- 16 1月, 2010 1 次提交
-
-
由 Dave Chinner 提交于
Convert the remaining direct lookups of the per ag structures to use get/put accesses. Ensure that the loops across AGs and prior users of the interface balance gets and puts correctly. Signed-off-by: NDave Chinner <david@fromorbit.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 15 12月, 2009 3 次提交
-
-
由 Christoph Hellwig 提交于
Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Christoph Hellwig 提交于
Change the xfs_iext_insert / xfs_iext_remove prototypes to pass more information which will allow pushing the trace points from the callers into those functions. This includes folding the whichfork information into the state variable to minimize the addition stack footprint. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Christoph Hellwig 提交于
Cleanup the extent state macros in the bmap code to use one common set of flags that we can pass to the tracing code later and remove a lot of the macro obsfucation. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 01 9月, 2009 1 次提交
-
-
由 Eric Sandeen 提交于
A lot more functions could be made static, but they need forward declarations; this does some easy ones, and also found a few unused functions in the process. Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
- 12 8月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
xfs_getbmap allocates memory with i_lock held, but i_lock is taken in reclaim context so all allocations under it must avoid recursions into the filesystem. Reported by the new reclaim context tracing in lockdep. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NFelix Blyakher <felixb@sgi.com> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
- 11 8月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
xfs_getbmap allocates memory with i_lock held, but i_lock is taken in reclaim context so all allocations under it must avoid recursions into the filesystem. Reported by the new reclaim context tracing in lockdep. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NFelix Blyakher <felixb@sgi.com> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
- 02 7月, 2009 1 次提交
-
-
由 Eric Sandeen 提交于
A lot more functions could be made static, but they need forward declarations; this does some easy ones, and also found a few unused functions in the process. Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
- 12 6月, 2009 1 次提交
-
-
由 Felix Blyakher 提交于
Regression from commit 28e21170. Need to free temporary buffer allocated in xfs_getbmap(). Signed-off-by: NFelix Blyakher <felixb@sgi.com> Signed-off-by: NHedi Berriche <hedi@sgi.com> Reported-by: NJustin Piszcz <jpiszcz@lucidpixels.com> Reviewed-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 08 6月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net>
-
- 30 4月, 2009 3 次提交
-
-
由 Christoph Hellwig 提交于
xfs_getbmap (or rather the formatters called by it) copy out the getbmap structures under the ilock, which can deadlock against mmap. This has been reported via bugzilla a while ago (#717) and has recently also shown up via lockdep. So allocate a temporary buffer to format the kernel getbmap structures into and then copy them out after dropping the locks. A little problem with this is that we limit the number of extents we can copy out by the maximum allocation size, but I see no real way around that. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NFelix Blyakher <felixb@sgi.com> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
由 Christoph Hellwig 提交于
- reshuffle various conditionals for data vs attr fork to make the code more readable - do fine-grainded goto-based error handling - exit early from conditionals instead of keeping a long else branch around - allow kmem_alloc to fail Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NFelix Blyakher <felixb@sgi.com> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
由 Christoph Hellwig 提交于
xfs_getbmap (or rather the formatters called by it) copy out the getbmap structures under the ilock, which can deadlock against mmap. This has been reported via bugzilla a while ago (#717) and has recently also shown up via lockdep. So allocate a temporary buffer to format the kernel getbmap structures into and then copy them out after dropping the locks. A little problem with this is that we limit the number of extents we can copy out by the maximum allocation size, but I see no real way around that. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NFelix Blyakher <felixb@sgi.com> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
- 29 4月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
- reshuffle various conditionals for data vs attr fork to make the code more readable - do fine-grainded goto-based error handling - exit early from conditionals instead of keeping a long else branch around - allow kmem_alloc to fail Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NFelix Blyakher <felixb@sgi.com> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
- 30 3月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
With the upcoming v3 inodes the default attroffset needs to be calculated for each specific inode, so we can't cache it in the superblock anymore. Also replace the assert for wrong inode sizes with a proper error check also included in non-debug builds. Note that the ENOSYS return for that might seem odd, but that error is returned by xfs_mount_validate_sb for all theoretically valid but not supported filesystem geometries. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJosef 'Jeff' Sipek <jeffpc@josefsipek.net>
-
- 29 3月, 2009 1 次提交
-
-
由 Malcolm Parsons 提交于
Signed-off-by: NMalcolm Parsons <malcolm.parsons@gmail.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 16 3月, 2009 1 次提交
-
-
由 Dave Chinner 提交于
Signed-off-by: NDave Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 07 3月, 2009 1 次提交
-
-
由 Hannes Eder 提交于
Instead of the keyword 'static' the macro 'STATIC' is used, so the symbols are still global with CONFIG_XFS_DEBUG. Fix this sparse warnings: fs/xfs/linux-2.6/xfs_super.c:638:1: warning: symbol 'xfs_blkdev_get' was not declared. Should it be static? fs/xfs/linux-2.6/xfs_super.c:655:1: warning: symbol 'xfs_blkdev_put' was not declared. Should it be static? fs/xfs/linux-2.6/xfs_super.c:876:1: warning: symbol 'xfsaild' was not declared. Should it be static? fs/xfs/xfs_bmap.c:6208:1: warning: symbol 'xfs_check_block' was not declared. Should it be static? fs/xfs/xfs_dir2_leaf.c:553:1: warning: symbol 'xfs_dir2_leaf_check' was not declared. Should it be static? Signed-off-by: NHannes Eder <hannes@hanneseder.net> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
- 19 1月, 2009 1 次提交
-
-
由 Eric Sandeen 提交于
Remove the last of the macros-defined-to-static-functions. Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 16 1月, 2009 1 次提交
-
-
由 Eric Sandeen 提交于
Remove the last of the macros-defined-to-static-functions. Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 01 12月, 2008 2 次提交
-
-
由 Eric Sandeen 提交于
This adds a new output flag, BMV_OF_LAST to indicate if we've hit the last extent in the inode. This potentially saves an extra call from userspace to see when the whole mapping is done. It also adds BMV_IF_DELALLOC and BMV_OF_DELALLOC to request, and indicate, delayed-allocation extents. In this case bmv_block is set to -2 (-1 was already taken for HOLESTARTBLOCK; unfortunately these are the reverse of the in-kernel constants.) These new flags facilitate addition of the new fiemap interface. Rather than adding sh_delalloc, remove sh_unwritten & just test the flags directly. Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNiv Sardi <xaiki@sgi.com>
-
由 Eric Sandeen 提交于
Preliminary work to hook up fiemap, this allows us to pass in an arbitrary formatter to copy extent data back to userspace. The formatter takes info for 1 extent, a pointer to the user "thing*" and a pointer to a "filled" variable to indicate whether a userspace buffer did get filled in (for fiemap, hole "extents" are skipped). I'm just using the getbmapx struct as a "common denominator" because as far as I can see, it holds all info that any formatters will care about. ("*thing" because fiemap doesn't pass the user pointer around, but rather has a pointer to a fiemap info structure, and helpers associated with it) Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNiv Sardi <xaiki@sgi.com>
-
- 17 11月, 2008 1 次提交
-
-
由 Dave Chinner 提交于
When an I/O error occurs during an intermediate commit on a rolling transaction, xfs_trans_commit() will free the transaction structure and the related ticket. However, the duplicate transaction that gets used as the transaction continues still contains a pointer to the ticket. Hence when the duplicate transaction is cancelled and freed, we free the ticket a second time. Add reference counting to the ticket so that we hold an extra reference to the ticket over the transaction commit. We drop the extra reference once we have checked that the transaction commit did not return an error, thus avoiding a double free on commit error. Credit to Nick Piggin for tripping over the problem. SGI-PV: 989741 Signed-off-by: NDave Chinner <david@fromorbit.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 30 10月, 2008 14 次提交
-
-
由 Christoph Hellwig 提交于
Move the XFS_BMAP_SANITY_CHECK macro out of line and make it a properly typed function. Also pass the xfs_buf for the btree block instead of just the btree block header, as we will need some additional information for it to implement CRC checking of btree blocks. SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32301a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
structures. Always use the generic xfs_btree_block type instead of the short / long structures. Add XFS_BTREE_SBLOCK_LEN / XFS_BTREE_LBLOCK_LEN defines for the length of a short / long form block. The rationale for this is that we will grow more btree block header variants to support CRCs and other RAS information, and always accessing them through the same datatype with unions for the short / long form pointers makes implementing this much easier. SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32300a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
Replace the generic record / key / ptr addressing macros that use cpp token pasting with simpler macros that do the job for just one given btree type. The new macros lose the cur argument and thus can be used outside the core btree code, but also gain an xfs_mount * argument to allow for checking the CRC flag in the near future. Note that many of these macros aren't actually used in the kernel code, but only in userspace (mostly in xfs_repair). SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32295a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
Clean up the way the maximum and minimum records for the btree blocks are calculated. For the alloc and inobt btrees all the values are pre-calculated in xfs_mount_common, and we switch the current loop around the ugly generic macros that use cpp token pasting to generate type names to two small helpers in normal C code. For the bmbt and bmdr trees these helpers also exist, but can be called during runtime, too. Here we also kill various macros dealing with them and inline the logic into the get_minrecs / get_maxrecs / get_dmaxrecs methods in xfs_bmap_btree.c. Note that all these new helpers take an xfs_mount * argument which will be needed to determine the size of a btree block once we add support for extended btree blocks with CRCs and other RAS information. SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32292a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
Add methods to check whether two keys/records are in the righ order. This replaces the xfs_btree_check_key and xfs_btree_check_rec methods. For the callers from xfs_bmap.c just opencode the bmbt-specific asserts. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32208a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
These are equivalent to the xfs_btree_* versions, and the only remaining caller can be switched to the generic one after they are exported. Also remove some now dead infrastructure in xfs_bmap_btree.c. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32207a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
Make the btree delete code generic. Based on a patch from David Chinner with lots of changes to follow the original btree implementations more closely. While this loses some of the generic helper routines for inserting/moving/removing records it also solves some of the one off bugs in the original code and makes it easier to verify. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32205a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
Make the btree insert code generic. Based on a patch from David Chinner with lots of changes to follow the original btree implementations more closely. While this loses some of the generic helper routines for inserting/moving/removing records it also solves some of the one off bugs in the original code and makes it easier to verify. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32202a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
xfs_bmbt_newroot is a mostly generic implementation of moving from an inode root to a real block based root. So move it to xfs_btree.c where it can use all the nice infrastructure there and make it pointer size agnostic The new name for it is xfs_btree_new_iroot, following the old naming but making it clear we're dealing with the root in inode case here, and to avoid confusion with xfs_btree_new_root which is used for the not inode rooted case. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32201a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
From: Dave Chinner <dgc@sgi.com> The most complicated part here is the lastrec tracking for the alloc btree. Most logic is in the update_lastrec method which has to do some hopefully good enough dirty magic to maintain it. [hch: split out from bigger patch and a rework of the lastrec logic] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32194a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
From: Dave Chinner <dgc@sgi.com> [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32192a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
From: Dave Chinner <dgc@sgi.com> [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32191a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
From: Dave Chinner <dgc@sgi.com> Because this is the first major generic btree routine this patch includes some infrastrucure, first a few routines to deal with a btree block that can be either in short or long form, second xfs_btree_read_buf_block, which is the new central routine to read a btree block given a cursor, and third the new xfs_btree_ptr_addr routine to calculate the address for a given btree pointer record. [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32190a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
xfs_btree_init_cursor contains close to little shared code for the different btrees and will get even more non-common code in the future. Split it up into one routine per btree type. Because xfs_btree_dup_cursor needs to call the init routine for a generic btree cursor add a new btree operation vector that contains a dup_cursor method that initializes a new cursor based on an existing one. The btree operations vector is based on an idea and code from Dave Chinner and will grow more entries later during this series. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32176a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NBill O'Donnell <billodo@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
- 13 8月, 2008 3 次提交
-
-
由 Ruben Porras 提交于
xfs_bmap_count_leaves and xfs_bmap_disk_count_leaves always return always 0, make them void. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31844a Signed-off-by: NRuben Porras <ruben.porras@linworks.de> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
Use IHOLD(ip) instead of VN_HOLD(VFS_I(ip)). SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31765a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Eric Sandeen 提交于
SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31758a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-