- 29 10月, 2014 1 次提交
-
-
由 Dmitry Torokhov 提交于
When I was adjusting patch in 848d4793 to use devm_ioremap_resource() I messed it up. Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 25 10月, 2014 4 次提交
-
-
由 Dmitry Eremin-Solenikov 提交于
Sharp SL-6000 (tosa) touchscreen needs wider limits to properly map all points on the screen. Expand ranges in abs_x and abs_y arrays according to the touchscreen area. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Hans de Goede 提交于
These models need i8042.notimeout, otherwise the touchpad will not work. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=69731 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1111138 Cc: stable@vger.kernel.org Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Linus Walleij 提交于
The bitmask comment says it will enable GPIO 8-14 and 16-20 for keypad use, but it actually enables GPIO 8-11 and 13-20 due to a bit error. Instead of masking of the "hole" at GPIO 12 (which is used for keypad output 4) mask of the proper "hole" at GPIO 15. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Alexandre Courbot 提交于
Add the new flags argument to calls of (devm_)gpiod_get*(). Currently both forms (with or without the flags argument) are valid thanks to transitional macros in <linux/gpio/consumer.h>. These macros will be removed once all consumers are updated and the flags argument will become compulsory. Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 17 10月, 2014 4 次提交
-
-
由 Tommi Rantala 提交于
Add Thrustmaster as Xbox 360 controller vendor. This is required for example to make the GP XID (044f:b326) gamepad work. Signed-off-by: NTommi Rantala <tt.rantala@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Tommi Rantala 提交于
Add the USB ID for the Xbox 360 Thrustmaster Ferrari 458 Racing Wheel. Signed-off-by: NTommi Rantala <tt.rantala@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Jaewon Kim 提交于
The check to see whether the device is already disabled in max77693_haptic_disable() was inversed, this change corrects it. Signed-off-by: NJaewon Kim <jaewon02.kim@samsung.com> Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Chang Huaixin 提交于
xenkbd_disconnect_backend doesn't free grant table entry. This bug affects live migration. xenkbd_disconnect_backend uses gnttab_end_foreign_access_ref to handle grant table entry which doesn't really free an entry. Thus every time we do xenkbd_resume, grant table entry increses by one. As an grant table entry occupies 8 bytes, an grant table page has at most 512 entries. Every 512 times we do xenkdb_resume, grant table pages increses by one. After around 3500 times of live migration, grant table pages will increase by 7, causing too many pages to populate and hitting max_pages limit when assigning pages.Thus assign_pages will fail, so will live migration. Signed-off-by: NChang Huaixin <huaixin.chx@alibaba-inc.com> Acked-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 16 10月, 2014 1 次提交
-
-
由 Andreas Bosch 提交于
Since the change to struct input_mt_pos some variables are now bitfields instead of integers. Automatic conversion from integer to bitfield entry destroys information, therefore enforce boolean interpretation instead. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1114768 Fixes: 02d04254 ("Input: alps - use struct input_mt_pos to track coordinates") Signed-off-by: NAndreas Bosch <linux@progandy.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 12 10月, 2014 5 次提交
-
-
由 Dmitry Torokhov 提交于
Prepare second round of input updates for 3.18.
-
由 Dmitry Torokhov 提交于
Active multiplexing is a nice feature as it allows several pointing devices (such as touchpad and external mouse) use their native protocols at the same time. Unfortunately many manufacturers do not implement the feature properly even though they advertise it. The problematic implementations are never fixed, since Windows by default does not use this mode, and move from one BIOS/model of laptop to another. When active multiplexing is broken turning it on usually results in touchpad, keyboard, or both unresponsive. With PS/2 usage on decline (most of PS/2 devices in use nowadays are internal laptop touchpads), I expect number of users who have laptops with working MUX implementation, docking stations with external PS/2 ports, and who are still using external PS/2 mice, to be rather small. Let's flip the default to be OFF and allow activating it through i8042.nomux=0 kernel option. We'll also keep DMI table where we can record known good models. Acked-by: NJiri Kosina <jkosina@suse.cz> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Hans de Goede 提交于
Without this the aux port does not get detected, and consequently the touchpad will not work. https://bugzilla.redhat.com/show_bug.cgi?id=1110011 Cc: stable@vger.kernel.org Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
Unfortunately, ForcePad capability is not actually exported over PS/2, so we have to resort to DMI checks. Cc: stable@vger.kernel.org Reported-by: NNicole Faerber <nicole.faerber@kernelconcepts.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
Synchronize with mainline to bring in changes to Synaptics and i8042 drivers.
-
- 10 10月, 2014 4 次提交
-
-
由 Christian Gmeiner 提交于
This patch adds support for the ar1021 i2c based touchscreen. The driver is quite simple and only supports the Touch Reporting Protocol. This is the final version for an RFC patch send a while ago. http://www.spinics.net/lists/linux-input/msg29419.htmlSigned-off-by: NChristian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sjoerd Simons 提交于
To enable the cros_ec_keyb driver to be auto-loaded when build as module add an of match table (and export it) to match the modalias information passed on to userspace as the Cros EC MFD driver registers the MFD subdevices with an of_compatibility string. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Richard Leitner 提交于
Fix the format string for serio device name generation to avoid negative device numbers when the id exceeds the maximum signed integer value. Signed-off-by: NRichard Leitner <richard.leitner@skidata.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Richard Leitner 提交于
Fix the format string for input device name generation to avoid negative device numbers when the id exceeds the maximum signed integer value. Signed-off-by: NRichard Leitner <richard.leitner@skidata.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 09 10月, 2014 1 次提交
-
-
由 Dmitry Torokhov 提交于
Let's automatically set EV_ABS bit in device's event type list when calling input_set_abs_params() so that drivers do not have to do it explicitly. These calls are never in a hot paths so we won't lose much time by setting the same bit several times. Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 08 10月, 2014 3 次提交
-
-
由 Pramod Gurav 提交于
In case we start with the device not fully quiesced we should make sure we cancel the workqueue after freeing interrupt. Signed-off-by: NPramod Gurav <pramod.gurav@smartplayin.com> Acked-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Pramod Gurav 提交于
This change switch to managed resources to simplifies error handling and module unloading and does away with platform_driver remove function. Signed-off-by: NPramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
The 'max' size passed into the function is measured in number of bits (KEY_MAX, LED_MAX, etc) so we need to convert it accordingly before trying to copy the data out, otherwise we will try copying too much and end up with up with a page fault. Reported-by: NPavel Machek <pavel@ucw.cz> Reviewed-by: NPavel Machek <pavel@ucw.cz> Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 06 10月, 2014 2 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a set of two small fixes, both to code which went in during the merge window: cxgb4i has a scheduling in atomic bug in its new ipv6 code and uas fails to work properly with the new scsi-mq code" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] uas: disable use of blk-mq I/O path [SCSI] cxgb4i: avoid holding mutex in interrupt context
-
- 05 10月, 2014 1 次提交
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/josh/linux由 Linus Torvalds 提交于
Pull kconfig fixes for tiny setups from Josh Triplett: "Two Kconfig bugfixes for 3.17 related to tinification. These fixes make the Kconfig "General Setup" menu much more usable" * tag 'tiny/kconfig-for-3.17' of https://git.kernel.org/pub/scm/linux/kernel/git/josh/linux: init/Kconfig: Fix HAVE_FUTEX_CMPXCHG to not break up the EXPERT menu init/Kconfig: Hide printk log config if CONFIG_PRINTK=n
-
- 04 10月, 2014 6 次提交
-
-
由 Josh Triplett 提交于
commit 03b8c7b6 ("futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test") added the HAVE_FUTEX_CMPXCHG symbol right below FUTEX. This placed it right in the middle of the options for the EXPERT menu. However, HAVE_FUTEX_CMPXCHG does not depend on EXPERT or FUTEX, so Kconfig stops placing items in the EXPERT menu, and displays the remaining several EXPERT items (starting with EPOLL) directly in the General Setup menu. Since both users of HAVE_FUTEX_CMPXCHG only select it "if FUTEX", make HAVE_FUTEX_CMPXCHG itself depend on FUTEX. With this change, the subsequent items display as part of the EXPERT menu again; the EMBEDDED menu now appears as the next top-level item in the General Setup menu, which makes General Setup much shorter and more usable. Signed-off-by: NJosh Triplett <josh@joshtriplett.org> Acked-by: NRandy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org>
-
由 Josh Triplett 提交于
The buffers sized by CONFIG_LOG_BUF_SHIFT and CONFIG_LOG_CPU_MAX_BUF_SHIFT do not exist if CONFIG_PRINTK=n, so don't ask about their size at all. Signed-off-by: NJosh Triplett <josh@joshtriplett.org> Acked-by: NRandy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Two i2c driver bugfixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: qup: Fix order of runtime pm initialization i2c: rk3x: fix 0 length write transfers
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull trace ring buffer iterator fix from Steven Rostedt: "While testing some new changes for 3.18, I kept hitting a bug every so often in the ring buffer. At first I thought it had to do with some of the changes I was working on, but then testing something else I realized that the bug was in 3.17 itself. I ran several bisects as the bug was not very reproducible, and finally came up with the commit that I could reproduce easily within a few minutes, and without the change I could run the tests over an hour without issue. The change fit the bug and I figured out a fix. That bad commit was: Commit 651e22f2 "ring-buffer: Always reset iterator to reader page" This commit fixed a bug, but in the process created another one. It used the wrong value as the cached value that is used to see if things changed while an iterator was in use. This made it look like a change always happened, and could cause the iterator to go into an infinite loop" * tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Fix infinite spin in reading buffer
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs/smb3 fixes from Steve French: "Fix for CIFS/SMB3 oops on reconnect during readpages (3.17 regression) and for incorrectly closing file handle in symlink error cases" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix readpages retrying on reconnects Fix problem recognizing symlinks
-
由 Dmitry Torokhov 提交于
Prepare first round of input updates for 3.18.
-
- 03 10月, 2014 8 次提交
-
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull raid5 discard fix from Neil Brown: "One fix for raid5 discard issue" * tag 'md/3.17-final-fix' of git://neil.brown.name/md: md/raid5: disable 'DISCARD' by default due to safety concerns.
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Nothing too major or scary. One i915 regression fix, nouveau has a tmds regression fix, along with a regression fix for the runtime pm code for optimus laptops not restoring the display hw correctly" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: make sure display hardware is reinitialised on runtime resume drm/nouveau: punt fbcon resume out to a workqueue drm/nouveau: fix regression on original nv50 board drm/nv50/disp: fix dpms regression on certain boards drm/i915: Flush the PTEs after updating them before suspend
-
由 Christoph Hellwig 提交于
The uas driver uses the block layer tag for USB3 stream IDs. With blk-mq we can get larger tag numbers that the queue depth, which breaks this assumption. A fix is under way for 3.18, but sits on top of large changes so can't easily be backported. Set the disable_blk_mq path so that a uas device can't easily crash the system when using blk-mq for SCSI. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from Rafael Wysocki: "These are three regression fixes (cpufreq core, pcc-cpufreq, i915 / ACPI) and one trivial fix for a callback return value mismatch in the cpufreq integrator driver. Specifics: - A recent cpufreq core fix went too far and introduced a regression in the system suspend code path. Fix from Viresh Kumar. - An ACPI-related commit in the i915 driver that fixed backlight problems for some Thinkpads inadvertently broke a Dell machine (in 3.16). Fix from Aaron Lu. - The pcc-cpufreq driver was broken during the 3.15 cycle by a commit that put wait_event() under a spinlock by mistake. Fix that (Rafael J Wysocki). - The return value type of integrator_cpufreq_remove() is void, but should be int. Fix from Arnd Bergmann" * tag 'pm+acpi-3.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: update 'cpufreq_suspended' after stopping governors ACPI / i915: Update the condition to ignore firmware backlight change request cpufreq: integrator: fix integrator_cpufreq_remove return type cpufreq: pcc-cpufreq: Fix wait_event() under spinlock
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
final regression fix for 3.17. * tag 'drm-intel-fixes-2014-10-02' of git://anongit.freedesktop.org/drm-intel: drm/i915: Flush the PTEs after updating them before suspend
-
由 Andy Gross 提交于
The runtime pm calls need to be done before populating the children via the i2c_add_adapter call. If this is not done, a child can run into issues trying to do i2c read/writes due to the pm_runtime_sync failing. Signed-off-by: NAndy Gross <agross@codeaurora.org> Reviewed-by: NFelipe Balbi <balbi@ti.com> Acked-by: NBjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
由 Alexandru M Stan 提交于
i2cdetect -q was broken (everything was a false positive, and no transfers were actually being sent over i2c). The way it works is by sending a 0 length write request and checking for NACK. This patch fixes the 0 length writes and actually sends them. Reported-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NAlexandru M Stan <amstan@chromium.org> Tested-by: NDoug Anderson <dianders@chromium.org> Tested-by: NMax Schwarz <max.schwarz@online.de> Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
由 Rafael J. Wysocki 提交于
* pm-cpufreq: cpufreq: update 'cpufreq_suspended' after stopping governors cpufreq: integrator: fix integrator_cpufreq_remove return type cpufreq: pcc-cpufreq: Fix wait_event() under spinlock * acpi-video: ACPI / i915: Update the condition to ignore firmware backlight change request
-