- 25 10月, 2006 2 次提交
-
-
由 Benjamin Herrenschmidt 提交于
There are currently two versions of the functions for applying the feature fixups, one for CPU features and one for firmware features. In addition, they are both in assembly and with separate implementations for 32 and 64 bits. identify_cpu() is also implemented in assembly and separately for 32 and 64 bits. This patch replaces them with a pair of C functions. The call sites are slightly moved on ppc64 as well to be called from C instead of from assembly, though it's a very small change, and thus shouldn't cause any problem. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
Quick fix for lack of memset(__bss_start, 0, _end-__bss_start) in load_kernel(). If edata is unaligned, the loop will overwrite all memory because r3 and r4 will never be equal. Signed-off-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 23 10月, 2006 6 次提交
-
-
由 Timur Tabi 提交于
In ucc_fast.c and ucc_slow.c, "illegal" is twice spelled "illagal". Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Mark A. Greer 提交于
Don't require that the wrapper script be executable when building zImage.initrds. This has already been fixed for zImages. Signed-off-by: NMark A. Greer <mgreer@mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jake Moilanen 提交于
970GX cputable entry from Steve Winiecki. Signed-off-by: NJake Moilanen <moilanen@austin.ibm.com> arch/powerpc/kernel/cputable.c | 15 +++++++++++++++ arch/powerpc/oprofile/op_model_power4.c | 2 +- include/asm-powerpc/reg.h | 1 + 3 files changed, 17 insertions(+), 1 deletion(-) Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Srinivasa Ds 提交于
low_cpu_die is called from the CPU hotplug code on 32-bit powermacs, but it is only defined if CONFIG_PM || CONFIG_CPU_FREQ_PMAC. This changes the ifdef so it is defined for CONFIG_HOTPLUG_CPU on 32-bit machines. Signed-off-by: NSrinivasa DS <srinivasa@in.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Zang Roy-r61911 提交于
This fixes the warning message from the return value of function get_property(), by making sure that the variable that receives the value is marked as const. Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> -- Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
In calculating stolen time, we were trying to actually account for time spent in the hypervisor. We don't really have enough information to do that accurately, so don't try. Instead, we now calculate stolen time as time that the current cpu thread is not actually dispatching instructions. On chips without a PURR, we cannot do this, so stolen time will always be zero. On chips with a PURR, this is merely the difference between the elapsed PURR values and the elapsed TB values. This gives us much more sane vaules from tools such as mpstat, even if they are still a bit strange e.g. 2 busy threads on one cpu will both appear to have 50% user time and 50% stolen time while 1 busy thread on a cpu will look like 100% user on one of them and 100% idle on the other. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 22 10月, 2006 32 次提交
-
-
git://one.firstfloor.org/home/andi/git/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] x86-64: increase PHB1 split transaction timeout [PATCH] x86-64: Fix C3 timer test
-
由 Muli Ben-Yehuda 提交于
This patch increases the timeout for PCI split transactions on PHB1 on the first Calgary to work around an issue with the aic94xx adapter. Fixes kernel.org bugzilla #7180 (http://bugzilla.kernel.org/show_bug.cgi?id=7180) Based on excellent debugging and a patch by Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NJon Mason <jdmason@kudzu.us> Signed-off-by: NAndi Kleen <ak@suse.de> Acked-by: NDarrick J. Wong <djwong@us.ibm.com>
-
由 Andi Kleen 提交于
There was a typo in the C3 latency test to decide of the TSC should be used or not. It used the C2 latency threshold, not the C3 one. Fix that. This should fix the time on various dual core laptops. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Ralf Baechle 提交于
The current implementation uses a sequence of a cacheflush and a copy. This is racy in case of a multithreaded debuggee and renders GDB virtually unusable. Aside this fixes a performance hog rendering access to /proc/cmdline very slow and resulting in a enough cache stalls for the 34K AP/SP programming model to make the bare metal code on the non-Linux VPE miss RT deadlines. The main part of this patch was originally written by Ralf Baechle; Atushi Nemoto did the the debugging. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Noticed by Samium Gromoff but his patch got stale in flight ... Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] libata-sff: Allow for wacky systems [PATCH] ahci: readability tweak [PATCH] libata: typo fix [PATCH] ATA must depend on BLOCK [PATCH] libata: use correct map_db values for ICH8
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (22 commits) [PATCH] ibmveth: Fix index increment calculation [PATCH] Fix timer race [PATCH] Remove useless comment from sb1250 [PATCH] ucc_geth: changes to ucc_geth driver as a result of qe_lib changes and bugfixes [PATCH] sky2: 88E803X transmit lockup [PATCH] e1000: Reset all functions after a PCI error [PATCH] WAN/pc300: handle, propagate minor errors [PATCH] Update smc91x driver with ARM Versatile board info [PATCH] wireless: WE-20 compatibility for ESSID and NICKN ioctls [PATCH] zd1211rw: fix build-break caused by association race fix [PATCH] sotftmac: fix a slab corruption in WEP restricted key association [PATCH] airo: check if need to freeze [PATCH] wireless: More WE-21 potential overflows... [PATCH] zd1201: Possible NULL dereference [PATCH] orinoco: fix WE-21 buffer overflow [PATCH] airo.c: check returned values [PATCH] bcm43xx-softmac: Fix system hang for x86-64 with >1GB RAM [PATCH] bcm43xx-softmac: check returned value from pci_enable_device [PATCH] softmac: Fix WX and association related races [PATCH] bcm43xx: fix race condition in periodic work handler ...
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] uninorth: Add module param 'aperture' for aperture size
-
git://one.firstfloor.org/home/andi/git/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] x86-64: Revert timer routing behaviour back to 2.6.16 state [PATCH] x86-64: Overlapping program headers in physical addr space fix [PATCH] x86-64: Put more than one cpu in TARGET_CPUS [PATCH] x86: Revert new unwind kernel stack termination [PATCH] x86-64: Use irq_domain in ioapic_retrigger_irq [PATCH] i386: Disable nmi watchdog on all ThinkPads [PATCH] x86-64: Revert interrupt backlink changes [PATCH] x86-64: Fix ENOSYS in system call tracing [PATCH] i386: Fix fake return address [PATCH] x86-64: x86_64 add NX mask for PTE entry [PATCH] x86-64: Speed up dwarf2 unwinder [PATCH] x86: Use -maccumulate-outgoing-args [PATCH] x86-64: fix page align in e820 allocator [PATCH] x86-64: Fix for arch/x86_64/pci/Makefile CFLAGS [PATCH] i386: fix .cfi_signal_frame copy-n-paste error [PATCH] x86-64: typo in __assign_irq_vector when updating pos for vector and offset [PATCH] x86-64: x86_64 hot-add memory srat.c fix [PATCH] i386: Update defconfig [PATCH] x86-64: Update defconfig
-
由 Trond Myklebust 提交于
If someone has renamed a directory on the server, triggering the d_move code in d_materialise_unique(), then we need to invalidate the cached directory information in the source parent directory. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Maneesh Soni <maneesh@in.ibm.com> Cc: Dipankar Sarma <dipankar@in.ibm.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Trond Myklebust 提交于
If the caller tries to instantiate a directory using an inode that already has a dentry alias, then we attempt to rename the existing dentry instead of instantiating a new one. Fail with an ELOOP error if the rename would affect one of our parent directories. This behaviour is needed in order to avoid issues such as http://bugzilla.kernel.org/show_bug.cgi?id=7178Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Maneesh Soni <maneesh@in.ibm.com> Cc: Dipankar Sarma <dipankar@in.ibm.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matthew Wilcox 提交于
CCISS was producing warnings about shifts being greater than the size of the type and pointers being of incompatible type. Turns out this is because it's calling do_div on a 32-bit quantity. Upon further investigation, the sector_t total_size is being assigned to an int, and then we're calling do_div on that int. Obviously, sector_div is called for here, and I took the chance to refactor the code a little. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Acked-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Just like everyone else. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Jackson 提交于
Mistyped an ifdef CONFIG_CPUSETS - fixed. I doubt that anyone ever noticed. The impact of this typo was that if someone: 1) was using MPOL_BIND to force off node allocations 2) while using cpusets to constrain memory placement 3) when that cpuset was migrating that jobs memory 4) while the tasks in that job were actively forking then there was a rare chance that future allocations using that MPOL_BIND policy would be node local, not off node. Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
The zonelist may contain zones of nodes that have not been bootstrapped and we will oops if we try to allocate from those zones. So check if the node information for the slab and the node have been setup before attempting an allocation. If it has not been setup then skip that zone. Usually we will not encounter this situation since the slab bootstrap code avoids falling back before we have setup the respective nodes but we seem to have a special needs for pppc. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Acked-by: NAndy Whitcroft <apw@shadowen.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Kravetz <kravetz@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NMel Gorman <mel@csn.ul.ie> Acked-by: NWill Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andy Whitcroft 提交于
Reintroduce NODES_SPAN_OTHER_NODES for powerpc Revert "[PATCH] Remove SPAN_OTHER_NODES config definition" This reverts commit f62859bb. Revert "[PATCH] mm: remove arch independent NODES_SPAN_OTHER_NODES" This reverts commit a94b3ab7. Also update the comments to indicate that this is still required and where its used. Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Kravetz <kravetz@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NMel Gorman <mel@csn.ul.ie> Acked-by: NWill Schmidt <will_schmidt@vnet.ibm.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Gibson 提交于
The recent commit 751ae21c introduced a bug in the producer/consumer index calculation in the ibmveth driver - incautious use of the post-increment ++ operator resulted in an increment being immediately reverted. This patch corrects the logic. Without this patch, the driver oopses almost immediately after activation on at least some machines. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Acked-by: NSantiago Leon <santil@us.ibm.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
We seem to have lost the declaration of pci_get_device_reverse(), if we ever had one. Add a CONFIG_PCI=0 stub too. Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Daniel Walker 提交于
I have an acpi_pm that goes backwards, but it's not intel. I tested the verified read and my acpi_pm started to function properly. So I added it to the greylist. I'm assuming that's the right spot. I also added an unlikely() to the while, cause it seems appropriate. Signed-off-by: NDaniel Walker <dwalker@mvista.com> Acked-by: NJohn Stultz <johnstul@us.ibm.com> Acked-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
And a couple of bug fixes found by sparse. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Includes a couple of bugfixes found by sparse. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
.. so that you can use bitmaps with 32bit userspace on a 64 bit kernel. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Two less-used md personalities have bugs in the calculation of ->degraded (the extent to which the array is degraded). Signed-off-by: NNeil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
The change from __setup() to module_param_named() requires users to prefix the option with "generic.". This patch re-adds the __setup() additionally to the module_param_named(). Usually it would make sense getting rid of such an obsolete __setup() at some time, but considering that drivers/ide/ is slowly approaching a RIP status it's already implicitely scheduled for removal. This patch fixes kernel Bugzilla #7353. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jiri Slaby 提交于
Commits 881a8c12 and efe1ec27 corrects pci device matching in only one way; it no longer oopses/crashes, despite hotplug is not solved in these changes. Whenever pci_find_device -> pci_get_device change is performed, also pci_dev_get and pci_dev_put should be in most cases called to properly handle hotplug. This patch does exactly this thing -- increase refcount to let kernel know, that we are using this piece of HW just now. It affects moxa and rio char drivers. Cc: <R.E.Wolff@BitWizard.nl> Acked-by: NAmit Gud <gud@eth.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Cox 提交于
There are some Linux supported platforms that simply cannot hit the low I/O addresses used by ATA legacy mode PCI mappings. These platforms have a window for PCI space that is fixed by the board logic and doesn't include the neccessary locations. Provide a config option so that such platforms faced with a controller that they cannot support simply error it and punt Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Typo fix in commment. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Adrian Bunk 提交于
Fix the following compile error with CONFIG_ATA=y, CONFIG_BLOCK=n: ... CC drivers/ata/libata-scsi.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c: In function ‘ata_scsi_dev_config’: /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:791: warning: implicit declaration of function ‘blk_queue_max_sectors’ /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: ‘request_queue_t’ undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: ‘q’ undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:800: warning: implicit declaration of function ‘blk_queue_max_hw_segments’ /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c: In function ‘ata_scsi_slave_config’: /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:831: warning: implicit declaration of function ‘blk_queue_max_phys_segments’ make[3]: *** [drivers/ata/libata-scsi.o] Error 1 Bug report by Jesper Juhl. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Kristen Carlson Accardi 提交于
Use valid values for ICH8 map_db. With the old values, when the controller was in Native mode, and SCC was 1 (drives configured for IDE), any drive plugged into a slave port was not recognized. For Combined Mode (and SCC is still 1), 2 is a value value for MAP.map_value, and needs to be recognized. Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 David Gibson 提交于
On Thu, Oct 12, 2006 at 06:22:14PM +1000, David Gibson wrote: > Your recent ibmveth commit, 751ae21c > ("fix int rollover panic"), causes a rapid oops on my test machine > (POWER5 LPAR). > > I've bisected it down to that commit, but am still investigating the > cause of the crash itself. Found the problem, I believe: an object lesson in the need for great caution using ++. [...] @@ -213,6 +213,7 @@ static void ibmveth_replenish_buffer_poo } free_index = pool->consumer_index++ % pool->size; + pool->consumer_index = free_index; index = pool->free_map[free_index]; ibmveth_assert(index != IBM_VETH_INVALID_MAP); Since the ++ is used as post-increment, the increment is not included in free_index, and so the added line effectively reverts the increment. The produced_index side has an analagous bug. The following change corrects this: The recent commit 751ae21c introduced a bug in the producer/consumer index calculation in the ibmveth driver - incautious use of the post-increment ++ operator resulted in an increment being immediately reverted. This patch corrects the logic. Without this patch, the driver oopses almost immediately after activation on at least some machines. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-