HDA Intel driver
Patch enables unsolicited responses on the HDA controller. Without
the UREN bit set, the controller will not place unsolicited responses
in a RIRB.
Signed-off-by: NMatt <matt@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

USB generic driver
MOTU builds other USB MIDI interfaces with the same product ID as the
FastLane, so we have to check the bDeviceSubClass field to differentiate
between them.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Rename the protocol used by the MOTU FastLane to 'raw' because it might
be useful with other devices, and there are other MOTU interfaces that
do not use this protocol.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
This patch enables the boot commands to activate high speed mode (and
associated sample formats like 8 channels with 24 bits at 96 kHz) on the
SB Audigy 2 NX.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

VIA82xx driver
Reporter: Marko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

USB generic driver
Add a quirk for the Yamaha USB MIDI device with USB ID 0x103d.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Documentation,ARM,/arm/Makefile,ARM PXA2XX driver
Added ARM PXA2xx AC97 driver by Nicolas Pitre
(moved from alsa-driver tree).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,SPARC,/sparc/Makefile
Add the DBRI driver on Sparcs by Martin Habets <mhabets@users.sourceforge.net>
(moved from alsa-driver tree).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

SPARC
Added simple help texts to Kconfig of Sparc sound drivers.
(Better texts are appreciated :)
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Maestro3 driver
- Clean up maestro3 code
- Use msleep()
- Don't enable hw-vol irq when not defined
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Intel8x0 driver,AC97 Codec
Fix resume of intel8x0 driver.  The ac97 codec didn't restore some registers
properly, and the restore of ICH4 SPDIF and SDIN settings was missing.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

CMIPCI driver
Added 'Mic Boost Capture Switch' and 'Phone' switches.
The existing playback switch is renamed as 'Mic Boost Playback Switch'.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Digigram VX Pocket driver
Removed unused files (dropped by the last change).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,PCMCIA Kconfig,Digigram VX Pocket driver
- Fixed Oops with request_firmware()
- Detect the card type in runtime (vxpoocket v2 or 440)
- snd-vxp440 driver is merged to snd-vxpocket
- Clean up the code
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Use the new kstrdup() function instead of in-house one.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALSA sequencer
Add the missing snd-seq-midi-emul to SND_GUS_SYNTH list.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALSA Core
This patch changes, adds and remove some comments, which will
make now more sense and fit on a 80-char line. It also changes
the order of snd_power_wait() to make the file more readable.
It removes the device.c comment in front of _snd_minor,
cause snd_minor has nothing to do with device.c.
The both typos in the kernel-docs were corrected too.
Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALSA Core
Both typos were in the kerneldocs.

I splitted the snd_assert() calls in one-expression-per-call for better
debugging.
Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Added the model entry for Acer APFV.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,HDA Codec driver
- Added a new '6stack' model for ALC880.
- Fixed the typo in 6stack-digout model name.
- Added description for missing models in ALSA-Configuration.txt.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ATIIXP-modem driver
I didn't actually test whether the modem works, but at least the driver
loads and initializes fine.  Please consider inclusion.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Trident driver
Shut up compile warnings about uninitialized variables.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Adds resume support to the SigmaTel HDA patch. Please apply.
Signed-off-by: NMatt <matt@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Adds 6/8 channel support to the SigmaTel HDA patch. Please apply.
Signed-off-by: NMatt <matt@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

USB generic driver
On the SB Audigy 2 NX, capturing with sample rates that are not a
multiple of 48 kHz does not seem to work, so disable it.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Add support for endpoints with bInterval > 1, and decoding of the
wMaxPacketSize field of high-speed endpoints.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

HDA Codec driver
- Fixed oops with ALC880 auto-config mode
- Fixed a wrong config table entry for ALC880
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AK4114 receiver
- wake_up(&runtime->sleep) is already called in snd_pcm_post_stop()
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If we haven't configured the qla24xx driver, then the Makefile shouldn't
do it for us.

This also means that we can avoid the unnecessary selection of FC_ATTRS.

Debugged by James Bottomley

My fairly ordinary x86 test box gets stuck during reboot on the
wait_for_completion() in ide_do_drive_cmd():
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>