- 10 1月, 2006 10 次提交
-
-
由 Chris Pascoe 提交于
- Support for DVB reception on the PCI half of the DViCO DVB-T Dual Digital. Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Manenti Marco 提交于
- Add Kworld/Vstream Xpert DVB-T card with cx22702 tuner. Signed-off-by: NManenti Marco <marco_manenti@colman.it> Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Chris Pascoe 提交于
- Added support for VP-3054 (aka DigitalNow DNTV Live! DVB-T Pro!). - This board has a secondary I2C bus and remote control. - Added a new module to handle secondary I2C bus on this board. Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- Corrected Thomson DTT 7611 tuner programming, based on spec sheet - renamed to Thomson DTT 761x - applies to DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A (DTT 7610 is similar, but slightly different programming) - corrected frequency ranges for analog and digital modes Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- This patch adds eeprom awareness for the Roslyn. In effect, the blackbird will query the tuner V4L2_STD_xxxx definitions to determine whether it's connected to a NTSC or PAL tuner. Based on that, various default values will change for blackbird encoding. - Fixes back panel SVIDEO/COMPOSITE with audio, work properly. - Fixes a problem with lip sync issues, due to bad framerate vs audio rate assumptions. - Fixed a problem with the GPIO configuration in cx88-cards. - Removed the comments in cx88-cards that made no sense. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- Add support for another Nova-T-PCI PCI subdevice 0x9001 Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- Add support for the Hauppauge HVR1100 and HVR1100-LP products. - Add i2c_gate_ctrl callback function to dvb_frontend_ops struct. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Vadim Catana 提交于
- Add support for KWorld DVB-S 100, based on the same chips as Hauppauge Nova-S Plus (CX23883/CX24123/CX24109), without the Intersil ISL6421, which is used for LNB control. - LNB voltage and tone are controled by LNBDC and LNBTone bits from register 0x29 of the CX24123 demodulator. - The MO_GP0_IO register from CX23883 is used to turn LNB power on and off. Signed-off-by: NVadim Catana <skystar@moldova.cc> Acked-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- Enable IR support for the Nova-S-Plus. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- Added V4L support for the Nova-S-Plus and Nova-SE2 DVB-S products. - Basic DVB-S support is working, analog video inputs work. - It has one or two fixme comments, primarily analog GPIOs (audio) and eeprom parsing. - CX24123 code (in cx88-dvb.c) disabled until the - cx24123 module is added to dvb-kernel cvs. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
- 05 12月, 2005 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
- fix analog NTSC for pcHDTV 3000 - Fix regression: broken analog NTSC for DViCO FusionHDTV3 Gold-T - add tda9887 to card struct, required for both cards. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 12月, 2005 3 次提交
-
-
由 Steven Toth 提交于
- Fixed code handling for eeprom on cx88 boards. - Hauppauge released a new version of the Nova-T-PCI (9002) a few months ago with a different (compatible) tuner (but lacking RF passthru). The official model# is 90003. All features are working. - Adding entry to the known model list after testing. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Steven Toth 提交于
- Added a mac address field to the tveeprom structure. - allow callers to query the MAC address. - removed some redundant eeprom parsing code in cx88-cards.c (specific to Hauppauge DVB products) Instead, placed calls directly to the single eeprom parsing function in tveeprom.c Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Steven Toth 提交于
Include comments for DVB models and includes missing ones Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 11月, 2005 9 次提交
-
-
由 Lubomir Bulej 提交于
- New Avermedia 303 card (without radio). Signed-off-by: NLubomir Bulej <bulej@nenya.ms.mff.cuni.cz> Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kirk Lapray 提交于
- Added support for NXT200X based cards (ATI HDTV Wonder) Signed-off-by: NKirk Lapray <kirk.lapray@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
- Whitespace Cleanups. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nickolay V. Shmyrev 提交于
- New config option for tda9887 to specifically set intercarrier Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Shirley 提交于
- Add DVB card WinFast DTV1000-T Signed-off-by: NDavid Shirley <David.Shirley@team.telstra.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kirk Lapray 提交于
- Added analog support for ATI HDTV Wonder Signed-off-by: NKirk Lapray <kirk.lapray@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexander Wold 提交于
- Added Kworld Vstream ExpertDVD. Signed-off-by: NAlexander Wold <awold@bigfoot.com> Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
- Capitalized hex A-F changed to lowercase in pci subsystem id constants Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nickolay V. Shmyrev 提交于
- Added new Avermedia card 550 Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 9月, 2005 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
- tveeprom improved and updated to reflect newer Hauppage cards. - CodingStyle fixes. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
- Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: NUli Luckas <luckas@musoft.de> Signed-off-by: NTorsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NPatrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: NCatalin Climov <catalin@climov.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 8月, 2005 2 次提交
-
-
由 Michael Krufky 提交于
Peter Missel: - Add support for the SVideo input on the GDI Black Gold. Mauro Carvalho Chehab: - Linux/version.h removed. Replaced by linux/utsname.h Michael Krufky: - Added analog support for DViCO FusionHDTV5 Gold. CC: Peter Missel <peter.missel@onlinehome.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
- Fixed some bttv card numbers. - BTTV and SAA7134 version numbers incremented to reflect changes. - pci_dma_supported() is called after pci_set_dma_mask() which already did check that for us. This patch removes the unneeded call to pci_dma_supported() at bttv-driver.c - Ensure a sufficient I2C bus idle time between 2 messages for saa7134-i2c.c - It is important to write at first to MO_GP3_IO for cx88-tvaudio.c - Use try_to_freeze() instead of refrigerator at msp3400.c - Recognizing the MFPE05-2 Tuner at tveeprom.c - Add new parameter to help identify radio chipsets at tuner module: show_i2c=1 will show 16 reading bytes from detected tuners. - BTTV does generate some Unimplemented IOCTL log at tuner module: 0x40046d11(dir=1,tp=0x6d,nr=17,sz=4) means that it is sending MSP3400 calls to non-msp3400 tuners. Warning eliminated. VIDIOSAUDIO is also called, so debug messages updated. It is still requiring IOCTL implementation. - Added two more tuners. - Add support for the SVideo input on the GDI Black Gold. Signed-off-by: NPeter Missel <peter.missel@onlinehome.de> Signed-off-by: NGraham Bevan <graham.bevan@ntlworld.com> Signed-off-by: NTorsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 16 7月, 2005 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
- In CX88 code, some cards needs to have audio reprogramed after changing video channel; - Tuner autodetection code seems not to work on some cards. Now, no_autodetect insmod option allows disabling autodetection code; - Minor fixes in tea5767 to reduce integer trunc; - There are some new Pixelview Ultra Pro cards that doesn't use TEA5767 for radio. As autodetection is capable of checking for tea, radio tuners and addresses removed. - CX88 version number incremented. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 7月, 2005 4 次提交
-
-
由 Michael Krufky 提交于
- Correct sync byte for MPEG-2 transport stream packets. - Add lgdt3302 as dependency of cx88-dvb in Kconfig. - Add dvb support in v4l for DViCO FusionHDTV3 Gold-T using lgdt3302 frontend. This adds support for a different board from the previous (Gold-Q) patch. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
Add support for TerraTec Cinergy 1400 DVB-T. Signed-off-by: NUli Luckas <luckas@musoft.de> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
Add dvb support in v4l for DViCO FusionHDTV3 Gold-Q using lgdt3302 frontend. Signed-off-by: NMac Michaels <wmichaels1@earthlink.net> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
- Add support for ADS Tech Instant TV DVB-T PCI. - Remove obsoleted config options. - Fix DViCO Board names - Remove CABLE type setting from DViCO FusionHDTV3 Gold-T. - Fix compilation with gcc4.0. - V4L2_TUNER_CAP_LOW implemented according with V4L2 API for Radio. - radio range is now defined on tuner-core.c. Cleaning up. - Fix a bug on frequency report for cx88 based cards. - Added support for changing radio mode stereo/mono. - Add remove for MSI TV@nywhere. Signed-off-by: Jorik Jonker <jorik@dnd.utwente.nl>. Signed-off-by: NDidier Caillaud <mailing.cld@free.fr> Signed-off-by: Benoit Laniel <benoit.laniel@gmail.com>. Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 6月, 2005 5 次提交
-
-
由 Mauro Carvalho Chehab 提交于
This patch adds support for various CX88 cards and allows specifying card addresses. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: Ncybercide@f2s.com <cybercide@f2s.com> Signed-off-by: NCatalin Climov <catalin@climov.com> Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
Add support for tuner#60: Thomson DDT 7611 (ATSC/NTSC) Change tuner in card#28 (DViCO FusionHDTV3 Gold-T) from tuner=52 (Tuner Thomson DDT 7610) to tuner=60 (Tuner Thomson DDT 7611) Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
Even though it says DViCO FusionHDTV3 Gold-Q on the box, Gold-T is printed on the card. This fix corrects the error in all places, and corrects the tuner name Thomson DDT 7611 (ATSC/NTSC) in the documentation. This applies against 2.6.12-rc5-mm2 after applying Manueal Capinha's patch "Add support for PixelView Ultra Pro in v4l" (because of the change from card=27 to card=28) Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Manuel Capinha 提交于
The following patch adds support for the PixelView Ultra Pro video capture card in v4l. - It removes the remote control key definitions from ir-kbd-gpio.c and moves them to ir-common.c so that they can be shared between bt878 and cx88 based cards. - The patch also moves the FUSIONHDTV_3_GOLD_Q card from number 27 to 28 to regain compatibility with the V4L cvs. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
This patch allows full analog functionality for the DViCO FusionHDTV3 Gold-Q, 18ac:d820 which has a Conexant cx23882, Thompson7611, and LG 3202. It does NOT yet support digital decoding or digital audio without the internal analog audio jack connected to the sound board, but it works perfectly in analog mode. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-