Nearly all modern compilers support a stack-protector option, and nearly
all modern distributions enable the kernel stack-protector, so enabling
this by default in kernel builds would make sense.  However, Kconfig does
not have knowledge of available compiler features, so it isn't safe to
force on, as this would unconditionally break builds for the compilers or
architectures that don't have support.  Instead, this introduces a new
option, CONFIG_CC_STACKPROTECTOR_AUTO, which attempts to discover the best
possible stack-protector available, and will allow builds to proceed even
if the compiler doesn't support any stack-protector.

This option is made the default so that kernels built with modern
compilers will be protected-by-default against stack buffer overflows,
avoiding things like the recent BlueBorne attack.  Selection of a specific
stack-protector option remains available, including disabling it.

Additionally, tiny.config is adjusted to use CC_STACKPROTECTOR_NONE, since
that's the option with the least code size (and it used to be the default,
so we have to explicitly choose it there now).

Link: http://lkml.kernel.org/r/1510076320-69931-4-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Tested-by: NLaura Abbott <labbott@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Various portions of the kernel, especially per-architecture pieces,
need to know if the compiler is building with the stack protector.
This was done in the arch/Kconfig with 'select', but this doesn't
allow a way to do auto-detected compiler support. In preparation for
creating an on-if-available default, move the logic for the definition of
CONFIG_CC_STACKPROTECTOR into the Makefile.

Link: http://lkml.kernel.org/r/1510076320-69931-3-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Tested-by: NLaura Abbott <labbott@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In order to make stack-protector failures warn instead of unconditionally
breaking the build, this moves the compiler output sanity-check earlier,
and sets a flag for later testing.  Future patches can choose to warn or
fail, depending on the flag value.

Link: http://lkml.kernel.org/r/1510076320-69931-2-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Tested-by: NLaura Abbott <labbott@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A single character (line break) should be put into a sequence.  Thus use
the corresponding function "seq_putc".

This issue was detected by using the Coccinelle software.

Link: http://lkml.kernel.org/r/04fb69fe-d820-9141-820f-07e9a48f4635@users.sourceforge.netSigned-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rearrange args for smaller code.

lookup revolves around memcmp() which gets len 3rd arg, so propagate
length as 3rd arg.

readdir and lookup add additional arg to VFS ->readdir and ->lookup, so
better add it to the end.

Space savings on x86_64:

	add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-18 (-18)
	Function                                     old     new   delta
	proc_readdir                                  22      13      -9
	proc_lookup                                   18       9      -9

proc_match() is smaller if not inlined, I promise!

Link: http://lkml.kernel.org/r/20180104175958.GB5204@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

use_pde() is used at every open/read/write/...  of every random /proc
file.  Negative refcount happens only if PDE is being deleted by module
(read: never).  So it gets "likely".

unuse_pde() gets "unlikely" for the same reason.

close_pdeo() gets unlikely as the completion is filled only if there is a
race between PDE removal and close() (read: never ever).

It even saves code on x86_64 defconfig:

	add/remove: 0/0 grow/shrink: 1/2 up/down: 2/-20 (-18)
	Function                                     old     new   delta
	close_pdeo                                   183     185      +2
	proc_reg_get_unmapped_area                   119     111      -8
	proc_reg_poll                                 85      73     -12

Link: http://lkml.kernel.org/r/20180104175657.GA5204@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

/proc/self inode numbers, value of proc_inode_cache and st_nlink of
/proc/$TGID are fixed constants.

Link: http://lkml.kernel.org/r/20180103184707.GA31849@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Document what ->pde_unload_lock actually does.

Link: http://lkml.kernel.org/r/20180103185120.GB31849@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

struct proc_dir_entry became bit messy over years:

* move 16-bit ->mode_t before namelen to get rid of padding
* make ->in_use first field: it seems to be most used resulting in
  smaller code on x86_64 (defconfig):

	add/remove: 0/0 grow/shrink: 7/13 up/down: 24/-67 (-43)
	Function                                     old     new   delta
	proc_readdir_de                              451     455      +4
	proc_get_inode                               282     286      +4
	pde_put                                       65      69      +4
	remove_proc_subtree                          294     297      +3
	remove_proc_entry                            297     300      +3
	proc_register                                295     298      +3
	proc_notify_change                            94      97      +3
	unuse_pde                                     27      26      -1
	proc_reg_write                                89      85      -4
	proc_reg_unlocked_ioctl                       85      81      -4
	proc_reg_read                                 89      85      -4
	proc_reg_llseek                               87      83      -4
	proc_reg_get_unmapped_area                   123     119      -4
	proc_entry_rundown                           139     135      -4
	proc_reg_poll                                 91      85      -6
	proc_reg_mmap                                 79      73      -6
	proc_get_link                                 55      49      -6
	proc_reg_release                             108     101      -7
	proc_reg_open                                298     291      -7
	close_pdeo                                   228     218     -10

* move writeable fields together to a first cacheline (on x86_64),
  those include
	* ->in_use: reference count, taken every open/read/write/close etc
	* ->count: reference count, taken at readdir on every entry
	* ->pde_openers: tracks (nearly) every open, dirtied
	* ->pde_unload_lock: spinlock protecting ->pde_openers
	* ->proc_iops, ->proc_fops, ->data: writeonce fields,
	  used right together with previous group.

* other rarely written fields go into 1st/2nd and 2nd/3rd cacheline on
  32-bit and 64-bit respectively.

Additionally on 32-bit, ->subdir, ->subdir_node, ->namelen, ->name go
fully into 2nd cacheline, separated from writeable fields.  They are all
used during lookup.

Link: http://lkml.kernel.org/r/20171220215914.GA7877@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit df04abfd ("fs/proc/kcore.c: Add bounce buffer for ktext
data") added a bounce buffer to avoid hardened usercopy checks.  Copying
to the bounce buffer was implemented with a simple memcpy() assuming
that it is always valid to read from kernel memory iff the
kern_addr_valid() check passed.

A simple, but pointless, test case like "dd if=/proc/kcore of=/dev/null"
now can easily crash the kernel, since the former execption handling on
invalid kernel addresses now doesn't work anymore.

Also adding a kern_addr_valid() implementation wouldn't help here.  Most
architectures simply return 1 here, while a couple implemented a page
table walk to figure out if something is mapped at the address in
question.

With DEBUG_PAGEALLOC active mappings are established and removed all the
time, so that relying on the result of kern_addr_valid() before
executing the memcpy() also doesn't work.

Therefore simply use probe_kernel_read() to copy to the bounce buffer.
This also allows to simplify read_kcore().

At least on s390 this fixes the observed crashes and doesn't introduce
warnings that were removed with df04abfd ("fs/proc/kcore.c: Add
bounce buffer for ktext data"), even though the generic
probe_kernel_read() implementation uses uaccess functions.

While looking into this I'm also wondering if kern_addr_valid() could be
completely removed...(?)

Link: http://lkml.kernel.org/r/20171202132739.99971-1-heiko.carstens@de.ibm.com
Fixes: df04abfd ("fs/proc/kcore.c: Add bounce buffer for ktext data")
Fixes: f5509cc1 ("mm: Hardened usercopy")
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is 1:1 wrapper around seq_release().

Link: http://lkml.kernel.org/r/20171122171510.GA12161@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dentry name can be evaluated later, right before calling into VFS.

Also, spend less time under ->mmap_sem.

Link: http://lkml.kernel.org/r/20171110163034.GA2534@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Iterators aren't necessary as you can just grab the first entry and delete
it until no entries left.

Link: http://lkml.kernel.org/r/20171121191121.GA20757@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current code does:

	if (sscanf(dentry->d_name.name, "%lx-%lx", start, end) != 2)

However sscanf() is broken garbage.

It silently accepts whitespace between format specifiers
(did you know that?).

It silently accepts valid strings which result in integer overflow.

Do not use sscanf() for any even remotely reliable parsing code.

	OK
	# readlink '/proc/1/map_files/55a23af39000-55a23b05b000'
	/lib/systemd/systemd

	broken
	# readlink '/proc/1/map_files/               55a23af39000-55a23b05b000'
	/lib/systemd/systemd

	broken
	# readlink '/proc/1/map_files/55a23af39000-55a23b05b000    '
	/lib/systemd/systemd

	very broken
	# readlink '/proc/1/map_files/1000000000000000055a23af39000-55a23b05b000'
	/lib/systemd/systemd

Andrei said:

: This patch breaks criu.  It was a bug in criu.  And this bug is on a minor
: path, which works when memfd_create() isn't available.  It is a reason why
: I ask to not backport this patch to stable kernels.
:
: In CRIU this bug can be triggered, only if this patch will be backported
: to a kernel which version is lower than v3.16.

Link: http://lkml.kernel.org/r/20171120212706.GA14325@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

READ_ONCE and WRITE_ONCE are useless when there is only one read/write
is being made.

Link: http://lkml.kernel.org/r/20171120204033.GA9446@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PROC_NUMBUF is 13 which is enough for "negative int + \n + \0".

However PIDs and TGIDs are never negative and newline is not a concern,
so use just 10 per integer.

Link: http://lkml.kernel.org/r/20171120203005.GA27743@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Alexander Viro <viro@ftp.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Variable real_size is initialized with a value that is never read, it is
re-assigned a new value later on, hence the initialization is redundant
and can be removed.

Cleans up clang warning:

  lib/test_kasan.c:422:21: warning: Value stored to 'real_size' during its initialization is never read

Link: http://lkml.kernel.org/r/20180206144950.32457-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Right now the fact that KASAN uses a single shadow byte for 8 bytes of
memory is scattered all over the code.

This change defines KASAN_SHADOW_SCALE_SHIFT early in asm include files
and makes use of this constant where necessary.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/34937ca3b90736eaad91b568edf5684091f662e3.1515775666.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the new one.

Link: http://lkml.kernel.org/r/de3b7ffc30a55178913a7d3865216aa7accf6c40.1515775666.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Detect frees of pointers into middle of heap objects.

Link: http://lkml.kernel.org/r/cb569193190356beb018a03bb8d6fbae67e7adbc.1514378558.git.dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>a
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Both of these functions deal with freeing of slab objects.
However, kasan_poison_kfree() mishandles SLAB_TYPESAFE_BY_RCU
(must also not poison such objects) and does not detect double-frees.

Unify code between these functions.

This solves both of the problems and allows to add more common code
(e.g. detection of invalid frees).

Link: http://lkml.kernel.org/r/385493d863acf60408be219a021c3c8e27daa96f.1514378558.git.dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>a
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Detect frees of pointers into middle of mempool objects.

I did a one-off test, but it turned out to be very tricky, so I reverted
it.  First, mempool does not call kasan_poison_kfree() unless allocation
function fails.  I stubbed an allocation function to fail on second and
subsequent allocations.  But then mempool stopped to call
kasan_poison_kfree() at all, because it does it only when allocation
function is mempool_kmalloc().  We could support this special failing
test allocation function in mempool, but it also can't live with kasan
tests, because these are in a module.

Link: http://lkml.kernel.org/r/bf7a7d035d7a5ed62d2dd0e3d2e8a4fcdf456aa7.1514378558.git.dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>a
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__builtin_return_address(1) is unreliable without frame pointers.
With defconfig on kmalloc_pagealloc_invalid_free test I am getting:

BUG: KASAN: double-free or invalid-free in           (null)

Pass caller PC from callers explicitly.

Link: http://lkml.kernel.org/r/9b01bc2d237a4df74ff8472a3bf6b7635908de01.1514378558.git.dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>a
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "kasan: detect invalid frees".

KASAN detects double-frees, but does not detect invalid-frees (when a
pointer into a middle of heap object is passed to free).  We recently had
a very unpleasant case in crypto code which freed an inner object inside
of a heap allocation.  This left unnoticed during free, but totally
corrupted heap and later lead to a bunch of random crashes all over kernel
code.

Detect invalid frees.

This patch (of 5):

Detect frees of pointers into middle of large heap objects.

I dropped const from kasan_kfree_large() because it starts propagating
through a bunch of functions in kasan_report.c, slab/slub nearest_obj(),
all of their local variables, fixup_red_left(), etc.

Link: http://lkml.kernel.org/r/1b45b4fe1d20fc0de1329aab674c1dd973fee723.1514378558.git.dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>a
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As a code-size optimization, LLVM builds since r279383 may bulk-manipulate
the shadow region when (un)poisoning large memory blocks.  This requires
new callbacks that simply do an uninstrumented memset().

This fixes linking the Clang-built kernel when using KASAN.

[arnd@arndb.de: add declarations for internal functions]
  Link: http://lkml.kernel.org/r/20180105094112.2690475-1-arnd@arndb.de
[fengguang.wu@intel.com: __asan_set_shadow_00 can be static]
  Link: http://lkml.kernel.org/r/20171223125943.GA74341@lkp-ib03
[ghackmann@google.com: fix memset() parameters, and tweak commit message to describe new callbacks]
Link: http://lkml.kernel.org/r/20171204191735.132544-6-paullawrence@google.comSigned-off-by: NAlexander Potapenko <glider@google.com>
Signed-off-by: NGreg Hackmann <ghackmann@google.com>
Signed-off-by: NPaul Lawrence <paullawrence@google.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/20171204191735.132544-5-paullawrence@google.comSigned-off-by: NGreg Hackmann <ghackmann@google.com>
Signed-off-by: NPaul Lawrence <paullawrence@google.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

clang's AddressSanitizer implementation adds redzones on either side of
alloca()ed buffers.  These redzones are 32-byte aligned and at least 32
bytes long.

__asan_alloca_poison() is passed the size and address of the allocated
buffer, *excluding* the redzones on either side.  The left redzone will
always be to the immediate left of this buffer; but AddressSanitizer may
need to add padding between the end of the buffer and the right redzone.
If there are any 8-byte chunks inside this padding, we should poison
those too.

__asan_allocas_unpoison() is just passed the top and bottom of the dynamic
stack area, so unpoisoning is simpler.

Link: http://lkml.kernel.org/r/20171204191735.132544-4-paullawrence@google.comSigned-off-by: NGreg Hackmann <ghackmann@google.com>
Signed-off-by: NPaul Lawrence <paullawrence@google.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

LLVM doesn't understand GCC-style paramters ("--param asan-foo=bar"), thus
we currently we don't use inline/globals/stack instrumentation when
building the kernel with clang.

Add support for LLVM-style parameters ("-mllvm -asan-foo=bar") to enable
all KASAN features.

Link: http://lkml.kernel.org/r/20171204191735.132544-3-paullawrence@google.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: NPaul Lawrence <paullawrence@google.com>
Reviewed-by: NAlexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "kasan: support alloca, LLVM", v4.

This patch (of 5):

For now we can hard-code ASAN ABI level 5, since historical clang builds
can't build the kernel anyway.  We also need to emulate gcc's
__SANITIZE_ADDRESS__ flag, or memset() calls won't be instrumented.

Link: http://lkml.kernel.org/r/20171204191735.132544-2-paullawrence@google.comSigned-off-by: NGreg Hackmann <ghackmann@google.com>
Signed-off-by: NPaul Lawrence <paullawrence@google.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With KASAN enabled the kernel has two different memset() functions, one
with KASAN checks (memset) and one without (__memset).  KASAN uses some
macro tricks to use the proper version where required.  For example
memset() calls in mm/slub.c are without KASAN checks, since they operate
on poisoned slab object metadata.

The issue is that clang emits memset() calls even when there is no
memset() in the source code.  They get linked with improper memset()
implementation and the kernel fails to boot due to a huge amount of KASAN
reports during early boot stages.

The solution is to add -fno-builtin flag for files with KASAN_SANITIZE :=
n marker.

Link: http://lkml.kernel.org/r/8ffecfffe04088c52c42b92739c2bd8a0bcb3f5e.1516384594.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Acked-by: NNick Desaulniers <ndesaulniers@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull more xfs updates from Darrick Wong:
 "As promised, here's a (much smaller) second pull request for the
  second week of the merge cycle. This time around we have a couple
  patches shutting off unsupported fs configurations, and a couple of
  cleanups.

  Last, we turn off EXPERIMENTAL for the reverse mapping btree, since
  the primary downstream user of that information (online fsck) is now
  upstream and I haven't seen any major failures in a few kernel
  releases.

  Summary:

   - Print scrub build status in the xfs build info.

   - Explicitly call out the remaining two scenarios where we don't
     support reflink and never have.

   - Remove EXPERIMENTAL tag from reverse mapping btree!"

* tag 'xfs-4.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: remove experimental tag for reverse mapping
  xfs: don't allow reflink + realtime filesystems
  xfs: don't allow DAX on reflink filesystems
  xfs: add scrub to XFS_BUILD_OPTIONS
  xfs: fix u32 type usage in sb validation function

Pull overlayfs updates from Miklos Szeredi:
 "This work from Amir adds NFS export capability to overlayfs. NFS
  exporting an overlay filesystem is a challange because we want to keep
  track of any copy-up of a file or directory between encoding the file
  handle and decoding it.

  This is achieved by indexing copied up objects by lower layer file
  handle. The index is already used for hard links, this patchset
  extends the use to NFS file handle decoding"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (51 commits)
  ovl: check ERR_PTR() return value from ovl_encode_fh()
  ovl: fix regression in fsnotify of overlay merge dir
  ovl: wire up NFS export operations
  ovl: lookup indexed ancestor of lower dir
  ovl: lookup connected ancestor of dir in inode cache
  ovl: hash non-indexed dir by upper inode for NFS export
  ovl: decode pure lower dir file handles
  ovl: decode indexed dir file handles
  ovl: decode lower file handles of unlinked but open files
  ovl: decode indexed non-dir file handles
  ovl: decode lower non-dir file handles
  ovl: encode lower file handles
  ovl: copy up before encoding non-connectable dir file handle
  ovl: encode non-indexed upper file handles
  ovl: decode connected upper dir file handles
  ovl: decode pure upper file handles
  ovl: encode pure upper file handles
  ovl: document NFS export
  vfs: factor out helpers d_instantiate_anon() and d_alloc_anon()
  ovl: store 'has_upper' and 'opaque' as bit flags
  ...

Pull remoteproc updates from Bjorn Andersson:
 "This contains a few bug fixes and a cleanup up of the resource-table
  handling in the framework, which removes the need for drivers with no
  resource table to provide a fake one"

* tag 'rproc-v4.16' of git://github.com/andersson/remoteproc:
  remoteproc: Reset table_ptr on stop
  remoteproc: Drop dangling find_rsc_table dummies
  remoteproc: Move resource table load logic to find
  remoteproc: Don't handle empty resource table
  remoteproc: Merge rproc_ops and rproc_fw_ops
  remoteproc: Clone rproc_ops in rproc_alloc()
  remoteproc: Cache resource table size
  remoteproc: Remove depricated crash completion
  virtio_remoteproc: correct put_device virtio_device.dev

Pull rpmsg updates from Bjorn Andersson:
 "This fixes a few issues found in the SMD and GLINK drivers and
  corrects the handling of SMD channels that are found in an
  (previously) unexpected state"

* tag 'rpmsg-v4.16' of git://github.com/andersson/remoteproc:
  rpmsg: smd: Fix double unlock in __qcom_smd_send()
  rpmsg: glink: Fix missing mutex_init() in qcom_glink_alloc_channel()
  rpmsg: smd: Don't hold the tx lock during wait
  rpmsg: smd: Fail send on a closed channel
  rpmsg: smd: Wake up all waiters
  rpmsg: smd: Create device for all channels
  rpmsg: smd: Perform handshake during open
  rpmsg: glink: smem: Ensure ordering during tx
  drivers: rpmsg: remove duplicate includes
  remoteproc: qcom: Use PTR_ERR_OR_ZERO() in glink prob

Pull MMC host fixes from Ulf Hansson:

 - renesas_sdhi: Fix build error in case NO_DMA=y

 - sdhci: Implement a bounce buffer to address throughput regressions

* tag 'mmc-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: MMC_SDHI_{SYS,INTERNAL}_DMAC should depend on HAS_DMA
  mmc: sdhci: Implement an SDHCI-specific bounce buffer

Merge tag 'pwm/for-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The Meson PWM controller driver gains support for the AXG series and a
  minor bug is fixed for the STMPE driver.

  To round things off, the class is now set for PWM channels exported
  via sysfs which allows non-root access, provided that the system has
  been configured accordingly"

* tag 'pwm/for-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: meson: Add clock source configuration for Meson-AXG
  dt-bindings: pwm: Update bindings for the Meson-AXG
  pwm: stmpe: Fix wrong register offset for hwpwm=2 case
  pwm: Set class for exported channels in sysfs

The Mediatek ethernet driver fails to build after commit 23c35f48
("pinctrl: remove include file from <linux/device.h>") because it relies
on the pinctrl/consumer.h and pinctrl/devinfo.h being pulled in by the
device.h header implicitly.

Include these headers explicitly to avoid the build failure.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Meson GX MMC driver fails to build after commit 23c35f48
("pinctrl: remove include file from <linux/device.h>") because it relies
on the pinctrl/consumer.h being pulled in by the device.h header
implicitly.

Include the header explicitly to avoid the build failure.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Rockchip LVDS driver fails to build after commit 23c35f48
("pinctrl: remove include file from <linux/device.h>") because it relies
on the pinctrl/consumer.h and pinctrl/devinfo.h being pulled in by the
device.h header implicitly.

Include these headers explicitly to avoid the build failure.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes: 23c35f48 ("pinctrl: remove include file from <linux/device.h>")
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>