- 26 6月, 2015 8 次提交
-
-
由 Dan Williams 提交于
There is no hardware limit to enforce on the size of the i/o that can be passed to an nvdimm block device, so set it to UINT_MAX. Reviewed-by: NVishal Verma <vishal.l.verma@linux.intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Vishal Verma 提交于
Support multiple block sizes (sector + metadata) for nd_blk in the same way as done for the BTT. Add the idea of an 'internal' lbasize, which is properly aligned and padded, and store metadata in this space. Signed-off-by: NVishal Verma <vishal.l.verma@linux.intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Vishal Verma 提交于
Support multiple block sizes (sector + metadata) using the blk integrity framework. This registers a new integrity template that defines the protection information tuple size based on the configured metadata size, and simply acts as a passthrough for protection information generated by another layer. The metadata is written to the storage as-is, and read back with each sector. Signed-off-by: NVishal Verma <vishal.l.verma@linux.intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Vishal Verma 提交于
If a block device has bio integrity enabled, rw_page will bypass the integrity payload, which is undesirable. Skip rw_page if this is the case. Currently brd and zram provide rw_page, and the proposed 'nd' drivers will too. Cc: Jens Axboe <axboe@fb.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Suggested-by: NMatthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: NVishal Verma <vishal.l.verma@linux.intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Maintainer information and documentation for drivers/nvdimm Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jens Axboe <axboe@fb.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
'libnvdimm' is the first driver sub-system in the kernel to implement mocking for unit test coverage. The nfit_test module gets built as an external module and arranges for external module replacements of nfit, libnvdimm, nd_pmem, and nd_blk. These replacements use the linker --wrap option to redirect calls to ioremap() + request_mem_region() to custom defined unit test resources. The end result is a fully functional nvdimm_bus, as far as userspace is concerned, but with the capability to perform otherwise destructive tests on emulated resources. Q: Why not use QEMU for this emulation? QEMU is not suitable for unit testing. QEMU's role is to faithfully emulate the platform. A unit test's role is to unfaithfully implement the platform with the goal of triggering bugs in the corners of the sub-system implementation. As bugs are discovered in platforms, or the sub-system itself, the unit tests are extended to backstop a fix with a reproducer unit test. Another problem with QEMU is that it would require coordination of 3 software projects instead of 2 (kernel + libndctl [1]) to maintain and execute the tests. The chances for bit rot and the difficulty of getting the tests running goes up non-linearly the more components involved. Q: Why submit this to the kernel tree instead of external modules in libndctl? Simple, to alleviate the same risk that out-of-tree external modules face. Updates to drivers/nvdimm/ can be immediately evaluated to see if they have any impact on tools/testing/nvdimm/. Q: What are the negative implications of merging this? It is a unique maintenance burden because the purpose of mocking an interface to enable a unit test is to purposefully short circuit the semantics of a routine to enable testing. For example __wrap_ioremap_cache() fakes the pmem driver into "ioremap()'ing" a test resource buffer allocated by dma_alloc_coherent(). The future maintenance burden hits when someone changes the semantics of ioremap_cache() and wonders what the implications are for the unit test. [1]: https://github.com/pmem/ndctl Cc: <linux-acpi@vger.kernel.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Ross Zwisler 提交于
The libnvdimm implementation handles allocating dimm address space (DPA) between PMEM and BLK mode interfaces. After DPA has been allocated from a BLK-region to a BLK-namespace the nd_blk driver attaches to handle I/O as a struct bio based block device. Unlike PMEM, BLK is required to handle platform specific details like mmio register formats and memory controller interleave. For this reason the libnvdimm generic nd_blk driver calls back into the bus provider to carry out the I/O. This initial implementation handles the BLK interface defined by the ACPI 6 NFIT [1] and the NVDIMM DSM Interface Example [2] composed from DCR (dimm control region), BDW (block data window), IDT (interleave descriptor) NFIT structures and the hardware register format. [1]: http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf [2]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jens Axboe <axboe@fb.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Vishal Verma 提交于
BTT stands for Block Translation Table, and is a way to provide power fail sector atomicity semantics for block devices that have the ability to perform byte granularity IO. It relies on the capability of libnvdimm namespace devices to do byte aligned IO. The BTT works as a stacked blocked device, and reserves a chunk of space from the backing device for its accounting metadata. It is a bio-based driver because all IO is done synchronously, and there is no queuing or asynchronous completions at either the device or the driver level. The BTT uses 'lanes' to index into various 'on-disk' data structures, and lanes also act as a synchronization mechanism in case there are more CPUs than available lanes. We did a comparison between two lane lock strategies - first where we kept an atomic counter around that tracked which was the last lane that was used, and 'our' lane was determined by atomically incrementing that. That way, for the nr_cpus > nr_lanes case, theoretically, no CPU would be blocked waiting for a lane. The other strategy was to use the cpu number we're scheduled on to and hash it to a lane number. Theoretically, this could block an IO that could've otherwise run using a different, free lane. But some fio workloads showed that the direct cpu -> lane hash performed faster than tracking 'last lane' - my reasoning is the cache thrash caused by moving the atomic variable made that approach slower than simply waiting out the in-progress IO. This supports the conclusion that the driver can be a very simple bio-based one that does synchronous IOs instead of queuing. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jens Axboe <axboe@fb.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg KH <gregkh@linuxfoundation.org> [jmoyer: fix nmi watchdog timeout in btt_map_init] [jmoyer: move btt initialization to module load path] [jmoyer: fix memory leak in the btt initialization path] [jmoyer: Don't overwrite corrupted arenas] Signed-off-by: NVishal Verma <vishal.l.verma@linux.intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 25 6月, 2015 16 次提交
-
-
由 Dan Williams 提交于
NVDIMM namespaces, in addition to accepting "struct bio" based requests, also have the capability to perform byte-aligned accesses. By default only the bio/block interface is used. However, if another driver can make effective use of the byte-aligned capability it can claim namespace interface and use the byte-aligned ->rw_bytes() interface. The BTT driver is the initial first consumer of this mechanism to allow adding atomic sector update semantics to a pmem or blk namespace. This patch is the sysfs infrastructure to allow configuring a BTT instance for a namespace. Enabling that BTT and performing i/o is in a subsequent patch. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
After 'uuid', 'size', 'sector_size', and optionally 'alt_name' have been set to valid values the labels on the dimm can be updated. The difference with the pmem case is that blk namespaces are limited to one dimm and can cover discontiguous ranges in dpa space. Also, after allocating label slots, it is useful for userspace to know how many slots are left. Export this information in sysfs. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
After 'uuid', 'size', and optionally 'alt_name' have been set to valid values the labels on the dimms can be updated. Write procedure is: 1/ Allocate and write new labels in the "next" index 2/ Free the old labels in the working copy 3/ Write the bitmap and the label space on the dimm 4/ Write the index to make the update valid Label ranges directly mirror the dpa resource values for the given label_id of the namespace. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
A blk label set describes a namespace comprised of one or more discontiguous dpa ranges on a single dimm. They may alias with one or more pmem interleave sets that include the given dimm. This is the runtime/volatile configuration infrastructure for sysfs manipulation of 'alt_name', 'uuid', 'size', and 'sector_size'. A later patch will make these settings persistent by writing back the label(s). Unlike pmem namespaces, multiple blk namespaces can be created per region. Once a blk namespace has been created a new seed device (unconfigured child of a parent blk region) is instantiated. As long as a region has 'available_size' != 0 new child namespaces may be created. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
A complete label set is a PMEM-label per-dimm per-interleave-set where all the UUIDs match and the interleave set cookie matches the hosting interleave set. Present sysfs attributes for manipulation of a PMEM-namespace's 'alt_name', 'uuid', and 'size' attributes. A later patch will make these settings persistent by writing back the label. Note that PMEM allocations grow forwards from the start of an interleave set (lowest dimm-physical-address (DPA)). BLK-namespaces that alias with a PMEM interleave set will grow allocations backward from the highest DPA. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
This on media label format [1] consists of two index blocks followed by an array of labels. None of these structures are ever updated in place. A sequence number tracks the current active index and the next one to write, while labels are written to free slots. +------------+ | | | nsindex0 | | | +------------+ | | | nsindex1 | | | +------------+ | label0 | +------------+ | label1 | +------------+ | | ....nslot... | | +------------+ | labelN | +------------+ After reading valid labels, store the dpa ranges they claim into per-dimm resource trees. [1]: http://pmem.io/documents/NVDIMM_Namespace_Spec.pdf Cc: Neil Brown <neilb@suse.de> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
On platforms that have firmware support for reading/writing per-dimm label space, a portion of the dimm may be accessible via an interleave set PMEM mapping in addition to the dimm's BLK (block-data-window aperture(s)) interface. A label, stored in a "configuration data region" on the dimm, disambiguates which dimm addresses are accessed through which exclusive interface. Add infrastructure that allows the kernel to block modifications to a label in the set while any member dimm is active. Note that this is meant only for enforcing "no modifications of active labels" via the coarse ioctl command. Adding/deleting namespaces from an active interleave set is always possible via sysfs. Another aspect of tracking interleave sets is tracking their integrity when DIMMs in a set are physically re-ordered. For this purpose we generate an "interleave-set cookie" that can be recorded in a label and validated against the current configuration. It is the bus provider implementation's responsibility to calculate the interleave set cookie and attach it to a given region. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NChristoph Hellwig <hch@lst.de> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
nd_pmem attaches to persistent memory regions and namespaces emitted by the libnvdimm subsystem, and, same as the original pmem driver, presents the system-physical-address range as a block device. The existing e820-type-12 to pmem setup is converted to an nvdimm_bus that emits an nd_namespace_io device. Note that the X in 'pmemX' is now derived from the parent region. This provides some stability to the pmem devices names from boot-to-boot. The minor numbers are also more predictable by passing 0 to alloc_disk(). Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jens Axboe <axboe@fb.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Acked-by: NChristoph Hellwig <hch@lst.de> Tested-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Prepare the pmem driver to consume PMEM namespaces emitted by regions of an nvdimm_bus instance. No functional change. Acked-by: NChristoph Hellwig <hch@lst.de> Tested-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
The libnvdimm region driver is an intermediary driver that translates non-volatile "region"s into "namespace" sub-devices that are surfaced by persistent memory block-device drivers (PMEM and BLK). ACPI 6 introduces the concept that a given nvdimm may simultaneously offer multiple access modes to its media through direct PMEM load/store access, or windowed BLK mode. Existing nvdimms mostly implement a PMEM interface, some offer a BLK-like mode, but never both as ACPI 6 defines. If an nvdimm is single interfaced, then there is no need for dimm metadata labels. For these devices we can take the region boundaries directly to create a child namespace device (nd_namespace_io). Acked-by: NChristoph Hellwig <hch@lst.de> Tested-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
A "region" device represents the maximum capacity of a BLK range (mmio block-data-window(s)), or a PMEM range (DAX-capable persistent memory or volatile memory), without regard for aliasing. Aliasing, in the dimm-local address space (DPA), is resolved by metadata on a dimm to designate which exclusive interface will access the aliased DPA ranges. Support for the per-dimm metadata/label arrvies is in a subsequent patch. The name format of "region" devices is "regionN" where, like dimms, N is a global ida index assigned at discovery time. This id is not reliable across reboots nor in the presence of hotplug. Look to attributes of the region or static id-data of the sub-namespace to generate a persistent name. However, if the platform configuration does not change it is reasonable to expect the same region id to be assigned at the next boot. "region"s have 2 generic attributes "size", and "mapping"s where: - size: the BLK accessible capacity or the span of the system physical address range in the case of PMEM. - mappingN: a tuple describing a dimm's contribution to the region's capacity in the format (<nmemX>,<dpa>,<size>). For a PMEM-region there will be at least one mapping per dimm in the interleave set. For a BLK-region there is only "mapping0" listing the starting DPA of the BLK-region and the available DPA capacity of that space (matches "size" above). The max number of mappings per "region" is hard coded per the constraints of sysfs attribute groups. That said the number of mappings per region should never exceed the maximum number of possible dimms in the system. If the current number turns out to not be enough then the "mappings" attribute clarifies how many there are supposed to be. "32 should be enough for anybody...". Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NChristoph Hellwig <hch@lst.de> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
* Implement the device-model infrastructure for loading modules and attaching drivers to nvdimm devices. This is a simple association of a nd-device-type number with a driver that has a bitmask of supported device types. To facilitate userspace bind/unbind operations 'modalias' and 'devtype', that also appear in the uevent, are added as generic sysfs attributes for all nvdimm devices. The reason for the device-type number is to support sub-types within a given parent devtype, be it a vendor-specific sub-type or otherwise. * The first consumer of this infrastructure is the driver for dimm devices. It simply uses control messages to retrieve and store the configuration-data image (label set) from each dimm. Note: nd_device_register() arranges for asynchronous registration of nvdimm bus devices by default. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: NChristoph Hellwig <hch@lst.de> Tested-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Most discovery/configuration of the nvdimm-subsystem is done via sysfs attributes. However, some nvdimm_bus instances, particularly the ACPI.NFIT bus, define a small set of messages that can be passed to the platform. For convenience we derive the initial libnvdimm-ioctl command formats directly from the NFIT DSM Interface Example formats. ND_CMD_SMART: media health and diagnostics ND_CMD_GET_CONFIG_SIZE: size of the label space ND_CMD_GET_CONFIG_DATA: read label space ND_CMD_SET_CONFIG_DATA: write label space ND_CMD_VENDOR: vendor-specific command passthrough ND_CMD_ARS_CAP: report address-range-scrubbing capabilities ND_CMD_ARS_START: initiate scrubbing ND_CMD_ARS_STATUS: report on scrubbing state ND_CMD_SMART_THRESHOLD: configure alarm thresholds for smart events If a platform later defines different commands than this set it is straightforward to extend support to those formats. Most of the commands target a specific dimm. However, the address-range-scrubbing commands target the bus. The 'commands' attribute in sysfs of an nvdimm_bus, or nvdimm, enumerate the supported commands for that object. Cc: <linux-acpi@vger.kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reported-by: NNicholas Moulin <nicholas.w.moulin@linux.intel.com> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Enable nvdimm devices to be registered on a nvdimm_bus. The kernel assigned device id for nvdimm devicesis dynamic. If userspace needs a more static identifier it should consult a provider-specific attribute. In the case where NFIT is the provider, the 'nmemX/nfit/handle' or 'nmemX/nfit/serial' attributes may be used for this purpose. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NChristoph Hellwig <hch@lst.de> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
The control device for a nvdimm_bus is registered as an "nd" class device. The expectation is that there will usually only be one "nd" bus registered under /sys/class/nd. However, we allow for the possibility of multiple buses and they will listed in discovery order as ndctl0...ndctlN. This character device hosts the ioctl for passing control messages. The initial command set has a 1:1 correlation with the commands listed in the by the "NFIT DSM Example" document [1], but this scheme is extensible to future command sets. Note, nd_ioctl() and the backing ->ndctl() implementation are defined in a subsequent patch. This is simply the initial registrations and sysfs attributes. [1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf Cc: Neil Brown <neilb@suse.de> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: <linux-acpi@vger.kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NChristoph Hellwig <hch@lst.de> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
A struct nvdimm_bus is the anchor device for registering nvdimm resources and interfaces, for example, a character control device, nvdimm devices, and I/O region devices. The ACPI NFIT (NVDIMM Firmware Interface Table) is one possible platform description for such non-volatile memory resources in a system. The nfit.ko driver attaches to the "ACPI0012" device that indicates the presence of the NFIT and parses the table to register a struct nvdimm_bus instance. Cc: <linux-acpi@vger.kernel.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NJeff Moyer <jmoyer@redhat.com> Acked-by: NChristoph Hellwig <hch@lst.de> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 28 5月, 2015 1 次提交
-
-
由 Dan Williams 提交于
ACPI 6.0 formalizes e820-type-7 and efi-type-14 as persistent memory. Mark it "reserved" and allow it to be claimed by a persistent memory device driver. This definition is in addition to the Linux kernel's existing type-12 definition that was recently added in support of shipping platforms with NVDIMM support that predate ACPI 6.0 (which now classifies type-12 as OEM reserved). Note, /proc/iomem can be consulted for differentiating legacy "Persistent Memory (legacy)" E820_PRAM vs standard "Persistent Memory" E820_PMEM. Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jens Axboe <axboe@fb.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: NJeff Moyer <jmoyer@redhat.com> Acked-by: NAndy Lutomirski <luto@amacapital.net> Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Acked-by: NChristoph Hellwig <hch@lst.de> Tested-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 26 5月, 2015 2 次提交
-
-
由 Bob Moore 提交于
ACPICA commit 60052949ba2aa7377106870da69b237193d10dc1 Error in transcription from the ACPI spec. Link: https://github.com/acpica/acpica/commit/60052949Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
ACPICA commit 83727bed8f715685a63a9f668e73c60496a06054 Add original UUIDs/GUIDs to the acuuid.h file. Cleanup acpihelp output for UUIDs/GUIDs. Link: https://github.com/acpica/acpica/commit/83727bedSigned-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 22 5月, 2015 13 次提交
-
-
由 Bob Moore 提交于
ACPICA commit ed4de2e8b0a5dd6fc17773a055590bff0e995588 Version 20150515. Link: https://github.com/acpica/acpica/commit/ed4de2e8Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
ACPICA commit e4e17ca361373e9b81494bb4ca697a12cef3cba6 NVDIMM Firmware Interface Table. Link: https://github.com/acpica/acpica/commit/e4e17ca3Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
ACPICA commit d6d003556c6fc22e067d5d511577128a661266c3 -t option displays all ACPI tables. Link: https://github.com/acpica/acpica/commit/d6d00355Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
ACPICA commit 403b8b0023fd7549b2f9bf818fcc1ba481047b69 If non-AML files are used with the -e option, the disassembler can fault. The fix is to ensure that all -e files are either SSDTs or a DSDT. ACPICA BZ 1158. Link: https://github.com/acpica/acpica/commit/403b8b00 Reference: https://bugs.acpica.org/show_bug.cgi?id=1158Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
ACPICA commit b02b754a2b7afcd0384cb3b31f29eb1be028fe90 This patch adds support for DRTM (Dynamic Root of Trust for Measurement table) in iasl. Lv Zheng. Link: https://github.com/acpica/acpica/commit/b02b754aSigned-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
ACPICA commit 5de82757aef5d6163e37064033aacbce193abbca This patch adds support for IORT (IO Remapping Table) in iasl. Note that some field names are modified to shrink their length or the decompiled IORT ASL will contain fields with ugly ":" alignment. The IORT contains field definitions around "Memory Access Properties". This patch also adds support to encode/decode it using inline table. This patch doesn't add inline table support for the SMMU interrupt fields due to a limitation in current ACPICA data table support. Lv Zheng. Link: https://github.com/acpica/acpica/commit/5de82757Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
ACPICA commit 5de82757aef5d6163e37064033aacbce193abbca Using a minus number with ACPI_ADD_PTR() will cause compiler warnings, such warnings cannot be eliminated by force casting an unsigned value to a signed value. This patch thus introduces ACPI_SUB_PTR() to be used with minus numbers. Lv Zheng. Link: https://github.com/acpica/acpica/commit/5de82757Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
ACPICA commit 02cbb41232bccf7a91967140cab95d5f48291f21 New subtable type. Some additions to existing subtables. Link: https://github.com/acpica/acpica/commit/02cbb412Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
ACPICA commit e4f0b73c107680841d7dd01cc04ec108df6580bd There is code in acpi_hw_build_pci_list() destructing returned object (return_list_head) before touching it while the allocated new object (list_head) is not tracked correctly to be destructed on the error case, which is detected as unsecure code by the "Coverity" tool. This patch fixes this issue by always intializing the returned object in acpi_hw_build_pci_list() so that the caller of acpi_hw_build_pci_list() needn't initialize it and always using the returned object to track the new allocated objects. Lv Zheng. Link: https://github.com/acpica/acpica/commit/e4f0b73c Link: https://jira01.devtools.intel.com/browse/LCK-2143Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
ACPICA commit 29d03840cbab435e8ea82e9339ff9d84535c647d This patch fixes a resource leak issue in acpi_ds_auto_serialize_method(). It is reported by the "Coverity" tool as unsecure code. Lv Zheng. Link: https://github.com/acpica/acpica/commit/29d03840 Link: https://jira01.devtools.intel.com/browse/LCK-2142Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
ACPICA commit d527908bb33a3ed515cfb349cbec57121deafcc8 Second subtable type was removed from the July 2014 LPIT document. Link: https://github.com/acpica/acpica/commit/d527908bSigned-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
ACPICA commit 72b0b6741990f619f6aaa915302836b7cbb41ac4 One new 64-bit field at the end of the table. FADT version is now 6. Link: https://github.com/acpica/acpica/commit/72b0b674Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
ACPICA commit a6ccb4033b49f7aa33a17ddc41dd69d57e799fbd Windows Platform Binary Table. Link: https://github.com/acpica/acpica/commit/a6ccb403Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-