Document the individual alarm and beep bits of the w83781d driver.
Ideally we would offer a chip-independant interface for them, but
until it's done, it's only fair that we document the current
interface.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use dynamic sysfs callbacks and array of attributes to reduce the
w83627ehf driver size.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add support for the Intel Pentium M series to the hwmon-vid driver.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add support for the Winbond W83687THF chip to the w83627hf hardware
monitoring driver. This new chip is almost similar to the already
supported W83627THF chip, except for VID and a few other minor
changes.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert the new f71805f hardware monitoring driver to use mutexes
instead of semaphores.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

convert drivers/hwmon/*.c semaphore use to mutexes.

the conversion was generated via scripts, and the result was validated
automatically via a script as well.

all affected hwmon drivers were build-tested.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Cleanup after the semaphores to mutexes conversions in the i2c
subsystem.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

semaphore to mutex conversion.

the conversion was generated via scripts, and the result was validated
automatically via a script as well.

build tested.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Speed up i2c_smbus_write_block_data and i2c_smbus_read_i2c_block_data
a bit by using memcpy instead of an explicit loop.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Drop 3 useless macros in the w83792d hardware monitoring driver.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use arrays of attributes in the w83792d driver.
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NYuan Mu <ymu@winbond.com.tw>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch refactors SENSOR_DEVICE_ATTR_2 macro, following pattern set by
SENSOR_ATTR.  First it creates a new macro SENSOR_ATTR_2() which expands
to an initialization expression, then it uses that in SENSOR_DEVICE_ATTR_2,
which declares and initializes a struct sensor_device_attribute_2.
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

scx200_acb is only useful on a few Geode-based systems, and won't
compile on non-x86 systems due to the lack of asm/msr.h, as reported
by Andrew Morton. Thus, we should make that driver depend on X86.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

scx200_acb: Minimal documentation update
Signed-off-by: NBen Gardner <bgardner@wabtec.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

scx200_acb: Fix and speed up the poll loop
Signed-off-by: NBen Gardner <bgardner@wabtec.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

scx200_acb: Add support for the CS5535/CS5536
Signed-off-by: NBen Gardner <bgardner@wabtec.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

scx200_acb: remove use of lock_kernel()
Signed-off-by: NBen Gardner <bgardner@wabtec.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

scx200_acb: refactor/simplify code (no functional changes)
Signed-off-by: NBen Gardner <bgardner@wabtec.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

scx200_acb: debug log cleanup
Signed-off-by: NBen Gardner <bgardner@wabtec.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

scx200_acb: Whitespace and comment cleanup
Signed-off-by: NBen Gardner <bgardner@wabtec.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The patch below converts a few i2c semaphores to mutexes
Signed-off-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert the f71805f driver to use arrays of attributes. This shrinks the
compiled module from 12.0 kB to 9.6 kB. We certainly should do the same
for as many hardware monitoring drivers as possible.

This, together with a nice chip design by Fintek, makes this driver
very small, both in terms of number of lines of code and memory
consumption.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert individual sensors to sensor-attr arrays by each sensor type,
and initialize them in loops instead of long blocks of individual calls.
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch refactors SENSOR_DEVICE_ATTR macro.  First it creates a new
macro SENSOR_ATTR() which expands to an initialization expression, then
it uses that in SENSOR_DEVICE_ATTR, which declares and initializes a
struct sensor_device_attribute.

IOW, SENSOR_ATTR() imitates __ATTR() in include/linux/device.h.
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The biovec default mempool limit of 256 entries results in over 3MB of RAM
being permanently pinned, even on systems with only 128MB of RAM.  Since
mempool tries to allocate from the system pool first, it makes sense to
reduce the size of the mempool fallbacks to a more reasonable limit of 1-5
entries -- enough for the system to be able to make progress even under
load.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Acked-by: NJens Axboe <axboe@suse.de>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now CONFIG_DEBUG_INITDATA is in, initial percpu data
[__per_cpu_start,__per_cpu_end] can be declared as a redzone, and invalid
accesses after boot can be detected, at least for i386.

We can let non possible cpus percpu data point to this 'redzone' instead of
NULL .

NULL was not a good choice because part of [0..32768] memory may be
readable and invalid accesses may happen unnoticed.

If CONFIG_DEBUG_INITDATA is not defined, each non possible cpu points to
the initial percpu data (__per_cpu_offset[cpu] == 0), thus invalid accesses
wont be detected/crash.

This patch also moves __per_cpu_offset[] to read_mostly area to avoid false
sharing.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When we stop allocating percpu memory for not-possible CPUs we must not touch
the percpu data for not-possible CPUs at all.  The correct way of doing this
is to test cpu_possible() or to use for_each_cpu().

This patch is a kernel-wide sweep of all instances of NR_CPUS.  I found very
few instances of this bug, if any.  But the patch converts lots of open-coded
test to use the preferred helper macros.

Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: NKyle McMartin <kyle@parisc-linux.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Christian Zankel <chris@zankel.net>
Cc: Philippe Elie <phil.el@wanadoo.fr>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Jens Axboe <axboe@suse.de>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

percpu_data blindly allocates bootmem memory to store NR_CPUS instances of
cpudata, instead of allocating memory only for possible cpus.

This patch saves ram, allocating num_possible_cpus() (instead of NR_CPUS)
instances.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Acked-by: N"David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jens Axboe <axboe@suse.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Jens Axboe <axboe@suse.de>
Cc: Anton Blanchard <anton@samba.org>
Acked-by: NWilliam Irwin <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Eliminate a handful of cache references by keeping current in a register
instead of reloading (helps x86) and avoiding the overhead of a function
call.  Inlining eventpoll_init_file() saves 24 bytes.  Also reorder file
initialization to make writes occur more sequentially.
Signed-off-by: NBenjamin LaHaise <bcrl@linux.intel.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Without branch hints, the very unlikely chance of the loop repeating due to
cmpxchg failure is unrolled with gcc-4 that I have tested.

Improve this for architectures with a native cas/cmpxchg.  llsc archs
should try to implement this natively.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch makes two needlessly global structs static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Item from "2.6 should fix" list.
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch changes the code from:

	preempt_disable();
	for (;;) {
		...
		preempt_disable();
	}
to:
	for (;;) {
		preempt_disable();
		...
	}

which seems more clean to me and saves a couple of bytes for
each function.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Without the attached, the kernel complains about my BIOS' PNP tables. It
was ACKed before, but never merged:

http://marc.theaimsgroup.com/?l=linux-kernel&m=110237794007900&w=2

Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Attempt to fix the problem wherein people's oops reports scroll off the screen
due to repeated oopsing or to oopses on other CPUs.

If this happens the user can reboot with the `pause_on_oops=<seconds>' option.
It will allow the first oopsing CPU to print an oops record just a single
time.  Second oopsing attempts, or oopses on other CPUs will cause those CPUs
to enter a tight loop until the specified number of seconds have elapsed.

The patch implements the infrastructure generically in the expectation that
architectures other than x86 will find it useful.

Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes all occurances of _INLINE_ in the kernel.

With the exception of tty_flip.h, I've simply removed the inline's since
gcc should know best which functions to be inlined.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Declarations use struct notifier_block on both legs of the ifdef, so move the
notifier_block forward declaration outside the ifdef.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Consolidate all kernel bug printouts to begin with the "BUG: " string.
Makes it easier to find them in large bootup logs.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>