Wrestrict warning
  macvlan: fix use-after-free in macvlan_common_newlink()
  bpf, arm64: fix out of bounds access in tail call
  bpf, x64: implement retpoline for tail call
  rxrpc: Fix send in rxrpc_send_data_packet()
  net: aquantia: Fix error handling in aq_pci_probe()
  bpf: fix rcu lockdep warning for lpm_trie map_free callback
  bpf: add schedule points in percpu arrays management
  regulatory: add NUL to request alpha2
  ibmvnic: Fix early release of login buffer
  net/smc9194: Remove bogus CONFIG_MAC reference
  net: ipv4: Set addr_type in hash_keys for forwarded case
  tcp_bbr: better deal with suboptimal GSO
  smsc75xx: fix smsc75xx_set_features()
  netlink: put module reference if dump start fails
  selftests/bpf/test_maps: exit child process without error in ENOMEM case
  selftests/bpf: update gitignore with test_libbpf_open
  selftests/bpf: tcpbpf_kern: use in6_* macros from glibc
  ..

Merge branch 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull security subsystem fixes from James Morris:

 - keys fixes via David Howells:
      "A collection of fixes for Linux keyrings, mostly thanks to Eric
       Biggers:

        - Fix some PKCS#7 verification issues.

        - Fix handling of unsupported crypto in X.509.

        - Fix too-large allocation in big_key"

 - Seccomp updates via Kees Cook:
      "These are fixes for the get_metadata interface that landed during
       -rc1. While the new selftest is strictly not a bug fix, I think
       it's in the same spirit of avoiding bugs"

 - an IMA build fix from Randy Dunlap

* 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  integrity/security: fix digsig.c build error with header file
  KEYS: Use individual pages in big_key for crypto buffers
  X.509: fix NULL dereference when restricting key with unsupported_sig
  X.509: fix BUG_ON() when hash algorithm is unsupported
  PKCS#7: fix direct verification of SignerInfo signature
  PKCS#7: fix certificate blacklisting
  PKCS#7: fix certificate chain verification
  seccomp: add a selftest for get_metadata
  ptrace, seccomp: tweak get_metadata behavior slightly
  seccomp, ptrace: switch get_metadata types to arch independent

Pull arm64 fixes from Catalin Marinas:
 "arm64 and perf fixes:

   - build error when accessing MPIDR_HWID_BITMASK from .S

   - fix CTR_EL0 field definitions

   - remove/disable some kernel messages on user faults (unhandled
     signals, unimplemented syscalls)

   - fix kernel page fault in unwind_frame() with function graph tracing

   - fix perf sleeping while atomic errors when booting with ACPI"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fix unwind_frame() for filtered out fn for function graph tracing
  arm64: Enforce BBM for huge IO/VMAP mappings
  arm64: perf: correct PMUVer probing
  arm_pmu: acpi: request IRQs up-front
  arm_pmu: note IRQs and PMUs per-cpu
  arm_pmu: explicitly enable/disable SPIs at hotplug
  arm_pmu: acpi: check for mismatched PPIs
  arm_pmu: add armpmu_alloc_atomic()
  arm_pmu: fold platform helpers into platform code
  arm_pmu: kill arm_pmu_platdata
  ARM: ux500: remove PMU IRQ bouncer
  arm64: __show_regs: Only resolve kernel symbols when running at EL1
  arm64: Remove unimplemented syscall log message
  arm64: Disable unhandled signal log messages by default
  arm64: cpufeature: Fix CTR_EL0 field definitions
  arm64: uaccess: Formalise types for access_ok()
  arm64: Fix compilation error while accessing MPIDR_HWID_BITMASK from .S files

Pull MIPS fix from James Hogan:
 "A single MIPS fix for mismatching struct compat_flock, resulting in
  bus errors starting Firefox on Debian 8 since 4.13"

* tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
  MIPS: Drop spurious __unused in struct compat_flock

Pull printk fixlet from Petr Mladek:
 "People expect to see the real pointer value for %px.

  Let's substitute '(null)' only for the other %p? format modifiers that
  need to deference the pointer"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  vsprintf: avoid misleading "(null)" for %px

Pull i2c fixes from Wolfram Sang:
 "Two bugfixes, one v4.16 regression fix, and two documentation fixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: Consider SCL GPIO optional
  i2c: busses: i2c-sirf: Fix spelling: "formular" -> "formula".
  i2c: bcm2835: Set up the rising/falling edge delays
  i2c: i801: Add missing documentation entries for Braswell and Kaby Lake
  i2c: designware: must wait for enable

Pull SCSI fixes from James Bottomley:
 "These are mostly fixes for problems with merge window code.

  In addition we have one doc update (alua) and two dead code removals
  (aiclib and octogon) a spurious assignment removal (csiostor) and a
  performance improvement for storvsc involving better interrupt
  spreading and increasing the command per lun handling"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla4xxx: skip error recovery in case of register disconnect.
  scsi: aacraid: fix shutdown crash when init fails
  scsi: qedi: Cleanup local str variable
  scsi: qedi: Fix truncation of CHAP name and secret
  scsi: qla2xxx: Fix incorrect handle for abort IOCB
  scsi: qla2xxx: Fix double free bug after firmware timeout
  scsi: storvsc: Increase cmd_per_lun for higher speed devices
  scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els()
  scsi: scsi_dh: Document alua_rtpg_queue() arguments
  scsi: Remove Makefile entry for oktagon files
  scsi: aic7xxx: remove aiclib.c
  scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
  scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()
  scsi: sym53c8xx_2: iterator underflow in sym_getsync()
  scsi: bnx2fc: Fix check in SCSI completion handler for timed out request
  scsi: csiostor: remove redundant assignment to pointer 'ln'
  scsi: ufs: Enable quirk to ignore sending WRITE_SAME command
  scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info
  scsi: qla2xxx: Fix memory corruption during hba reset test
  scsi: mpt3sas: fix an out of bound write

Pull drm fixes from Dave Airlie:
 "A bunch of fixes for rc3:

  Exynos:
   - fixes for using monotonic timestamps
   - register definitions
   - removal of unused file

  ipu-v3L
   - minor changes
   - make some register arrays const+static
   - fix some leaks

  meson:
   - fix for vsync

  atomic:
   - fix for memory leak

  EDID parser:
   - add quirks for some more non-desktop devices
   - 6-bit panel fix.

  drm_mm:
   - fix a bug in the core drm mm hole handling

  cirrus:
   - fix lut loading regression

  Lastly there is a deadlock fix around runtime suspend for secondary
  GPUs.

  There was a deadlock between one thread trying to wait for a workqueue
  job to finish in the runtime suspend path, and the workqueue job it
  was waiting for in turn waiting for a runtime_get_sync to return.

  The fixes avoids it by not doing the runtime sync in the workqueue as
  then we always wait for all those tasks to complete before we runtime
  suspend"

* tag 'drm-fixes-for-v4.16-rc3' of git://people.freedesktop.org/~airlied/linux: (25 commits)
  drm/tve200: fix kernel-doc documentation comment include
  drm/edid: quirk Sony PlayStation VR headset as non-desktop
  drm/edid: quirk Windows Mixed Reality headsets as non-desktop
  drm/edid: quirk Oculus Rift headsets as non-desktop
  drm/meson: fix vsync buffer update
  drm: Handle unexpected holes in color-eviction
  drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1
  drm/exynos: remove exynos_drm_rotator.h
  drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions
  drm/exynos: fix comparison to bitshift when dealing with a mask
  drm/exynos: g2d: use monotonic timestamps
  drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA
  gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg
  gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image
  gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle
  gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle
  drm/amdgpu: Fix deadlock on runtime suspend
  drm/radeon: Fix deadlock on runtime suspend
  drm/nouveau: Fix deadlock on runtime suspend
  drm: Allow determining if current task is output poll worker
  ...

pfifo_fast got percpu stats lately, uncovering a bug I introduced last
year in linux-4.10.

I missed the fact that we have to clear our temporary storage
before calling __gnet_stats_copy_basic() in the case of percpu stats.

Without this fix, rate estimators (tc qd replace dev xxx root est 1sec
4sec pfifo_fast) are utterly broken.

Fixes: 1c0d32fd ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2018-02-22

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) two urgent fixes for bpf_tail_call logic for x64 and arm64 JITs, from Daniel.

2) cond_resched points in percpu array alloc/free paths, from Eric.

3) lockdep and other minor fixes, from Yonghong, Arnd, Anders, Li.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously, buffer descriptors containing only the frame check sequence
(FCS) were skipped and not added to the skb. However, the page reference
count was still incremented, leading to a memory leak.

Fixing this inside gfar_add_rx_frag() is difficult due to reserved
memory handling and page reuse. Instead, move the FCS handling to
gfar_process_frame() and trim off the FCS before passing the skb up the
networking stack.
Signed-off-by: NAndy Spencer <aspencer@spacex.com>
Signed-off-by: NJim Gruen <jgruen@spacex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

gcc-8 has a new warning that detects overlapping input and output arguments
in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(),
which is actually correct:

net/ipv6/sit.c: In function 'sit_init_net':
net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]

The problem here is that the logic detecting the memcpy() arguments finds them
to be the same, but the conditional that tests for the input and output of
ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant.

We know that netdev_priv(t->dev) is the same as t for a tunnel device,
and comparing "dev" directly here lets the compiler figure out as well
that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so
it no longer warns.

This code is old, so Cc stable to make sure that we don't get the warning
for older kernels built with new gcc.

Cc: Martin Sebor <msebor@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following use-after-free was reported by KASan when running
LTP macvtap01 test on 4.16-rc2:

[10642.528443] BUG: KASAN: use-after-free in
               macvlan_common_newlink+0x12ef/0x14a0 [macvlan]
[10642.626607] Read of size 8 at addr ffff880ba49f2100 by task ip/18450
...
[10642.963873] Call Trace:
[10642.994352]  dump_stack+0x5c/0x7c
[10643.035325]  print_address_description+0x75/0x290
[10643.092938]  kasan_report+0x28d/0x390
[10643.137971]  ? macvlan_common_newlink+0x12ef/0x14a0 [macvlan]
[10643.207963]  macvlan_common_newlink+0x12ef/0x14a0 [macvlan]
[10643.275978]  macvtap_newlink+0x171/0x260 [macvtap]
[10643.334532]  rtnl_newlink+0xd4f/0x1300
...
[10646.256176] Allocated by task 18450:
[10646.299964]  kasan_kmalloc+0xa6/0xd0
[10646.343746]  kmem_cache_alloc_trace+0xf1/0x210
[10646.397826]  macvlan_common_newlink+0x6de/0x14a0 [macvlan]
[10646.464386]  macvtap_newlink+0x171/0x260 [macvtap]
[10646.522728]  rtnl_newlink+0xd4f/0x1300
...
[10647.022028] Freed by task 18450:
[10647.061549]  __kasan_slab_free+0x138/0x180
[10647.111468]  kfree+0x9e/0x1c0
[10647.147869]  macvlan_port_destroy+0x3db/0x650 [macvlan]
[10647.211411]  rollback_registered_many+0x5b9/0xb10
[10647.268715]  rollback_registered+0xd9/0x190
[10647.319675]  register_netdevice+0x8eb/0xc70
[10647.370635]  macvlan_common_newlink+0xe58/0x14a0 [macvlan]
[10647.437195]  macvtap_newlink+0x171/0x260 [macvtap]

Commit d02fd6e7 ("macvlan: Fix one possible double free") handles
the case when register_netdevice() invokes ndo_uninit() on error and
as a result free the port. But 'macvlan_port_get_rtnl(dev))' check
(returns dev->rx_handler_data), which was added by this commit in order
to prevent double free, is not quite correct:

* for macvlan it always returns NULL because 'lowerdev' is the one that
  was used to register rx handler (port) in macvlan_port_create() as
  well as to unregister it in macvlan_port_destroy().
* for macvtap it always returns a valid pointer because macvtap registers
  its own rx handler before macvlan_common_newlink().

Fixes: d02fd6e7 ("macvlan: Fix one possible double free")
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

do_task_stat() calls get_wchan(), which further does unwind_frame().
unwind_frame() restores frame->pc to original value in case function
graph tracer has modified a return address (LR) in a stack frame to hook
a function return. However, if function graph tracer has hit a filtered
function, then we can't unwind it as ftrace_push_return_trace() has
biased the index(frame->graph) with a 'huge negative'
offset(-FTRACE_NOTRACE_DEPTH).

Moreover, arm64 stack walker defines index(frame->graph) as unsigned
int, which can not compare a -ve number.

Similar problem we can have with calling of walk_stackframe() from
save_stack_trace_tsk() or dump_backtrace().

This patch fixes unwind_frame() to test the index for -ve value and
restore index accordingly before we can restore frame->pc.

Reproducer:

cd /sys/kernel/debug/tracing/
echo schedule > set_graph_notrace
echo 1 > options/display-graph
echo wakeup > current_tracer
ps -ef | grep -i agent

Above commands result in:
Unable to handle kernel paging request at virtual address ffff801bd3d1e000
pgd = ffff8003cbe97c00
[ffff801bd3d1e000] *pgd=0000000000000000, *pud=0000000000000000
Internal error: Oops: 96000006 [#1] SMP
[...]
CPU: 5 PID: 11696 Comm: ps Not tainted 4.11.0+ #33
[...]
task: ffff8003c21ba000 task.stack: ffff8003cc6c0000
PC is at unwind_frame+0x12c/0x180
LR is at get_wchan+0xd4/0x134
pc : [<ffff00000808892c>] lr : [<ffff0000080860b8>] pstate: 60000145
sp : ffff8003cc6c3ab0
x29: ffff8003cc6c3ab0 x28: 0000000000000001
x27: 0000000000000026 x26: 0000000000000026
x25: 00000000000012d8 x24: 0000000000000000
x23: ffff8003c1c04000 x22: ffff000008c83000
x21: ffff8003c1c00000 x20: 000000000000000f
x19: ffff8003c1bc0000 x18: 0000fffffc593690
x17: 0000000000000000 x16: 0000000000000001
x15: 0000b855670e2b60 x14: 0003e97f22cf1d0f
x13: 0000000000000001 x12: 0000000000000000
x11: 00000000e8f4883e x10: 0000000154f47ec8
x9 : 0000000070f367c0 x8 : 0000000000000000
x7 : 00008003f7290000 x6 : 0000000000000018
x5 : 0000000000000000 x4 : ffff8003c1c03cb0
x3 : ffff8003c1c03ca0 x2 : 00000017ffe80000
x1 : ffff8003cc6c3af8 x0 : ffff8003d3e9e000

Process ps (pid: 11696, stack limit = 0xffff8003cc6c0000)
Stack: (0xffff8003cc6c3ab0 to 0xffff8003cc6c4000)
[...]
[<ffff00000808892c>] unwind_frame+0x12c/0x180
[<ffff000008305008>] do_task_stat+0x864/0x870
[<ffff000008305c44>] proc_tgid_stat+0x3c/0x48
[<ffff0000082fde0c>] proc_single_show+0x5c/0xb8
[<ffff0000082b27e0>] seq_read+0x160/0x414
[<ffff000008289e6c>] __vfs_read+0x58/0x164
[<ffff00000828b164>] vfs_read+0x88/0x144
[<ffff00000828c2e8>] SyS_read+0x60/0xc0
[<ffff0000080834a0>] __sys_trace_return+0x0/0x4

Fixes: 20380bb3 (arm64: ftrace: fix a stack tracer's output under function graph tracer)
Signed-off-by: NPratyush Anand <panand@redhat.com>
Signed-off-by: NJerome Marchand <jmarchan@redhat.com>
[catalin.marinas@arm.com: replace WARN_ON with WARN_ON_ONCE]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

security/integrity/digsig.c has build errors on some $ARCH due to a
missing header file, so add it.

  security/integrity/digsig.c:146:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration]
Reported-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: linux-integrity@vger.kernel.org
Link: http://kisskb.ellerman.id.au/kisskb/head/13396/Signed-off-by: NJames Morris <james.morris@microsoft.com>

Merge tag 'keys-fixes-20180222-2' of https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into fixes-v4.16-rc3

Keyrings fixes.

drm/imx: ipu-v3 fixups and grayscale support

- Make const interrupt register arrays static, reduces object size.
- Fix device_node leaks in PRE/PRG phandle lookup functions.
- Add 8-bit and 16-bit grayscale buffer support to ipu_cpmem_set_image,
- add 10-bit and 12-bit grayscale media bus support to ipu-csi,
  to be used by the imx-media driver.

* tag 'imx-drm-next-2018-02-22' of git://git.pengutronix.de/git/pza/linux:
  gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg
  gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image
  gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle
  gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle
  gpu: ipu-cpmem: add 8-bit grayscale support to ipu_cpmem_set_image
  gpu: ipu-v3: make const arrays int_reg static, shrinks object size

The MIPS %.its.S compiler command did not define __ASSEMBLY__, which meant
when compiler_types.h was added to kconfig.h, unexpected things appeared
(e.g. struct declarations) which should not have been present. As done in
the general %.S compiler command, __ASSEMBLY__ is now included here too.

The failure was:

    Error: arch/mips/boot/vmlinux.gz.its:201.1-2 syntax error
    FATAL ERROR: Unable to parse input tree
    /usr/bin/mkimage: Can't read arch/mips/boot/vmlinux.gz.itb.tmp: Invalid argument
    /usr/bin/mkimage Can't add hashes to FIT blob
Reported-by: Nkbuild test robot <lkp@intel.com>
Fixes: 28128c61 ("kconfig.h: Include compiler types to avoid missed struct attributes")
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull siginfo fix from Eric Biederman:
 "This fixes a build error that only shows up on blackfin"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  fs/signalfd: fix build error for BUS_MCEERR_AR

Pull crypto fix from Herbert Xu:
 "Fix an oops in the s5p-sss driver when used with ecb(aes)"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: s5p-sss - Fix kernel Oops in AES-ECB mode

I recently noticed a crash on arm64 when feeding a bogus index
into BPF tail call helper. The crash would not occur when the
interpreter is used, but only in case of JIT. Output looks as
follows:

  [  347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510
  [...]
  [  347.043065] [fffb850e96492510] address between user and kernel address ranges
  [  347.050205] Internal error: Oops: 96000004 [#1] SMP
  [...]
  [  347.190829] x13: 0000000000000000 x12: 0000000000000000
  [  347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10
  [  347.201427] x9 : 0000000000000000 x8 : 0000000000000000
  [  347.206726] x7 : 0000000000000000 x6 : 001c991738000000
  [  347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a
  [  347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500
  [  347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500
  [  347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61)
  [  347.235221] Call trace:
  [  347.237656]  0xffff000002f3a4fc
  [  347.240784]  bpf_test_run+0x78/0xf8
  [  347.244260]  bpf_prog_test_run_skb+0x148/0x230
  [  347.248694]  SyS_bpf+0x77c/0x1110
  [  347.251999]  el0_svc_naked+0x30/0x34
  [  347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b)
  [...]

In this case the index used in BPF r3 is the same as in r1
at the time of the call, meaning we fed a pointer as index;
here, it had the value 0xffff808fd7cf0500 which sits in x2.

While I found tail calls to be working in general (also for
hitting the error cases), I noticed the following in the code
emission:

  # bpftool p d j i 988
  [...]
  38:   ldr     w10, [x1,x10]
  3c:   cmp     w2, w10
  40:   b.ge    0x000000000000007c              <-- signed cmp
  44:   mov     x10, #0x20                      // #32
  48:   cmp     x26, x10
  4c:   b.gt    0x000000000000007c
  50:   add     x26, x26, #0x1
  54:   mov     x10, #0x110                     // #272
  58:   add     x10, x1, x10
  5c:   lsl     x11, x2, #3
  60:   ldr     x11, [x10,x11]                  <-- faulting insn (f86b694b)
  64:   cbz     x11, 0x000000000000007c
  [...]

Meaning, the tests passed because commit ddb55992 ("arm64:
bpf: implement bpf_tail_call() helper") was using signed compares
instead of unsigned which as a result had the test wrongly passing.

Change this but also the tail call count test both into unsigned
and cap the index as u32. Latter we did as well in 90caccdd
("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here,
too. Tested on HiSilicon Hi1616.

Result after patch:

  # bpftool p d j i 268
  [...]
  38:	ldr	w10, [x1,x10]
  3c:	add	w2, w2, #0x0
  40:	cmp	w2, w10
  44:	b.cs	0x0000000000000080
  48:	mov	x10, #0x20                  	// #32
  4c:	cmp	x26, x10
  50:	b.hi	0x0000000000000080
  54:	add	x26, x26, #0x1
  58:	mov	x10, #0x110                 	// #272
  5c:	add	x10, x1, x10
  60:	lsl	x11, x2, #3
  64:	ldr	x11, [x10,x11]
  68:	cbz	x11, 0x0000000000000080
  [...]

Fixes: ddb55992 ("arm64: bpf: implement bpf_tail_call() helper")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Implement a retpoline [0] for the BPF tail call JIT'ing that converts
the indirect jump via jmp %rax that is used to make the long jump into
another JITed BPF image. Since this is subject to speculative execution,
we need to control the transient instruction sequence here as well
when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop.
The latter aligns also with what gcc / clang emits (e.g. [1]).

JIT dump after patch:

  # bpftool p d x i 1
   0: (18) r2 = map[id:1]
   2: (b7) r3 = 0
   3: (85) call bpf_tail_call#12
   4: (b7) r0 = 2
   5: (95) exit

With CONFIG_RETPOLINE:

  # bpftool p d j i 1
  [...]
  33:	cmp    %edx,0x24(%rsi)
  36:	jbe    0x0000000000000072  |*
  38:	mov    0x24(%rbp),%eax
  3e:	cmp    $0x20,%eax
  41:	ja     0x0000000000000072  |
  43:	add    $0x1,%eax
  46:	mov    %eax,0x24(%rbp)
  4c:	mov    0x90(%rsi,%rdx,8),%rax
  54:	test   %rax,%rax
  57:	je     0x0000000000000072  |
  59:	mov    0x28(%rax),%rax
  5d:	add    $0x25,%rax
  61:	callq  0x000000000000006d  |+
  66:	pause                      |
  68:	lfence                     |
  6b:	jmp    0x0000000000000066  |
  6d:	mov    %rax,(%rsp)         |
  71:	retq                       |
  72:	mov    $0x2,%eax
  [...]

  * relative fall-through jumps in error case
  + retpoline for indirect jump

Without CONFIG_RETPOLINE:

  # bpftool p d j i 1
  [...]
  33:	cmp    %edx,0x24(%rsi)
  36:	jbe    0x0000000000000063  |*
  38:	mov    0x24(%rbp),%eax
  3e:	cmp    $0x20,%eax
  41:	ja     0x0000000000000063  |
  43:	add    $0x1,%eax
  46:	mov    %eax,0x24(%rbp)
  4c:	mov    0x90(%rsi,%rdx,8),%rax
  54:	test   %rax,%rax
  57:	je     0x0000000000000063  |
  59:	mov    0x28(%rax),%rax
  5d:	add    $0x25,%rax
  61:	jmpq   *%rax               |-
  63:	mov    $0x2,%eax
  [...]

  * relative fall-through jumps in error case
  - plain indirect jump as before

  [0] https://support.google.com/faqs/answer/7625886
  [1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2bSigned-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Fix build error in fs/signalfd.c by using same method that is used in
kernel/signal.c: separate blocks for different signal si_code values.

./fs/signalfd.c: error: 'BUS_MCEERR_AR' undeclared (first use in this function)
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

All the kernel_sendmsg() calls in rxrpc_send_data_packet() need to send
both parts of the iov[] buffer, but one of them does not.  Fix it so that
it does.

Without this, short IPv6 rxrpc DATA packets may be seen that have the rxrpc
header included, but no payload.

Fixes: 5a924b89 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
Reported-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should check "self->aq_hw" for allocation failure, and also we should
free it on the error paths.

Fixes: 23ee07ad ("net: aquantia: Cleanup pci functions module")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 9a3efb6b ("bpf: fix memory leak in lpm_trie map_free callback function")
fixed a memory leak and removed unnecessary locks in map_free callback function.
Unfortrunately, it introduced a lockdep warning. When lockdep checking is turned on,
running tools/testing/selftests/bpf/test_lpm_map will have:

  [   98.294321] =============================
  [   98.294807] WARNING: suspicious RCU usage
  [   98.295359] 4.16.0-rc2+ #193 Not tainted
  [   98.295907] -----------------------------
  [   98.296486] /home/yhs/work/bpf/kernel/bpf/lpm_trie.c:572 suspicious rcu_dereference_check() usage!
  [   98.297657]
  [   98.297657] other info that might help us debug this:
  [   98.297657]
  [   98.298663]
  [   98.298663] rcu_scheduler_active = 2, debug_locks = 1
  [   98.299536] 2 locks held by kworker/2:1/54:
  [   98.300152]  #0:  ((wq_completion)"events"){+.+.}, at: [<00000000196bc1f0>] process_one_work+0x157/0x5c0
  [   98.301381]  #1:  ((work_completion)(&map->work)){+.+.}, at: [<00000000196bc1f0>] process_one_work+0x157/0x5c0

Since actual trie tree removal happens only after no other
accesses to the tree are possible, replacing
  rcu_dereference_protected(*slot, lockdep_is_held(&trie->lock))
with
  rcu_dereference_protected(*slot, 1)
fixed the issue.

Fixes: 9a3efb6b ("bpf: fix memory leak in lpm_trie map_free callback function")
Reported-by: NEric Dumazet <edumazet@google.com>
Suggested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NYonghong Song <yhs@fb.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

syszbot managed to trigger RCU detected stalls in
bpf_array_free_percpu()

It takes time to allocate a huge percpu map, but even more time to free
it.

Since we run in process context, use cond_resched() to yield cpu if
needed.

Fixes: a10423b8 ("bpf: introduce BPF_MAP_TYPE_PERCPU_ARRAY map")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Merge tag 'mac80211-for-davem-2018-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Various fixes across the tree, the shortlog basically says it all:

  cfg80211: fix cfg80211_beacon_dup
  -> old bug in this code

  cfg80211: clear wep keys after disconnection
  -> certain ways of disconnecting left the keys

  mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4
  -> alignment issues with using 14 bytes

  mac80211: Do not disconnect on invalid operating class
  -> if the AP has a bogus operating class, let it be

  mac80211: Fix sending ADDBA response for an ongoing session
  -> don't send the same frame twice

  cfg80211: use only 1Mbps for basic rates in mesh
  -> interop issue with old versions of our code

  mac80211_hwsim: don't use WQ_MEM_RECLAIM
  -> it causes splats because it flushes work on a non-reclaim WQ

  regulatory: add NUL to request alpha2
  -> nla_put_string() issue from Kees

  mac80211: mesh: fix wrong mesh TTL offset calculation
  -> protocol issue

  mac80211: fix a possible leak of station stats
  -> error path might leak memory

  mac80211: fix calling sleeping function in atomic context
  -> percpu allocations need to be made with gfp flags
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull USB fixes from Greg KH:
 "Here are a number of USB fixes for 4.16-rc3

  Nothing major, but a number of different fixes all over the place in
  the USB stack for reported issues. Mostly gadget driver fixes,
  although the typical set of xhci bugfixes are there, along with some
  new quirks additions as well.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
  Revert "usb: musb: host: don't start next rx urb if current one failed"
  usb: musb: fix enumeration after resume
  usb: cdc_acm: prevent race at write to acm while system resumes
  Add delay-init quirk for Corsair K70 RGB keyboards
  usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
  usb: host: ehci: always enable interrupt for qtd completion at test mode
  usb: ldusb: add PIDs for new CASSY devices supported by this driver
  usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path
  usb: host: ehci: use correct device pointer for dma ops
  usbip: keep usbip_device sockfd state in sync with tcp_socket
  ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()
  USB: serial: option: Add support for Quectel EP06
  xhci: fix xhci debugfs errors in xhci_stop
  xhci: xhci debugfs device nodes weren't removed after device plugged out
  xhci: Fix xhci debugfs devices node disappearance after hibernation
  xhci: Fix NULL pointer in xhci debugfs
  xhci: Don't print a warning when setting link state for disabled ports
  xhci: workaround for AMD Promontory disabled ports wakeup
  usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume
  USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
  ...

Pull staging/IIO fixes from Greg KH:
 "Here are a small number of staging and iio driver fixes for 4.16-rc2.

  The IIO fixes are all for reported things, and the android driver
  fixes also resolve some reported problems. The remaining fsl-mc
  Kconfig change resolves a build testing error that Arnd reported.

  All of these have been in linux-next with no reported issues"

* tag 'staging-4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: buffer: check if a buffer has been set up when poll is called
  iio: adis_lib: Initialize trigger before requesting interrupt
  staging: android: ion: Zero CMA allocated memory
  staging: android: ashmem: Fix a race condition in pin ioctls
  staging: fsl-mc: fix build testing on x86
  iio: srf08: fix link error "devm_iio_triggered_buffer_setup" undefined
  staging: iio: ad5933: switch buffer mode to software
  iio: adc: stm32: fix stm32h7_adc_enable error handling
  staging: iio: adc: ad7192: fix external frequency setting
  iio: adc: aspeed: Fix error handling path

Pull char/misc driver fixes from Greg KH:
 "Here are a handful of char/misc driver fixes for 4.16-rc3.

  There are some binder driver fixes to resolve reported issues in
  stress testing the recent binder changes, some extcon driver fixes,
  and a few mei driver fixes and new device ids.

  All of these, with the exception of the mei driver id additions, have
  been in linux-next for a while. I forgot to push out the mei driver id
  additions to kernel.org until today, but all build tests pass with
  them enabled"

* tag 'char-misc-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mei: me: add cannon point device ids for 4th device
  mei: me: add cannon point device ids
  mei: set device client to the disconnected state upon suspend.
  ANDROID: binder: synchronize_rcu() when using POLLFREE.
  binder: replace "%p" with "%pK"
  ANDROID: binder: remove WARN() for redundant txn error
  binder: check for binder_thread allocation failure in binder_poll()
  extcon: int3496: process id-pin first so that we start with the right status
  Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()"
  extcon: axp288: Constify the axp288_pwr_up_down_info array

Similar to the ancient commit a5fe8e76 ("regulatory: add NUL
to alpha2"), add another byte to alpha2 in the request struct so
that when we use nla_put_string(), we don't overrun anything.

Fixes: 73d54c9e ("cfg80211: add regulatory netlink multicast group")
Reported-by: NKees Cook <keescook@google.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Pull rdma fixes from Doug Ledford:
 "Nothing in this is overly interesting, it's mostly your garden variety
  fixes.

  There was some work in this merge cycle around the new ioctl kABI, so
  there are fixes in here related to that (probably with more to come).

  We've also recently added new netlink support with a goal of moving
  the primary means of configuring the entire subsystem to netlink
  (eventually, this is a long term project), so there are fixes for
  that.

  Then a few bnxt_re driver fixes, and a few minor WARN_ON removals, and
  that covers this pull request. There are already a few more fixes on
  the list as of this morning, so there will certainly be more to come
  in this rc cycle ;-)

  Summary:

   - Lots of fixes for the new IOCTL interface and general uverbs flow.
     Found through testing and syzkaller

   - Bugfixes for the new resource track netlink reporting

   - Remove some unneeded WARN_ONs that were triggering for some users
     in IPoIB

   - Various fixes for the bnxt_re driver"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (27 commits)
  RDMA/uverbs: Fix kernel panic while using XRC_TGT QP type
  RDMA/bnxt_re: Avoid system hang during device un-reg
  RDMA/bnxt_re: Fix system crash during load/unload
  RDMA/bnxt_re: Synchronize destroy_qp with poll_cq
  RDMA/bnxt_re: Unpin SQ and RQ memory if QP create fails
  RDMA/bnxt_re: Disable atomic capability on bnxt_re adapters
  RDMA/restrack: don't use uaccess_kernel()
  RDMA/verbs: Check existence of function prior to accessing it
  RDMA/vmw_pvrdma: Fix usage of user response structures in ABI file
  RDMA/uverbs: Sanitize user entered port numbers prior to access it
  RDMA/uverbs: Fix circular locking dependency
  RDMA/uverbs: Fix bad unlock balance in ib_uverbs_close_xrcd
  RDMA/restrack: Increment CQ restrack object before committing
  RDMA/uverbs: Protect from command mask overflow
  IB/uverbs: Fix unbalanced unlock on error path for rdma_explicit_destroy
  IB/uverbs: Improve lockdep_check
  RDMA/uverbs: Protect from races between lookup and destroy of uobjects
  IB/uverbs: Hold the uobj write lock after allocate
  IB/uverbs: Fix possible oops with duplicate ioctl attributes
  IB/uverbs: Add ioctl support for 32bit processes
  ...

Merge tag 'riscv-for-linus-4.16-rc3-riscv_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V cleanups from Palmer Dabbelt:
 "This contains a handful of small cleanups.

  The only functional change is that IRQs are now enabled during
  exception handling, which was found when some warnings triggered with
  `CONFIG_DEBUG_ATOMIC_SLEEP=y`.

  The remaining fixes should have no functional change: `sbi_save()` has
  been renamed to `parse_dtb()` reflect what it actually does, and a
  handful of unused Kconfig entries have been removed"

* tag 'riscv-for-linus-4.16-rc3-riscv_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  Rename sbi_save to parse_dtb to improve code readability
  RISC-V: Enable IRQ during exception handling
  riscv: Remove ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select
  riscv: kconfig: Remove RISCV_IRQ_INTC select
  riscv: Remove ARCH_WANT_OPTIONAL_GPIOLIB select