- 29 6月, 2015 2 次提交
-
-
由 Takashi Iwai 提交于
Dell E7450 [0128:062e] needs the same quirk as other E7xx models. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100571 Cc: <stable@vger.kernel.org> # v4.1 Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fujitsu Lifebook E780 sets the sequence number 0x0f to only only of the two headphones, thus the driver tries to assign another as the line-out, and this results in the inconsistent mapping between the created jack ctl and the actual I/O. Due to this, PulseAudio doesn't handle it properly and gets the silent output. The fix is to ignore the non-HP sequencer checks. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=99681 Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 6月, 2015 1 次提交
-
-
由 Takashi Iwai 提交于
Acer Aspire V5 with ALC282 codec needs the similar quirk like Dell laptops to support the headset mic. The headset mic pin is 0x19 and it's not exposed by BIOS, thus we need to fix the pincfg as well. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96201 Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 6月, 2015 2 次提交
-
-
由 Hui Wang 提交于
Those FIXUPs were applied to the machines through pin quirks, but recently the PCI_QUIRK makes them can't apply to the machines. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=99851Signed-off-by: NHui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> # v4.1 Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
While the commit [d0a601c2: ALSA: jack: Fix the id uniqueness check] fixes the wrong string check, it leads to a worse result -- the loop in get_available_index() goes into an endless loop. The cause is that snd_ctl_find_id() returns the object assigned to the numid if it's set. Thus it points to the previous entry again. This patch clears the numid field for the next call properly. Reported-and-tested-by: NTomáš Pružina <pruzinat@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 6月, 2015 3 次提交
-
-
由 Alex Deucher 提交于
Fixes audio problems on newer asics. Noticed by: Kelly Anderson <kelly@xilka.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The widget power-save that was enabled in 4.1 kernel seems resulting in the silent output on VIA codecs by some reason. Some widgets get wrong power states. As a quick fix, turn this flag off while keeping power_down_unused flag. This will bring back to the state of 4.0.x. Fixes: 688b12cc ('ALSA: hda - Use the new power control for VIA codecs') Reported-and-tested-by: NHarald Dunkel <harri@afaics.de> Cc: <stable@vger.kernel.org> # v4.1 Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
Thinkpad X250, when attached to a dock, has two headphone outs but no line out. Make sure we don't try to turn this into one headphone and one line out (since that disables the headphone amp on the dock). Alsa-info at http://www.alsa-project.org/db/?f=36f8764e1d782397928feec715d0ef90dfddd4c1 Cc: stable@vger.kernel.org Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 6月, 2015 1 次提交
-
-
由 Takashi Iwai 提交于
The pcm_class sysfs of each PCM substream gives only "none" since the recent code change to embed the struct device. Fix the code to point directly to the embedded device object properly. Fixes: ef46c7af ('ALSA: pcm: Embed struct device') Cc: <stable@vger.kernel.org> # v4.0+ Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 6月, 2015 25 次提交
-
-
由 Takashi Iwai 提交于
Merge tag 'asoc-v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: A couple more updates for v4.2 These were sitting on my laptop.
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
ASoC: Further updates for v4.2 There's a bunch of additional updates and fixes that came in since my orignal pull request here, including DT support for rt5645 and fairly large serieses of cleanups and improvements to tas2552 and rcar. # gpg: Signature made Mon 22 Jun 2015 10:24:48 BST using RSA key ID 5D5487D0 # gpg: Oops: keyid_from_fingerprint: no pubkey # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
由 Mark Brown 提交于
ASoC: Updates for v4.2 The big thing this release has been Liam's addition of topology support to the core. We've also seen quite a bit of driver work and the continuation of Lars' refactoring for component support. - Support for loading ASoC topology maps from firmware, intended to be used to allow self-describing DSP firmware images to be built which can map controls added by the DSP to userspace without the kernel needing to know about individual DSP firmwares. - Lots of refactoring to avoid direct access to snd_soc_codec where it's not needed supporting future refactoring. - Big refactoring and cleanup serieses for the Wolfson ADSP and TI TAS2552 drivers. - Support for TI TAS571x power amplifiers. - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs. - Support for x86 systems with RT5650 and Qualcomm Storm. # gpg: Signature made Mon 08 Jun 2015 18:48:37 BST using RSA key ID 5D5487D0 # gpg: Oops: keyid_from_fingerprint: no pubkey # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903', 'asoc/fix/wm8955' and 'asoc/fix/wm8960' into asoc-linus
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', 'asoc/fix/intel', 'asoc/fix/max98925', 'asoc/fix/rcar' and 'asoc/fix/ux500' into asoc-linus
-
由 Mark Brown 提交于
-
由 Takashi Iwai 提交于
Merge tag 'asoc-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Further updates for v4.2 There's a bunch of additional updates and fixes that came in since my orignal pull request here, including DT support for rt5645 and fairly large serieses of cleanups and improvements to tas2552 and rcar.
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/topic/qcom', 'asoc/topic/rcar', 'asoc/topic/rt286' and 'asoc/topic/rt5640' into asoc-next
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/topic/mediatek', 'asoc/topic/ml26124' and 'asoc/topic/omap' into asoc-next
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
ASoC: Updates for v4.2 The big thing this release has been Liam's addition of topology support to the core. We've also seen quite a bit of driver work and the continuation of Lars' refactoring for component support. - Support for loading ASoC topology maps from firmware, intended to be used to allow self-describing DSP firmware images to be built which can map controls added by the DSP to userspace without the kernel needing to know about individual DSP firmwares. - Lots of refactoring to avoid direct access to snd_soc_codec where it's not needed supporting future refactoring. - Big refactoring and cleanup serieses for the Wolfson ADSP and TI TAS2552 drivers. - Support for TI TAS571x power amplifiers. - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs. - Support for x86 systems with RT5650 and Qualcomm Storm. # gpg: Signature made Mon 08 Jun 2015 18:48:37 BST using RSA key ID 5D5487D0 # gpg: Oops: keyid_from_fingerprint: no pubkey # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903', 'asoc/fix/wm8955' and 'asoc/fix/wm8960' into asoc-linus
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', 'asoc/fix/intel', 'asoc/fix/max98925', 'asoc/fix/rcar' and 'asoc/fix/ux500' into asoc-linus
-
由 Mark Brown 提交于
-
- 20 6月, 2015 1 次提交
-
-
由 Matt Ranostay 提交于
Signed-off-by: NMatt Ranostay <mranostay@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 6月, 2015 2 次提交
-
-
由 Richard Fitzgerald 提交于
The rate controls are codec-specific, it's not possible to generically say what the range or the meaning of each control is (or even if they exist at all) - that depends on the particular codec. This is currently being handled for Arizona codecs by putting an Arizona-specific table of controls inside the wm_adsp driver. This creates a dependency between wm_adsp and arizona.c, and is an awkward solution if the ADSP is used in another family of codecs Fix this by moving the Arizona-specific rate controls into the Arizona codec drivers. Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Mark Brown 提交于
Merge branches 'topic/adsp' and 'topic/dapm' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-arizona
-
- 18 6月, 2015 1 次提交
-
-
由 Axel Lin 提交于
Fix trivial typo. Signed-off-by: NAxel Lin <axel.lin@ingics.com> Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 17 6月, 2015 2 次提交
-
-
由 Vinod Koul 提交于
A typical io ops use simple io accessors which can be common for most drivers, so provide a default ops which will be used if driver doesn't provide one Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vinod Koul 提交于
In HDA extended bus the HDA link objects are created when multilink capabilities are parsed. We need a routine which free up these link objects for a bus. So add snd_hdac_link_free_all routine Signed-off-by: NJeeja KP <jeeja.kp@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-