- 16 5月, 2018 2 次提交
-
-
由 Karsten Graul 提交于
Register new rmb buffers with the remote peer by exchanging a confirm_rkey llc message. Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
If TCP_NODELAY is set or TCP_CORK is reset, setsockopt triggers the tx worker. This does not make sense, if the SMC socket switched to the TCP fallback when the connection is created. This patch adds the additional check for the fallback case. Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 5月, 2018 5 次提交
-
-
由 Stefan Raspl 提交于
Provide an implementation for splice() when we are using SMC. See smc_splice_read() for further details. Signed-off-by: NStefan Raspl <raspl@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>< Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Raspl 提交于
Turn smc_rx_wait_data into a generic function that can be used at various instances to wait on traffic to complete with varying criteria. Signed-off-by: NStefan Raspl <raspl@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>< Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Raspl 提交于
The sendpage() call grabs the sock lock before calling the default implementation - which tries to grab it once again. Signed-off-by: NStefan Raspl <raspl@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>< Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
When smc_wr_reg_send() fails then tag (regerr) the affected buffer and free it in smc_buf_unuse(). Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
Consolidate the call to smc_wr_reg_send() in a new function. No functional changes. Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 5月, 2018 3 次提交
-
-
由 Ursula Braun 提交于
SIOCINQ returns the amount of unread data in the RMB. SIOCOUTQ returns the amount of unsent or unacked sent data in the send buffer. SIOCOUTQNSD returns the amount of data prepared for sending, but not yet sent. Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
Add periodic LLC testlink support to ensure the link is still active. The interval time is initialized using the value of sysctl_tcp_keepalive_time. Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
The smc_poll code tries to finish connect() if the socket is in state SMC_INIT and polling of the internal CLC-socket returns with EPOLLOUT. This makes sense for a select/poll call following a connect call, but not without preceding connect(). With this patch smc_poll starts connect logic only, if the CLC-socket is no longer in its initial state TCP_CLOSE. In addition, a poll error on the internal CLC-socket is always propagated to the SMC socket. With this patch the code path mentioned by syzbot https://syzkaller.appspot.com/bug?extid=03faa2dc16b8b64be396 is no longer possible. Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com> Reported-by: syzbot+03faa2dc16b8b64be396@syzkaller.appspotmail.com Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 4月, 2018 3 次提交
-
-
由 Ursula Braun 提交于
If sockopt TCP_DEFER_ACCEPT is set, the accept is delayed till data is available. Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Setting sockopt TCP_NODELAY or resetting sockopt TCP_CORK triggers data transfer. For a corked SMC socket RDMA writes are deferred, if there is still sufficient send buffer space available. Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Several TCP sockopts do not work for SMC. One example are the TCP_FASTOPEN sockopts, since SMC-connection setup is based on the TCP three-way-handshake. If the SMC socket is still in state SMC_INIT, such sockopts trigger fallback to TCP. Otherwise an error is returned. Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2018 1 次提交
-
-
由 Ursula Braun 提交于
The internal CLC socket should exist till the SMC-socket is released. Function tcp_listen_worker() releases the internal CLC socket of a listen socket, if an smc_close_active() is called. This function is called for the final release(), but it is called for shutdown SHUT_RDWR as well. This opens a door for protection faults, if socket calls using the internal CLC socket are called for a shutdown listen socket. With the changes of commit 3d502067 ("net/smc: simplify wait when closing listen socket") there is no need anymore to release the internal CLC socket in function tcp_listen_worker((). It is sufficient to release it in smc_release(). Fixes: 127f4970 ("net/smc: release clcsock from tcp_listen_worker") Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com> Reported-by: syzbot+9045fc589fcd196ef522@syzkaller.appspotmail.com Reported-by: syzbot+28a2c86cf19c81d871fa@syzkaller.appspotmail.com Reported-by: syzbot+9605e6cace1b5efd4a0a@syzkaller.appspotmail.com Reported-by: syzbot+cf9012c597c8379d535c@syzkaller.appspotmail.com Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2018 1 次提交
-
-
由 Ursula Braun 提交于
Calling shutdown with SHUT_RD and SHUT_RDWR for a listening SMC socket crashes, because commit 127f4970 ("net/smc: release clcsock from tcp_listen_worker") releases the internal clcsock in smc_close_active() and sets smc->clcsock to NULL. For SHUT_RD the smc_close_active() call is removed. For SHUT_RDWR the kernel_sock_shutdown() call is omitted, since the clcsock is already released. Fixes: 127f4970 ("net/smc: release clcsock from tcp_listen_worker") Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Reported-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 3月, 2018 2 次提交
-
-
由 Karsten Graul 提交于
Add ipv6 support to the smc socket layer functions. Make use of the updated clc layer functions to retrieve and match ipv6 information. The indicator for ipv4 or ipv6 is the protocol constant that is provided in the socket() call with address family AF_SMC. Based-on-patch-by: NTakanori Ueda <tkueda@jp.ibm.com> Signed-off-by: NKarsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
Introduce functions smc_clc_prfx_set to retrieve IP information for the CLC proposal msg and smc_clc_prfx_match to match the contents of a proposal message against the IP addresses of the net device. The new functions replace the functionality provided by smc_clc_netinfo_by_tcpsk, which is removed by this patch. The match functionality is extended to scan all ipv4 addresses of the net device for a match against the ipv4 subnet from the proposal msg. Signed-off-by: NKarsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 3月, 2018 2 次提交
-
-
由 Ursula Braun 提交于
Closing of a listen socket wakes up kernel_accept() of smc_tcp_listen_worker(), and then has to wait till smc_tcp_listen_worker() gives up the internal clcsock. The wait logic introduced with commit 127f4970 ("net/smc: release clcsock from tcp_listen_worker") might wait longer than necessary. This patch implements the idea to implement the wait just with flush_work(), and gets rid of the extra smc_close_wait_listen_clcsock() function. Fixes: 127f4970 ("net/smc: release clcsock from tcp_listen_worker") Reported-by: NHans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Make sure there is no pending or running free_work worker for the link group when freeing the link group. Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 3月, 2018 6 次提交
-
-
由 Karsten Graul 提交于
When the processing of a DELETE LINK message has started, new connections should not be added to the link group that is about to terminate. Signed-off-by: NKarsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
Add initial support for the LLC messages ADD LINK and DELETE LINK. Introduce a link state field. Extend the initial LLC handshake with ADD LINK processing. Signed-off-by: NKarsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
SMC does not support eyecatchers in RMB elements, decline peers requesting this support. Signed-off-by: NKarsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
The daddr field holds the destination IPv4 address. The field was set but never used and can be removed. The addr field was a left-over from an earlier version of non-blocking connects and can be removed. The result of the call to kernel_getpeername is not used, the call can be removed. Non-blocking connects are working, so remove restriction comment. Signed-off-by: NKarsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
The function smc_netinfo_by_tcpsk() belongs to CLC handling. Move it to smc_clc.c and rename to smc_clc_netinfo_by_tcpsk. Signed-off-by: NKarsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Raspl 提交于
Remove structures used internal only from headers. And remove an extra function parameter. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 3月, 2018 1 次提交
-
-
由 Davide Caratti 提交于
when sock_create_kern(..., a) returns an error, 'a' might not be a valid pointer, so it shouldn't be dereferenced to read a->sk->sk_sndbuf and and a->sk->sk_rcvbuf; not doing that caused the following crash: general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 4254 Comm: syzkaller919713 Not tainted 4.16.0-rc1+ #18 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:smc_create+0x14e/0x300 net/smc/af_smc.c:1410 RSP: 0018:ffff8801b06afbc8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8801b63457c0 RCX: ffffffff85a3e746 RDX: 0000000000000004 RSI: 00000000ffffffff RDI: 0000000000000020 RBP: ffff8801b06afbf0 R08: 00000000000007c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8801b6345c08 R14: 00000000ffffffe9 R15: ffffffff8695ced0 FS: 0000000001afb880(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 00000001b0721004 CR4: 00000000001606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __sock_create+0x4d4/0x850 net/socket.c:1285 sock_create net/socket.c:1325 [inline] SYSC_socketpair net/socket.c:1409 [inline] SyS_socketpair+0x1c0/0x6f0 net/socket.c:1366 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x4404b9 RSP: 002b:00007fff44ab6908 EFLAGS: 00000246 ORIG_RAX: 0000000000000035 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004404b9 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000000002b RBP: 00007fff44ab6910 R08: 0000000000000002 R09: 00007fff44003031 R10: 0000000020000040 R11: 0000000000000246 R12: ffffffffffffffff R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 Code: 48 c1 ea 03 80 3c 02 00 0f 85 b3 01 00 00 4c 8b a3 48 04 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 20 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 82 01 00 00 4d 8b 7c 24 20 48 b8 00 00 00 00 RIP: smc_create+0x14e/0x300 net/smc/af_smc.c:1410 RSP: ffff8801b06afbc8 Fixes: cd6851f3 smc: remote memory buffers (RMBs) Reported-and-tested-by: syzbot+aa0227369be2dcc26ebe@syzkaller.appspotmail.com Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 2月, 2018 1 次提交
-
-
由 Denys Vlasenko 提交于
Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 2月, 2018 1 次提交
-
-
由 Linus Torvalds 提交于
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 2月, 2018 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 26 1月, 2018 4 次提交
-
-
由 Ursula Braun 提交于
Closing a listen socket may hit the warning WARN_ON(sock_owned_by_user(sk)) of tcp_close(), if the wake up of the smc_tcp_listen_worker has not yet finished. This patch introduces smc_close_wait_listen_clcsock() making sure the listening internal clcsock has been closed in smc_tcp_listen_work(), before the listening external SMC socket finishes closing. Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Proper socket refcounting makes the sock_put worker obsolete. Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Increase the socket refcount during poll wait. Take the socket lock before checking socket state. For a listening socket return a mask independent of state SMC_ACTIVE and cover errors or closed state as well. Get rid of the accept_q loop in smc_accept_poll(). Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Once a linkgroup is created successfully, it stays alive for a certain time to service more connections potentially created. If one of the initialization steps for a new linkgroup fails, the linkgroup should not be reused by other connections following. Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 1月, 2018 2 次提交
-
-
由 Ursula Braun 提交于
Cleanup to avoid duplicate code in smc_clcsock_accept(). No functional change. Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Cleanup to consistently exploit the local struct sock definitions. No functional change. Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 12月, 2017 2 次提交
-
-
由 Ursula Braun 提交于
According to RFC7609 [1] the CLC proposal message contains an area of unknown length for future growth. Additionally it may contain up to 8 IPv6 prefixes. The current version of the SMC-code does not understand CLC proposal messages using these variable length fields and, thus, is incompatible with SMC implementations in other operating systems. This patch makes sure, SMC understands incoming CLC proposals * with arbitrary length values for future growth * with up to 8 IPv6 prefixes [1] SMC-R Informational RFC: http://www.rfc-editor.org/info/rfc7609Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: NHans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Let smc_clc_send_decline() return with an error, if the amount sent is smaller than the length of an smc decline message. Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 11月, 2017 2 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 26 10月, 2017 1 次提交
-
-
由 Ursula Braun 提交于
The SMC protocol [1] uses a rendezvous protocol to negotiate SMC capability between peers. The current Linux implementation does not yet use this rendezvous protocol and, thus, is not compliant to RFC7609 and incompatible with other SMC implementations like in zOS. This patch adds support for the SMC rendezvous protocol. It uses a new TCP experimental option. With this option, SMC capabilities are exchanged between the peers during the TCP three way handshake. [1] SMC-R Informational RFC: http://www.rfc-editor.org/info/rfc7609Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-