Atm, the power well IDs are defined in separate platform specific enums,
which isn't ideal for the following reasons:
- the IDs are used by helpers like lookup_power_well() in a platform
  independent way
- the always-on power well is used by multiple platforms and so needs
  now separate IDs, although these IDs refer to the same thing

To make things more consistent use a single enum instead of the two
separate ones, listing the IDs per platform (or set of very similar
platforms like all GEN9/10). Replace the separate always-on power
well IDs with a single ID.

While at it also add a note clarifying the distinction between regular
power wells that follow a common programming pattern and custom ones
that are programmed in some other way. The IDs for regular power wells
need to stay fixed, since they also define the request and state HW flag
positions in their corresponding power well control register(s).

v2:
- Add comment about id to req,status bit mapping to the enum. (Rodrigo)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170711204236.5618-1-imre.deak@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The power well IDs are used for lookup, so they must be unique on a
given platform; ensure this on CHV. This didn't cause an actual problem
since we didn't need to look up power wells which happened to share an
ID.

Mark this new power well as custom, since its programming pattern
doesn't follow that of the rest of VLV/CHV power wells.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1499352040-8819-2-git-send-email-imre.deak@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is a follow-up after enabling DC states with
commit: "drm/i915/DMC/CNL: Load DMC on CNL".

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499373908-26761-1-git-send-email-rodrigo.vivi@intel.com

The comments match an earlier version of the patch, fix them to match
the current state.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-6-git-send-email-imre.deak@intel.com

So far in an attempt to make sure all power wells get disabled during
display uninitialization the driver removed any secondary request bits
(BIOS, KVMR, DEBUG) that were set for a given power well. The known
source for these requests was DMC's request on power well 1 and the misc
IO power well. Since DMC is inactive (DC states are disabled) at the
point we disable these power wells, there shouldn't be any reason to
leave them on. However there are two problems with the above
assumption: Bspec requires that the misc IO power well stays enabled
(without providing a reason) and there can be KVMR requests that we
can't remove anyway (the KVMR request register is R/O). Atm, a KVMR
request can trigger a timeout WARN when trying to disable power wells.

To make the code aligned to Bspec and to get rid of the KVMR WARN, don't
try to remove the secondary requests, only detect them and stop polling
for the power well disabled state when any one is set.

Also add a comment about the timeout values required by Bspec when
enabling power wells and the fact that waiting for them to get disabled
is not required by Bspec.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98564Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-5-git-send-email-imre.deak@intel.com

What we want to assert based on the conditions required by Bspec is that
power well 2 is disabled, so no need to check for other power wells.
In addition we can only check if the driver's request is removed, the
actual state depends on whether the other request bits are set or not
(BIOS, KVMR, DEBUG). So check only the driver's request bit.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-4-git-send-email-imre.deak@intel.com

Bspec requires leaving the misc IO power well enabled during display
uninit, so align the code accordingly.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-3-git-send-email-imre.deak@intel.com

Bspec requires a 10 us delay after disabling power well 1 and - if not
toggled on-demand - the AUX IO power wells during display uninit.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-2-git-send-email-imre.deak@intel.com

830 more or less requires both pipes and DPLLs to remain on as long
as either pipe is needed. However, when neither pipe is actually needed,
we can save a bit of power by turning everything off. To do that we add
a new "power well" that turns both pipes and DPLLs on and off in the
right order. Seems to save ~50mW on my Fujitsu-Siemens Lifebook S6010.

This also avoids having to abuse the load detection to force pipe A on
at init time. That was never very robust, and it only worked for one
pipe, whereas 830 really needs both pipes enabled. As a bonus the 830
pipe quirk is now a bit more isolated from the rest of the mode setting
infrastructure, which should mean that it's much less likely someone
will accidentally break it in the future. The extra cost is of course
slight code duplication, but that seems like a worthwile tradeoff here.

v2; s/BIT/BIT_ULL/
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170601143619.27840-5-ville.syrjala@linux.intel.comAcked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Implement the CNL display init/uninit sequence as outlined in Bspec.

Quite similar to SKL/BXT. The main complicaiton is probably the extra
procmon setup we must do based on the process/voltage information we
can read out from some register.

v2: s/skl_dbuf/gen9_dbuf/ to follow upstream
    bxt needed a cdclk sanitize step, so let's add it for cnl too
v3: s/CHICKEN_MISC_1/CHICKEN_MISC_2/ (Ander)
v4: Rebased by Rodrigo after Ville's cdclk rework
v5: Removed unecessary Aux IO forced enable/disable, Fix DW10 setup
    Fix procpon Mask. (Credits-to Paulo and Clint)
    Remove A0 workaround.
v6: Rebased on top of recent code (Rodrigo).
v7: Respect the order of sanitize_ after set_
    (Done by Rodrigo, Requested by Ville)
v8: Commit message updated to matvh v5 changes besides
    Remove unused DW8 and an extra blank line. (all noticed
    by Imre).
v9: Remove __attribute__((unused)) added on latest version
    of drm/i915/cnl: Implement .set_cdclk() for CNL.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-3-git-send-email-rodrigo.vivi@intel.com

The workaround added in
commit c6782b76 ("drm/i915/gen9: Reset secondary power well
equests left on by DMC/KVMR")
needs to be applied on Cannonlake as well.

So let's assume any platform using this power well setup
will also need and let's just go ahead and remove if condition.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1496781040-20888-11-git-send-email-rodrigo.vivi@intel.com

CNL power wells are very similar to SKL, with the exception that the
misc IO well has been split into separate AUX IO wells.

Not sure if DMC is supposed to manage the AUX wells for us or not.
Let's assume so for now.

v2: DDI A power well wants DDI A domains, not DDI B domains
v3: s/BIT/BIT_ULL and add proper Aux IO domains. (Rodrigo)
v4: Remove PW_DDI_E. Not supported on Current CNL SKUs. (Rodrigo).
v5: Removed DDI_E_IO_DOMAINS and moved PORT_DDI_E_IO to DDI_A_IO
    for the same reasons as v4 when we found out that current CNL
    SKUs don't have the full port E split.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1496781040-20888-10-git-send-email-rodrigo.vivi@intel.com

We don't expect the core runtime PM get helpers to return any error, so
add a WARN for this. Also print the return value for all the callsites
to help debugging.

v2:
- Don't call pm_runtime_get_sync() as part of initing locals. (Chris)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1490693935-12638-1-git-send-email-imre.deak@intel.com

According to bspec, the DDI IO power domains should be enabled after
enabling the DPLL and mapping it to the DDI. The current order doesn't
seem to create problems with Skylake and Kabylake, but causes enable
timeouts in Geminilake.

v2: Rebase.
  - Take power domain references before sanitizing encoders. (Imre)
  - Add comment to get_encoder_power_domains() defition. (Ander)

v3: Don't put the domain if called with HSW/BDW's analog encoder. (CI)

v4: Put IO power domain before unmapping DPLL. (Imre)
  - Change return type of intel_ddi_get_power_domains() to u64. (Imre)

Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> # v1
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224141959.5955-1-ander.conselvan.de.oliveira@intel.com

In Geminilake, the DDI IO power domains can't be enabled before a DPLL
is running and mapped to the appropriate DDI. At least on Geminilake,
attempting to enable those during init will lead to a timeout.

The failure to enable the power domain also causes issues with the state
verifier during resume from suspend. After all the init power domains
are enabled, the call to intel_power_domains_sync_hw() from the resume
path will cause the hw_enabled field on the respective power wells to be
false while the usage count remains above zero. Further attempts to
enable the power domain caused by a modeset will simply update the usage
count without doing anything else. When the state verifier attempts to
read the state of a DDI encoder, intel_display_power_get_if_enabled()
returns false, leading to the following WARN:

WARNING: CPU: 3 PID: 1743 at drivers/gpu/drm/i915/intel_display.c:7001 verify_connector_state.isra.80+0x26c/0x2b0 [i915]
attached crtc is active, but connector isn't
Modules linked in: i915(E) tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_broute bridge stp llc ebtable_nat ip6table_mangle ip6table_security ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_raw iptable_mangle iptable_security iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables x86_pkg_temp_thermal coretemp kvm_intel kvm i2c_algo_bit drm_kms_helper irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drm shpchp tpm_tis tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc crc32c_intel serio_raw [last unloaded: i915]
CPU: 3 PID: 1743 Comm: kworker/u8:22 Tainted: G        W   E   4.10.0-rc3ander+ #300
Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0023.B40.1611302145 11/30/2016
Workqueue: events_unbound async_run_entry_fn
Call Trace:
 dump_stack+0x86/0xc3
 __warn+0xcb/0xf0
 warn_slowpath_fmt+0x5f/0x80
 verify_connector_state.isra.80+0x26c/0x2b0 [i915]
 intel_atomic_commit_tail+0x520/0x1000 [i915]
 ? remove_wait_queue+0x70/0x70
 intel_atomic_commit+0x3f8/0x520 [i915]
 ? intel_runtime_pm_put+0x6e/0xa0 [i915]
 drm_atomic_commit+0x4b/0x50 [drm]
 __intel_display_resume+0x72/0xc0 [i915]
 intel_display_resume+0x107/0x150 [i915]
 i915_drm_resume+0xe0/0x180 [i915]
 i915_pm_restore+0x1e/0x30 [i915]
 i915_pm_resume+0xe/0x10 [i915]
 pci_pm_resume+0x64/0xa0
 dpm_run_callback+0xa1/0x2a0
 ? pci_pm_thaw+0x90/0x90
 device_resume+0xe3/0x200
 async_resume+0x1d/0x50
 async_run_entry_fn+0x39/0x170
 process_one_work+0x212/0x670
 ? process_one_work+0x197/0x670
 worker_thread+0x4e/0x490
 kthread+0x101/0x140
 ? process_one_work+0x670/0x670
 ? kthread_create_on_node+0x60/0x60
 ret_from_fork+0x2a/0x40

Cc: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170222063431.10060-6-ander.conselvan.de.oliveira@intel.com

Verify that the refcount of all power wells match their HW enabled
state at the end of modeset HW state readout.

Also add documentation on how the reference count for each power well is
supposed to be acquired during initialization and HW state readout.

Suggested by Ander.

Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-6-git-send-email-imre.deak@intel.com

Atm, power wells that BIOS has enabled, but which we don't explicitly
enable during power domain initialization would get disabled as we clear
the BIOS request bit in the given power well sync_hw hook. To prevent
this copy over any set request bits in the BIOS request register to the
driver request register and clear the BIOS request bit only afterwards.

This doesn't make a difference now, since we enable all power wells
during power domain initialization. A follow-up patchset will add power
wells for which this isn't true, so fix up the inconsistency.

Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-5-git-send-email-imre.deak@intel.com

Atm, in the power well sync_hw hook we are clearing all BIOS request
bits, not just the one corresponding to the given power well. This could
turn off an unrelated power well inadvertently if it didn't have a
request bit set in the driver request register.

This didn't cause a problem so far, since we enabled all power wells
explicitly before clearing the BIOS request register. A follow-up
patchset will add power wells that won't get enabled this way, so fix up
the inconsistency.

Note that this patch only makes the clearing of the BIOS req register
more logical. Power wells without a reference would still get disabled
by the end of power domain initialization, that is fixed by the next
patch.

v2:
- Clarify in the commit log that this patch doesn't address the case of
  power wells without a reference. (Ander)

Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-4-git-send-email-imre.deak@intel.com

So far the sync_hw hook wasn't called for power wells not belonging to
any power domain, that is the GEN9 PW1 and MISC_IO power wells. This
wasn't a problem so far since the goal of the sync_hw hook - to clear
the corresponding BIOS request bit - was guaranteed by clearing the
whole BIOS request register elsewhere. This will change with the next
patch, so fix up the inconsistency.

While at it clean up the power well iterator helpers and move them to
the rest of iterators.

v2:
- Clean up the power well iterator helpers. (Ander)
- Move the helpers to i915_drv.h.

Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-3-git-send-email-imre.deak@intel.com

Doing an explicit enable/disable in the power well sync_hw hook based on
the power well's reference count is redundant, since by the time these
hooks are called all the power wells are enabled and have a reference.
So remove the redundant toggling.

This is needed by a follow-up patchset that adds power wells which we
can't enable/disable during power domain initialization and so want to
preserve their state until modeset init time.

Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-2-git-send-email-imre.deak@intel.com

There are currently 30 power domains, which puts us pretty close to the
limit with 32 bit masks. Prepare for the future and increase the limit
to 64 bit.

v2: Rebase
v3: s/unsigned long long/u64/ (Joonas)
    Allow the 64th bit of the mask to be used. (Joonas)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170209093121.24410-1-ander.conselvan.de.oliveira@intel.com

Introduce intel_cdclk state which for now will track the cdclk
frequency, the vco frequency and the reference frequency (not sure we
want the last one, but I put it there anyway). We'll also make the
.get_cdclk() function fill out this state structure rather than
just returning the current cdclk frequency.

One immediate benefit is that calling .get_cdclk() will no longer
clobber state stored under dev_priv unless ex[plicitly told to do
so. Previously it clobbered the vco and reference clocks stored
there on some platforms.

We'll expand the use of this structure to actually precomputing the
state and whatnot later.

v2: Constify intel_cdclk_state_compare()
v3: Document intel_cdclk_state_compare()
v4: Deal with i945gm_get_cdclk()
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207183345.19763-1-ville.syrjala@linux.intel.com

Rename the .get_display_clock_speed() hook to .get_cdclk().
.get_cdclk() is more specific (which clock) and it's much
shorter.

v2: Deal with IS_GEN9_BC()
v3: Deal with i945gm_get_display_clock_speed()
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207183146.19420-1-ville.syrjala@linux.intel.com

"BIT(max) - 1" will overflow when max = 32, and GCC will complain.
We already have GENMASK for generating the mask, use it!

v2: Majestic off by one spotted (Chris)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Along with GLK it was introduced the .is_lp and IS_GEN9_LP.
So, following the same simplification standard we can
put Skylake and Kabylake under the same bucket for most
of the things.

So let's add the IS_GEN9_BC for "Big Core" (non Atom based
platforms).

The i915_drv.c was let out of this patch on purpose
because that is really a decision per platform, just like
other cases where IS_KABYLAKE is different from IS_SKYLAKE.

v2: fix conflict with IS_LP and 3 new cases for this
    big core bucket:
    - intel_ddi.c: intel_ddi_get_link_dpll
    - intel_fbc.c: find_compression_threshold
    - i915_gem_gtt.c: gtt_write_workarounds

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485196357-30599-2-git-send-email-rodrigo.vivi@intel.com

On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading
i915 at boot 1 out of every 3 boots, resulting in a non functional LCD.
Once the i915 driver has successfully loaded, the panel can be disabled /
enabled without hitting this issue.

The getting stuck is caused by vlv_init_display_clock_gating() clearing
the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from
chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled
driving the DSI LCD by the BIOS.

Clearing this bit while DSI is in use is a known issue and
intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it
as appropriate.

This commit modifies vlv_init_display_clock_gating() to leave the
DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck.

Changes in v2:
-Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and
comment

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330
Cc: stable@vger.kernel.org
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161202142904.25613-1-hdegoede@redhat.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 721d4845)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading
i915 at boot 1 out of every 3 boots, resulting in a non functional LCD.
Once the i915 driver has successfully loaded, the panel can be disabled /
enabled without hitting this issue.

The getting stuck is caused by vlv_init_display_clock_gating() clearing
the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from
chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled
driving the DSI LCD by the BIOS.

Clearing this bit while DSI is in use is a known issue and
intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it
as appropriate.

This commit modifies vlv_init_display_clock_gating() to leave the
DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck.

Changes in v2:
-Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and
comment

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330
Cc: stable@vger.kernel.org
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161202142904.25613-1-hdegoede@redhat.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

The sequence is pretty much the same as broxton, except that bspec
requires the AUX domains to be enabled. But since those can't be enabled
before the phys are initialized, we just use the same sequence as
broxton.

v2: Don't manually enable AUX domains. (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480667037-11215-9-git-send-email-ander.conselvan.de.oliveira@intel.com

Implement the DDI initsequence and add information about the different
phys in GLK.

v2: Rebase on the move of phys to be power wells.

v3: Rebase on addition of struct bxt_ddi_phy_info.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480667037-11215-4-git-send-email-ander.conselvan.de.oliveira@intel.com

Geminilake has power wells are similar to SKL, but with the misc IO well
being split into separate AUX IO wells.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480667037-11215-3-git-send-email-ander.conselvan.de.oliveira@intel.com

Geminilake is mostly backwards compatible with broxton, so change most
of the IS_BROXTON() checks to IS_GEN9_LP(). Differences between the
platforms will be implemented in follow-up patches.

v2: Don't reuse broxton's path in intel_update_max_cdclk().
    Don't set plane count as in broxton.

v3: Rebase

v4: Include the check intel_bios_is_port_hpd_inverted().
    Commit message.

v5: Leave i915_dmc_info() out; glk's csr version != bxt's. (Rodrigo)

v6: Rebase.

v7: Convert a few mode IS_BROXTON() occurances in pps, ddi, dsi and pll
    code. (Rodrigo)

v8: Squash a couple of DDI patches with more conversions. (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480667037-11215-2-git-send-email-ander.conselvan.de.oliveira@intel.com

Macro takes dev_priv and not dev.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

And a little bit of function prototype changes.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

One of the CI machines began to run into issues with the hpd poller
suddenly waking up in the midst of the late suspend phase. It looks like
this is getting caused by the fact we now deinitialize power wells in
late suspend, which means that intel_hpd_poll_init() gets called in late
suspend causing polling to get re-enabled. So, when deinitializing power
wells on valleyview we now refrain from enabling polling in the midst of
suspend.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040
Fixes: 19625e85 ("drm/i915: Enable polling when we don't have hpd")
Signed-off-by: NLyude <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Petry Latvala <petri.latvala@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477499769-1966-1-git-send-email-lyude@redhat.com
(cherry picked from commit b64b5409)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-15-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

One of the CI machines began to run into issues with the hpd poller
suddenly waking up in the midst of the late suspend phase. It looks like
this is getting caused by the fact we now deinitialize power wells in
late suspend, which means that intel_hpd_poll_init() gets called in late
suspend causing polling to get re-enabled. So, when deinitializing power
wells on valleyview we now refrain from enabling polling in the midst of
suspend.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040
Fixes: 19625e85 ("drm/i915: Enable polling when we don't have hpd")
Signed-off-by: NLyude <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Petry Latvala <petri.latvala@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477499769-1966-1-git-send-email-lyude@redhat.com

Use struct bxt_ddi_phy_info to hold information of where the Rcomp
resistor is located, instead of hard coding it in the init sequence.

Note that this moves the enabling of the phy with the Rcomp resistor out
of the power well enable code. That should be safe since
bxt_ddi_phy_init() is called while the power domains lock is held, and
that is the only way that function gets called, so there is no
possibility of a concurrent phy enable caused by a power domain get
call.

v2: Replace comment about lock with lockdep_assert_held()  (Imre)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/62d209950ad48484564f3e793cf247cf62572a39.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

The mapping from the BXT_DPIO_CMN_* power wells to their respective phys
required a detour implemented in the bxt_power_well_to_phy() function.
Instead, embed that information directly into the power_well struct, by
resurrecting the data field.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/7fe97582fa08c7340ce6a3b6b0ea3e72a73182d7.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

Calling it data seems to imply arbitrary data can be associated with the
power well. However, that field is used for look ups and expected to be
unique, so rename it.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/f3916c3c5bfa793b0fc870fd44007a3ff425194d.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

We only used the RPM sequence checking inside the lowlevel GTT
accessors, when we had to rely on callers taking the wakeref on our
behalf. Now that we take the RPM wakeref inside the GTT management
routines themselves, we can forgo the sanitycheck of the callers.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-4-chris@chris-wilson.co.uk