- 08 2月, 2017 5 次提交
-
-
由 Hugues Fruchet 提交于
Adds support of DELTA MJPEG video decoder back-end, implemented by calling JPEG_DECODER_HW0 firmware using RPMSG IPC communication layer. Acked-by: NPeter Griffin <peter.griffin@linaro.org> Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hugues Fruchet 提交于
EOS (End Of Stream) support allows user to get all the potential decoded frames remaining in decoder pipeline after having reached the end of video bitstream. To do so, user calls VIDIOC_DECODER_CMD(V4L2_DEC_CMD_STOP) which will drain the decoder and get the drained frames that are then returned to user. User is informed of EOS completion in two ways: - dequeue of an empty frame flagged to V4L2_BUF_FLAG_LAST - reception of a V4L2_EVENT_EOS event. If, unfortunately, no buffer is available on CAPTURE queue to return the empty frame, EOS is delayed till user queue one CAPTURE buffer. Acked-by: NPeter Griffin <peter.griffin@linaro.org> Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hugues Fruchet 提交于
IPC (Inter Process Communication) support for communication with DELTA coprocessor firmware using rpmsg kernel framework. Based on 4 services open/set_stream/decode/close and their associated rpmsg messages. The messages structures are duplicated on both host and firmware side and are packed (use only of 32 bits size fields in messages structures to ensure packing). Each service is synchronous; service returns only when firmware acknowledges the associated command message. Due to significant parameters size exchanged from host to copro, parameters are not inserted in rpmsg messages. Instead, parameters are stored in physical memory shared between host and coprocessor. Memory is non-cacheable, so no special operation is required to ensure memory coherency on host and on coprocessor side. Multi-instance support and re-entrance are ensured using host_hdl and copro_hdl in message header exchanged between both host and coprocessor. This avoids to manage tables on both sides to get back the running context of each instance. Acked-by: NPeter Griffin <peter.griffin@linaro.org> Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hugues Fruchet 提交于
Helper functions used by decoder back-ends to allocate physically contiguous memory required by hardware video decoder. Acked-by: NPeter Griffin <peter.griffin@linaro.org> Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hugues Fruchet 提交于
This V4L2 driver enables DELTA multi-format video decoder of STMicroelectronics STiH4xx SoC series. Acked-by: NPeter Griffin <peter.griffin@linaro.org> Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 03 2月, 2017 1 次提交
-
-
由 Pan Bian 提交于
Function bdisp_debugfs_create() returns 0 even on errors. So its caller cannot detect the errors. It may be better to return "-ENOMEM" on the exception paths. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188801Signed-off-by: NPan Bian <bianpan2016@163.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 31 1月, 2017 3 次提交
-
-
由 Mauro Carvalho Chehab 提交于
As reported by gcc: drivers/media/platform/sti/hva/hva-v4l2.c:227:6: warning: no previous prototype for 'hva_dbg_summary' [-Wmissing-prototypes] void hva_dbg_summary(struct hva_ctx *ctx) ^~~~~~~~~~~~~~~ This function is used only internally, so make it static. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Jean-Christophe Trotin 提交于
This patch creates 4 static debugfs entries to dump: - the device-related information ("st-hva/device") - the list of registered encoders ("st-hva/encoders") - the current values of the hva registers ("st-hva/regs") - the information about the last closed instance ("st-hva/last") It also creates dynamically a debugfs entry for each opened instance, ("st-hva/<instance identifier>") to dump: - the information about the frame (format, resolution) - the information about the stream (format, profile, level, resolution) - the control parameters (bitrate mode, framerate, GOP size...) - the potential (system, encoding...) errors - the performance information about the encoding (HW processing duration, average bitrate, average framerate...) Each time a running instance is closed, its context (including the debug information) is saved to feed, on demand, the last closed instance debugfs entry. Signed-off-by: NYannick Fertre <yannick.fertre@st.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NJean-Christophe Trotin <jean-christophe.trotin@st.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Jean-Christophe Trotin 提交于
This patch adds a short summary about the encoding operation at each instance closing, for debug purpose (through dev_dbg()): - information about the frame (format, resolution) - information about the stream (format, profile, level, resolution) - number of encoded frames - potential (system, encoding...) errors Signed-off-by: NYannick Fertre <yannick.fertre@st.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NJean-Christophe Trotin <jean-christophe.trotin@st.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 21 11月, 2016 1 次提交
-
-
由 Wei Yongjun 提交于
Fix to return error code -ENODEV from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Acked-by: NPatrice Chotard <patrice.chotard@st.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 18 11月, 2016 1 次提交
-
-
由 Peter Griffin 提交于
Now that CLK_PROC_STFE is defined as a critical clock in DT, we can remove the commented clk_disable_unprepare from the c8sectpfe driver. This means we now have balanced clk*enable/disable calls in the driver, but on STiH407 family the clock in reality will never actually be disabled. This is due to a HW bug where once the IP has been configured and the SLIM core is running, disabling the clock causes a unrecoverable bus lockup. Signed-off-by: NPeter Griffin <peter.griffin@linaro.org> Acked-by: NPatrice Chotard <patrice.chotard@st.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 16 11月, 2016 2 次提交
-
-
由 Colin Ian King 提交于
The second check for an error on hva->lmi_err_reg appears to be a copy-and-paste error, it should be hva->emi_err_reg instead. Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NJean-Christophe Trotin <jean-christophe.trotin@st.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Dan Carpenter 提交于
The devm_ioremap_resource() returns error pointers, never NULL. The platform_get_resource() returns NULL on error, never error pointers. The error code needs to be set, as well. The current code returns PTR_ERR(NULL) which is success. Fixes: 57b2c062 ("[media] st-hva: multi-format video encoder V4L2 driver") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NJean-Christophe Trotin <jean-christophe.trotin@st.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 25 10月, 2016 1 次提交
-
-
由 Wei Yongjun 提交于
Fix to return error code -EINVAL from the platform_get_resource() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Reviewed-by: NFabien Dessenne <fabien.dessenne@st.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 21 10月, 2016 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Due to the 80-cols restrictions, and latter due to checkpatch warnings, several strings were broken into multiple lines. This is not considered a good practice anymore, as it makes harder to grep for strings at the source code. As we're right now fixing other drivers due to KERN_CONT, we need to be able to identify what printk strings don't end with a "\n". It is a way easier to detect those if we don't break long lines. So, join those continuation lines. The patch was generated via the script below, and manually adjusted if needed. </script> use Text::Tabs; while (<>) { if ($next ne "") { $c=$_; if ($c =~ /^\s+\"(.*)/) { $c2=$1; $next =~ s/\"\n$//; $n = expand($next); $funpos = index($n, '('); $pos = index($c2, '",'); if ($funpos && $pos > 0) { $s1 = substr $c2, 0, $pos + 2; $s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2; $s2 =~ s/^\s+//; $s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne ""); print unexpand("$next$s1\n"); print unexpand("$s2\n") if ($s2 ne ""); } else { print "$next$c2\n"; } $next=""; next; } else { print $next; } $next=""; } else { if (m/\"$/) { if (!m/\\n\"$/) { $next=$_; next; } } } print $_; } </script> Acked-by: NPeter Griffin <peter.griffin@linaro.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 20 9月, 2016 2 次提交
-
-
由 Hans Verkuil 提交于
drivers/media/platform/sti/hva/hva-v4l2.c:43:22: warning: symbol 'hva_encoders' was not declared. Should it be static? drivers/media/platform/sti/hva/hva-v4l2.c:1401:24: warning: symbol 'hva_driver' was not declared. Should it be static? Make these static. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Julia Lawall 提交于
Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: NFabien Dessenne <fabien.dessenne@st.com> Reviewed-by: NJacek Anaszewski <j.anaszewski@samsung.com> Reviewed-by: NBenoit Parrot <bparrot@ti.com> [hans.verkuil@cisco.com: dropped soc_camera/rcar_vin.c patch because that driver will be removed] Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 09 9月, 2016 2 次提交
-
-
由 Jean-Christophe Trotin 提交于
This patch adds the H.264 video encoding capability in the V4L2 HVA video encoder driver for STMicroelectronics SoC (hva-h264.c). The main supported features are: - profile: baseline, main, high, stereo high - level: up to 4.2 - bitrate mode: CBR, VBR - entropy mode: CABAC, CAVLC - video aspect: 1x1 only Signed-off-by: NYannick Fertre <yannick.fertre@st.com> Signed-off-by: NJean-Christophe Trotin <jean-christophe.trotin@st.com> Acked-by: NPeter Griffin <peter.griffin@linaro.org> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Jean-Christophe Trotin 提交于
This patch adds V4L2 HVA (Hardware Video Accelerator) video encoder driver for STMicroelectronics SoC. It uses the V4L2 mem2mem framework. This patch only contains the core parts of the driver: - the V4L2 interface with the userland (hva-v4l2.c) - the hardware services (hva-hw.c) - the memory management utilities (hva-mem.c) This patch doesn't include the support of specific codec (e.g. H.264) video encoding: this support is part of subsequent patches. Signed-off-by: NYannick Fertre <yannick.fertre@st.com> Signed-off-by: NJean-Christophe Trotin <jean-christophe.trotin@st.com> Acked-by: NPeter Griffin <peter.griffin@linaro.org> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 04 8月, 2016 1 次提交
-
-
由 Krzysztof Kozlowski 提交于
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.comSigned-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NVineet Gupta <vgupta@synopsys.com> Acked-by: NRobin Murphy <robin.murphy@arm.com> Acked-by: NHans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 7月, 2016 1 次提交
-
-
由 Sudip Mukherjee 提交于
We have assigned memory while requesting the firmware but if the sanity check fails then we are not releasing the firmware. Signed-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 09 7月, 2016 2 次提交
-
-
由 Hans Verkuil 提交于
Make this a proper typed array. Drop the old allocate context code since that is no longer used. Note that the memops functions now get a struct device pointer instead of the struct device ** that was there initially (actually a void pointer to a struct containing only a struct device pointer). This code is now a lot cleaner. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
Stop using alloc_ctx and just fill in the device pointer. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NFabien Dessenne <fabien.dessenne@st.com> Acked-by: NBenoit Parrot <bparrot@ti.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 24 6月, 2016 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Those structs are used only at bdisp-hw, so they shouldn't be there in a header file that it is used elsewhere. This fixes the following Gcc 6.1 warnings: In file included from drivers/media/platform/sti/bdisp/bdisp-debug.c:11:0: drivers/media/platform/sti/bdisp/bdisp-filter.h:207:65: warning: ‘bdisp_v_spec’ defined but not used [-Wunused-const-variable=] static const struct __maybe_unused bdisp_filter_v_spec bdisp_v_spec[] = { ^~~~~~~~~ In file included from drivers/media/platform/sti/bdisp/bdisp-debug.c:11:0: drivers/media/platform/sti/bdisp/bdisp-filter.h:23:65: warning: ‘bdisp_h_spec’ defined but not used [-Wunused-const-variable=] static const struct __maybe_unused bdisp_filter_h_spec bdisp_h_spec[] = { ^~~~~~~~~ Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 09 5月, 2016 3 次提交
-
-
由 Peter Griffin 提交于
c8sectpfe driver relied on CONFIG_FW_LOADER_USER_HELPER_FALLBACK option for loading its xp70 firmware. A previous commit removed this Kconfig option, as it is apparently harmful, but did not update the driver code which relied on it. This patch reworks the firmware loading into the start_feed callback. At this point we can be sure the rootfs is present, thereby removing the depedency on CONFIG_FW_LOADER_USER_HELPER_FALLBACK. Fixes: 79f5b6ae ('[media] c8sectpfe: Remove select on CONFIG_FW_LOADER_USER_HELPER_FALLBACK') Signed-off-by: NPeter Griffin <peter.griffin@linaro.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Peter Griffin 提交于
Signed-off-by: NPeter Griffin <peter.griffin@linaro.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Peter Griffin 提交于
During the review process, a regression was intoduced in the circular buffer write pointer management. This means that wp doesn't get managed properly once the buffer becomes full. Signed-off-by: NPeter Griffin <peter.griffin@linaro.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 01 2月, 2016 1 次提交
-
-
由 Julia Lawall 提交于
The stv6110x_devctl structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 18 12月, 2015 2 次提交
-
-
由 Junghak Sung 提交于
Move timestamp from struct vb2_v4l2_buffer to struct vb2_buffer for common use, and change its type to u64 in order to handling y2038 problem. This patch also includes all device drivers' changes related to this restructuring. Signed-off-by: NJunghak Sung <jh1009.sung@samsung.com> Signed-off-by: NGeunyoung Kim <nenggun.kim@samsung.com> Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Acked-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NHans Verkuil <hansverk@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Hans Verkuil 提交于
The queue_setup callback has a void pointer that is just for V4L2 and is the pointer to the v4l2_format struct that was passed to VIDIOC_CREATE_BUFS. The idea was that drivers would use the information from that struct to buffers suitable for the requested format. After the vb2 split series this pointer is now a void pointer, which is ugly, and the reality is that all existing drivers will effectively just look at the sizeimage field of v4l2_format. To make this more generic the queue_setup callback is changed: the void pointer is dropped, instead if the *num_planes argument is 0, then use the current format size, if it is non-zero, then it contains the number of requested planes and the sizes array contains the requested sizes. If either is unsupported, then return -EINVAL, otherwise use the requested size(s). Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 19 11月, 2015 2 次提交
-
-
由 Markus Elfring 提交于
The variable "tsin" was checked three times in a loop iteration of the c8sectpfe_tuner_unregister_frontend() function. This implementation detail could be improved by the combination of the involved statements into a single if block so that this variable will be checked only once there. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Markus Elfring 提交于
The functions i2c_put_adapter() and module_put() test whether their argument is NULL and then return immediately. Thus the tests around their calls are not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 18 11月, 2015 1 次提交
-
-
由 Peter Griffin 提交于
reset-gpios is more clear than rst-gpio. This change has been done as one atomic commit but it does breaks compatability with older dtbs. Signed-off-by: NPeter Griffin <peter.griffin@linaro.org> Acked-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 23 10月, 2015 2 次提交
-
-
由 Sudip Mukherjee 提交于
The variable err was never initialized, that means we had been checking a garbage value in the for loop. Moreover if the segment is not outside the firmware file then also we have been returning the garbage. Initialize it to 0 so that on success we return the value and no need to check in the for loop also as it is initially 0 and whenever that value changes we have done a break from the loop. Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Colin Ian King 提交于
static analysis with cppcheck detected the following error: [drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1210]: (error) Uninitialized variable: ret ret is never initialised, so garbage is being returned. Instead return the error return from the call of request_firmware_nowait Signed-off-by: NColin Ian King <colin.king@canonical.com>
-
- 21 10月, 2015 2 次提交
-
-
由 Takashi Iwai 提交于
c8sectpfe driver selects CONFIG_FW_LOADER_USER_HELPER_FALLBACK by some reason, but this option is known to be harmful, leading to minutes of stalls at boot time. The option was intended for only compatibility for an old exotic system that mandates the udev interaction, and not a thing a driver selects by itself. Let's remove it. Fixes: 850a3f7d ('[media] c8sectpfe: Add Kconfig and Makefile for the driver') Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Junghak Sung 提交于
Replace struct v4l2_format * with void * to make queue_setup() for common use. And then, modify all device drivers related with this change. Signed-off-by: NJunghak Sung <jh1009.sung@samsung.com> Signed-off-by: NGeunyoung Kim <nenggun.kim@samsung.com> Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Acked-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix missing const in fimc-lite.c] Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 02 10月, 2015 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Solves those sparse warnings: drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1087:9: warning: incorrect type in argument 1 (different address spaces) drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1087:9: expected void *<noident> drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1087:9: got void [noderef] <asn:2>*<noident> drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1090:9: warning: incorrect type in argument 1 (different address spaces) drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1090:9: expected void *<noident> drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1090:9: got void [noderef] <asn:2>* Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 01 10月, 2015 1 次提交
-
-
由 Junghak Sung 提交于
Remove v4l2 stuff - v4l2_buf, v4l2_plane - from struct vb2_buffer. Add new member variables - bytesused, length, offset, userptr, fd, data_offset - to struct vb2_plane in order to cover all information of v4l2_plane. struct vb2_plane { <snip> unsigned int bytesused; unsigned int length; union { unsigned int offset; unsigned long userptr; int fd; } m; unsigned int data_offset; } Replace v4l2_buf with new member variables - index, type, memory - which are common fields for buffer management. struct vb2_buffer { <snip> unsigned int index; unsigned int type; unsigned int memory; unsigned int num_planes; struct vb2_plane planes[VIDEO_MAX_PLANES]; <snip> }; v4l2 specific fields - flags, field, timestamp, timecode, sequence - are moved to vb2_v4l2_buffer in videobuf2-v4l2.c struct vb2_v4l2_buffer { struct vb2_buffer vb2_buf; __u32 flags; __u32 field; struct timeval timestamp; struct v4l2_timecode timecode; __u32 sequence; }; Signed-off-by: NJunghak Sung <jh1009.sung@samsung.com> Signed-off-by: NGeunyoung Kim <nenggun.kim@samsung.com> Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Acked-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 04 9月, 2015 1 次提交
-
-
由 Peter Griffin 提交于
LIBELF_32 is not defined in Kconfig, and is left over legacy which is not required in the upstream driver, so remove it. Suggested-by: NValentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: NPeter Griffin <peter.griffin@linaro.org> Acked-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-