Napi is checking Tx queue status and waking the Tx queue if required.
Same operation is being done while freeing every Tx buffer.
So removed the duplicate operation of checking Tx queue status from the Tx
buffer free functions.
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove local ADBG macro and use netdev_dbg/pr_debug

Miscellanea:

o Remove unnecessary debug message after allocation failure as there
  already is a dump_stack() on the failure paths
o Leave the allocation failure message on snmp6_alloc_dev as there
  is one code path that does not do a dump_stack()
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If tdc is executing test cases inside a namespace, only the
first command in a compound statement will be executed inside
the namespace by tdc. As a result, the subsequent commands
are not executed inside the namespace and the test will fail.

Example:

for i in {x..y}; do args="foo"; done && tc actions add $args

The namespace execution feature will prepend 'ip netns exec'
to the command:

ip netns exec tcut for i in {x..y}; do args="foo"; done && \
  tc actions add $args

So the actual tc command is not parsed by the shell as being
part of the namespace execution.

Enclosing these compound statements inside a bash invocation
with proper escape characters resolves the problem by creating
a subshell inside the namespace.
Signed-off-by: NLucas Bates <lucasb@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes the following sparse warning:

net/tipc/node.c:336:18: warning:
 symbol 'tipc_node_create' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Release alloced resource before return from the error handling
case in tipc_udp_enable(), otherwise will cause memory leak.

Fixes: 52dfae5c ("tipc: obtain node identity from interface by default")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes the following sparse warning:

drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:508:5: warning:
 symbol 'hw_atl_utils_mpi_set_speed' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Maxime Chevallier says:

====================
net: mvpp2: Remove unnecessary dynamic allocs

Some utility functions in mvpp2 make use of dynamic alloc to exchange temporary
objects representing Parser Entries (which are generic filtering entries in the
PPv2 controller).

These objects are small (44 bytes each), we can use the stack to exchange them.

Some previous discussion on this topic showed that the mvpp2_prs_hw_read, which
initializes a struct mvpp2_prs_entry based on one of its fields, can easily lead
to erroneous code if we don't zero-out the struct beforehand :

https://lkml.org/lkml/2018/3/21/739

To fix this, I propose to rename mvpp2_prs_hw_read into mvpp2_prs_init_from_hw,
make it zero-out the struct and take the index as a parameter. That's what's
done in the first patch of the series.

The second patch is the V3 of
("net: mvpp2: Don't use dynamic allocs for local variables"), making use of
mvpp2_prs_init_from_hw and taking previous comments into account.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some helper functions that search for given entries in the TCAM filter
on PPv2 controller make use of dynamically alloced temporary variables,
allocated with GFP_KERNEL. These functions can be called in atomic
context, and dynamic alloc is not really needed in these cases anyways.

This commit gets rid of dynamic allocs and use stack allocation in the
following functions, and where they're used :
 - mvpp2_prs_flow_find
 - mvpp2_prs_vlan_find
 - mvpp2_prs_double_vlan_find
 - mvpp2_prs_mac_da_range_find

For all these functions, instead of returning an temporary object
representing the TCAM entry, we simply return the TCAM id that matches
the requested entry.
Signed-off-by: NMaxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mvpp2_prs_hw_read function uses the 'index' field of the struct
mvpp2_prs_entry to initialize the rest of the fields. This makes it
unclear from a caller's perspective, who needs to manipulate a struct
that is not entirely initialized.

This commit makes it an init function for prs_entry, by passing it the
index as a parameter. The function now zeroes the entry, and sets the
index field before doing all other init from HW.

The function is renamed 'mvpp2_prs_init_from_hw' to make that clear.
Signed-off-by: NMaxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The call to nla_nest_start calls nla_put which can lead to a NULL
return so it's possible for attr to become NULL and we can potentially
get a NULL pointer dereference on attr.  Fix this by checking for
a NULL return.

Detected by CoverityScan, CID#1466125 ("Dereference null return")

Fixes: 955dc68c ("net/ncsi: Add generic netlink family")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After Commit dae399d7 ("sctp: hold transport instead of assoc
when lookup assoc in rx path"), it put transport instead of asoc
in sctp_has_association. Variable 'asoc' is not used any more.

So this patch is to remove it, while at it,  it also changes the
return type of sctp_has_association to bool, and does the same
for it's caller sctp_endpoint_is_peeled_off.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2018-03-26

This series contains updates to i40e only.

Jake provides several patches which remove the need for cmpxchg64(),
starting with moving I40E_FLAG_[UDP]_FILTER_SYNC from pf->flags to pf->state
since they are modified during run time possibly when the RTNL lock is not
held so they should be a state bits and not flags.  Moved additional
"flags" which should be state fields, into pf->state.  Ensure we hold
the RTNL lock for the entire sequence of preparing for reset and when
resuming, which will protect the flags related to interrupt scheme under
RTNL lock so that their modification is properly threaded.  Finally,
cleanup the use of cmpxchg64() since it is no longer needed.  Cleaned up
the holes in the feature flags created my moving some flags to the state
field.

Björn Töpel adds XDP_REDIRECT support as well as tweaking the page
counting for XDP_REDIRECT so that it will function properly.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2018-03-26

This patch series adds the ice driver, which will support the Intel(R)
E800 Series of network devices.

This is the first phase in the release of this driver where we implement
basic transmit and receive. The idea behind the multi-phase release is to
aid in code review as well as testing. Subsequent phases will implement
advanced features (like SR-IOV, tunnelling, flow director, QoS, etc.) that
build upon the previous phase(s). Each phase will be submitted as a patch
series.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver now acts upon the XDP_REDIRECT return action. Two new ndos
are implemented, ndo_xdp_xmit and ndo_xdp_flush.

XDP_REDIRECT action enables XDP program to redirect frames to other
netdevs.
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This commit tweaks the page counting for XDP_REDIRECT to function
properly. XDP_REDIRECT support will be added in a future commit.

The current page counting scheme assumes that the reference count
cannot decrease until the received frame is sent to the upper layers
of the networking stack. This assumption does not hold for the
XDP_REDIRECT action, since a page (pointed out by xdp_buff) can have
its reference count decreased via the xdp_do_redirect call.

To work around that, we now start off by a large page count and then
don't allow a refcount less than two.
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Remove the gaps created by the recent refactor of various feature flags
that have moved to the state field. Use only a u32 now that we have
fewer than 32 flags in the field.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Now that the only places which modify flags are either (a) during
initialization prior to creating a netdevice, or (b) while holding the
rtnl lock, we no longer need the cmpxchg64 call in i40e_set_priv_flags.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When we suspend and resume, we need to clear and re-enable the interrupt
scheme. This was previously not done while holding the RTNL lock, which
could be problematic, because we are actually destroying and re-creating
queues.

Hold the RTNL lock for the entire sequence of preparing for reset, and
when resuming. This additionally protects the flags related to interrupt
scheme under RTNL lock so that their modification is properly threaded.

This is part of a larger effort to remove the need for cmpxchg64 in
i40e_set_priv_flags().
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The iWarp client flags are all potentially changed when the RTNL lock is
not held, so they should not be part of the pf->flags variable. Instead,
move them into the state field so that we can use atomic bit operations.

This is part of a larger effort to remove cmpxchg64 in
i40e_set_priv_flags()
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This flag is modified outside of the RTNL lock and thus should not be
part of the pf->flags variable.

Use a state bit instead, so that we can use atomic bit operations.

This is part of a larger effort to remove cmpxchg64 in
i40e_set_priv_flags()
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The two Flow Directory auto disable flags are used at run time to mark
when the flow director features needed to be disabled. Thus the flags
could change even when the RTNL lock is not held.

They also have some code constructions which really should be
test_and_set or test_and_clear using atomic bit operations.

Create new state fields to mark this, and stop including them in
pf->flags.

This is part of a larger effort to remove the need for cmpxchg64 in
i40e_set_priv_flags().
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This flag is modified during run time, possibly even when the RTNL lock
is not held. Additionally it has a few places which should be using
test_and_set or test_and_clear atomic bit operations.

Create a new state bit __I40E_UDP_SYNC_PENDING and use it instead of the
ole I40E_FLAG_UDP_FILTER_SYNC flag.

This is part of a larger effort to remove the need for using cmpxchg64
in i40e_set_priv_flags.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The I40E_FLAG_FILTER_SYNC flag is modified during run time possibly when
the RTNL lock is not held. Thus, it should not be part of pf->flags, and
instead should be using atomic bit operations in the pf->state field.

Create a __I40E_MACVLAN_SYNC_PENDING state bit, and use it instead of
the old I40E_FLAG_FILTER_SYNC flag.

This is part of a larger effort to remove the need for cmpxchg64 in
i40e_set_priv_flags().
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch implements multiple pieces of functionality:

1. Added ice_vsi_sync_filters, which is called through the service task
   to push filter updates to the hardware.

2. Add support to enable/disable promiscuous mode on an interface.
   Enabling/disabling promiscuous mode on an interface results in
   addition/removal of a promisc filter rule through ice_vsi_sync_filters.

3. Implement handlers for ndo_set_mac_address, ndo_change_mtu,
   ndo_poll_controller and ndo_set_rx_mode.

This patch also marks the end of the driver addition by bumping up the
driver version.
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Link events are posted to a PF's admin receive queue (ARQ). This patch
adds the ability to detect and process link events.

This patch also adds the ability to process resets.

The driver can process the following resets:
    1) EMP Reset (EMPR)
    2) Global Reset (GLOBR)
    3) Core Reset (CORER)
    4) Physical Function Reset (PFR)

EMPR is the largest level of reset that the driver can handle. An EMPR
resets the manageability block and also the data path, including PHY and
link for all the PFs. The affected PFs are notified of this event through
a miscellaneous interrupt.

GLOBR is a subset of EMPR. It does everything EMPR does except that it
doesn't reset the manageability block.

CORER is a subset of GLOBR. It does everything GLOBR does but doesn't
reset PHY and link.

PFR is a subset of CORER and affects only the given physical function.
In other words, PFR can be thought of as a CORER for a single PF. Since
only the issuing PF is affected, a PFR doesn't result in the miscellaneous
interrupt being triggered.

All the resets have the following in common:
1) Tx/Rx is halted and all queues are stopped.
2) All the VSIs and filters programmed for the PF are lost and have to be
   reprogrammed.
3) Control queue interfaces are reset and have to be reprogrammed.

In the rebuild flow, control queues are reinitialized, VSIs are reallocated
and filters are restored.
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds the ability for a VSI to use multiple Tx queues. More
specifically, the patch
    1) Provides the ability to update the Tx scheduler tree in the
       firmware. The driver can configure the Tx scheduler tree by
       adding/removing multiple Tx queues per TC per VSI.

    2) Allows a VSI to reconfigure its Tx queues during runtime.

    3) Synchronizes the Tx scheduler update operations using locks.
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch implements a watchdog task to get packet statistics from
the device.

This patch also adds support for the following ethtool operations:

ethtool devname
ethtool -s devname [msglvl N] [msglevel type on|off]
ethtool -g|--show-ring devname
ethtool -G|--set-ring devname [rx N] [tx N]
ethtool -i|--driver devname
ethtool -d|--register-dump devname [raw on|off] [hex on|off] [file name]
ethtool -k|--show-features|--show-offload devname
ethtool -K|--features|--offload devname feature on|off
ethtool -P|--show-permaddr devname
ethtool -S|--statistics devname
ethtool -a|--show-pause devname
ethtool -A|--pause devname [autoneg on|off] [rx on|off] [tx on|off]
ethtool -r|--negotiate devname

CC: Andrew Lunn <andrew@lunn.ch>
CC: Jakub Kicinski <kubakici@wp.pl>
CC: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Acked-by: NStephen Hemminger <stephen@networkplumber.org>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds support for VLANs. When a VLAN is created a switch filter
is added to direct the VLAN traffic to the corresponding VSI. When a VLAN
is deleted, the filter is deleted as well.

This patch also adds support for the following hardware offloads.
    1) VLAN tag insertion/stripping
    2) Receive Side Scaling (RSS)
    3) Tx checksum and TCP segmentation
    4) Rx checksum
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch implements ice_start_xmit (the handler for ndo_start_xmit) and
related functions. ice_start_xmit ultimately calls ice_tx_map, where the
Tx descriptor is built and posted to the hardware by bumping the ring tail.

This patch also implements ice_napi_poll, which is invoked when there's an
interrupt on the VSI's queues. The interrupt can be due to either a
completed Tx or an Rx event. In case of a completed Tx/Rx event, resources
are reclaimed. Additionally, in case of an Rx event, the skb is fetched
and passed up to the network stack.
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch configures the VSIs to be able to send and receive
packets by doing the following:

1) Initialize flexible parser to extract and include certain
   fields in the Rx descriptor.

2) Add Tx queues by programming the Tx queue context (implemented in
   ice_vsi_cfg_txqs). Note that adding the queues also enables (starts)
   the queues.

3) Add Rx queues by programming Rx queue context (implemented in
   ice_vsi_cfg_rxqs). Note that this only adds queues but doesn't start
   them. The rings will be started by calling ice_vsi_start_rx_rings on
   interface up.

4) Configure interrupts for VSI queues.

5) Implement ice_open and ice_stop.
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

A VSI needs traffic directed towards it. This is done by programming
filter rules on the switch (embedded vSwitch) element in the hardware,
which connects the VSI to the ingress/egress port.

This patch introduces data structures and functions necessary to add
remove or update switch rules on the switch element. This is a pretty low
level function that is generic enough to add a whole range of filters.

This patch also introduces two top level functions ice_add_mac and
ice_remove mac which through a series of intermediate helper functions
eventually call ice_aq_sw_rules to add/delete simple MAC based filters.
It's worth noting that one invocation of ice_add_mac/ice_remove_mac
is capable of adding/deleting multiple MAC filters.

Also worth noting is the fact that the driver maintains a list of currently
active filters, so every filter addition/removal causes an update to this
list. This is done for a couple of reasons:

1) If two VSIs try to add the same filters, we need to detect it and do
   things a little differently (i.e. use VSI lists, described below) as
   the same filter can't be added more than once.

2) In the event of a hardware reset we can simply walk through this list
   and restore the filters.

VSI Lists:
In a multi-VSI situation, it's possible that multiple VSIs want to add the
same filter rule. For example, two VSIs that want to receive broadcast
traffic would both add a filter for destination MAC ff:ff:ff:ff:ff:ff.
This can become cumbersome to maintain and so this is handled using a
VSI list.

A VSI list is resource that can be allocated in the hardware using the
ice_aq_alloc_free_res admin queue command. Simply put, a VSI list can
be thought of as a subscription list containing a set of VSIs to which
the packet should be forwarded, should the filter match.

For example, if VSI-0 has already added a broadcast filter, and VSI-1
wants to do the same thing, the filter creation flow will detect this,
allocate a VSI list and update the switch rule so that broadcast traffic
will now be forwarded to the VSI list which contains VSI-0 and VSI-1.
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch introduces data structures and functions to alloc/free
VSIs. The driver represents a VSI using the ice_vsi structure.

Some noteworthy points about VSI allocation:

1) A VSI is allocated in the firmware using the "add VSI" admin queue
   command (implemented as ice_aq_add_vsi). The firmware returns an
   identifier for the allocated VSI. The VSI context is used to program
   certain aspects (loopback, queue map, etc.) of the VSI's configuration.

2) A VSI is deleted using the "free VSI" admin queue command (implemented
   as ice_aq_free_vsi).

3) The driver represents a VSI using struct ice_vsi. This is allocated
   and initialized as part of the ice_vsi_alloc flow, and deallocated
   as part of the ice_vsi_delete flow.

4) Once the VSI is created, a netdev is allocated and associated with it.
   The VSI's ring and vector related data structures are also allocated
   and initialized.

5) A VSI's queues can either be contiguous or scattered. To do this, the
   driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with
   the firmware's VSI queue allocation imap. If the VSI can't get a
   contiguous queue allocation, it will fallback to scatter. This is
   implemented in ice_vsi_get_qs which is called as part of the VSI setup
   flow. In the release flow, the VSI's queues are released and the bitmap
   is updated to reflect this by ice_vsi_put_qs.

CC: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Acked-by: NShannon Nelson <shannon.nelson@oracle.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch continues the initialization flow as follows:

1) Allocate and initialize necessary fields (like vsi, num_alloc_vsi,
   irq_tracker, etc) in the ice_pf instance.

2) Setup the miscellaneous interrupt handler. This also known as the
   "other interrupt causes" (OIC) handler and is used to handle non
   hotpath interrupts (like control queue events, link events,
   exceptions, etc.

3) Implement a background task to process admin queue receive (ARQ)
   events received by the driver.

CC: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Acked-by: NShannon Nelson <shannon.nelson@oracle.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds code to continue the initialization flow as follows:

1) Get PHY/link information and store it
2) Get default scheduler tree topology and store it
3) Get the MAC address associated with the port and store it
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds to the initialization flow by getting switch
configuration, scheduler configuration and device capabilities.

Switch configuration:
On boot, an L2 switch element is created in the firmware per physical
function. Each physical function is also mapped to a port, to which its
switch element is connected. In other words, this switch can be visualized
as an embedded vSwitch that can connect a physical function's virtual
station interfaces (VSIs) to the egress/ingress port. Egress/ingress
filters will be eventually created and applied on this switch element.
As part of the initialization flow, the driver gets configuration data
from this switch element and stores it.

Scheduler configuration:
The Tx scheduler is a subsystem responsible for setting and enforcing QoS.
As part of the initialization flow, the driver queries and stores the
default scheduler configuration for the given physical function.

Device capabilities:
As part of initialization, the driver has to determine what the device is
capable of (ex. max queues, VSIs, etc). This information is obtained from
the firmware and stored by the driver.

CC: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Acked-by: NShannon Nelson <shannon.nelson@oracle.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Ido Schimmel says:

====================
mlxsw: Offload IPv6 multicast routes

Yuval says:

The series is intended to allow offloading IPv6 multicast routes
and is split into two parts:

  - First half of the patches continue extending ip6mr [& refactor ipmr]
    with missing bits necessary for the offloading - fib-notifications,
    mfc refcounting and default rule identification.

  - Second half of the patches extend functionality inside mlxsw,
    beginning with extending lower-parts to support IPv6 mroutes
    to host and later extending the router/mr internal APIs within
    the driver to accommodate support in ipv6 configurations.
    Lastly it adds support in the RTNL_FAMILY_IP6MR notifications,
    allowing driver to react and offload related routes.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a new trap for PIMv6 packets. As PIM already has a designated trap
group [ & rate limiter], simply use the same for PIMv6 as well.
Signed-off-by: NYuval Mintz <yuvalm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Following previous patches driver is ready to handle notifications
arriving from ip6mr - start processing those when they arrive following
the same manner ipmr currently goes through.

This should enable driver to start offloading ipv6 multicast routes.
Signed-off-by: NYuval Mintz <yuvalm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Populate the various operation structures meant for IPv6 with logic
unique to that protocol suite.
Signed-off-by: NYuval Mintz <yuvalm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

spectrum_router and spectrum_mr have several APIs that are used to
manipulate configurations originating from ipmr fib notifications.
Following previous patches all the protocol-specifics that are necessary
for the configuration are hidden within spectrum_mr. This allows us to
clean the API and make sure that other than choosing the mr_table based
on the fib notification family, spectrum_router wouldn't care about the
source of the notification when passing it onward to spectrum_mr.

This would later allow us to leverage the same code for fib
notifications originating from ip6mr.
Signed-off-by: NYuval Mintz <yuvalm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>