- 28 5月, 2013 1 次提交
-
-
由 Christian Ohm 提交于
This mouse is sold as Sharkoon Drakonia and Perixx MX-2000 and reports a too high usage maximum and logical maximum. This driver fixes the report descriptor so those values don't exceed HID_MAX_USAGES. Signed-off-by: NChristian Ohm <chr.ohm@gmx.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 29 4月, 2013 1 次提交
-
-
由 Adam Jiang 提交于
This patche adds PID of Japanese Natual Ergonomic Keyboard 4000. HID NE4K driver depends on this PID for determining its quirks. F14-F18 keys would not work without the patch. Signed-off-by: NAdam Jiang <jiang.adam@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 4月, 2013 1 次提交
-
-
由 Benjamin Tissoires 提交于
This driver was originally written by James McKenzie, updated by Greg Kroah-Hartman, further updated by Bastien Nocera, with suspend support added. I ported it to the HID subsystem, in order to simplify it a litle and allow lirc to use it through hiddev. More recent versions of the IR receiver are also supported through a patch by Alex Karpenko. The patch also adds support for the 2nd and 5th generation of the controller, and the menu key on newer brushed metal remotes. Tested-by: NFabien André <fabien.andre@gmail.com> Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 04 4月, 2013 1 次提交
-
-
由 David Herrmann 提交于
This adds the 2nd generation Wii Remote IDs. They have a different Bluetooth chipset (CSR instead of Broadcom) and are more restrictive in what they accept as input. Hence, you need up-to-date BlueZ and Bluetooth HIDP modules to use these devices. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 29 3月, 2013 1 次提交
-
-
由 Alexey Klimov 提交于
This patch reverts commit 0322bd39 ("usb hid quirks for Masterkit MA901 usb radio") and adds checks in hid_ignore() for Masterkit MA901 usb radio device. This usb radio device shares USB ID with many Atmel V-USB (and probably other) devices so patch sorts things out by checking name, vendor, product of hid device. Signed-off-by: NAlexey Klimov <klimov.linux@gmail.com> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 18 3月, 2013 2 次提交
-
-
由 Josh Boyer 提交于
This keyboard backlight device causes a 10 second delay to boot. Add it to the quirk list with HID_QUIRK_NO_INIT_REPORTS. This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=907221 Cc: stable@vger.kernel.org Signed-off-by: NJosh Boyer <jwboyer@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Josh Boyer 提交于
This device needs to be added to the quirks list with HID_QUIRK_NO_INIT_REPORTS, otherwise it causes 10 seconds timeout during report initialization. This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=806587 Cc: stable@vger.kernel.org Signed-off-by: NJosh Boyer <jwboyer@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 14 3月, 2013 2 次提交
-
-
由 Stefan Achatz 提交于
Extending isku module with one additional and one changed sysfs attr. IskuFX has larger light sysfs attr. Made the code size tolerant so both devices can be handled. Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Stefan Achatz 提交于
Userland-tools can already be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 20 2月, 2013 1 次提交
-
-
由 Simon Wood 提交于
Reorders a couple of device IDs (Logitech controllers) to ensure that they are in hexidecimal order. Signed-off-by: NSimon Wood <simon@mungewell.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 2月, 2013 1 次提交
-
-
由 Vivien Didelot 提交于
The ThingM blink(1) is an open source hardware USB RGB LED. It contains an internal EEPROM, allowing to configure up to 12 light patterns. A light pattern is a RGB color plus a fade time. This driver registers a LED class instance with additional sysfs attributes to support basic functions such as setting RGB colors, fade and playing. Other functions are still accessible through the hidraw interface. At this time, the only documentation for the device is the firmware source code from ThingM, plus a few schematics. They are available at: https://github.com/todbot/blink1 This patch is version 3. It updates the name of the source file, the driver and the led sysfs entry, according to comments from Jiri Kosina and Simon Wood. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 18 2月, 2013 1 次提交
-
-
由 Ian Abbott 提交于
These are simple data acquistion boards, not HID devices and are handled by the vmk80xx comedi driver. At least one of them (10cf:5500) misidentifies itself as a HID in its USB interface descriptor. Ignore all these devices. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 05 2月, 2013 1 次提交
-
-
由 Benjamin Tissoires 提交于
This device is the worst device I saw. It keeps TipSwitch and InRange at 1 for fingers that are not touching the panel. The solution is to rely on the field ContactCount, which is accurate as the correct information are packed at the begining of the frame. Unfortunately, CountactCount is most of the time at the end of the report. The solution is to pick it when we have the whole report in raw_event. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 31 1月, 2013 1 次提交
-
-
由 Simon Wood 提交于
Add support the SRW-S1 by patching HID descriptor to read axis as Generic Desktop X, Y and Z (rather than Usage page being 'Simulation'). Signed-off-by: NSimon Wood <simon@mungewell.org> Tested-by: NJohn Murphy <rosegardener@freeode.co.uk> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 17 1月, 2013 1 次提交
-
-
由 Michael Karcher 提交于
Add support for another gamepad to the hid-pl driver. The "color rumble pad P580" marketed using the "Saitek" brand in Germany, and using a USB Vendor ID attributed to "Jess" seems to be electronically identical to the 4-field variant of the "Green Asia" gamepad. The pad has been tested to support rumble strengths up to 255, not just 127. Signed-off-by: NMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 16 1月, 2013 1 次提交
-
-
Some Vaio desktop computers, among them the VGC-LN51JGB multimedia PC, have a RF receiver, multi-interface USB device 054c:0374, that is used to connect a wireless keyboard and a wireless mouse. The keyboard works flawlessly, but the mouse (VGP-WMS3 in my case) does not seem to be generating any pointer events. The problem is that the mouse pointer is wrongly declared as a constant non-data variable in the report descriptor (see lsusb and usbhid-dump output below), with the consequence that it is ignored by the HID code. Add this device to the have-special-driver list and fix up the report descriptor in the Sony-specific driver which happens to already have a fixup for a similar firmware bug. # lsusb -vd 054C:0374 Bus 003 Device 002: ID 054c:0374 Sony Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x054c Sony Corp. idProduct 0x0374 iSerial 0 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 2 RF Receiver [...] Report Descriptor: (length is 100) [...] Item(Global): Usage Page, data= [ 0x01 ] 1 Generic Desktop Controls Item(Local ): Usage, data= [ 0x30 ] 48 Direction-X Item(Local ): Usage, data= [ 0x31 ] 49 Direction-Y Item(Global): Report Count, data= [ 0x02 ] 2 Item(Global): Report Size, data= [ 0x08 ] 8 Item(Global): Logical Minimum, data= [ 0x81 ] 129 Item(Global): Logical Maximum, data= [ 0x7f ] 127 Item(Main ): Input, data= [ 0x07 ] 7 Constant Variable Relative No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield # usbhid-dump 003:002:001:DESCRIPTOR 1357910009.758544 05 01 09 02 A1 01 05 01 09 02 A1 02 85 01 09 01 A1 00 05 09 19 01 29 05 95 05 75 01 15 00 25 01 81 02 75 03 95 01 81 01 05 01 09 30 09 31 95 02 75 08 15 81 25 7F 81 07 A1 02 85 01 09 38 35 00 45 00 15 81 25 7F 95 01 75 08 81 06 C0 A1 02 85 01 05 0C 15 81 25 7F 95 01 75 08 0A 38 02 81 06 C0 C0 C0 C0 Cc: linux-input@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 03 1月, 2013 1 次提交
-
-
由 Nicholas Santos 提交于
Patch to add the Formosa Industrial Computing, Inc. Infrared Receiver [IR605A/Q] to hid-ids.h and hid-quirks.c. This IR receiver causes about a 10 second timeout when the usbhid driver attempts to initialze the device. Adding this device to the quirks list with HID_QUIRK_NO_INIT_REPORTS removes the delay. Signed-off-by: NNicholas Santos <nicholas.santos@gmail.com> [jkosina@suse.cz: fix ordering] Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 28 12月, 2012 1 次提交
-
-
由 Alexey Klimov 提交于
Don't let Masterkit MA901 USB radio be handled by usb hid drivers. This device will be handled by radio-ma901.c driver. Signed-off-by: NAlexey Klimov <klimov.linux@gmail.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 12 12月, 2012 1 次提交
-
-
由 Alexander Holler 提交于
Those IDs aren't necessary anymore. This reverts commit c8147d9e. Signed-off-by: NAlexander Holler <holler@ahsoftware.de> Acked-by: N"Pandruvada, Srinivas" <srinivas.pandruvada@intel.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 26 11月, 2012 1 次提交
-
-
由 Marek Vasut 提交于
The USB recovery mode present in i.MX23 ROM emulates USB HID. It needs this quirk to behave properly. Even if the official branding of the chip is Freescale i.MX23, I named it Sigmatel STMP3780 since that's what the chip really is and it even reports itself as STMP3780. Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 23 11月, 2012 1 次提交
-
-
由 Marco Biscaro 提交于
This patch adds support to Novatec wireless mouse (device ID 0603:1602). Fixes bug https://bugzilla.kernel.org/show_bug.cgi?id=47031Signed-off-by: NMarco Biscaro <marcobiscaro2112@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 15 11月, 2012 1 次提交
-
-
由 Benjamin Tissoires 提交于
Without this, the device is blocked in dmesg at: hid-multitouch 0003:25AA:8883.000X: usb_submit_urb(ctrl) failed: -1 hid-multitouch 0003:25AA:8883.000X: timeout initializing reports Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 07 11月, 2012 1 次提交
-
-
由 Forest Bond 提交于
Previously, both usbhid and usbtouchscreen would bind to D-WAV devices with class HID and protocol None, so they would be claimed by whichever driver was loaded first. Some of these devices do in fact work with usbhid, but not all of them do. OTOH they all work with usbtouchscreen as of commit 037a833e ("Input: usbtouchscreen - initialize eGalax devices"). So we ignore them in usbhid to prevent getting in the way of usbtouchscreen and claiming an interface that we may not be able to do anything useful with. Signed-off-by: NForest Bond <forest.bond@rapidrollout.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 05 11月, 2012 1 次提交
-
-
由 Stefan Achatz 提交于
KoneXTD is just a Kone[+] with updated sensor, so it's handled by koneplus driver. Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 31 10月, 2012 2 次提交
-
-
由 Bastien Nocera 提交于
Add a driver for the ION iCade mini arcade cabinet [1]. The device generates a key press and release for each joystick movement or button press or release. For example, moving the stick to the left will generate the "A" key being pressed and then released. A list of all the combinations is available in the iCade developer guide [2]. This driver hides all this and makes the device work as a generic joystick. [1]: http://www.ionaudio.com/products/details/icade [2]: http://www.ionaudio.com/downloads/iCade_Dev_Resource_v1.3.pdfSigned-off-by: NBastien Nocera <hadess@hadess.net> Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Dirk Hohndel 提交于
This enables the existing drivers for keyboard and touchpad with the new USB IDs found on the MBP 13" Reasonable Resolution (also known as the Retina Display). Added entries to both keyboard and mouse ignore lists. Signed-off-by: NDirk Hohndel <dirk@hohndel.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 17 10月, 2012 1 次提交
-
-
由 Stefan Achatz 提交于
This patch adds support for Roccat Lua gaming mouse. Userland tools can soon be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 01 10月, 2012 2 次提交
-
-
由 Xianhan Yu 提交于
Fix the touch-up no response problem on GeneralTouch twofingers touchscreen and modify the driver for new GeneralTouch PWT touchscreen. Signed-off-by: NXianhan Yu <aroundight77@gmail.com> Reviewed-by Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 David Dillow 提交于
The Sony PS3 Blue-ray Disc Remote Control used to be supported by the BlueZ project's user space, but the code that handled it was recently removed as its functionality conflicted with a real HSP implementation and the mapping was thought to be better handled in the kernel. This is a port of the mapping logic from the fakehid driver by Marcel Holtmann to the in-kernel HID layer. We also add support for the Logitech Harmony Adapter for PS3, which emulates the BD Remote. Signed-off-by: NDavid Dillow <dave@thedillows.org> Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 20 9月, 2012 1 次提交
-
-
由 Henrik Rydberg 提交于
Add support for the Flatfrog Multitouch 3200 panel. This panel advertises some fields that it does not use, hence the new quirk. Cc: Pablo Cases <pablo.cases@flatfrog.com> Acked-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
- 07 9月, 2012 1 次提交
-
-
由 srinivas pandruvada 提交于
Adding Intel and STM sensor hub in the list of drivers with specialized driver. Signed-off-by: Nsrinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
- 05 9月, 2012 1 次提交
-
-
由 Jiri Kosina 提交于
Paul Walmsley has implemented dynamic quirk handling back in 2007 through commits: 2eb5dc30 ("USB HID: encapsulate quirk handling into hid-quirks.c") 8222fbe6 ("USB HID: clarify static quirk handling as squirks") 8cef9082 ("USB HID: add support for dynamically-created quirks") 876b9276 ("USB HID: add 'quirks' module parameter") and as such, his copyright rightly belongs to drivers/hid/usbhid/hid-quirks.c file. However when generic HID code has been converted to bus and individual quirks separated out to individual drivers on the bus, the copyright has been blindly transfered into all the tiny drivers, which actually don't contain any of Pauls' copyrighted code. Remove the copyright from those sub-drivers. Signed-off-by: NJiri Kosina <jkosina@suse.cz> Acked-by: NPaul Walmsley <paul@pwsan.com>
-
- 27 8月, 2012 2 次提交
-
-
由 Nikolai Kondrashov 提交于
Add support for UC-Logic Tablet TWHA60. It is known to be sold as Genius EasyPen M610 and Monoprice MP1060-HA60. As this tablet has several variations with different number and different assignments of frame buttons, they are simply mapped to F1-F24 range and are left for users to remap in userspace. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Simon Farnsworth 提交于
For some reason, we had two IDs for the QUANTA 3001 touchscreen controller, one USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001 and one USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN. As this has caused confusion, remove USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN completely, and fix places where it was used to refer to USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001. Signed-off-by: NSimon Farnsworth <simon.farnsworth@onelan.co.uk> Acked-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 15 8月, 2012 3 次提交
-
-
由 Thierry Reding 提交于
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Marek Vasut 提交于
The USB recovery mode present in i.MX28 ROM emulates USB HID. It needs this quirk to behave properly. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chen Peter <B29397@freescale.com> Cc: Greg KH <greg@kroah.com> Cc: Jiri Kosina <jkosina@suse.cz> [jkosina@suse.cz: fix alphabetical ordering] Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Reported-by: NTom Mealey <thecompwiz@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 31 7月, 2012 1 次提交
-
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 23 7月, 2012 1 次提交
-
-
由 Cyrus Lien 提交于
Add Asus All-In-One PC keyboard model AK1D. BugLink: https://bugs.launchpad.net/bugs/1027789Signed-off-by: NCyrus Lien <cyrus.lien@canonical.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 22 7月, 2012 1 次提交
-
-
由 Lionel Vaux 提交于
Add yet another device to the list of Cypress barcode scanners needing the CP_RDESC_SWAPPED_MIN_MAX quirk. Signed-off-by: NLionel Vaux (iouri) <lionel.vaux@free.fr> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-