Pull ARM fixes from Russell King:
 "A set of ARM fixes:

   - fix an off-by-one error in the iommu DMA ops, which caused errors
     with a 4GiB size.

   - remove comments mentioning the non-existent CONFIG_CPU_ARM1020_CPU_IDLE
     macro.

   - remove useless CONFIG_CPU_ICACHE_STREAMING_DISABLE blocks, where
     this symbol never appeared in any Kconfig.

   - fix Feroceon code to cope with a previous change correctly (it
     incorrectly left an additional word in an assembly structure
     definition)

   - avoid a misleading IRQ affinity warning in the ARM PMU code for
     IRQs which are already affine to their CPUs.

   - fix the node name printed in the IRQ affinity warning"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8352/1: perf: Fix the pmu node name in warning message
  ARM: 8351/1: perf: don't warn about missing interrupt-affinity property for PPIs
  ARM: 8350/1: proc-feroceon: Fix feroceon_proc_info macro
  ARM: 8349/1: arch/arm/mm/proc-arm925.S: remove dead #ifdef block
  ARM: 8348/1: remove comments on CPU_ARM1020_CPU_IDLE
  ARM: 8347/1: dma-mapping: fix off-by-one check in arm_setup_iommu_dma_ops

Pull samsung fixes from Kukjin Kim:
 "Here is Samsung fixes for v4.1.  Since I've missed to send this via
  arm-soc tree before v4.1-rc3, so I'm sending this to you directly

   - fix commit ea08de16 ("ARM: dts: Add DISP1 power domain for
     exynos5420") which causes 'unhandled fault: imprecise external
     abort' error when PD turned off.  ("make DP a consumer of DISP1
     power domain")

   - fix 's3c-rtc' probe failure on Odriod-X2/U2/U3 boards ("add
     'rtc_src' clock to rtc node for source clock of rtc")

   - fix typo for 'cpu-crit-0' trip point on exynos5420/5440

   - fix S2R failure on exynos5250-snow due to card power of Marvell
     WiFi driver (suspend/resume) ("add keep-power-in-susped to WiFi
     SDIO node")"

* tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for exynos5250-snow
  ARM: dts: Fix typo in trip point temperature for exynos5420/5440
  ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boards
  ARM: dts: Make DP a consumer of DISP1 power domain on Exynos5420

Pull ARM SoC fixes from Arnd Bergmann:
 "A few patches have come up since the merge window.  The largest one is
  a rewrite of the PXA lubbock/mainstone IRQ handling.  This was already
  broken in 2011 by a change to the GPIO code and only noticed now.

  The other changes contained here are:

  MAINTAINERS file updates:

   - Ray Jui and Scott Branden are now co-maintainers for some of the
     mach-bcm chips, while Christian Daudt and Marc Carino have stepped
     down.

   - Andrew Victor is no longer maintaining at91.  Instead, Alexandre
     Belloni now becomes an official maintainer, after having done a
     bulk of the work for a while.

   - Baruch Siach, who added the mach-digicolor platform in 4.1 is now
     listed as maintainer

   - The git URL for mach-socfpga has changed

  Bug fixes:

   - Three bug fixes for new rockchip rk3288 code

   - A regression fix to make SD card support work on certain ux500
     boards

   - multiple smaller dts fixes for imx, omap, mvebu, and shmobile

   - a regression fiix for omap3 power consumption

   - a fix for regression in the ARM CCI bus driver

  Configuration changes:

   - more imx platforms are now enabled in multi_v7_defconfig"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  MAINTAINERS: add Conexant Digicolor machines entry
  MAINTAINERS: socfpga: update the git repo for SoCFPGA
  ARM: multi_v7_defconfig: Select more FSL SoCs
  MAINTAINERS: replace an AT91 maintainer
  drivers: CCI: fix used_mask init in validate_group()
  bus: omap_l3_noc: Fix master id address decoding for OMAP5
  bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instance
  ARM: dts: dra7: Fix efuse register size for ABB
  ARM: dts: am57xx-beagle-x15: Switch GPIO fan number
  ARM: dts: am57xx-beagle-x15: Switch UART mux pins
  ARM: dts: am437x-sk: reduce col-scan-delay-us
  ARM: dts: am437x-sk: fix for new newhaven display module revision
  ARM: dts: am57xx-beagle-x15: Fix RTC aliases
  ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x
  ARM: dts: omap3: Add #iommu-cells to isp and iva iommu
  ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO
  ARM: dts: OMAP3-N900: Add microphone bias voltages
  ARM: OMAP2+: Fix omap off idle power consumption creeping up
  MAINTAINERS: Update brcmstb entry
  MAINTAINERS: Remove Christian Daudt for mach-bcm
  ...

Pull user-namespace fix from Eric Biederman:
 "Eric Windish recently reported a really bug that allows mounting fresh
  copies of proc and sysfs when it really should not be allowed.  The
  code attempted to verify that proc and sysfs were fully visible but
  there is a test missing to ensure that the root of the filesystem is
  visible.  Doh!

  The following patch fixes that.

  This fixes a containment issue that the docker folks are seeing"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  mnt: Fix fs_fully_visible to verify the root directory is visible

Pull irq updates from Thomas Gleixner:
 "Two patches from the irq departement:

   - a simple fix to make dummy_irq_chip usable for wakeup scenarios

   - removal of the gic arch_extn hackery.  Now that all users are
     converted we really want to get rid of the interface so people wont
     come up with new use cases"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: gic: Drop support for gic_arch_extn
  genirq: Set IRQCHIP_SKIP_SET_WAKE flag for dummy_irq_chip

Pull timer fix from Thomas Gleixner:
 "A simple fix to actually shut down a detached device instead of
  keeping it active"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clockevents: Shutdown detached clockevent device

We cast away the volatile, but really, why make it volatile at all?
We already do a mb() inside the cpumask_empty() loop.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes a dumb bug in fs_fully_visible that allows proc or sys to
be mounted if there is a bind mount of part of /proc/ or /sys/ visible.

Cc: stable@vger.kernel.org
Reported-by: NEric Windisch <ewindisch@docker.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Pull vfs fixes from Al Viro:
 "A couple of fixes for bugs caught while digging in fs/namei.c.  The
  first one is this cycle regression, the second is 3.11 and later"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  path_openat(): fix double fput()
  namei: d_is_negative() should be checked before ->d_seq validation

path_openat() jumps to the wrong place after do_tmpfile() - it has
already done path_cleanup() (as part of path_lookupat() called by
do_tmpfile()), so doing that again can lead to double fput().

Cc: stable@vger.kernel.org	# v3.11+
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Fetching ->d_inode, verifying ->d_seq and finding d_is_negative() to
be true does *not* mean that inode we'd fetched had been NULL - that
holds only while ->d_seq is still unchanged.

Shift d_is_negative() checks into lookup_fast() prior to ->d_seq
verification.
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Tested-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull btrfs fix from Chris Mason:
 "When an arm user reported crashes near page_address(page) in my new
  code, it became clear that I can't be trusted with GFP masks.  Filipe
  beat me to the patch, and I'll just be in the corner with my dunce cap
  on"

* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix wrong mapping flags for free space inode

Pull device mapper fixes from Mike Snitzer:
 "Two additional fixes for changes introduced via DM during the 4.1
  merge window.

  The first reverts a dm-crypt change that wasn't correct.  The second
  fixes a device format regression that impacted userspace"

* tag 'dm-4.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  init: fix regression by supporting devices with major:minor:offset format
  Revert "dm crypt: fix deadlock when async crypto algorithm returns -EBUSY"

Pull block fixes from Jens Axboe:
 "A collection of fixes since the merge window;

   - fix for a double elevator module release, from Chao Yu.  Ancient bug.

   - the splice() MORE flag fix from Christophe Leroy.

   - a fix for NVMe, fixing a patch that went in in the merge window.
     From Keith.

   - two fixes for blk-mq CPU hotplug handling, from Ming Lei.

   - bdi vs blockdev lifetime fix from Neil Brown, fixing and oops in md.

   - two blk-mq fixes from Shaohua, fixing a race on queue stop and a
     bad merge issue with FUA writes.

   - division-by-zero fix for writeback from Tejun.

   - a block bounce page accounting fix, making sure we inc/dec after
     bouncing so that pre/post IO pages match up.  From Wang YanQing"

* 'for-linus' of git://git.kernel.dk/linux-block:
  splice: sendfile() at once fails for big files
  blk-mq: don't lose requests if a stopped queue restarts
  blk-mq: fix FUA request hang
  block: destroy bdi before blockdev is unregistered.
  block:bounce: fix call inc_|dec_zone_page_state on different pages confuse value of NR_BOUNCE
  elevator: fix double release of elevator module
  writeback: use |1 instead of +1 to protect against div by zero
  blk-mq: fix CPU hotplug handling
  blk-mq: fix race between timeout and CPU hotplug
  NVMe: Fix VPD B0 max sectors translation

Pull GPIO fixes from Linus Walleij:
 "Here is a bunch of GPIO fixes that I collected since -rc1, nothing
  controversial, nothing special:

   - fix a memory leak for GPIO hotplug.

   - fix a signedness bug in the ACPI GPIO pin validation.

   - driver fixes: Qualcomm SPMI and OMAP MPUIO IRQ issues"

* tag 'gpio-v4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: omap: Fix regression for MPUIO interrupts
  gpio: sysfs: fix memory leaks and device hotplug
  pinctrl: qcom-spmi-gpio: Fix input value report
  pinctrl: qcom-spmi-gpio: Fix output type configuration
  gpiolib: change gpio pin from unsigned to signed in acpi callback

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Don't access RPMB partitions for normal read/write
   - Fix hibernation restore sequence

  MMC host:
   - dw_mmc: Fix card detection for non removable cards
   - dw_mmc: Fix sglist issue in 32-bit mode
   - sh_mmcif: Fix timeout value for command request"

* tag 'mmc-4.1-rc2' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: dw_mmc: dw_mci_get_cd check MMC_CAP_NONREMOVABLE
  mmc: dw_mmc: init desc in dw_mci_idmac_init
  mmc: card: Don't access RPMB partitions for normal read/write
  mmc: sh_mmcif: Fix timeout value for command request
  mmc: core: add missing pm event in mmc_pm_notify to fix hib restore

Merge tag 'trace-fixes-v4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "The newly added ftrace_print_array_seq() function had a bug in it.
  Luckily, the only user of it didn't make the 4.1 merge window.

  But the helper function should be fixed before 4.2 when the users
  start coming in"

* tag 'trace-fixes-v4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Make ftrace_print_array_seq compute buf_len

The Marvell mwifiex driver prevents the system to enter into a suspend
state if the card power is not preserved during a suspend/resume cycle.

So Suspend-to-RAM and Suspend-to-idle are failing on Exynos5250 Snow.

Add the keep-power-in-suspend Power Management property to the SDIO/MMC
node so the mwifiex suspend handler doesn't fail and the system is able
to enter into a suspend state.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

Remove the extra zero in the "cpu-crit-0" trip point for exynos5420
and exynos5440.
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

The Exynos4412 SoC has a s3c6410 RTC where the source clock
is now a mandatory property.
This patch fixes probe failure of s3c-rtc on Odroid-X2/U2/U3 boards.
Signed-off-by: NMarkus Reichl <m.reichl@fivetechno.de>
Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

Commit ea08de16 ("ARM: dts: Add DISP1 power domain for exynos5420")
added a device node for the Exynos5420 DISP1 power domain but dit not
make the DP controller a consumer of that power domain.

This causes an "Unhandled fault: imprecise external abort" error if the
exynos-dp driver tries to access the DP controller registers and the PD
was turned off. This lead to a kernel panic and a complete system hang.

Make the DP controller device node a consumer of the DISP1 power domain
to ensure that the PD is turned on when the exynos-dp driver is probed.

Fixes: ea08de16 ("ARM: dts: Add DISP1 power domain for exynos5420")
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

This adds Baruch as the maintainer for the Digicolor platform.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The git tree at rocketboards.org is going away. Update the entry to reflect
the address of the new location. Also add an entry for all the socfpga_*
dts files.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

When non-removable is used for emmc,  MMC_CAP_NONREMOVABLE should
also be checked, otherwise detection fail since present=0
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Set 0 to des1 in 32bit case.
Otherwise the random value of des1 will be used in
dw_mci_translate_sglist: IDMAC_SET_BUFFER1_SIZE(desc, length)
Signed-off-by: NFei Wang <w.f@huawei.com>
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Pull power management and ACPI fixes from Rafael Wysocki:
 "These include three regression fixes (PCI resources management,
  ACPI/PNP device enumeration, ACPI SBS on MacBook) and two ACPI
  documentation fixes related to GPIO.

  Specifics:

   - Fix for a PCI resources management regression introduced during the
     4.0 cycle and related to the handling of ACPI resources'
     Producer/Consumer flags that turn out to be useless (Jiang Liu)

   - Fix for a MacBook regression related to the Smart Battery Subsystem
     (SBS) driver causing various problems (stalls on boot, failure to
     detect or report battery) to happen and introduced during the 3.18
     cycle (Chris Bainbridge)

   - Fix for an ACPI/PNP device enumeration regression introduced during
     the 3.16 cycle caused by failing to include two PNP device IDs into
     the list of IDs that PNP device objects need to be created for
     (Witold Szczeponik)

   - Fixes for two minor mistakes in the ACPI GPIO properties
     documentation (Antonio Ospite, Rafael J Wysocki)"

* tag 'pm+acpi-4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PNP: add two IDs to list for PNPACPI device enumeration
  ACPI / documentation: Fix ambiguity in the GPIO properties document
  ACPI / documentation: fix a sentence about GPIO resources
  ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook
  x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus

* acpi-resources:
  x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus

* acpi-battery:
  ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook

* acpi-doc:
  ACPI / documentation: Fix ambiguity in the GPIO properties document
  ACPI / documentation: fix a sentence about GPIO resources

* acpi-pnp:
  ACPI / PNP: add two IDs to list for PNPACPI device enumeration

Pull f2fs fixes from Jaegeuk Kim:
 "Fix a performance regression and a bug"

* tag 'for-f2fs-4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: fix wrong error hanlder in f2fs_follow_link
  Revert "f2fs: enhance multi-threads performance"

Select IMX50, IMX6SX and LS1021A SoC support.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

As some help is needed from an active maintainer, replace Andrew Victor
by Alexandre Belloni in the ARM/Atmel MAINTAINERS' entry (aka AT91).
Add an entry to the CREDITS file.

Thanks Andrew for the great role you played during the early days of this
product family.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NAndrew Victor <linux@maxim.org.za>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Currently in validate_group(), there is a static initializer
for fake_pmu.used_mask which is based on CPU_BITS_NONE but
the used_mask array size is based on CCI_PMU_MAX_HW_EVENTS.
CCI_PMU_MAX_HW_EVENTS is not based on NR_CPUS, so CPU_BITS_NONE
is not correct and will cause a build failure if NR_CPUS
is set high enough to make CPU_BITS_NONE larger than used_mask.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NMark Salter <msalter@redhat.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'stericsson-fixes-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes

Merge "Ux500 fixes" from Linus Walleij:

This fixes an MMC/SD configuration issue present for some time
in the Ux500 DT but triggered by proper error handling in v4.1-rc1.

* tag 'stericsson-fixes-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: Enable GPIO regulator for SD-card for snowball
  ARM: ux500: Enable GPIO regulator for SD-card for HREF boards
  ARM: ux500: Move GPIO regulator for SD-card into board DTSs

Merge tag 'renesas-fixes-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

Merge "Renesas ARM Based SoC Fixes for v4.1" from Simon Horman:

* Fix adv7511 IRQ sensing on koelsch board

* tag 'renesas-fixes-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: koelsch: Fix adv7511 IRQ sensing

Merge tag 'omap-for-v4.1/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Merge "omap fixes against v4.1-rc1" from Tony Lindgren:

Fixes for omaps, mostly a fix for power power consumption
creeping up during idle, and two l3-noc device fixes:

- Fix power consumption creeping up with I2C4 staying on
- Fix n900 microphone bias voltages
- Fix dra7 l3-noc for host clock
- Fix omap5 l3-noc id address decoding

The rest are all just minor dts fixes:

- Fix changed EXTCON_USB_GPIO_USB in defconfig
- Fix missing isp and iva #iommu-cells property
- Various beagle x15 dts fixes for pre-production changes
- Fix am437x-sk display dts entries

* tag 'omap-for-v4.1/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: omap_l3_noc: Fix master id address decoding for OMAP5
  bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instance
  ARM: dts: dra7: Fix efuse register size for ABB
  ARM: dts: am57xx-beagle-x15: Switch GPIO fan number
  ARM: dts: am57xx-beagle-x15: Switch UART mux pins
  ARM: dts: am437x-sk: reduce col-scan-delay-us
  ARM: dts: am437x-sk: fix for new newhaven display module revision
  ARM: dts: am57xx-beagle-x15: Fix RTC aliases
  ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x
  ARM: dts: omap3: Add #iommu-cells to isp and iva iommu
  ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO
  ARM: dts: OMAP3-N900: Add microphone bias voltages
  ARM: OMAP2+: Fix omap off idle power consumption creeping up

Merge "MAINTAINERS update for Broadcom SoCs for 4.1 #2" from Florian Fainelli:

This pull request contains 3 changes to the MAINTAINERS file for Broadcom SoCs:

- add Ray and Scott for mach-bcm
- remove Christian for mach-bcm
- remove Marc for brcmstb

* tag 'arm-soc/for-4.1/maintainers' of http://github.com/broadcom/stblinux:
  MAINTAINERS: Update brcmstb entry
  MAINTAINERS: Remove Christian Daudt for mach-bcm
  MAINTAINERS: Update mach-bcm maintainers list

Pull "mvebu fix for 4.1" from Gregory CLEMENT:

Disable the unused internal RTC in the dts of the OpenBlock AX3

* tag 'mvebu-fixes-4.1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: armada-xp-openblocks-ax3-4: Disable internal RTC

Merged "ARM: pxa: fixes for v4.1-rc2" from Robert Jarzmik:

These fixes reenable the lubbock(pxa25x) and mainstone(pxa27x)
platforms, which were broken since the gpio handling was
converted to a driver, and the interrupt ordering broke the
external interrupts of these systems.

* tag 'fixes-for-v4.1-rc2' of https://github.com/rjarzmik/linux:
  ARM: pxa: lubbock: use new pxa_cplds driver
  ARM: pxa: mainstone: use new pxa_cplds driver
  ARM: pxa: pxa_cplds: add lubbock and mainstone IO

Merge tag 'imx-fixes-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

Pull "The i.MX fixes for 4.1" from Shawn Guo:

 - A couple of imx23-olinuxino device tree fixes regarding to LED GPIO
   polarity and USB dr_mode setting
 - One i.MX28 device tree fix on AUART4 TX-DMA interrupt name
 - Add missing pwm-cells to PWM4 for i.MX25 device tree
 - Fix imx6q-phytec device tree to get correct USB VBUS control
 - Drop invalid pinctrl-assert-gpios property from imx6qdl-sabreauto
   device tree, which was sneaked in from vendor device tree
 - One fix on Wolfram's broken email address

* tag 'imx-fixes-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6qdl-sabreauto: remove pinctrl-assert-gpios
  ARM: dts: imx28: Fix AUART4 TX-DMA interrupt name
  ARM: dts: imx25: Add #pwm-cells to pwm4
  ARM: dts: imx6: phyFLEX: USB VBUS control is active-high
  ARM: mach-imx: devices: platform-sdhci-esdhc-imx: fix broken email address
  ARM: dts: imx23-olinuxino: Fix dr_mode of usb0
  ARM: dts: imx23-olinuxino: Fix polarity of LED GPIO

Merge tag 'v4.1-rockchip-socfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes

Merge "ARM: rockchip: some soc-level fixes for 4.1" from Heiko Stübner:

Two fixes from Chris Zhong, fixing some suspend oddities.
And I've given up on the timer7 issue. While I initially thought
devices would either have both the grave mmu issue requiring a uboot
update and the timer7 issue or none, it looks like in all units in the
field the mmu issue got fixed while the timer7 issue stayed on.
So instead of making everybody wanting to use mainline jump through a
hoop just make sure timer7 is on on boot before we init the arch-timer.

* tag 'v4.1-rockchip-socfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  rockchip: make sure timer7 is enabled on rk3288 platforms
  ARM: rockchip: fix undefined instruction of reset_ctrl_regs
  ARM: rockchip: disable dapswjdp during suspend

Pull pin control fixes from Linus Walleij:
 "Here is a smallish set of pin control fixes for the v4.1 cycle,
  collected the last two weeks:

   - fix a real nasty legacy bug that has screwed up the protection of
     adding pinctrl maps dynamically.  Normally this didn't happen so
     much but Dough Anderson ran into it and fixed it, kudos!

  - minor driver fixes for Qualcomm spmi, mediatek and Marvell drivers"

* tag 'pinctrl-v4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: Don't just pretend to protect pinctrl_maps, do it for real
  pinctrl: mediatek: mtk-common: initialize unmask
  pinctrl: qcom-spmi-mpp: Fix input value report
  pinctrl: qcom-spmi: Fix pin direction configuration
  pinctrl: mvebu: Fix mapping of pin 63 (gpo -> gpio)