The trap handler is like an interrupt handler running on the GPU
compute unit. It is needed for supporting CWSR (compute wave
save/restore).

This file defines an array with the pre-compiled GFXv8 shader ISA.
The assembly code is included for reference in #if 0 ... #endif.
Signed-off-by: NShaoyun.liu <shaoyun.liu@amd.com>
Signed-off-by: NJay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

The PQM doesn't change after process creation. So initialize it in
kfd_create_process_device_data.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Replace (ffs(size) - 1) with order_base_2(size) as a more straight
forward way to get log2 of buffer sizes.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Don't use sizeof(uint32_t) or similar types for hardware or firmware
DWORD size. The hardware and firmware don't care about Linux types.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Signed-off-by: NPhilip Cox <Philip.Cox@amd.com>
Signed-off-by: Nshaoyun liu <shaoyun.liu@amd.com>
Signed-off-by: NJay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Signed-off-by: Nshaoyun liu <shaoyun.liu@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Signed-off-by: NPhilip Cox <Philip.Cox@amd.com>
Signed-off-by: Nshaoyun liu <shaoyun.liu@amd.com>
Signed-off-by: NYong Zhao <yong.zhao@amd.com>
Signed-off-by: NJay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Save wptr in hqd_sdma_destroy, restore it in hqd_sdma_load. Also
read updated wptr from user mode when resuming an SDMA queue.
Signed-off-by: NJay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: NYong Zhao <yong.zhao@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Add wptr and mm parameters to hqd_sdma_load and pass these parameters
from device_queue_manager through the mqd_manager.

SDMA doesn't support polling while the engine believes it's idle. The
driver must update the wptr. The new parameters will be used for looking
up the updated value from the specified mm when SDMA queues are resumed
after being disabled.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: (171 commits)
  drm/amdgpu: fix test for shadow page tables
  drm/amd/display: Expose dpp1_set_cursor_attributes
  drm/amd/display: Update FMT and OPPBUF functions
  drm/amd/display: check for null before calling is_blanked
  drm/amd/display: dal 3.1.27
  drm/amd/display: Fix unused variable warnings.
  drm/amd/display: Only blank DCN when we have set_blank implementation
  drm/amd/display: Put dcn_mi_registers with other structs
  drm/amd/display: hubp refactor
  drm/amd/display: integrating optc pseudocode
  drm/amd/display: Call validate_fbc should_enable_fbc
  drm/amd/display: Clean up DCN cursor code
  drm/amd/display: fix 180 full screen pipe split
  drm/amd/display: reprogram surface config on scaling change
  drm/amd/display: Remove dwbc from pipe_ctx
  drm/amd/display: Use the maximum link setting which EDP reported.
  drm/amd/display: Add hdr_supported flag
  drm/amd/display: fix global sync param retrieval when not pipe splitting
  drm/amd/display: Update HUBP
  drm/amd/display: fix rotated surface scaling
  ...

omapdrm changes for v4.16

* support memory bandwidth limits
* DSI command mode panel cleanups for N9
* DMM error handling

* tag 'omapdrm-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (27 commits)
  drm: omapdrm: Simplify platform registration
  drm: omapdrm: Remove filename from header and fix copyright tag
  drm/omap: DMM: Check for DMM readiness after successful transaction commit
  drm/omap: DMM: Print information if we received an error interrupt
  drm/omap: DMM: In case of error/timeout in wait_status() print the reason
  drm/omap: DMM: Fix DMM_IRQSTAT_ERR_MASK definition
  drm: omapdrm: Deconstruct the omap_drv.h header.
  drm: omapdrm: venc: Return error code on OF parsing failure
  drm: omapdrm: dpi: Remove dpi_data port_initialized field
  drm: omapdrm: dss: Make dss_dump_clocks() function static
  drm: omapdrm: dss: Set the DMA coherent mask
  drm: omapdrm: Remove unused omap_dss_find_device() function
  drm: omapdrm: Pass drm_device to omap_gem_resume()
  drm: omapdrm: dpi: Don't treat GPIO probe deferral as an error
  drm/omap: panel-dsi-cm: switch to gpiod
  drm/omap: panel-dsi-cm: add external backlight support
  drm/omap: panel-dsi-cm: add physical size support
  drm/omap: panel-dsi-cm: add regulator support
  drm/omap: panel-dsi-cm: fix driver
  drm/omap: add support for physical size hints from display drivers
  ...

drm/tilcdc changes for 4.16

* tag 'tilcdc-4.16' of https://github.com/jsarha/linux:
  drm/tilcdc: make tilcdc_mode_hvtotal() static
  drm/tilcdc: Remove drm_framebuffer_get() and *_put() calls
  drm/tilcdc: ensure nonatomic iowrite64 is not used

- Fix documentation build issues (Randy, Markus)
- Fix timestamp frequency calculation for perf on CNL (Lionel)
- New DMC firmware for Skylake (Anusha)
- GTT flush fixes and other GGTT write track and refactors (Chris)
- Taint kernel when GPU reset fails (Chris)
- Display workarounds organization (Lucas)
- GuC and HuC initialization clean-up and fixes (Michal)
- Other fixes around GuC submission (Michal)
- Execlist clean-ups like caching ELSP reg offset and improving log readability (Chri\
s)
- Many other improvements on our logs and dumps (Chris)
- Restore GT performance in headless mode with DMC loaded (Tvrtko)
- Stop updating legacy fb parameters since FBC is not using anymore (Daniel)
- More selftest improvements (Chris)
- Preemption fixes and improvements (Chris)
- x86/early-quirks improvements for Intel graphics stolen memory. (Joonas, Matthew)
- Other improvements on Stolen Memory code to be resource centric. (Matthew)
- Improvements and fixes on fence allocation/release (Chris).

GVT:

- fixes for two coverity scan errors (Colin)
- mmio switch code refine (Changbin)
- more virtual display dmabuf fixes (Tina/Gustavo)
- misc cleanups (Pei)
- VFIO mdev display dmabuf interface and gvt support (Tina)
- VFIO mdev opregion support/fixes (Tina/Xiong/Chris)
- workload scheduling optimization (Changbin)
- preemption fix and temporal workaround (Zhenyu)
- and misc fixes after refactor (Chris)

* tag 'drm-intel-next-2017-12-14' of git://anongit.freedesktop.org/drm/drm-intel: (87 commits)
  drm/i915: Update DRIVER_DATE to 20171214
  drm/i915: properly init lockdep class
  drm/i915: Show engine state when hangcheck detects a stall
  drm/i915: make CS frequency read support missing more obvious
  drm/i915/guc: Extract doorbell verification into a function
  drm/i915/guc: Extract clients allocation to submission_init
  drm/i915/guc: Extract doorbell creation from client allocation
  drm/i915/guc: Call invalidate after changing the vfunc
  drm/i915/guc: Extract guc_init from guc_init_hw
  drm/i915/guc: Move GuC workqueue allocations outside of the mutex
  drm/i915/guc: Move shared data allocation away from submission path
  drm/i915: Unwind i915_gem_init() failure
  drm/i915: Ratelimit request allocation under oom
  drm/i915: Allow fence allocations to fail
  drm/i915: Mark up potential allocation paths within i915_sw_fence as might_sleep
  drm/i915: Don't check #active_requests from i915_gem_wait_for_idle()
  drm/i915/fence: Use rcu to defer freeing of irq_work
  drm/i915: Dump the engine state before declaring wedged from wait_for_engines()
  drm/i915: Bump timeout for wait_for_engines()
  drm/i915: Downgrade misleading "Memory usable" message
  ...

They don't work 100% correctly at the moment.
Reviewed-and-Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NYue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Updates to FMT and OPPBUF programming from HW team
pseudocode review.
Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NYue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: NEric Bernstein <Eric.Bernstein@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAndrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

... since linux kernel compile treats warnings as errors.
Signed-off-by: NLeo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Also rename timing_generator to optc
Signed-off-by: NYue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: NEric Bernstein <Eric.Bernstein@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NYue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NYue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

validate_fbc never fails a modeset. It's simply used to decide whether
to use FBC or not. Calling it validate_fbc might be confusing to some so
rename it to should_enable_fbc.

With that let's also remove the DC_STATUS return code and return bool
and make enable_fbc a void function since we never check it's return
value and probably never want to anyways.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When plane size changes, we need to reprogram surface pitch in addition
to viewport and scaler. This change is a conservative way to make this happen.
However it could be more optimized to move pitch programming into
mem_program_viewport.
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Reviewed-by: NAndrew Jiang <Andrew.Jiang@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHugo Hu <hugo.hu@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is a resubmit with the errors fixed
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Reviewed-by: NAndrew Jiang <Andrew.Jiang@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Original applied dm_restore_drm_connector_state() has got removed.
Set link status to BAD before hotplug() event could trigger
another modeset from userspace.

The fix "Fix MST daisy chain SST not light up" commit makes so it is trying
to create a stream prior to dc_sink. That makes dc_sink is not present in
create_stream_for_sink().
Signed-off-by: NJerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NVitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Do DC level mode change checks (via dc_stream_state) only when creating
a new stream, as this check is uneccessary without a new dc_stream_state
anyways. Doing so better demonstrates the intent of this mode-change
check, in comparison to guarding it with the 'enable' flag.
Signed-off-by: NLeo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NVitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>