- 24 2月, 2016 24 次提交
-
-
由 Sawan Chandak 提交于
Signed-off-by: NSawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Himanshu Madhani 提交于
Set bit 12 of additional firmware options 3 to let firmware hold status IOCB until ABTS response is received from Target. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Joe Carnuccio 提交于
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Chad Dupuis 提交于
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Alexey Khoroshilov 提交于
hwi_write_buffer() does not check if mapping dma memory succeed. The patch adds the check and failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Acked-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
Driver version: 11.0.0.0 Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinicke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
Login/Logout loop was hanging after few hours. /var/log/message showed that alloc_wrb_handle() function was not able to allocate any new WRB. Sep 11 11:25:22 Jhelum10 kernel: connection32513:0: Could not send nopout Sep 11 11:25:22 Jhelum10 kernel: scsi host10: BM_4989 : Alloc of WRB_HANDLE Failed for the CID : 384 Sep 11 11:25:22 Jhelum10 kernel: connection32513:0: Could not allocate pdu for mgmt task. Driver allocates WRB to pass login negotiated parameters information to FW in beiscsi_offload_connection(). This allocated WRB was not freed so there was WRB_Leak happening. Put WRB used for posting the login-negotiated parameters back in pool. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
Use only port_link_status only to determine link state change. Only bit 0 is used to get the state. Remove code for processing port_fault. Fixed get_nic_conf structure definition. Removed rsvd[23] field in be_cmd_get_nic_conf_resp. Moved definitions of struct field values below the field. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinicke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
Async link event provides port_speed info. Cache the port_speed info and use the same to report in ISCSI_HOST_PARAM_PORT_SPEED query. Removed link status query IOCTL used to do the same. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinicke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
iscsi_port_speed and iscsi_port_speed_names have new entries for 25Gbps and 40Gbps link speeds. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinicke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
OS not responding when running 2 port traffic on 72 CPUs system. be2iscsi IRQs gets affined to CPU0 when irqbalancer is disabled. be_iopoll processing completions in BLOCK_IOPOLL_SOFTIRQ hogged CPU0. 1. Use budget to exit the polling loop. beiscsi_process_cq didn't honour it. 2. Rearming of EQ is done only after iopoll completes. [mkp: Fixed up blk_iopoll -> irq_poll transition] Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
Change return value of completed MCC EBUSY to EINVAL. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
System crash in I+T card personality. Fix to add validation for ULP in initiator mode, physical port number, and supported queue, icd, cid counts. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinicke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
Log messages for misconfigured transceivers reported by FW. Register async events that driver handles using MCC_CREATE_EXT ioctl. Errors messages for faulted/uncertified/unqualified optics are logged. Added IOCTL to get port_name to be displayed in error message. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
Configuring VLAN parameters through IPv6 interface was not supported in driver. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
Null pointer dereference in shutdown path after taking dump. Shutdown path is not needed as FW comes up clean every time during probe after issuing FUNCTION reset MBOX command. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
Use of mutex_lock_interruptible can return -EINTR, handle and log the error. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
FW recommended timeout for all mbox command is 30s. Use msleep instead mdelay to relinquish CPU when polling for mbox completion. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
alloc_mcc_tag needs to be done under mcc_lock. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinicke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
beiscsi_mccq_compl sets MCC_TAG_STATE_TIMEOUT before setting up tag_mem_state. be_mcc_compl_process_isr checks for MCC_TAG_STATE_TIMEOUT first then accesses tag_mem_state which might be still getting populated in the process context. Fix: Set MCC_TAG_STATE_TIMEOUT after tag_mem_state is populated. Removed MCC_TAG_STATE_COMPLETED. When posted its in running state and the running state is cleared in be_mcc_compl_process_isr. be_mcc_notify now takes tag argument to set it to running state. Use bit operations for tag_state. Use barriers before setting the state. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinicke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
This is second part of actual fix for soft lockup. All mbox cmds issued using BMBX and MCC are synchronized using mutex mbox_lock instead of spin_lock. Used mutex_lock_interruptible where ever possible. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NShane Seymour <shane.seymour@hpe.com> Reviewed-by: NHannes Reinicke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
We are taking mbox_lock spinlock which disables pre-emption before we poll for mbox completion. Waiting there with spinlock held in excess of 20s will cause soft lockup. Actual fix is to change mbox_lock to mutex. The changes are done in phases. This is the first part. 1. Changed mgmt_get_all_if_id to use MCC where after posting lock is released. 2. Changed be_mbox_db_ready_wait to busy wait for 12s max and removed wait_event_timeout. Added error handling code for IO reads. OPCODE_COMMON_QUERY_FIRMWARE_CONFIG mbox command takes 8s time when unreachable boot targets configured. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: "Stable bugfixes: - Fix nfs_size_to_loff_t - NFSv4: Fix a dentry leak on alias use Other bugfixes: - Don't schedule a layoutreturn if the layout segment can be freed immediately. - Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode - rpcrdma_bc_receive_call() should init rq_private_buf.len - fix stateid handling for the NFS v4.2 operations - pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page - fix panic in gss_pipe_downcall() in fips mode - Fix a race between layoutget and pnfs_destroy_layout - Fix a race between layoutget and bulk recalls" * tag 'nfs-for-4.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.x/pnfs: Fix a race between layoutget and bulk recalls NFSv4.x/pnfs: Fix a race between layoutget and pnfs_destroy_layout auth_gss: fix panic in gss_pipe_downcall() in fips mode pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page nfs4: fix stateid handling for the NFS v4.2 operations NFSv4: Fix a dentry leak on alias use xprtrdma: rpcrdma_bc_receive_call() should init rq_private_buf.len pNFS: Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode pNFS: Fix pnfs_mark_matching_lsegs_return() nfs: fix nfs_size_to_loff_t
-
由 Linus Torvalds 提交于
In commit 11f1a4b9 ("x86: reorganize SMAP handling in user space accesses") I changed how the stac/clac instructions were generated around the user space accesses, which then made it possible to do batched accesses efficiently for user string copies etc. However, in doing so, I completely spaced out, and didn't even think about the 32-bit case. And nobody really even seemed to notice, because SMAP doesn't even exist until modern Skylake processors, and you'd have to be crazy to run 32-bit kernels on a modern CPU. Which brings us to Andy Lutomirski. He actually tested the 32-bit kernel on new hardware, and noticed that it doesn't work. My bad. The trivial fix is to add the required uaccess begin/end markers around the raw accesses in <asm/uaccess_32.h>. I feel a bit bad about this patch, just because that header file really should be cleaned up to avoid all the duplicated code in it, and this commit just expands on the problem. But this just fixes the bug without any bigger cleanup surgery. Reported-and-tested-by: NAndy Lutomirski <luto@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 2月, 2016 8 次提交
-
-
由 Trond Myklebust 提交于
Replace another case where the layout 'plh_block_lgets' can trigger infinite loops in send_layoutget(). Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
If the server reboots while there is a layoutget outstanding, then the call to pnfs_choose_layoutget_stateid() will fail with an EAGAIN error, which causes an infinite loop in send_layoutget(). The reason why we never break out of the loop is that the layout 'plh_block_lgets' field is never cleared. Fix is to replace plh_block_lgets with NFS_LAYOUT_INVALID_STID, which can be reset after a new layoutget. Fixes: ab7d763e ("pNFS: Ensure nfs4_layoutget_prepare returns...") Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v4.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Two more small fixes. One is by Yang Shi who added a READ_ONCE_NOCHECK() to the scan of the stack made by the stack tracer. As the stack tracer scans the entire kernel stack, KASAN triggers seeing it as a "stack out of bounds" error. As the scan is looking at the contents of the stack from parent functions. The NOCHECK() tells KASAN that this is done on purpose, and is not some kind of stack overflow. The second fix is to the ftrace selftests, to retrieve the PID of executed commands from the shell with '$!' and not by parsing 'jobs'" * tag 'trace-fixes-v4.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing, kasan: Silence Kasan warning in check_stack of stack_tracer ftracetest: Fix instance test to use proper shell command for pids
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen bug fixes from David Vrabel: - Two scsiback fixes (resource leak and spurious warning). - Fix DMA mapping of compound pages on arm/arm64. - Fix some pciback regressions in MSI-X handling. - Fix a pcifront crash due to some uninitialize state. * tag 'for-linus-4.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted. xen/pcifront: Report the errors better. xen/pciback: Save the number of MSI-X entries to be copied later. xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY xen: fix potential integer overflow in queue_reply xen/arm: correctly handle DMA mapping of compound pages xen/scsiback: avoid warnings when adding multiple LUNs to a domain xen/scsiback: correct frontend counting
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Looks like a lot, but mostly driver fixes scattered all over as usual. Of note: 1) Add conditional sched in nf conntrack in cleanup to avoid NMI watchdogs. From Florian Westphal. 2) Fix deadlock in nfnetlink cttimeout, also from Floarian. 3) Fix handling of slaves in bonding ARP monitor validation, from Jay Vosburgh. 4) Callers of ip_cmsg_send() are responsible for freeing IP options, some were not doing so. Fix from Eric Dumazet. 5) Fix per-cpu bugs in mvneta driver, from Gregory CLEMENT. 6) Fix vlan handling in mv88e6xxx DSA driver, from Vivien Didelot. 7) bcm7xxx PHY driver bug fixes from Florian Fainelli. 8) Avoid unaligned accesses to protocol headers wrt. GRE, from Alexander Duyck. 9) SKB leaks and other problems in arc_emac driver, from Alexander Kochetkov. 10) tcp_v4_inbound_md5_hash() releases listener socket instead of request socket on error path, oops. Fix from Eric Dumazet. 11) Missing socket release in pppoe_rcv_core() that seems to have existed basically forever. From Guillaume Nault. 12) Missing slave_dev unregister in dsa_slave_create() error path, from Florian Fainelli. 13) crypto_alloc_hash() never returns NULL, fix return value check in __tcp_alloc_md5sig_pool. From Insu Yun. 14) Properly expire exception route entries in ipv4, from Xin Long. 15) Fix races in tcp/dccp listener socket dismantle, from Eric Dumazet. 16) Don't set IFF_TX_SKB_SHARING in vxlan, geneve, or GRE, it's not legal. These drivers modify the SKB on transmit. From Jiri Benc. 17) Fix regression in the initialziation of netdev->tx_queue_len. From Phil Sutter. 18) Missing unlock in tipc_nl_add_bc_link() error path, from Insu Yun. 19) SCTP port hash sizing does not properly ensure that table is a power of two in size. From Neil Horman. 20) Fix initializing of software copy of MAC address in fmvj18x_cs driver, from Ken Kawasaki" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (129 commits) bnx2x: Fix 84833 phy command handler bnx2x: Fix led setting for 84858 phy. bnx2x: Correct 84858 PHY fw version bnx2x: Fix 84833 RX CRC bnx2x: Fix link-forcing for KR2 net: ethernet: davicom: fix devicetree irq resource fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC address Driver: Vmxnet3: Update Rx ring 2 max size net: netcp: rework the code for get/set sw_data in dma desc soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data net: ti: netcp: restore get/set_pad_info() functionality MAINTAINERS: Drop myself as xen netback maintainer sctp: Fix port hash table size computation can: ems_usb: Fix possible tx overflow Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb net: bcmgenet: Fix internal PHY link state af_unix: Don't use continue to re-execute unix_stream_read_generic loop unix_diag: fix incorrect sign extension in unix_lookup_by_ino bnxt_en: Failure to update PHY is not fatal condition. bnxt_en: Remove unnecessary call to update PHY settings. ...
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Two fixes headed for stable: - Remove an unnecessary speed_index lookup for thermal hook in the gpio-fan driver. The unnecessary speed lookup can hog the system. - Handle negative conversion values correctly in the ads1015 driver" * tag 'hwmon-for-linus-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook hwmon: (ads1015) Handle negative conversion values correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Doug Ledford: "One ocrdma fix: - The new CQ API support was added to ocrdma, but they got the arming logic wrong, so without this, transfers eventually fail when they fail to arm the interrupt properly under load Two related fixes for mlx4: - When we added the 64bit extended counters support to the core IB code, they forgot to update the RoCE side of the mlx4 driver (the IB side they properly updated). I debated whether or not to include these patches as they could be considered feature enablement patches, but the existing code will blindy copy the 32bit counters, whether any counters were requested at all (a bug). These two patches make it (a) check to see that counters were requested and (b) copy the right counters (the 64bit support is new, the 32bit is not). For that reason I went ahead and took them" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/mlx4: Add support for the port info class for RoCE ports IB/mlx4: Add support for extended counters over RoCE ports RDMA/ocrdma: Fix arm logic to align with new cq API
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Some bugfixes from I2C for you: A fix for a RuntimePM regression with OMAP, a fix to enable TCO for Lewisburg platforms, and a typo fix while we are here" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i801: Adding Intel Lewisburg support for iTCO i2c: uniphier: fix typos in error messages i2c: omap: Fix PM regression with deferred probe for pm_runtime_reinit
-
- 22 2月, 2016 8 次提交
-
-
由 David S. Miller 提交于
Merge tag 'linux-can-fixes-for-4.5-20160221' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-02-21 this is a pull reqeust of one patch for net/master. The patch is by Gerhard Uttenthaler and fixes a potential tx overflow in the ems_usb driver. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Yuval Mintz says: ==================== bnx2x: Fix 848xx phys This series contains link-related fixes, mostly for the 848xx phys [2 patches are for 84833, and 2 patches are for 84858]. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Current initialization sequence is lacking, causing some configurations to fail. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
The phy's firmware version isn't being parsed properly as it's currently parsed like the rest of the 848xx phys. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
There's a problem in current 84833 phy configuration - in case 1Gb link is configured and jumbo-sized packets are being used, device will experience RX crc errors. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Currently, when link is using KR2 it cannot be forced to any speed other than 20g. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.om> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth由 David S. Miller 提交于
Johan Hedberg says: ==================== pull request: bluetooth 2016-02-20 Here's an important patch for 4.5 which fixes potential invalid pointer access when processing completed Bluetooth HCI commands. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-