We only reach transport_complete_task once per task, so the test and set on
task_error_status is never going to have an effect.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This reorganized the headers under include/target into:

 - target_core_base.h stays as is with all target-wide data stuctures and defines
 - target_core_backend.h contains the whole interface to I/O backends
 - target_core_fabric.h contains the whole interface to fabric modules

Except for those only the various configfs macro headers stay around.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Some are never used, some are set but never read, dev_hoq_count is
incremented and decremented, but never read.
Signed-off-by: NJoern Engel <joern@logfs.org>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

And use a SCF_BIDI flag instead.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

And use a SCF_FUA flag instead.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We never walk ordered_cmd_list in the se_device, so remove all code related
to supporting it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We already have a perfectly valid se_device pointer in the command, so
remove the mostly useless duplicates.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Convert to unsigned bit fields for active I/O shutdown fields.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number
of locations and addresses cases where transport_generic_request_failure()
was returning the incorrect sense upon CHECK_CONDITION status after the
v3.1 converson to use errno return codes.

This includes the conversion of transport_generic_request_failure() to
process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT
before calling transport_send_check_condition_and_sense() to queue up
response status.  It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy
usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response
for these cases.

transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend
SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have
all been updated to set se_cmd->scsi_sense_reason and return errno codes
universally upon failure.  This includes cmd->scsi_sense_reason assignment
in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code.

Finally it updates fabric modules to remove the legacy usage, and for
TFO->new_cmd_map() callers forwards return values outside of fabric code.
iscsi-target has also been updated to remove a handful of special cases
related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending()

(v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from
     transport_generic_new_cmd, and re-add missing task->task_error_status
     assignment in transport_complete_task)

Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

All ->execute_task instances now need to complete the I/O explicitly,
which can either happen synchronously or asynchronously.

Note that a lot of the CDB emulations appear to return success even if
some lowlevel operations failed.  Given that this is an existing issue
this patch doesn't change that fact.

(nab: Adding missing switch breaks in PR-IN + PR_OUT)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We want to be able to handle all CDBs through it and remove hacks like
always using the first task in a CDB in target_report_luns.

Also rename the callback to ->execute_task to better describe its use.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds the initial pieces of generic active I/O shutdown logic.
This is intended to be a 'opt-in' feature for fabric modules that
includes the following functions to provide a mechinism for fabric
modules to track se_cmd via se_session->sess_cmd_list:

*) target_get_sess_cmd() - Add se_cmd to sess->sess_cmd_list, called
   from fabric module incoming I/O path.
*) target_put_sess_cmd() - Check for completion or drop se_cmd from
   ->sess_cmd_list
*) target_splice_sess_cmd_list() - Splice active I/O list from
   ->sess_cmd_list to ->sess_wait_list, can called with HW fabric
   lock held.
*) target_wait_for_sess_cmds() - Walk ->sess_wait_list waiting on
   individual ->cmd_wait_comp.  Optional transport_wait_for_tasks()
   call.

target_splice_sess_cmd_list() is allowed to be called under HW fabric
lock, and performs the splice into se_sess->sess_wait_list and set
se_cmd->cmd_wait_set.  Then target_wait_for_sess_cmds() walks the list
waiting for individual target_put_sess_cmd() fabric callbacks to
complete.

It also adds TFO->check_release_cmd() to split the completion and memory
release calls, where a fabric module uses target_put_sess_cmd() to check
for I/O completion during session shutdown.  This is currently pushed out
into fabric modules as current fabric code may sleep here waiting for
TFO->check_stop_free() to complete in main response path, and because
target_wait_for_sess_cmds() calling TFO->release_cmd() to free fabric
descriptor memory directly.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas A. Bellinger <nab@linux-iscsi.org>

This patch drops TRANSPORT_FREE_CMD_INTR usage from target core, which
includes the removal of transport_generic_free_cmd_intr() symbol,
TRANSPORT_FREE_CMD_INTR usage in transport_processing_thread(), and
special case LUN_RESET handling to skip TRANSPORT_FREE_CMD_INTR processing
in core_tmr_drain_cmd_list().  We now expect that fabric modules will
use an internal workqueue to provide process context when releasing
se_cmd descriptor resources via transport_generic_free_cmd().
Reported-by: NChristoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Madhuranath Iyengar <mni@risingtidesystems.com>
Signed-off-by: NNicholas Bellinger <nab@risingtidesystems.com>

This patch removes the legacy usage of se_task->task_timer and associated
infrastructure that originally was used as a way to help manage buggy backend
SCSI LLDs that in certain cases would never return back an outstanding task.

This includes the removal of target_complete_timeout_work(), timeout logic
from transport_complete_task(), transport_task_timeout_handler(),
transport_start_task_timer(), the per device task_timeout configfs attribute,
and all task_timeout associated structure members and defines in
target_core_base.h

This is being removed in preparation to make transport_complete_task() run
in lock-less mode.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch converts target-core to use se_cmd->t_transport_sent instead of
a duplicated se_cmd->transport_sent member in a handful of locations.
It also updates iscsi_target to properly use ->t_transport_sent instead of
it's own iscsi_cmd_t->transport_sent value that was not being assigned.
Reported-by: NChristoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This field is never used given that BIDI handling happens at the
command and not the task level.  Remove it and the dead code in
pscsi that tries to work on it.

It also prevents pSCSI passthrough for the two currently enabled BIDI
commands now that task->task_sg_bidi support has been removed.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Instead of abusing the target processing thread for offloading I/O
completion in the backends to user context add a new workqueue.  This means
completions can be processed as fast as available CPU time allows it,
including in parallel with other completions and more importantly I/O
submission or QUEUE FULL retries.  This should give much better performance
especially on loaded systems.

As a fallout we can merge all the completed states into a single
one.

On the downside this change complicates lun reset handling a bit by
requiring us to cancel a work item only for those states that have it
initialized.  The alternative would be to either always initialize the work
item to a dummy handler, or always use the same handler and do a switch on
the state. The long term solution will be a flag that says that the command
has an initialized work item, but that's only going to be useful once we
have more users.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We never check for this state, and it makes testing for a completed
state much harder given that it overrides the existing state.

Also remove the unused deferred_t_state which is related to it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We never queue an command with this state, and only set it in a completely
bogus place in tcm_fc.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Currently we stop the timers for all tasks in a command fairly late during
I/O completion, which is fairly pointless and requires all kinds of safety
checks.

Instead delete pending timers early on in transport_complete_task, thus
ensuring no new timers firest after that.  We take t_state_lock a bit later
in that function thus making sure currenly running timers are out of the
criticial section.  To be completely sure the timer has finished we also
add another del_timer_sync call when freeing the task.

This also allows removing TF_TIMER_RUNNING as it would be equivalent
to TF_ACTIVE now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

TF_TIMER_STOP is useless as it only helps to mitigate a tiny race during
deleting the timer.  But given that we have cleared TF_ACTIVE at this point
we already have another mitigation a few lines down the function.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Add a new boolean at_head parameter to transport_add_cmd_to_queue and thus
obsolete the SCF_EMULATE_QUEUE_FULL flag.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Remove the need for the transport_qf_callback callback by making
sure we have specific states with specific handlers for the two
queue full cases.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Add a switch statement implementing the CDB LBA/len update directly
in target_get_task_cdb and remove the old ->transport_split_cdb
callback and all its implementations.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Rearrange the fields in se_task to avoid holes.  Also increase the
flags field to 16 bits as we have the space for it, and this makes
adding new flags safer.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This is a squashed version of the following unnecessary se_task structure
member removal patches:

target: remove the task_execute_queue field in se_task

    Instead of using a separate flag we can simply do list_emptry checks
    on t_execute_list if we make sure to always use list_del_init to remove
    a task from the list.  Also factor some duplicate code into a new
    __transport_remove_task_from_execute_queue helper.

target: remove the read-only task_no field in se_task

    The task_no field never was initialized and only used in debug printks,
    so kill it.

target: remove the task_padded_sg field in se_task

    This field is only check in one place and not actually needed there.

    Rationale:
    - transport_do_task_sg_chain asserts that we have task_sg_chaining
      set early on
    - we only make use of the sg_prev_nents field we calculate based on it
      if there is another sg list that gets chained onto this one, which
      never happens for the last (or only) task.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Replace various atomic_t variables that were mostly under t_state_lock
with new flags in task_flags.  Note that the execution error path
didn't take t_state_lock before, so add it there.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This is a squashed version of the following se_task cleanup patches:

    target: remove the unused task_state_flags field in se_task
    target: remove the unused se_obj_ptr field in se_task
    target: remove the se_dev field in se_task
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This is a squashed version of the following target_core_base.h
cleanup patches:

    target: remove the unused SHUTDOWN_SIGS defintion
    target: remove unused se_mem leftovers
    target: remove the unused map_func_t typedef
    target: move TRANSPORT_IOV_DATA_BUFFER to the iscsi-specific code
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch converts se_cmd->transport_wait_for_tasks(se_cmd, 1) usage to use
transport_generic_free_cmd() directly in target-core and iscsi-target fabric
usage.  The includes:

*) Removal of the optional transport_generic_free_cmd() call from within
   transport_generic_wait_for_tasks()
*) Usage of existing SCF_SUPPORTED_SAM_OPCODE to determine when
   transport_generic_wait_for_tasks() processing may occur instead of
   checking se_cmd->transport_wait_for_tasks()
*) Move transport_generic_wait_for_tasks() call ahead of core_dec_lacl_count()
   and transport_lun_remove_cmd() in transport_generic_free_cmd() to follow
   existing logic for iscsi-target w/ se_cmd->transport_wait_for_tasks(se_cmd, 1)
*) Removal of se_cmd->transport_wait_for_tasks() function pointer
*) Rename transport_generic_wait_for_tasks() -> transport_wait_for_tasks(), and
   add docbook comment.
*) Add EXPORT_SYMBOL for transport_wait_for_tasks()

For the case in iscsi_target_erl2.c:iscsit_prepare_cmds_for_realligance()
where se_cmd->transport_wait_for_tasks(se_cmd, 0) is called, this patch
adds a direct call to transport_wait_for_tasks().

(hch: Fix transport_generic_free_cmd() usage in iscsit_release_commands_from_conn)
(nab: Add patch: Ensure that TMRs hit wait_for_tasks logic during release)
Reported-by: NChristoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch removes the unnecessary session_reinstatement parameter from
se_cmd->transport_wait_for_tasks(), logic in transport_generic_wait_for_tasks,
and usage within iscsi-target code.

This also includes the removal of the 'bool' return from transport_put_cmd() +
transport_generic_free_cmd() that is no longer necessary.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch bumps the target core version to v4.1.0-rc1 now that we are
in sync with upstream lio-core-2.6.git/master
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds the default 'Unrestricted reordering allowed' for SCSI
control mode page QUEUE ALGORITHM MODIFIER on a per se_device basis in
target_modesense_control() following spc4r23.  This includes a new
emuluate_rest_reord configfs attribute that currently (only) accepts
zero to signal 'Unrestricted reordering allowed' in control mode page
usage by the backend target device.
Reported-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@risingtidesystems.com>

This patch contains the squashed version of forth round series cleanups
from Andy and Christoph following the post heavy lifting in the preceeding:
'Eliminate usage of struct se_mem' and 'Make all control CDBs scatter-gather'
changes.  This also includes a conversion of target core and the v3.0
mainline fabric modules (loopback and tcm_fc) to use pr_debug and the
CONFIG_DYNAMIC_DEBUG infrastructure!

These have been squashed into this third and final round for v3.1.

target: Remove ifdeffed code in t_g_process_write
target: Remove direct ramdisk code
target: Rename task_sg_num to task_sg_nents
target: Remove custom debug macros for pr_debug. Use pr_err().
target: Remove custom debug macros in mainline fabrics
target: Set WSNZ=1 in block limits VPD. Abort if WRITE_SAME sectors = 0
target: Remove transport do_se_mem_map callback
target: Further simplify transport_free_pages
target: Redo task allocation return value handling
target: Remove extra parentheses
target: change alloc_task call to take *cdb, not *cmd

(nab: Fix bogus struct file assignments in fd_do_readv and fd_do_writev)
Signed-off-by: NAndy Grover <agrover@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Both backstores and fabrics use arrays of struct scatterlist to describe
data buffers. However TCM used struct se_mems, basically a linked list
of scatterlist entries. We are able to simplify the code by eliminating
this intermediate data structure and just using struct scatterlist[]
throughout.

Also, moved attachment of task to cmd out of transport_generic_get_task
and into allocate_control_task and allocate_data_tasks. The reasoning
is that it's nonintuitive that get_task should automatically add it to
the cmd's task list -- it should just return an allocated, initialized
task. That's all it should do, based on the function's name, so either the
function shouldn't do it, or the name should change to encapsulate the
entire essence of what it does.

(nab: Fix compile warnings in tcm_fc, and make transport_kmap_first_data_page
 honor sg->offset for SGLs from contigious memory with TCM_Loop, and
 fix control se_cmd descriptor memory leak)
Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Since sectors is not modified, it's more straightforward to do this.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>