- 22 6月, 2006 40 次提交
-
-
由 Matt Reimer 提交于
Acked-by: NDavid Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Bock 提交于
This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information. Signed-off-by: NOliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Fix up the documentation. Apparently, I left unedited copy-paste results in examples. Also, Alan helped me to improve the most confusing parts. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Implement the "error" event in usbmon. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
This update contains one bug fix: some lines can come out truncated, because of the safety cutoff. This happened because I forgot to update the size when status packets began to be printed. The rest is: - Comments updates - Allow snooping with pkmap on x86_64, which is cache-coherent - Enlarge event buffers (certainly we can have a couple of pages) - Add event counter First touch upon usbmon for 2.6.18. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Al Borchers suggested to do this in his review of my previous patch. I guess that I skipped this initially because of my visceral dislike of sizeof(data). But in this case it seems well localized. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Timothy Sipples 提交于
Adds vendor & product IDs to drivers/usb/serial/airprime.c for Kyocera Wireless KPC650/Passport EV-DO/1xRTT PC Cards. Signed-off-by: NTimothy Sipples <Timothy.Sipples@us.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as707) improves the FSBR operation in uhci-hcd by turning it off more quickly when it isn't needed. FSBR puts a noticeable load on a computer's PCI bus, so it should be disabled as soon as possible when it isn't in use. The patch leaves it running for only 10 ms after the last URB stops using it, on the theory that this should be long enough for a driver to submit another URB if it wants keep FSBR going. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as706) removes the private hc_inaccessible flag from uhci-hcd. It's not needed because it conveys exactly the same information as the generic HCD_FLAG_HW_ACCESSIBLE bit. In its place goes a new flag recording whether the controller is dead. The new code allows a complete device reset to resurrect a dead controller (although usbcore doesn't yet implement such a facility). Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This patch (as705) contains a small set of updates for uhci-hcd written mostly by Dave Brownell: * Root hub suspend messages come out labeled as root hub messages; PCI messages should only come out when the pci device suspends. * Rename the reset() method to better match its init() role * Behave more like the other HCDs by returning -ESHUTDOWN for root-hub suspend/resume errors. * When an URB fails, associate the message with the usb device not the host controller (it still hides endpoint and direction) From: David Brownell <david-b@pacbell.net> Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as704) adds an unusual_devs entry for the Nikon DSC D70s, which uses a different Product ID from the D70. It also moves the entry for the DSC E2000 up in the list, to preserve the numerical ordering. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rene Rebe 提交于
This adds the Apple MacBook product IDs for the Fn translation to the usbhid. Signed-off-by: NRene Rebe <rene@exactcode.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ralf Baechle 提交于
Including ehci-au1xxx.c on a non-Au1200 Alchemy only to have it throw an error is stupid. From: Ralf Baechle <ralf@linux-mips.org> Acked-by: NDavid Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Chris Lund 提交于
While an Edgeport is allocating individual port structures, if kmalloc returns NULL, the serial structure is freed and -ENOMEM, but the ports allocated before the failure are not freed. This patch addresses that condition. Signed-off-by: NChristopher Lund <docmax@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthias Urlichs 提交于
This patch extends the "option" driver with a few more devices, some of which are actually connected to USB the "right" way -- as opposed to doing it via PCMCIA and OHCI. Signed-Off-By: NMatthias Urlichs <smurf@debian.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Philippe Retornaz 提交于
See http://bugzilla.kernel.org/show_bug.cgi?id=6617. This function dereference a __user pointer. Signed-off-by: NPhilippe Retornaz <couriousous@mandriva.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as703) improves the error handling when a Set-Configuration request fails. The old interfaces are all unregistered before the request is sent, and if the request fails then we don't know what config the device is using. So it makes no sense to leave actconfig pointing to the old configuration with its invalid interfaces. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as702) makes usbhid use the new usb_reset_composite_device API. Now HID interfaces can coexist with other interfaces on the same device, and a reset can safely be requested by any of the drivers. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as701) modifies usb-storage to take advantage of the new usb_reset_composite_device() API. Now we will be able to safely request port resets even if other drivers are bound to a mass-storage device. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as700) modifies the hub driver to take advantage of the new usb_reset_composite_device API. The existing code had special-case calls stuck into usb_reset_device, just before and after the reset. With the new version there's no need for special-case stuff; it all happens naturally in the form of pre_reset and post_reset notifications. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as699) adds usb_reset_composite_device(), a routine for sending a USB port reset to a device with multiple interfaces owned by different drivers. Drivers are notified about impending and completed resets through two new methods in the usb_driver structure. The patch modifieds the usbfs ioctl code to make it use the new routine instead of usb_reset_device(). Follow-up patches will modify the hub, usb-storage, and usbhid drivers so they can utilize this new API. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Earlier work splitting the "usbnet" driver out into a core plus driver modules was missing a blacklist entry for the Olympus R-1000; it must not use the CDC Ethernet driver, only the "zaurus" support works with it. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Eric Sesterhenn 提交于
From: Eric Sesterhenn <snakebyte@gmx.de> This fixes coverity Bug #390. With the following code ret = ep->branch = balance(isp116x, ep->period, ep->load); if (ret < 0) goto fail; the problem is that ret and balance are of the type int, and ep->branch is u16. so the int balance() returns gets reduced to u16 and then converted to an int again, which removes the sign. Maybe the following little c program can explain it better:
-
由 Jeremy Fitzhardinge 提交于
Recognize the Sierra Wireless MC5720. Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stuart MacDonald 提交于
Attached patch fixes spurious errors during firmware load. Signed-off-by: NStuart MacDonald <stuartm@connecttech.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 akpm@osdl.org 提交于
This is a driver to control the brightness of an Apple Cinema Display over USB. It updates the local brightness value if the user presses a button on the display. Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch> Cc: Oliver Neukum <oliver@neukum.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
This patch adds support for Yost Engineering Inc's ServoCenter 3.1 USB product to the ftdi_sio driver's device ID table. The PID was supplied by Aaron Prose of Yost Engineering on the ftdi-usb-sio-devel list. The PID 0xE050 matches the Windows INF files for this device. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
Now that usbhid automatically applies HID_QUIRK_NOGET to keyboards and mice, we no longer need the blacklist entries that were present for no other purpose. This patch (as698) removes them. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Acked-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Giridhar Pemmasani 提交于
RNDIS devices don't get configured owing to a typo in choose_configuration(). This patch from Giridhar Pemmasani fixes the typo. From: Giridhar Pemmasani <giri@lmc.cs.sunysb.edu> Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Daniel Drake 提交于
2.6.16 introduces USB power budgeting in the Linux kernel, and since then, a fair number of users have observed that some of their devices no longer work in unpowered hubs (this is not a bug, the devices claim that they need more than 100mA). The very least we can do is print an informational message to the kernel log when this happens, otherwise it is not at all clear why the device was not accepted. Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Remove more log spamming from pegasus: stop talking to the device once we see ENODEV reported. It may take a while before khubd notifies us. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Remove some silly messages and cast in stone "temporary" messages which we keep around. Also, I am hesitant to remove the initialization retries without having the hardware to test (anyone who was at KS04 has a spare?) Signed-off-by: NPete Zaitcev <zaitcev@yahoo.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
<zaitcev> I am taling about this: "if (disk->flags & GENHD_FL_UP) del_gendisk(disk);" <zaitcev> If del_gendisk() undoes add_disk() like viro just said, why is it conditional? <viro> huh? <viro> add_disk() sets the damn flag <zaitcev> So, I should not need to check ever <viro> so the above is "if I've called add_disk(), call gendisk()" <viro> which might be what you want, of course <viro> but usually you know if you'd done add_disk() on that puppy anyway In ub, nobody upstream should ever see half-constructed disks before they were passed to add_disk. To that end, only add the struct lun to the list on the path of no return. With that fix in place, we do not need to test GENHD_FL_UP. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Wait for the scheduled work to finish before freeing memory, prevent oops. http://bugzilla.kernel.org/show_bug.cgi?id=6596Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Streetman 提交于
This updates the EHCI driver by adding an improved scheduler for the transaction translators, found in USB 2.0 hubs and used for low and full speed devices. - adds periodic_tt_usecs() and some helper functions, which does the same thing that "periodic_usecs" does, except on the other side of the TT, i.e. it calculates the low/fullspeed bandwidth usage instead of highspeed. - adds a tt_available() function which is the new implementation of what tt_no_collision() does ... while tt_no_collision() ensures that each TT handles only 1 periodic transfer at a time (a very pessimistic approach) this version instead tracks bandwidth and allows each TT to handle as many transfers as will fit on each TT's downstream bus (closer to best-case). The new scheduler is selected by a config option, marked as EXPERIMENTAL so it can be tested (and more broadly reviewed) for a while until it seems safe to remove the original scheduler. Signed-off-by: NDan Streetman <ddstreet@ieee.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Franck Bui-Huu 提交于
This patch uses completion timeout instead of a timer to implement a timeout when submitting an URB. It also put the task in interruptible state instead of an uninterruptible one while waiting for the completion. Signed-off-by: NFranck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Remove the silly trailing backslash. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Add a couple of supported devices into the help message. It's a long story... I promised this comment changed to a user long ago, so I'd like to have that promise kept. In reality though, nobody is likely to read this anyway. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
I'm going to throw schedule_work away, it's retarded. But for starters, let's have it encapsulated. Also, generic and whiteheat were both calling usb_serial_port_softint and scheduled work. Only one was necessary. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Clean up the unicode handling in io_edgeport. Make get_string size-limited. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-