Legacy setCrtc has a nice fastpath for just updating the frontbuffer
when the output routing doesn't change. Which I of course tried to
keep working, except that I fumbled the job: The helpers correctly
compute ->mode_changed, CRTC updates get correctly skipped but
connector functions are called unconditionally.

Fix this.

v2: For the disable sided connector->state->crtc might be NULL.
Instead look at the old_connector_state->crtc, but still use the new
crtc state for that old crtc. Reported by Thierry.
Reported-and-Tested-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> (v1)
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> (v1)
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Before, we would set the property, but also return -EINVAL because of a
broken fallthrough.
Signed-off-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Active was here, and we allowed users to set it, but not to get it as
well.
Signed-off-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just as we provide crtc->mode pre-populated with the requested mode,
move adjusted_mode into hwmode before we call the crtc's mode_set,
making sure to restore it on failure.

Allows drivers which thoughtlessly discard adjusted_mode in their
mode_set hooks (e.g. Exynos) to use hwmode directly, and also provides
some neat symmetry with crtc->mode.
Signed-off-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since we're now using mode == NULL to represent disabled, it's not
wholly surprising that we'd want to compare NULL modes.
Signed-off-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

mode is always NULL at this point in the function, so make our intention
clear.
Signed-off-by: NDaniel Stone <daniels@collabora.com>
[danvet: Stop clearing mode too to enlist gcc in tracking
uninitialized usage. And remove a space while at it.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When doing a native or i2c aux write the sink will indicate the number
of bytes written even if it the nacks the transfer. When we receive a
nack we just return an error upwards, but it might still be interesting
to see how many bytes made it before the nack. So include that information
in the debug messages.

v2: Also print the message size (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

rcar-du fixes

* 'drm/next/rcar-du' of git://linuxtv.org/pinchartl/fbdev:
  drm: rcar-du: Enable the atomic updates API
  drm: rcar-du: Don't initialize event->pipe field
  drm: rcar-du: Fix framebuffer reference leak through plane state
  MAINTAINERS: Remove rcar-du.h entry

adv7511 fixes.

* 'drm/next/adv7511' of git://linuxtv.org/pinchartl/fbdev:
  drm: adv7511: Refactor power management
  drm: adv7511: Fix nested sleep when reading EDID
  drm: adv7511: Fix DDC error interrupt handling

- DP MST support (disabled by default)
- non-ATOM aux support (DCE5+)
- output csc support for clamped RGB
- Lots of new queries for profiling, Gallium HUD, etc.
- Misc fixes

* 'drm-next-4.1' of git://people.freedesktop.org/~agd5f/linux: (40 commits)
  drm/radeon: add DisplayPort MST support (v2)
  drm/radeon: improve encoder picking functions (v2)
  drm/radeon: export max link rate calculation
  drm/radeon: add new atombios encoder/transmitter interfaces
  drm/radeon: add some MST registers
  radeon/fb: add wrapper functions around fb connector add/remove
  radeon/cik: add support for short HPD irqs
  radeon/si: add support for short HPD irqs
  radeon/evergreen: add support for short HPD irqs
  radeon: introduce a dp_work handler
  drm/dp_mst: add a function to retrieve vcpi slots
  drm/radeon: program auxch directly (v2)
  drm/radeon: fix doublescan modes (v2)
  drm/radeon: typo in parameter description
  drm/radeon: add support for read reg query from radeon info ioctl
  drm/radeon: add get_allowed_info_register for CIK
  drm/radeon: add get_allowed_info_register for SI
  drm/radeon: add get_allowed_info_register for cayman/TN
  drm/radeon: add get_allowed_info_register for EG/BTC
  drm/radeon: add get_allowed_info_register for r6xx/r7xx
  ...

This adds initial DP 1.2 MST support to radeon, on CAYMAN
and up in theory.

This is off by default.

v2: agd5f:
- add UNIPHY3 offsets
- move atom cmd table code into atombios_encoders.c
- whitespace cleanup
- replace some magic numbers with proper defines
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For MST we need to be able to pick front end encoders
separate from backend, but only for MST, so we need to
make the encoder picking interface smarter.

v2: agd5f: squash in:
drm/radeon: release digital encoder before asking for new one
Reported-by: NDieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need this in the MST code later.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These allow overriding the encoder id with the frontend,
we need this for setting up MST.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These registers will be used later to setup
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These are just two wrappers to be used in the MST code later.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds support to process short HPD irqs on CIK gpus.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds support to process short HPD irqs on SI gpus.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds support for processing short irqs, and triggering
the dp_work.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is to be called on short HPD irqs, just introduce
the basic infrastructure for it.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

radeon requires this to get the slots for later filling
out a table on every transition.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The atombios tables have an unfortunate restriction on only
being able to write 12 bytes, MST really wants 16-bytes here,
and since the hw can do it, we should just write directly to it.

This uses a module option to allow for it now, and maybe
we should provide the old code as a fallback for a while.

v2: (agd5f)
- move registers to a proper register header
- only enable on DCE5+
- enable by default on DCE5+
- Switch pad to aux mode before using it
- reformat instance handling to better match the
  rest of the driver
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the correct flags for atom.

v2: handle DRM_MODE_FLAG_DBLCLK
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

"defaul" -> "default"
Signed-off-by: NVincent Batts <vbatts@hashbangbash.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows us to query certain registers from userspace
for profiling and harvest configuration.  E.g., it can
be used by the GALLIUM_HUD for profiling the status of
various gfx blocks.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Registers that can be fetched from the info ioctl.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Registers that can be fetched from the info ioctl.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Registers that can be fetched from the info ioctl.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Registers that can be fetched from the info ioctl.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Registers that can be fetched from the info ioctl.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Just a stub.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds a callback for each asic family to determine what
registers are allowed to be read back via the info ioctl.

The idea here is to allow usermode to query things like GPU status
registers or GPU harvest registers for profiling and determining
the gfx config.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allow the UMDs to query the current sclk/mclk
for profiling, etc.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Will be used for exposing current clocks via INFO ioctl.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Will be used for exposing current clocks via INFO ioctl.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Will be used for exposing current clocks via INFO ioctl.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Will be used for exposing current clocks via INFO ioctl.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Will be used for exposing current clocks via INFO ioctl.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Will be used for exposing current clocks via INFO ioctl.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>