- 15 1月, 2011 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Move the evaluation of acpi_pci_osc_control_set() (to request control of PCI Express native features) into acpi_pci_root_add() to avoid calling it many times for the same root complex with the same arguments. Additionally, check if all of the requisite _OSC support bits are set before calling acpi_pci_osc_control_set() for a given root complex. References: https://bugzilla.kernel.org/show_bug.cgi?id=20232Reported-by: NOzan Caglayan <ozan@pardus.org.tr> Tested-by: NOzan Caglayan <ozan@pardus.org.tr> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 16 10月, 2010 1 次提交
-
-
由 Zhang Rui 提交于
Remove unused declaration of proc_fs.h. Signed-off-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 25 8月, 2010 5 次提交
-
-
由 Rafael J. Wysocki 提交于
After commit 852972ac (ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe) control of the PCIe Capability Structure is unconditionally requested by acpi_pci_root_add(), which in principle may cause problems to happen in two ways. First, the BIOS may refuse to give control of the PCIe Capability Structure if it is not asked for any of the _OSC features depending on it at the same time. Second, the BIOS may assume that control of the _OSC features depending on the PCIe Capability Structure will be requested in the future and may behave incorrectly if that doesn't happen. For this reason, control of the PCIe Capability Structure should always be requested along with control of any other _OSC features that may depend on it (ie. PCIe native PME, PCIe native hot-plug, PCIe AER). Rework the PCIe port driver so that (1) it checks which native PCIe port services can be enabled, according to the BIOS, and (2) it requests control of all these services simultaneously. In particular, this causes pcie_portdrv_probe() to fail if the BIOS refuses to grant control of the PCIe Capability Structure, which means that no native PCIe port services can be enabled for the PCIe Root Complex the given port belongs to. If that happens, ASPM is disabled to avoid problems with mishandling it by the part of the PCIe hierarchy for which control of the PCIe Capability Structure has not been received. Make it possible to override this behavior using 'pcie_ports=native' (use the PCIe native services regardless of the BIOS response to the control request), or 'pcie_ports=compat' (do not use the PCIe native services at all). Accordingly, rework the existing PCIe port service drivers so that they don't request control of the services directly. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Rafael J. Wysocki 提交于
It is possible that the BIOS will not grant control of all _OSC features requested via acpi_pci_osc_control_set(), so it is recommended to negotiate the final set of _OSC features with the query flag set before calling _OSC to request control of these features. To implement it, rework acpi_pci_osc_control_set() so that the caller can specify the mask of _OSC control bits to negotiate and the mask of _OSC control bits that are absolutely necessary to it. Then, acpi_pci_osc_control_set() will run _OSC queries in a loop until the mask of _OSC control bits returned by the BIOS is equal to the mask passed to it. Also, before running the _OSC request acpi_pci_osc_control_set() will check if the caller's required control bits are present in the final mask. Using this mechanism we will be able to avoid situations in which the BIOS doesn't grant control of certain _OSC features, because they depend on some other _OSC features that have not been requested. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Rafael J. Wysocki 提交于
There is the assumption in acpi_pci_osc_control_set() that it is always sufficient to compare the mask of _OSC control bits to be requested with the result of an _OSC query where all of the known control bits have been checked. However, in general, that need not be the case. For example, if an _OSC feature A depends on an _OSC feature B and control of A, B plus another _OSC feature C is requested simultaneously, the BIOS may return A, B, C, while it would only return C if A and C were requested without B. That may result in passing a wrong mask of _OSC control bits to an _OSC control request, in which case the BIOS may only grant control of a subset of the requested features. Moreover, acpi_pci_run_osc() will return error code if that happens and the caller of acpi_pci_osc_control_set() will not know that it's been granted control of some _OSC features. Consequently, the system will generally not work as expected. Apart from this acpi_pci_osc_control_set() always uses the mask of _OSC control bits returned by the very first invocation of acpi_pci_query_osc(), but that is done with the second argument equal to OSC_PCI_SEGMENT_GROUPS_SUPPORT which generally happens to affect the returned _OSC control bits. For these reasons, make acpi_pci_osc_control_set() always check if control of the requested _OSC features will be granted before making the final control request. As a result, the osc_control_qry and osc_queried members of struct acpi_pci_root are not necessary any more, so drop them and remove the remaining code referring to them. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Rafael J. Wysocki 提交于
Make acpi_pci_query_osc() use an additional pointer argument to return the mask of control bits obtained from the BIOS to the caller. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Rafael J. Wysocki 提交于
Make acpi_pci_osc_control_set() attempt to find the handle of the _OSC object under the given PCI root bridge object after verifying that its second argument is correct and that there is a struct acpi_pci_root object for the given root bridge handle, which is more logical than the old code. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Reviewed-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 31 7月, 2010 1 次提交
-
-
由 Matthew Garrett 提交于
The PCI SIG documentation for the _OSC OS/firmware handshaking interface states: "If the _OSC control method is absent from the scope of a host bridge device, then the operating system must not enable or attempt to use any features defined in this section for the hierarchy originated by the host bridge." The obvious interpretation of this is that the OS should not attempt to use PCIe hotplug, PME or AER - however, the specification also notes that an _OSC method is *required* for PCIe hierarchies, and experimental validation with An Alternative OS indicates that it doesn't use any PCIe functionality if the _OSC method is missing. That arguably means we shouldn't be using MSI or extended config space, but right now our problems seem to be limited to vendors being surprised when ASPM gets enabled on machines when other OSs refuse to do so. So, for now, let's just disable ASPM if the _OSC method doesn't exist or refuses to hand over PCIe capability control. Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 04 4月, 2010 2 次提交
-
-
由 Bjorn Helgaas 提交于
The acpi_pci_root structure contains all the individual items (acpi_device, domain, bus number) we pass to pci_acpi_scan_root(), so just pass the single acpi_pci_root pointer directly. This will make it easier to add _CBA support later. For _CBA, we need the entire downstream bus range, not just the base bus number. We have that in the acpi_pci_root structure, so passing the pointer makes it available to the arch-specific code. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
Previously, we only saved the root bus number, i.e., the beginning of the downstream bus range. We now support IORESOURCE_BUS resources, so this patch uses that to keep track of both the beginning and the end of the downstream bus range. It's important to know both the beginning and the end for supporting _CBA (see PCI Firmware spec, rev 3.0, sec 4.1.3) and so we know the limits for any possible PCI bus renumbering (we can't renumber downstream buses to be outside the bus number range claimed by the host bridge). It's clear from the spec that the bus range is supposed to be in _CRS, but if we don't find it there, we'll assume [_BBN - 0xFF] or [0 - 0xFF]. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 24 2月, 2010 1 次提交
-
-
由 Bjorn Helgaas 提交于
The main benefit of using ACPI host bridge window information is that we can do better resource allocation in systems with multiple host bridges, e.g., http://bugzilla.kernel.org/show_bug.cgi?id=14183 Sometimes we need _CRS information even if we only have one host bridge, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/341681 Most of these systems are relatively new, so this patch turns on "pci=use_crs" only on machines with a BIOS date of 2008 or newer. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 23 2月, 2010 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Although the majority of PCI devices can generate PMEs that in principle may be used to wake up devices suspended at run time, platform support is generally necessary to convert PMEs into wake-up events that can be delivered to the kernel. If ACPI is used for this purpose, PME signals generated by a PCI device will trigger the ACPI GPE associated with the device to generate an ACPI wake-up event that we can set up a handler for, provided that everything is configured correctly. Unfortunately, the subset of PCI devices that have GPEs associated with them is quite limited. The devices without dedicated GPEs have to rely on the GPEs associated with other devices (in the majority of cases their upstream bridges and, possibly, the root bridge) to generate ACPI wake-up events in response to PME signals from them. Add ACPI platform support for PCI PME wake-up: o Add a framework making is possible to use ACPI system notify handlers for run-time PM. o Add new PCI platform callback ->run_wake() to struct pci_platform_pm_ops allowing us to enable/disable the platform to generate wake-up events for given device. Implemet this callback for the ACPI platform. o Define ACPI wake-up handlers for PCI devices and PCI root buses and make the PCI-ACPI binding code register wake-up notifiers for all PCI devices present in the ACPI tables. o Add function pci_dev_run_wake() which can be used by PCI drivers to check if given device is capable of generating wake-up events at run time. Developed in cooperation with Matthew Garrett <mjg@redhat.com>. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 17 1月, 2010 1 次提交
-
-
由 Márton Németh 提交于
The ids field of the struct acpi_driver is constant in <linux/acpi/acpi_bus.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: NMárton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 17 12月, 2009 1 次提交
-
-
由 Shaohua Li 提交于
Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 13 10月, 2009 1 次提交
-
-
由 Rafael J. Wysocki 提交于
acpi_get_pci_dev() may be called for a non-PCI device, in which case it should return NULL. However, it assumes that every handle it finds in the ACPI CA name space, between given device handle and the PCI root bridge handle, corresponds to a PCI-to-PCI bridge with an existing secondary bus. For this reason, when it finds a struct pci_dev object corresponding to one of them, it doesn't check if its 'subordinate' field is a valid pointer. This obviously leads to a NULL pointer dereference if acpi_get_pci_dev() is called for a non-PCI device with a PCI parent which is not a bridge. To fix this issue make acpi_get_pci_dev() check if pdev->subordinate is not NULL for every device it finds on the path between the root bridge and the device it's supposed to get to and return NULL if the "target" device cannot be found. http://bugzilla.kernel.org/show_bug.cgi?id=14129 (worked in 2.6.30, regression in 2.6.31) Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Reported-by: NDanny Feng <dfeng@redhat.com> Reviewed-by: NAlex Chiang <achiang@hp.com> Tested-by: Nchepioq <chepioq@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 10 9月, 2009 1 次提交
-
-
由 Alex Chiang 提交于
We can simplify ACPI drivers if we can tell whether a handle is an ACPI PCI root or not. Reviewed-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 29 8月, 2009 1 次提交
-
-
由 Len Brown 提交于
Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 26 6月, 2009 1 次提交
-
-
由 Troy Moure 提交于
ref: http://thread.gmane.org/gmane.linux.kernel/857228/focus=857468 When the ACPI video driver initializes, it does a namespace walk looking for for supported devices. When we find an appropriate handle, we walk up the ACPI tree looking for a PCI root bus, and then walk back down the PCI bus, assuming that every device inbetween is a P2P bridge. This assumption is not correct, and is reported broken on at least: Dell Latitude E6400 ThinkPad X61 Dell XPS M1330 Add a NULL deref check to prevent boot panics. Reported-by: NAlessandro Suardi <alessandro.suardi@gmail.com> Signed-off-by: NTroy Moure <twmoure@szypr.net> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 20 6月, 2009 5 次提交
-
-
由 Bjorn Helgaas 提交于
We never use the PCI device & function number, so remove it to make it clear that it's not needed. Many PCI host bridges don't even appear in config space, so it's meaningless to look at stuff from _ADR, which doesn't exist in that case. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
Using list_for_each_entry() makes traversing the root list easier. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
There's no need to search the list to find the acpi_pci_root structure. We saved it as device->driver_data when we added the device. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
By looking up the segment & bus number earlier, we don't have to worry about cleaning up if it fails. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
To find a host bridge's downstream bus number, we currently look at _BBN first. If _BBN returns a bus number we've already seen, we conclude that _BBN was wrong and look for a bus number in _CRS. However, the spec[1] (figure 5-5 and the example in sec 9.12.1) and an ACPI FAQ[2] suggest that the OS should use _CRS to discover the bus number range, and that _BBN is really intended to bootstrap _CRS methods that reference PCI opregions. This patch makes us always look at _CRS first. If _CRS doesn't supply a bus number, we look at _BBN. If _BBN doesn't exist, we default to zero. This makes the behavior consistent regardless of device discovery order. Previously, if A and B had duplicate _BBNs and we found A first, we'd only look at B's _CRS, whereas if we found B first, we'd only look at A's _CRS. I'm told that Windows discovers host bridge bus numbers using _CRS, so it should be fairly safe to rely on this BIOS functionality. This patch also removes two misleading messages: we printed the "Wrong _BBN value, reboot and use option 'pci=noacpi'" message before looking at _CRS, so we would likely find the bus number in _CRS, the system would work fine, and the user would be confused. The "PCI _CRS %d overrides _BBN 0" message incorrectly assumes _BBN was zero, and it's useless anyway because we print the segment/bus number a few lines later. References: [1] http://www.acpi.info/DOWNLOADS/ACPIspec30b.pdf [2] http://www.acpi.info/acpi_faq.htm _BBN/_CRS discussion http://download.microsoft.com/download/9/8/f/98f3fe47-dfc3-4e74-92a3-088782200fe7/TWAR05005_WinHEC05.ppt (slide 17) http://bugzilla.kernel.org/show_bug.cgi?id=1662 ASUS PR-DLS http://bugzilla.kernel.org/show_bug.cgi?id=1127 ASUS PR-DLSW http://bugzilla.kernel.org/show_bug.cgi?id=1741 ASUS PR-DLS533 Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: NAlex Chiang <achiang@hp.com> CC: Shaohua Li <shaohua.li@intel.com> CC: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 18 6月, 2009 5 次提交
-
-
由 Alexander Chiang 提交于
A PCI domain cannot change as you descend down subordinate buses, which makes the 'segment' argument to acpi_pci_irq_add_prt() useless. Change the interface to take a struct pci_bus *, from whence we can derive the bus number and segment. Reducing the number of arguments makes life simpler for callers. Signed-off-by: NAlex Chiang <achiang@hp.com> Acked-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alexander Chiang 提交于
Now that we can dynamically convert an ACPI CA handle to a struct pci_dev at runtime, there's no need to statically bind them during boot. acpi_pci_bind/unbind are vastly simplified, and are only used to evaluate _PRT methods on P2P bridges and non-bridge children. This patch also changes the time-space tradeoff ever so slightly. Looking up the ACPI-PCI binding is never in the performance path, and by eliminating this caching, we save 24 bytes for each _ADR device in the ACPI namespace. This patch lays further groundwork to eventually eliminate the acpi_driver_ops.bind callback. Signed-off-by: NAlex Chiang <achiang@hp.com> Acked-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alexander Chiang 提交于
Convert an ACPI CA handle to a struct pci_dev. Performing this lookup dynamically allows us to get rid of the ACPI-PCI binding code, which: - eliminates struct acpi_device vs struct pci_dev lifetime issues - lays more groundwork for eliminating .start from acpi_device_ops and thus simplifying ACPI drivers - whacks out a lot of code This change lays the groundwork for eliminating much of pci_bind.c. Although pci_root.c may not be the most logical place for this change, putting it here saves us from having to export acpi_pci_find_root. Signed-off-by: NAlex Chiang <achiang@hp.com> Acked-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alexander Chiang 提交于
Returns whether an ACPI CA node is a PCI root bridge or not. This API is generically useful, and shouldn't just be a hotplug function. The implementation becomes much simpler as well. Signed-off-by: NAlex Chiang <achiang@hp.com> Acked-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alexander Chiang 提交于
acpi_pci_root_add() explicitly assigns device->ops.bind, and later calls acpi_pci_bind_root(), which also does the same thing. We don't need to repeat ourselves; removing the explicit assignment allows us to make acpi_pci_bind() static. Signed-off-by: NAlex Chiang <achiang@hp.com> Acked-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 20 3月, 2009 2 次提交
-
-
由 Kenji Kaneshige 提交于
- Rename pci_osc_control_set() to acpi_pci_osc_control_set() according to the other API names in drivers/acpi/pci_root.c. - Move _OSC related definitions to include/linux/acpi.h because _OSC related API is implemented in drivers/acpi/pci_root.c now. Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: NAndrew Patterson <andrew.patterson@hp.com> Tested-by: NAndrew Patterson <andrew.patterson@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Kenji Kaneshige 提交于
Move PCI _OSC management code from drivers/pci/pci-acpi.c to drivers/acpi/pci_root.c. The benefits are - We no longer need struct osc_data and its management code (contents are moved to struct acpi_pci_root). This simplify the code, and we no longer care about kmalloc() failure. - We can make pci_acpi_osc_support() be a static function, which is called only from drivers/acpi/pci_root.c. Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: NAndrew Patterson <andrew.patterson@hp.com> Tested-by: NAndrew Patterson <andrew.patterson@hp.com> Acked-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 08 1月, 2009 4 次提交
-
-
由 Andrew Patterson 提交于
The _OSC capability OSC_MSI_SUPPORT is set when the root bridge is added with pci_acpi_osc_support(), so we no longer need to do it in the PCI MSI driver. Also adds the function pci_msi_enabled, which returns true if pci=nomsi is not on the kernel command-line. Signed-off-by: NAndrew Patterson <andrew.patterson@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Andrew Patterson 提交于
The _OSC capabilities OSC_ACTIVE_STATE_PWR_SUPPORT and OSC_CLOCK_PWR_CAPABILITY_SUPPORT are set when the root bridge is added with pci_acpi_osc_support(), so we no longer need to do it in the ASPM driver. Also add the function pcie_aspm_enabled, which returns true if pcie_aspm=off is not on the kernel command-line. Signed-off-by: NAndrew Patterson <andrew.patterson@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Andrew Patterson 提交于
The _OSC capability OSC_EXT_PCI_CONFIG_SUPPORT is set when the root bridge is added with pci_acpi_osc_support() if we can access PCI extended config space. This adds the function pci_ext_cfg_avail which returns true if we can access PCI extended config space (offset greater than 0xff). It currently only returns false if arch=x86 and raw_pci_ext_ops is not set (which might happen if pci=nommcfg is set on the kernel command-line). Signed-off-by: NAndrew Patterson <andrew.patterson@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Andrew Patterson 提交于
Add pci_acpi_osc_support() and call it when a PCI bridge is added. This allows us to avoid having every individual PCI root bridge driver call _OSC support for every root bridge in their probe functions, a significant savings in boot time. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 07 11月, 2008 1 次提交
-
-
由 Bjorn Helgaas 提交于
I don't think there's any point in cluttering the code with these. Better to improve the documentation so *anybody* can figure out what layer & level to use. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 11 10月, 2008 2 次提交
-
-
由 Matthew Wilcox 提交于
As of version 2.0, ACPI can return 64-bit integers. The current acpi_evaluate_integer only supports 64-bit integers on 64-bit platforms. Change the argument to take a pointer to an acpi_integer so we support 64-bit integers on all platforms. lenb: replaced use of "acpi_integer" with "unsigned long long" lenb: fixed bug in acpi_thermal_trips_update() Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Pavel Machek 提交于
Catch attempts to use of acpi_driver_data on pointers of wrong type. akpm: rewritten to use proper C typechecking and remove the "function"-used-as-lvalue thing. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 21 2月, 2008 1 次提交
-
-
由 Sam Ravnborg 提交于
Fix following warning: WARNING: vmlinux.o(.text+0x550e85): Section mismatch in reference from the function acpi_pci_root_add() to the function .devinit.text:pci_acpi_scan_root() acpi_pci_root_add uses a __devinit annotated function and it looks like annotating it __devinit too is the correct fix. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 24 7月, 2007 1 次提交
-
-
由 Thomas Renninger 提交于
modpost is going to use these to create e.g. acpi:ACPI0001 in modules.alias. Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NLen Brown <len.brown@intel.com>
-