- 02 7月, 2005 10 次提交
-
-
由 Andy Whitcroft 提交于
It seems that X86 architectures in general need the setup-bus.o not just those with HOTPLUG. This avoids the following error on X86_NUMAQ and x86_64: arch/i386/pci/built-in.o(.init.text+0x15a6): In function `pcibios_init': : undefined reference to `pci_assign_unassigned_resources' Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 John W. Linville 提交于
The buffer arguments have been removed from pci_{save,restore}_state. The comment blocks for those functions should reflect that. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hannes Reinecke 提交于
the pci core sends out a hotplug event variable MODALIAS with a trailing newline. This is inconsistent with all other event variables and breaks some hotplug tools. This patch removes the said newline. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 long 提交于
This patch, is based on kernel 2.6.12, provides a fix for PCIe port bus driver suspend/resume. Signed-off-by: NT. Long Nguyen <tom.l.nguyen@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
One more Asus motherboard requiring the SMBus quirk (P4B-LX). Original patch from Salah Coronya. Signed-off-by: NSalah Coronya <salahx@yahoo.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
The dynamic pci id logic has been bothering me for a while, and now that I started to look into how to move some of this to the driver core, I thought it was time to clean it all up. It ends up making the code smaller, and easier to follow, and fixes a few bugs at the same time (dynamic ids were not being matched everywhere, and so could be missed on some call paths for new devices, semaphore not needed to be grabbed when adding a new id and calling the driver core, etc.) I also renamed the function pci_match_device() to pci_match_id() as that's what it really does. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ivan Kokshaysky 提交于
- Add sanity check for io[port,mem]_resource in setup-bus.c. These resources look like "free" as they have no parents, but obviously we must not touch them. - In i386.c:pci_allocate_bus_resources(), if a bridge resource cannot be allocated for some reason, then clear its flags. This prevents any child allocations in this range, so the setup-bus code will work with a clean resource sub-tree. - i386.c:pcibios_enable_resources() doesn't enable bridges, as it checks only resources 0-5, which looks like a clear bug to me. I suspect it might break hotplug as well in some cases. From: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ivan Kokshaysky 提交于
With the number of PCI bus resources increased to 8, we can handle the subtractive decode PCI-PCI bridge like a normal bridge, taking into account standard PCI-PCI bridge windows (resources 0-2). This helps to avoid problems with peer-to-peer DMA behind such bridges, poor performance for MMIO ranges outside bridge windows and prefetchable vs. non-prefetchable memory issues. To reflect the fact that such bridges do forward all addresses to the secondary bus (transparency), remaining bus resources 3-7 are linked to resources 0-4 of the primary bus. These resources will be used as fallback by resource management code if allocation from standard bridge windows fails for some reason. Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 rajesh.shah@intel.com 提交于
This patch increases the number of resource pointers in the pci_bus structure. This is needed to store >4 resource ranges for host bridges and transparent PCI bridges. With this change, all PCI buses will have more resource pointers, but most PCI buses will only use the first 3 or 4, the remaining being NULL. The PCI core already deals with this correctly. Signed-off-by: NRajesh Shah <rajesh.shah@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
When the cardbus bridge is behind another bridge change the routing in the parent bridge for new cards. This fixes Cardbus on various AMD64 laptops. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 01 7月, 2005 10 次提交
-
-
由 Andrew Morton 提交于
Fixup for the recent slab leak fix Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ivan Kokshaysky 提交于
As usual, the reason of this breakage is quite silly: in do_entIF, we are checking for PS == 0 to see whether it was a kernel BUG() or userspace trap. It works, unless BUG() happens in interrupt - PS is not 0 in kernel mode due to non-zero IPL, and the things get messed up horribly then. In this particular case it was BUG_ON(!irqs_disabled()) triggered in run_posix_cpu_timers(), so we ended up shooting "current" with the bursts of one SIGTRAP and three SIGILLs on every timer tick. ;-)
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas This patch calculates the AFS partition length by expanding the image length information to the nearest erase block boundary. This eliminates the problems with JFFS2 erasing the footer. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
If CONFIG_SERIAL_8250_NR_UARTS is smaller than the array size in asm/serial.h, we trampled on memory which wasn't ours. Take our big boots away by limiting the number of ports initialised to the smaller of ...NR_UARTS and the array size. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas This patch fixes the V bit setting for the ARM1020x processors. At reset, this bit is automatically set to the value of the HIVECSINIT input signal which just happened to be 1 but it is not mandatory. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas The new EABI gcc adds -mthumb-interwork by default, even if -mabi=apcs-gnu is passed. This causes a warning for every compiled C file when -march=armv4 is used. The patch adds -mno-thumb-interwork if the option is supported. This is also useful since we don't need any ARM/Thumb interworking in the kernel Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas This patch fixes a broken comment in the proc-arm1020.S file which prevents the file compilation Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 30 6月, 2005 20 次提交
-
-
由 Andrew Morton 提交于
Fix a use-uninitialised bug. Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pekka Enberg 提交于
This patch addresses the following minor issues: - Typo in printk - Redundant casts - Use C99 struct initializers instead of memset - Parenthesis around return value - Use inline instead of __inline__ Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pekka Enberg 提交于
This patch removes 2.4 compatability header from freevxfs. Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pekka Enberg 提交于
- fix a buffer_head leak in vxfs_getfsh() - s/SLAB_KERNEL/GFP_KERNEL/ - check sb_bread() return value - drop pointless buffer-mapped() test. Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jay Lan 提交于
On system boot up, there was an failure reported to boot.msg: <5>Trying to move old root to /initrd ... failed According to initrd(4) man page, step #7 of BOOT-UP OPERATION is described as below: 7. If the normal root file has directory /initrd, device /dev/ram0 is moved from / to /initrd. Otherwise if directory /initrd does not exist device /dev/ram0 is unmounted. We got service calls from customers concerning about this failure message at boot time. Many systems do not have /initrd and thus the message can be changed in the case of non-existing /initrd so that it does not sound like a failure of the system. Signed-off-by: NJay Lan <jlan@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
udf_find_entry can never be called with a NULL argument, so we shouldn't check for it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pekka J Enberg 提交于
This patch plugs a slab cache leak in fat module initialization. Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Acked-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Zankel 提交于
Removed dead code in arch/xtensa/kernel/pci.c and use the pci_name() macro. Fixed an error in the delay asm macro: '1' is an invalid immediate value. Signed-off-by: NChris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Zankel 提交于
Removed an unnecessary local copy of zlib (sorry for the add'l traffic). Fixed 'O=' support (thanks to Jan Dittmer for pointing it out). Some minor clean-ups in the make files. Signed-off-by: NChris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Zankel 提交于
Added 'mm/Kconfig' to the xtensa Kconfig file to get a flat memory layout. Fixed a typo in one of the help texts (thanks Geert for pointing it out) Signed-off-by: NChris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Zankel 提交于
I noticed this because I was doing some more ipc cleanups and I did the original errno and ipc cleanups for other architectures, so it stuck out. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NChris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
xtensa should use valid_signal() instead of testing _NSIG directly like everyone else. Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Introduce proper declarations for i8253_lock and i8259A_lock. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kumar Gala 提交于
Editor snafu in which the call to ppc_sys_get_pdata got inside the if check instead of before it. Oops. Signed-off-by: NKumar Gala <kumar.gala@freescale.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric Paris 提交于
Currently selinux_sb_copy_data requires an entire page be allocated to *orig when the function is called. This "requirement" is based on the fact that we call copy_page(in_save, nosec_save) and in_save = orig when the data is not FS_BINARY_MOUNTDATA. This means that if a caller were to call do_kern_mount with only about 10 bytes of options, they would get passed here and then we would corrupt PAGE_SIZE - 10 bytes of memory (with all zeros.) Currently it appears all in kernel FS's use one page of data so this has not been a problem. An out of kernel FS did just what is described above and it would almost always panic shortly after they tried to mount. From looking else where in the kernel it is obvious that this string of data must always be null terminated. (See example in do_mount where it always zeros the last byte.) Thus I suggest we use strcpy in place of copy_page. In this way we make sure the amount we copy is always less than or equal to the amount we received and since do_mount is zeroing the last byte this should be safe for all. Signed-off-by: NEric Paris <eparis@parisplace.org> Cc: Stephen Smalley <sds@epoch.ncsc.mil> Acked-by: NJames Morris <jmorris@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
In fixing the /proc/misc problem that was reported last week where the tpm module name was being obfuscated in /proc/misc I introduced a bug in the module unloading code. This patch fixes the problem. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Hering 提交于
CONFIG_KEXEC=y doesnt work: arch/ppc/kernel/relocate_kernel.S:37: Error: unsupported relocation against SRR1 arch/ppc/kernel/relocate_kernel.S:39: Error: unsupported relocation against SRR0 Signed-off-by: NOlaf Hering <olh@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Heiko Carstens 提交于
Commit 4866cde0 requires finish_arch_switch to have only one parameter instead of two. Also fix another compile error (double declaration of account_system_vtime) if CONFIG_VIRT_CPU_ACCOUNTING is not defined. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
As the information is now exported via sysfs, there's no need for an userspace tool any longer. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>