Add missing newline to warning message to avoid annoying
wrapping problems during kernel boot like this one:

   omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0).
   omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0).Power Management for TI OMAP4.
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NKevin Hilman <khilman@ti.com>

As the plat and mach includes need to disappear for single zImage work,
we need to remove plat/hardware.h.

Do this by splitting plat/hardware.h into omap1 and omap2+ specific files.

The old plat/hardware.h already has omap1 only defines, so it gets moved
to mach/hardware.h for omap1. For omap2+, we use the local soc.h
that for now just includes the related SoC headers to keep this patch more
readable.

Note that the local soc.h still includes plat/cpu.h that can be dealt
with in later patches. Let's also include plat/serial.h from common.h for
all the board-*.c files. This allows making the include files local later
on without patching these files again.

Note that only minimal changes are done in this patch for the
drivers/watchdog/omap_wdt.c driver to keep things compiling. Further
patches are needed to eventually remove cpu_is_omap usage in the drivers.

Also only minimal changes are done to sound/soc/omap/* to remove the
unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's
no need to include omap44xx.h.

While at it, also sort some of the includes in the standard way.

Cc: linux-watchdog@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Cc: Liam Girdwood <lrg@ti.com>
Acked-by: NWim Van Sebroeck <wim@iguana.be>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Find and unwrap wrapped strings in the style:

	pr_debug("clockdomain: hardware cannot set/clear wake up of "
		 "%s when %s wakes up\n", clkdm1->name, clkdm2->name);

Keeping these strings contiguous seems to be the current Linux kernel
policy.

The offending lines were found with the following command:

    pcregrep -rnM '"\s*$\s*"' arch/arm/*omap*

While here, some messages have been clarified, some pr_warning(
... calls have been converted to pr_warn( ..., and some printk(KERN_*
... have been converted to pr_*.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Found few more with randconfig generated .configs:

In file included from arch/arm/mach-omap2/prm-regbits-34xx.h:17,
                 from arch/arm/mach-omap2/vc.c:18:
arch/arm/mach-omap2/prm2xxx_3xxx.h: In function ‘omap2_prm_read_mod_reg’:
arch/arm/mach-omap2/prm2xxx_3xxx.h:239: error: implicit declaration of function ‘WARN’

In file included from arch/arm/mach-omap2/powerdomain44xx.c:22:
arch/arm/mach-omap2/prm2xxx_3xxx.h: In function ‘omap2_prm_read_mod_reg’:
arch/arm/mach-omap2/prm2xxx_3xxx.h:239: error: implicit declaration of function ‘WARN’

This is because omap2_prm functions are currently just stubs for
omap4 only builds.
Signed-off-by: NTony Lindgren <tony@atomide.com>

On my OMAP4 platform, I'm getting this error message repeated several
times at boot:

omap_vc_i2c_init: I2C config for all channels must match.
omap_vc_i2c_init: I2C config for all channels must match.

This doesn't help identify what the problem is.  Fix this message to
be more informative:

omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0).
omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0).

This allows us to identify which voltage domains have a problem, and
what the I2C configuration state (a boolean, i2c_high_speed) setting
being used actually is.

From this we find that omap4_core_pmic has i2c_high_speed false, but
omap4_iva_pmic and omap4_mpu_pmic both have it set true.
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

While testing on my OMAP3430 platform, this error message was emitted:

omap_vc_init_channel: PMIC info requried to configure vc forvdd_core not populated.Hence cannot initialize vc

Trying to find this message was difficult because it was wrapped across
several lines.  It also mis-spells "required", doesn't read very well,
and has spaces lacking.  Let's replace it with a more concise:

omap_vc_init_channel: No PMIC info for vdd_core

While we're here, fix a simple spelling error in a comment.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Starting with OMAP5, the following registers are per-channel and not
common to a all VC channels:

 - SMPS I2C slave address
 - SMPS voltage register address offset
 - SMPS cmd/value register address offset
 - VC channel configuration register

Move these from the channel-common struct into the per-channel struct
to support OMAP5.
Signed-off-by: NKevin Hilman <khilman@ti.com>

Currently, the nominal voltage is updated in the VC post-scale function
which is common to both scaling methods.  However, this has readabiliy
problems as this update is not where it might be expected.  Instead, move
the updated into voltdm_scale() upon a successful return of voltdm->scale()
Signed-off-by: NKevin Hilman <khilman@ti.com>

Track current nominal voltage as part of struct voltagedomain instead
of omap_vdd_info, which will soon be removed.

Also renames field from curr_volt to nominal_volt.

No functional changes.
Signed-off-by: NKevin Hilman <khilman@ti.com>

Create new helper function in VP layer for updating VP error gain.
Currently used during pre-scale for VP force update and VC bypass.

TODO: determine if this can be removed from the pre-scale path and
moved to VP enable path.
Signed-off-by: NKevin Hilman <khilman@ti.com>

In struct omap_vp_common, the shift value can be derived from the mask
value by using __ffs(), so remove the shift value for the various
VPCONFIG bitfields, and use __ffs() in the code for the shift value.

While here, rename field names in kerneldoc comment to match actual
field names in structure.  Also, cleanup indendentaion for other VP
register accesses in omap_vp_init().

No functional changes.
Signed-off-by: NKevin Hilman <khilman@ti.com>

- move VP instance struct from vdd_info into struct voltage domain
- remove _data suffix from structure name
- rename vp_ prefix from vp_common field: accesses are now vp->common
- move vp_enabled bool from vdd_info into VP instance
- remove remaining references to omap_vdd_info

No functional changes.
Signed-off-by: NKevin Hilman <khilman@ti.com>

Instead of reading current vsel value from the VP's voltage register,
just use current nominal voltage translated into vsel via the PMIC.

Doing this allows VC bypass scaling to work even without a VP configured.
Signed-off-by: NKevin Hilman <khilman@ti.com>

On OMAP3+, all VC channels have the the same bitfield ordering for all
VC channels, except the OMAP4 MPU channel.  This appears to be a freak
accident as all other VC channel (including OMAP5) have the standard
configuration.  Handle the mutant case by adding a per-channel flag
to signal the deformity and handle it during VC init.

Special thanks to Nishanth Menon <nm@ti.com> for finding this problem
and for proposing the initial solution.

Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: NKevin Hilman <khilman@ti.com>

Remove hard-coded I2C configuration in favor of settings that can be
configured from PMIC-specific values.  Currently only high-speed mode
and the master-code value are supported, since they were the only
fields currently used, but extending this is now trivial.

Thanks to Nishanth Menon <nm@ti.com> for reporting/fixing a sparse
problem and making omap_vc_i2c_init() static, as well as finding and
fixing a problem with the shift/mask of mcode.
Signed-off-by: NKevin Hilman <khilman@ti.com>

Move structure containing PMIC configurable settings into struct
voltagedomain.  In the process, rename from omap_volt_pmic_info to
omap_voltdm_pmic (_info suffix is not helpful.)

No functional changes.
Signed-off-by: NKevin Hilman <khilman@ti.com>

VC channel configuration is programmed based on settings coming from
the PMIC configuration.

Currently, the VC channel to PMIC mapping is a simple one-to-one
mapping.  Whenever a VC channel parameter is configured (i2c slave
addres, PMIC register address, on/ret/off command), the corresponding
bits are enabled in the VC channel configuration register.

If necessary, the programmability of channel configuration settings
could be extended to board/PMIC files, however, because this patch
changes the channel configuration to be programmed based on existing
values from the PMIC settings, it may not be required.

Also note that starting with OMAP4, where there are more than 2
channels, one channel is identified as the "default" channel.  When
any of the bits in the channel config for the other channels are zero,
it means to use the default channel.  The OMAP4 TRM (at least through
NDA version Q) is wrong in describing which is the default channel.
The default channel on OMAP4 is MPU, not CORE as decribed in the TRM.
Signed-off-by: NKevin Hilman <khilman@ti.com>

Configuring the on/onlp/ret/off command values is common to OMAP3 & 4.
Move from OMAP3-only init into common VC init.
Signed-off-by: NKevin Hilman <khilman@ti.com>

- add setup_time field to struct omap_vc_channel (init'd from PMIC data)
- use VC/VP register access helper for read/modify/write
- move VFSM structure from omap_vdd_info into struct voltagedomain
- remove redunant _data suffix from VFSM structures and variables
- remove voltsetup_shift, use ffs() on the mask value to find the shift
Signed-off-by: NKevin Hilman <khilman@ti.com>

The PMIC configurable variables should be isolated to VC initialization.
The rest of the VC functions (like VC bypass) should use the i2c slave address
and voltage register address fields from struct omap_vc_channel.
Signed-off-by: NKevin Hilman <khilman@ti.com>

- support both voltage register address and command register address
  for each VC channel
- add fields for voltage register address (volra) and command register
  address (cmdra) to struct omap_vc_channel
- use VC/VP register access read/modify/write helper
- remove volra_shift field (use __ffs(mask) for shift value)
- I2C addresses 10-bit, change size to u16
Signed-off-by: NKevin Hilman <khilman@ti.com>

- Add an i2c_slave_address field to the omap_vc_channel
- use VC/VP read/modify/write helper instead of open-coding
- remove smps_sa_shift, use __ffs(mask) for shift value
- I2C addresses 10-bit, change size to u16

Special thanks to Shweta Gulati <shweta.gulati@ti.com> for suggesting
the use of __ffs(x) instead of ffs(x) - 1.
Signed-off-by: NKevin Hilman <khilman@ti.com>

Convert VC/VP register access to use PRM VC/VP accessor functions.  In
the process, move the read/write function pointers from vdd_info into
struct voltagedomain.

No functional changes.

Additional cleanup:
- remove prm_mod field from  VC/VP data structures, the PRM register
  access functions know which PRM module to use.
Signed-off-by: NKevin Hilman <khilman@ti.com>

The VC layer can support PMICs with separate voltage and command
registers by putting the different registers in the PRM_VC_SMPS_VOL_RA
and PRCM_VC_SMPS_CMD_RA registers respectively.

The PMIC data must supply at least a voltage register address
(volt_reg_addr).  The command register address (cmd_reg_addr) is
optional.  If the PMIC data does not supply a separate command
register address, the VC will use the voltage register address for both.
Signed-off-by: NKevin Hilman <khilman@ti.com>

Move the VC instance struct from omap_vdd_info into struct voltagedomain.
While moving, perform some misc. renames for readability.

No functional changes.

Summary of renames:
- rename omap_vc_instance to omap_vc_channel, since there is only
  one instance of the VC IP and this actually represents channels
  using TRM terminology.
- rename 'vc_common' field of VC channel which led to:
  s/vc->vc_common/vc->common/
- remove redundant '_data' suffix
- OMAP3: vc1 --> vc_mpu, vc2 --> vc_core
- omap_vc_bypass_scale_voltage() -> omap_vc_bypass_scale()
Signed-off-by: NKevin Hilman <khilman@ti.com>

merge

As part of the voltage layer cleanup, split out VC specific code into
a dedicated VC layer.  This patch primarily just moves VC code from
voltage.c into vc.c, and adds prototypes to vc.h.

No functional changes.

For readability, each function was given a local 'vc' pointer:

    struct omap_vc_instance_data *vc = voltdm->vdd->vc_data;

and a global replace of s/vdd->vc_data/vc/ was done.

Also vc_init was renamed to vc_init_channel to reflect that this is
per-VC channel initializtion.
Signed-off-by: NKevin Hilman <khilman@ti.com>