With ib_qib options:

    options ib_qib krcvqs=1 pcie_caps=0x51 rcvhdrcnt=4096 singleport=1 ibmtu=4

a run of ib_write_bw -a yields the following:

    ------------------------------------------------------------------
     #bytes     #iterations    BW peak[MB/sec]    BW average[MB/sec]
     1048576   5000           2910.64            229.80
    ------------------------------------------------------------------

The top cpu use in a profile is:

    CPU: Intel Architectural Perfmon, speed 2400.15 MHz (estimated)
    Counted CPU_CLK_UNHALTED events (Clock cycles when not halted) with a unit mask
    of 0x00 (No unit mask) count 1002300
    Counted LLC_MISSES events (Last level cache demand requests from this core that
    missed the LLC) with a unit mask of 0x41 (No unit mask) count 10000
    samples  %        samples  %        app name                 symbol name
    15237    29.2642  964      17.1195  ib_qib.ko                qib_7322intr
    12320    23.6618  1040     18.4692  ib_qib.ko                handle_7322_errors
    4106      7.8860  0              0  vmlinux                  vsnprintf


Analysis of the stats, profile, the code, and the annotated profile indicate:
 - All of the overflow interrupts (one per packet overflow) are
   serviced on CPU0 with no mitigation on the frequency.
 - All of the receive interrupts are being serviced by CPU0.  (That is
   the way truescale.cmds statically allocates the kctx IRQs to CPU)
 - The code is spending all of its time servicing QIB_I_C_ERROR
   RcvEgrFullErr interrupts on CPU0, starving the packet receive
   processing.
 - The decode_err routine is very inefficient, using a printf variant
   to format a "%s" and continues to loop when the errs mask has been
   cleared.
 - Both qib_7322intr and handle_7322_errors read pci registers, which
   is very inefficient.

The fix does the following:
 - Adds a tasklet to service QIB_I_C_ERROR
 - Replaces the very inefficient scnprintf() with a memcpy().  A field
   is added to qib_hwerror_msgs to save the sizeof("string") at
   compile time so that a strlen is not needed during err_decode().
 - The most frequent errors (Overflows) are serviced first to exit the
   loop as early as possible.
 - The loop now exits as soon as the errs mask is clear rather than
   fruitlessly looping through the msp array.

With this fix the performance changes to:

    ------------------------------------------------------------------
     #bytes     #iterations    BW peak[MB/sec]    BW average[MB/sec]
     1048576   5000           2990.64            2941.35
    ------------------------------------------------------------------

During testing of the error handling overflow patch, it was determined
that some CPU's were slower when servicing both overflow and receive
interrupts on CPU0 with different MSI interrupt vectors.

This patch adds an option (krcvq01_no_msi) to not use a dedicated MSI
interrupt for kctx's < 2 and to service them on the default interrupt.
For some CPUs, the cost of the interrupt enter/exit is more costly
than then the additional PCI read in the default handler.
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Many features were added to this driver, so the driver version should change too.
Signed-off-by: NDotan Barak <dotanb@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited().
Signed-off-by: NManuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Use the per port counter attached to all QPs created on that port to
implement port level packets/bytes performance counters a la IB.
Derived from a patch by Eli Cohen <eli@mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Allocate flow counter per Ethernet/IBoE port, and attach this counter
to all the QPs created on that port.  Based on patch by Eli Cohen
<eli@mellanox.co.il>.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Move the various definitions and mad structures needed for software
implementation of IBA PM agent from the ipath and qib drivers into a
single include file, which in turn could be used by more consumers.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

ConnectX devices support a set of flow counters that can be attached
to a set containing one or more QPs.  Each such counter tracks receive
and transmit packets and bytes of these QPs.  This patch queries the
device to check support for counters, handles initialization of the
HCA to enable counters, and initializes a bitmap allocator to control
counter allocations.  Derived from patch by Eli Cohen <eli@mellanox.co.il>.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix the address handle portion of the QP context structure to have the
correct bit location for the counter index field.
Signed-off-by: NEli Cohen <eli@mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Query another dword containing up to 32 extended device capabilities
and merge it into struct mlx4_caps.flags.  Update the code that
handles the current extended device capabilities (e.g UDP RSS, WoL,
vep steering, etc) to use the extended device cap flags field instead
of a field per extended capability.  Initial patch done by Eli Cohen
<eli@mellanox.co.il>.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The latest firmware adds a second dword containing more device flags,
so extend the device capabilities flags field from 32 to 64 bits.
Derived from patch by Eli Cohen <eli@mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

IBoE doesn't use LIDs.  Use the GID change event to update the IB core
cache for addition/deletion of GIDs.
Signed-off-by: NEli Cohen <eli@mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add IB GID change event type.  This is needed for IBoE when the HW
driver updates the GID (e.g when new VLANs are added/deleted) table
and the change should be reflected to the IB core cache.
Signed-off-by: NEli Cohen <eli@mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This patch fixes a kernel crash in cma_set_qkey().

When the link layer is Ethernet, it is wrong to use IPoIB port space
since no IPoIB interface is available.  Specifically, setting the
Q_Key when port space is RDMA_PS_IPOIB requires MGID calculation and
an SA query, which doesn't make sense over Ethernet.
Signed-off-by: NMoni Shoua <monis@mellanox.co.il>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

These methods don't make sense for iWARP devices, so rather than
forcing them to implement stubs, just return -ENOSYS in the core if
the hardware driver doesn't set .modify_device and/or .modify_port.
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Update the active link width on QLE7220 chips when link goes down if
chip width does not match shadowed width.
Signed-off-by: NMitko Haralanov <mitko@qlogic.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

There is a possibility of a deadlock due to the way locks are
acquired and released in qib_set_uevent_bits(). The function
qib_set_uevent_bits() is called in process context and it uses
spin_lock() and spin_unlock().  This same lock is acquired/released
in interrupt context which can lead to a deadlock when running on
the same cpu.

The fix is to replace spin_lock() and spin_unlock() with
spin_lock_irqsave() and spin_unlock_irqrestore() respectively in
qib_set_uevent_bits().
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Indicate the number of free user contexts via the sysfs file
/sys/class/infiniband/qib0/nfreectxts as required for PSM.
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The PCIE capability offset is saved during PCI bus walking.  It will
remove an unnecessary search in the PCI configuration space if this
value is referenced instead of reacquiring it.  Also, pci_is_pcie is a
better way of determining if the device is PCIE or not (as it uses the
same saved PCIE capability offset).
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NEdwin van Vliet <edwin@cheatah.nl>
Reviewed-by: NJesper Juhl <jj@chaosbits.net>
Acked-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The PCIE capability offset is saved during PCI bus walking.  It will
remove an unnecessary search in the PCI configuration space if this
value is referenced instead of reacquiring it.
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Acked-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Adapt to new api.  We plan to remove old one later.  Almost all
changes are trivial, but there is one real fix: the following code is
unsafe:

	int ncpus = num_online_cpus()
	for (i = 0; i < ncpus; i++) {
		..
	}

because 1) we don't guarantee last bit of online cpus is equal to
num_online_cpus(). some arch assign sparse cpu number.  2) cpu
hotplugging may change cpu_online_mask at same time.  we need to pin
it by get_online_cpus().
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Adapt to use new APIs.  We plan to remove old one later and plan to
change current->cpus_allowed implementation.

No functional change.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Avoid assigning an IS_ERR value to the cm_id pointer.  This fixes a
few anomalies in the error flow due to confusion about checking for
NULL vs IS_ERR, and eliminates the need to test for the IS_ERR value
every time we wish to determine if the cma_id object has a cm device
associated with it.

Also, eliminate the now-unnecessary procedure cma_has_cm_dev (we can
check directly for the existence of the device pointer -- for a
non-NULL check, makes no difference if it is the iwarp or the ib
pointer).

Finally, make a few code changes here to improve coding consistency.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Instead of having firmware command functions return an error and also
a status, leading to code like:

	err = mthca_FW_COMMAND(..., &status);
	if (err)
		goto out;
        if (status) {
		err = -E...;
		goto out;
	}

all over the place, just handle the FW status inside the FW command
handling code (the way mlx4 does it), so we can simply write:

	err = mthca_FW_COMMAND(...);
	if (err)
		goto out;

In addition to simplifying the source code, this also saves a healthy
chunk of text:

    add/remove: 0/0 grow/shrink: 10/88 up/down: 510/-3357 (-2847)
    function                                     old     new   delta
    static.trans_table                           324     584    +260
    mthca_cmd_poll                               352     477    +125
    mthca_cmd_wait                               511     567     +56
    mthca_table_put                              213     240     +27
    mthca_cleanup_db_tab                         372     387     +15
    __mthca_remove_one                           314     323      +9
    mthca_cleanup_user_db_tab                    275     283      +8
    __mthca_init_one                            1738    1746      +8
    mthca_cleanup                                 20      21      +1
    mthca_MAD_IFC                               1081    1082      +1
    mthca_MGID_HASH                               43      40      -3
    mthca_MAP_ICM_AUX                             23      20      -3
    mthca_MAP_ICM                                 19      16      -3
    mthca_MAP_FA                                  23      20      -3
    mthca_READ_MGM                                43      38      -5
    mthca_QUERY_SRQ                               43      38      -5
    mthca_QUERY_QP                                59      54      -5
    mthca_HW2SW_SRQ                               43      38      -5
    mthca_HW2SW_MPT                               60      55      -5
    mthca_HW2SW_EQ                                43      38      -5
    mthca_HW2SW_CQ                                43      38      -5
    mthca_free_icm_table                         120     114      -6
    mthca_query_srq                              214     206      -8
    mthca_free_qp                                662     654      -8
    mthca_cmd                                     38      28     -10
    mthca_alloc_db                              1321    1311     -10
    mthca_setup_hca                             1067    1055     -12
    mthca_WRITE_MTT                               35      22     -13
    mthca_WRITE_MGM                               40      27     -13
    mthca_UNMAP_ICM_AUX                           36      23     -13
    mthca_UNMAP_FA                                36      23     -13
    mthca_SYS_DIS                                 36      23     -13
    mthca_SYNC_TPT                                36      23     -13
    mthca_SW2HW_SRQ                               35      22     -13
    mthca_SW2HW_MPT                               35      22     -13
    mthca_SW2HW_EQ                                35      22     -13
    mthca_SW2HW_CQ                                35      22     -13
    mthca_RUN_FW                                  36      23     -13
    mthca_DISABLE_LAM                             36      23     -13
    mthca_CLOSE_IB                                36      23     -13
    mthca_CLOSE_HCA                               38      25     -13
    mthca_ARM_SRQ                                 39      26     -13
    mthca_free_icms                              178     164     -14
    mthca_QUERY_DDR                              389     375     -14
    mthca_resize_cq                             1063    1048     -15
    mthca_unmap_eq_icm                           123     107     -16
    mthca_map_eq_icm                             396     380     -16
    mthca_cmd_box                                 90      74     -16
    mthca_SET_IB                                 433     417     -16
    mthca_RESIZE_CQ                              369     353     -16
    mthca_MAP_ICM_page                           240     224     -16
    mthca_MAP_EQ                                 183     167     -16
    mthca_INIT_IB                                473     457     -16
    mthca_INIT_HCA                               745     729     -16
    mthca_map_user_db                            816     798     -18
    mthca_SYS_EN                                 157     139     -18
    mthca_cleanup_qp_table                        78      59     -19
    mthca_cleanup_eq_table                       168     149     -19
    mthca_UNMAP_ICM                              143     121     -22
    mthca_modify_srq                             172     149     -23
    mthca_unmap_fmr                              198     174     -24
    mthca_query_qp                               814     790     -24
    mthca_query_pkey                             343     319     -24
    mthca_SET_ICM_SIZE                            34      10     -24
    mthca_QUERY_DEV_LIM                         1870    1846     -24
    mthca_map_cmd                               1130    1105     -25
    mthca_ENABLE_LAM                             401     375     -26
    mthca_modify_port                            247     220     -27
    mthca_query_device                           884     850     -34
    mthca_NOP                                     75      41     -34
    mthca_table_get                              287     249     -38
    mthca_init_qp_table                          333     293     -40
    mthca_MODIFY_QP                              348     308     -40
    mthca_close_hca                              131      89     -42
    mthca_free_eq                                435     390     -45
    mthca_query_port                             755     705     -50
    mthca_free_cq                                581     528     -53
    mthca_alloc_icm_table                        578     524     -54
    mthca_multicast_attach                      1041     986     -55
    mthca_init_hca                               326     271     -55
    mthca_query_gid                              487     431     -56
    mthca_free_srq                               524     468     -56
    mthca_free_mr                                168     111     -57
    mthca_create_eq                             1560    1501     -59
    mthca_multicast_detach                       790     728     -62
    mthca_write_mtt                              918     854     -64
    mthca_register_device                       1406    1342     -64
    mthca_fmr_alloc                              947     883     -64
    mthca_mr_alloc                               652     582     -70
    mthca_process_mad                           1242    1164     -78
    mthca_dev_lim                                910     830     -80
    find_mgm                                     482     400     -82
    mthca_modify_qp                             3852    3753     -99
    mthca_init_cq                               1281    1181    -100
    mthca_alloc_srq                             1719    1610    -109
    mthca_init_eq_table                         1807    1679    -128
    mthca_init_tavor                             761     491    -270
    mthca_init_arbel                            2617    2098    -519
Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.de>

SCSI scanning of a channel:id:lun triplet in Linux works as follows
(function scsi_scan_target() in drivers/scsi/scsi_scan.c):

- If lun == SCAN_WILD_CARD, send a REPORT LUNS command to the target
  and process the result.

- If lun != SCAN_WILD_CARD, send an INQUIRY command to the LUN
  corresponding to the specified channel:id:lun triplet to verify
  whether the LUN exists.

So a SCSI driver must either take the channel and target id values in
account in its quecommand() function or it should declare that it only
supports one channel and one target id.

Currently the ib_srp driver does neither.  As a result scanning the
SCSI bus via e.g. rescan-scsi-bus.sh causes many duplicate SCSI
devices to be created. For each 0:0:L device, several duplicates are
created with the same LUN number and with (C:I) != (0:0). Fix this by
declaring that the ib_srp driver only supports one channel and one
target id.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Cc: <stable@kernel.org>
Acked-by: NDavid Dillow <dillowda@ornl.gov>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

That file harkens back to the days of the big 2.4 -> 2.6 version jump,
and was based even then on older versions.  Some of it is just obsolete,
and Jesper Juhl points out that it talks about kernel versions 2.6 and
should be updated to 3.0.

Remove some obsolete text, and re-phrase some other to not be 2.6-specific.
Reported-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] msp3400: fill in v4l2_tuner based on vt->type field
  [media] tuner-core.c: don't change type field in g_tuner or g_frequency
  [media] cx18/ivtv: fix g_tuner support
  [media] tuner-core: power up tuner when called with s_power(1)
  [media] v4l2-ioctl.c: check for valid tuner type in S_HW_FREQ_SEEK
  [media] tuner-core: simplify the standard fixup
  [media] tuner-core/v4l2-subdev: document that the type field has to be filled in
  [media] v4l2-subdev.h: remove unused s_mode tuner op
  [media] feature-removal-schedule: change in how radio device nodes are handled
  [media] bttv: fix s_tuner for radio
  [media] pvrusb2: fix g/s_tuner support
  [media] v4l2-ioctl.c: prefill tuner type for g_frequency and g/s_tuner
  [media] tuner-core: fix tuner_resume: use t->mode instead of t->type
  [media] tuner-core: fix s_std and s_tuner

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Reintroduce dropped call to check_wakeup_irqs

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: drop spinlock before calling cifs_put_tlink
  cifs: fix expand_dfs_referral
  cifs: move bdi_setup_and_register outside of CONFIG_CIFS_DFS_UPCALL
  cifs: factor smb_vol allocation out of cifs_setup_volume_info
  cifs: have cifs_cleanup_volume_info not take a double pointer
  cifs: fix build_unc_path_to_root to account for a prefixpath
  cifs: remove bogus call to cifs_cleanup_volume_info

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] fix cpumask memory leak in acpi-cpufreq on cpu hotplug.

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  hp-wmi: fix use after free
  dell-laptop - using buffer without mutex_lock
  Revert: "dell-laptop: Toggle the unsupported hardware killswitch"
  platform-drivers-x86: set backlight type to BACKLIGHT_PLATFORM
  thinkpad-acpi: handle HKEY 0x4010, 0x4011 events
  drivers/platform/x86: Fix memory leak
  thinkpad-acpi: handle some new HKEY 0x60xx events
  acer-wmi: fix bitwise bug when set device state
  acer-wmi: Only update rfkill status for associated hotkey events

* 'movieboard' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: do not bind to Pinnacle cards, avert panic

Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since we removed sti()/cli() and related, how about removing it from
Documentation/spinlocks.txt?
Signed-off-by: NMuthukumar R <muthur@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

...as that function can sleep.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

[  191.310008] WARNING: kmemcheck: Caught 32-bit read from freed memory (f0d25f14)
[  191.310011] c056d2f088000000105fd2f00000000050415353040000000000000000000000
[  191.310020]  i i i i f f f f f f f f f f f f f f f f f f f f f f f f f f f f
[  191.310027]                                          ^
[  191.310029]
[  191.310032] Pid: 737, comm: modprobe Not tainted 3.0.0-rc5+ #268 Hewlett-Packard HP Compaq 6005 Pro SFF PC/3047h
[  191.310036] EIP: 0060:[<f80b3104>] EFLAGS: 00010286 CPU: 0
[  191.310039] EIP is at hp_wmi_perform_query+0x104/0x150 [hp_wmi]
[  191.310041] EAX: f0d25601 EBX: f0d25f00 ECX: 000121cf EDX: 000121ce
[  191.310043] ESI: f0d25f10 EDI: f0f97ea8 EBP: f0f97ec4 ESP: c173f34c
[  191.310045]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  191.310046] CR0: 8005003b CR2: f540c000 CR3: 30f30000 CR4: 000006d0
[  191.310048] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[  191.310050] DR6: ffff4ff0 DR7: 00000400
[  191.310051]  [<f80b317b>] hp_wmi_dock_state+0x2b/0x40 [hp_wmi]
[  191.310054]  [<f80b6093>] hp_wmi_init+0x93/0x1a8 [hp_wmi]
[  191.310057]  [<c10011f0>] do_one_initcall+0x30/0x170
[  191.310061]  [<c107ab9f>] sys_init_module+0xef/0x1a60
[  191.310064]  [<c149f998>] sysenter_do_call+0x12/0x28
[  191.310067]  [<ffffffff>] 0xffffffff
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Using buffer->output[1] without mutex_lock()
Signed-off-by: NJose Alonso <joalonsof@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>