Re-checking the faulty flag here brings no value.
The comment about "risk" refers to the risk that the device could
be in the process of being removed by ->hot_remove_disk().
However providing that the ->nr_pending count is incremented inside
an rcu_read_locked() region, there is no risk of that happening.

This is because the rdev pointer (in the personalities array) is set
to NULL before synchronize_rcu(), and ->nr_pending is tested
afterwards.  If the rcu_read_locked region happens before the
synchronize_rcu(), the test will see that nr_pending has been incremented.
If it happens afterwards, the rdev pointer will be NULL so there is nothing
to increment.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

When the HOT_REMOVE_DISK ioctl is used to remove a device, we
call remove_and_add_spares() which will remove it from the personality
if possible.  This improves the chances that the removal will succeed.

When writing "remove" to dev-XX/state, we don't.  So that can fail more easily.

So add the remove_and_add_spares() into "remove" handling.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

A performance drop of mkfs has been observed on RAID10 during resync
since commit 09314799 ("md: remove 'go_faster' option from
->sync_request()"). Resync sends so many IOs it slows down non-resync
IOs significantly (few times). Add a short delay to a resync. The
previous long sleep (1s) has proven unnecessary, even very short delay
brings performance right.

The change also applied to raid1. The problem has not been observed on
raid1, however it shares barriers code with raid10 so it might be an
issue for some setup too.
Suggested-by: NNeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20160609134555.GA9104@proton.igk.intel.comSigned-off-by: NTomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: NShaohua Li <shli@fb.com>

This is a simple check before updating the superblock. It should update
the superblock when update_size return 0.
Signed-off-by: NXiao Ni <xni@redhat.com>
Signed-off-by: NShaohua Li <shli@fb.com>

We saw a list corruption in the list all_detected_devices:

 WARNING: CPU: 16 PID: 226 at lib/list_debug.c:29 __list_add+0x3c/0xa9()
 list_add corruption. next->prev should be prev (ffff880859d58320), but was ffff880859ce74c0. (next=ffffffff81abfdb0).
 Modules linked in: ahci libahci libata sd_mod scsi_mod
 CPU: 16 PID: 226 Comm: kworker/u241:4 Not tainted 4.1.20 #1
 Hardware name: Dell Inc. PowerEdge C6220/04GD66, BIOS 2.2.3 11/07/2013
 Workqueue: events_unbound async_run_entry_fn
  0000000000000000 ffff880859a5baf8 ffffffff81502872 ffff880859a5bb48
  0000000000000009 ffff880859a5bb38 ffffffff810692a5 ffff880859ee8828
  ffffffff812ad02c ffff880859d58320 ffffffff81abfdb0 ffff880859eb90c0
 Call Trace:
  [<ffffffff81502872>] dump_stack+0x4d/0x63
  [<ffffffff810692a5>] warn_slowpath_common+0xa1/0xbb
  [<ffffffff812ad02c>] ? __list_add+0x3c/0xa9
  [<ffffffff81069305>] warn_slowpath_fmt+0x46/0x48
  [<ffffffff812ad02c>] __list_add+0x3c/0xa9
  [<ffffffff81406f28>] md_autodetect_dev+0x41/0x62
  [<ffffffff81285862>] rescan_partitions+0x25f/0x29d
  [<ffffffff81506372>] ? mutex_lock+0x13/0x31
  [<ffffffff811a090f>] __blkdev_get+0x1aa/0x3cd
  [<ffffffff811a0b91>] blkdev_get+0x5f/0x294
  [<ffffffff81377ceb>] ? put_device+0x17/0x19
  [<ffffffff8128227c>] ? disk_put_part+0x12/0x14
  [<ffffffff812836f3>] add_disk+0x29d/0x407
  [<ffffffff81384345>] ? __pm_runtime_use_autosuspend+0x5c/0x64
  [<ffffffffa004a724>] sd_probe_async+0x115/0x1af [sd_mod]
  [<ffffffff81083177>] async_run_entry_fn+0x72/0x12c
  [<ffffffff8107c44c>] process_one_work+0x198/0x2ce
  [<ffffffff8107cac7>] worker_thread+0x1dd/0x2bb
  [<ffffffff8107c8ea>] ? cancel_delayed_work_sync+0x15/0x15
  [<ffffffff8107c8ea>] ? cancel_delayed_work_sync+0x15/0x15
  [<ffffffff81080d9c>] kthread+0xae/0xb6
  [<ffffffff81080000>] ? param_array_set+0x40/0xfa
  [<ffffffff81080cee>] ? __kthread_parkme+0x61/0x61
  [<ffffffff81508152>] ret_from_fork+0x42/0x70
  [<ffffffff81080cee>] ? __kthread_parkme+0x61/0x61

I suspect it is because there is no lock protecting this
global list, autostart_arrays() is called in ioctl() path
where there is no lock.

Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NShaohua Li <shli@fb.com>

Signed-off-by: NGuoqing Jiang <gqjiang@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

Add a disk to an array which is performing recovery
is a little complicated, we need to do both reap the
sync thread and perform add disk for the case, then
it caused deadlock as follows.

linux44:~ # ps aux|grep md|grep D
root      1822  0.0  0.0      0     0 ?        D    16:50   0:00 [md127_resync]
root      1848  0.0  0.0  19860   952 pts/0    D+   16:50   0:00 mdadm --manage /dev/md127 --re-add /dev/vdb
linux44:~ # cat /proc/1848/stack
[<ffffffff8107afde>] kthread_stop+0x6e/0x120
[<ffffffffa051ddb0>] md_unregister_thread+0x40/0x80 [md_mod]
[<ffffffffa0526e45>] md_reap_sync_thread+0x15/0x150 [md_mod]
[<ffffffffa05271e0>] action_store+0x260/0x270 [md_mod]
[<ffffffffa05206b4>] md_attr_store+0xb4/0x100 [md_mod]
[<ffffffff81214a7e>] sysfs_write_file+0xbe/0x140
[<ffffffff811a6b98>] vfs_write+0xb8/0x1e0
[<ffffffff811a75b8>] SyS_write+0x48/0xa0
[<ffffffff8152a5c9>] system_call_fastpath+0x16/0x1b
[<00007f068ea1ed30>] 0x7f068ea1ed30
linux44:~ # cat /proc/1822/stack
[<ffffffffa05251a6>] md_do_sync+0x846/0xf40 [md_mod]
[<ffffffffa052402d>] md_thread+0x16d/0x180 [md_mod]
[<ffffffff8107ad94>] kthread+0xb4/0xc0
[<ffffffff8152a518>] ret_from_fork+0x58/0x90

                        Task1848                                Task1822
md_attr_store (held reconfig_mutex by call mddev_lock())
                        action_store
			md_reap_sync_thread
			md_unregister_thread
			kthread_stop                    md_wakeup_thread(mddev->thread);
						wait_event(mddev->sb_wait, !test_bit(MD_CHANGE_PENDING))

md_check_recovery is triggered by wakeup mddev->thread,
but it can't clear MD_CHANGE_PENDING flag since it can't
get lock which was held by md_attr_store already.

To solve the deadlock problem, we move "->resync_finish()"
from md_do_sync to md_reap_sync_thread (after md_update_sb),
also MD_HELD_RESYNC_LOCK is introduced since it is possible
that node can't get resync lock in md_do_sync.

Then we do not need to wait for MD_CHANGE_PENDING is cleared
or not since metadata should be updated after md_update_sb,
so just call resync_finish if MD_HELD_RESYNC_LOCK is set.

We also unified the code after skip label, since set PENDING
for non-clustered case should be harmless.
Reviewed-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NGuoqing Jiang <gqjiang@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

In current handle_stripe_dirtying, the code prefers rmw with
PARITY_ENABLE_RMW; while prefers rcw with PARITY_PREFER_RMW.

This patch reverses this behavior.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NShaohua Li <shli@fb.com>

Commit ff1e22e7 ("xen/events: Mask a moving irq") open-coded
irq_move_irq() but left out checking if the IRQ is disabled. This broke
resuming from suspend since it tries to move a (disabled) irq without
holding the IRQ's desc->lock. Fix it by adding in a check for disabled
IRQs.

The resulting stacktrace was:
kernel BUG at /build/linux-UbQGH5/linux-4.4.0/kernel/irq/migration.c:31!
invalid opcode: 0000 [#1] SMP
Modules linked in: xenfs xen_privcmd ...
CPU: 0 PID: 9 Comm: migration/0 Not tainted 4.4.0-22-generic #39-Ubuntu
Hardware name: Xen HVM domU, BIOS 4.6.1-xs125180 05/04/2016
task: ffff88003d75ee00 ti: ffff88003d7bc000 task.ti: ffff88003d7bc000
RIP: 0010:[<ffffffff810e26e2>]  [<ffffffff810e26e2>] irq_move_masked_irq+0xd2/0xe0
RSP: 0018:ffff88003d7bfc50  EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88003d40ba00 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000100 RDI: ffff88003d40bad8
RBP: ffff88003d7bfc68 R08: 0000000000000000 R09: ffff88003d000000
R10: 0000000000000000 R11: 000000000000023c R12: ffff88003d40bad0
R13: ffffffff81f3a4a0 R14: 0000000000000010 R15: 00000000ffffffff
FS:  0000000000000000(0000) GS:ffff88003da00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd4264de624 CR3: 0000000037922000 CR4: 00000000003406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
 ffff88003d40ba38 0000000000000024 0000000000000000 ffff88003d7bfca0
 ffffffff814c8d92 00000010813ef89d 00000000805ea732 0000000000000009
 0000000000000024 ffff88003cc39b80 ffff88003d7bfce0 ffffffff814c8f66
Call Trace:
 [<ffffffff814c8d92>] eoi_pirq+0xb2/0xf0
 [<ffffffff814c8f66>] __startup_pirq+0xe6/0x150
 [<ffffffff814ca659>] xen_irq_resume+0x319/0x360
 [<ffffffff814c7e75>] xen_suspend+0xb5/0x180
 [<ffffffff81120155>] multi_cpu_stop+0xb5/0xe0
 [<ffffffff811200a0>] ? cpu_stop_queue_work+0x80/0x80
 [<ffffffff811203d0>] cpu_stopper_thread+0xb0/0x140
 [<ffffffff810a94e6>] ? finish_task_switch+0x76/0x220
 [<ffffffff810ca731>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20
 [<ffffffff810a3935>] smpboot_thread_fn+0x105/0x160
 [<ffffffff810a3830>] ? sort_range+0x30/0x30
 [<ffffffff810a0588>] kthread+0xd8/0xf0
 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0
 [<ffffffff8182568f>] ret_from_fork+0x3f/0x70
 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0
Signed-off-by: NRoss Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

The XEN UEFI code has become available on the ARM architecture
recently, but now causes a link-time warning:

ld: warning: drivers/xen/efi.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail

This seems harmless, because the efi code only uses 2-byte
characters when interacting with EFI, so we don't pass on those
strings to elsewhere in the system, and we just need to
silence the warning.

It is not clear to me whether we actually need to build the file
with the -fshort-wchar flag, but if we do, then we should also
pass --no-wchar-size-warning to the linker, to avoid the warning.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NStefano Stabellini <sstabellini@kernel.org>
Fixes: 37060935dc04 ("ARM64: XEN: Add a function to initialize Xen specific UEFI runtime services")

IOCTL_GNTDEV_GRANT_COPY batches copy operations to reduce the number
of hypercalls.  The stack is used to avoid a memory allocation in a
hot path. However, a batch size of 24 requires more than 1024 bytes of
stack which in some configurations causes a compiler warning.

    xen/gntdev.c: In function ‘gntdev_ioctl_grant_copy’:
    xen/gntdev.c:949:1: warning: the frame size of 1248 bytes is
    larger than 1024 bytes [-Wframe-larger-than=]

This is a harmless warning as there is still plenty of stack spare,
but people keep trying to "fix" it.  Reduce the batch size to 16 to
reduce stack usage to less than 1024 bytes.  This should have minimal
impact on performance.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

amdgpu_mn_get which is called during ioct path relies on mmap_sem for
write.  If the waiting task gets killed by the oom killer it would block
oom_reaper from asynchronous address space reclaim and reduce the
chances of timely OOM resolving.  Wait for the lock in the killable mode
and return with EINTR if the task got killed while waiting.

[arnd@arndb.de: use ERR_PTR() to return from amdgpu_mn_get]
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

radeon_mn_get which is called during ioct path relies on mmap_sem for
write.  If the waiting task gets killed by the oom killer it would block
oom_reaper from asynchronous address space reclaim and reduce the
chances of timely OOM resolving.  Wait for the lock in the killable mode
and return with EINTR if the task got killed while waiting.
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

i915_gem_mmap_ioctl relies on mmap_sem for write.  If the waiting task
gets killed by the oom killer it would block oom_reaper from
asynchronous address space reclaim and reduce the chances of timely OOM
resolving.  Wait for the lock in the killable mode and return with EINTR
if the task got killed while waiting.
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use kmemdup when some other buffer is immediately copied into allocated
region.  It replaces call to allocation followed by memcpy, by a single
call to kmemdup.

[akpm@linux-foundation.org: remove unneeded cast to void*]
Link: http://lkml.kernel.org/r/1463665743-16269-1-git-send-email-falakreyaz@gmail.comSigned-off-by: NMuhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

First version of this patch has already been posted to LKML by Ben
Hutchings ~6 months ago, but no further action were performed.

Ben's original message:

: rtsx_usb_ms creates a task that mostly sleeps, but tasks in
: uninterruptible sleep still contribute to the load average (for
: bug-compatibility with Unix).  A load average of ~1 on a system that
: should be idle is somewhat alarming.
:
: Change the sleep to be interruptible, but still ignore signals.

References: https://bugs.debian.org/765717
Link: http://lkml.kernel.org/r/b49f95ae83057efa5d96f532803cba47@natalenko.nameSigned-off-by: NOleksandr Natalenko <oleksandr@natalenko.name>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Roger Tseng <rogerable@realtek.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The tiled 5K Dell monitor appears to be hiding it's tiled mode
inside the displayid timings block, this patch parses this
blocks and adds the modes to the modelist.

v1.1: add missing __packed.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95207Signed-off-by: NDave Airlie <airlied@redhat.com>

We need to use this for validating modeline additions.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This will iterate over all DisplayID blocks found in the buffer.
Previously only the first block was parsed.

https://bugs.freedesktop.org/show_bug.cgi?id=95207Signed-off-by: NTomas Bzatek <tomas@bzatek.net>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This just makes the code easier to follow.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

I'm looking at trying to possibly merge the 32-bit and 64-bit versions
of the x86 uaccess.h implementation, but first this needs to be cleaned
up.

For example, the 32-bit version of "__copy_to_user_inatomic()" is mostly
the special cases for the constant size, and it's actually never
relevant.  Every user except for one aren't actually using a constant
size anyway, and the one user that uses it is better off just using
__put_user() instead.

So get rid of the unnecessary complexity.

[ The same cleanup should likely happen to __copy_from_user_inatomic()
  as well, but that one has a lot more users that I need to take a look
  at first ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Everything should be LE when using virtio-1, but
the linux balloon driver does not seem to care about that.
Reported-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>

The ndctl unit tests discovered that the dax enabling omitted updates to
nd_detach_and_reset().  This routine clears device the configuration
when the namespace is detached.  Without this clearing userspace may
assume that the device is in the process of being configured by another
agent in the system.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Testing the dax-device autodetect support revealed a probe failure with
the following result:

    dax0.1: bad offset: 0x8200000 dax disabled

The original pfn-device implementation inferred the alignment from
ilog2(offset), now that the alignment is explicit the is_power_of_2()
needs replacing with a real sanity check against the recorded alignment.
Otherwise the alignment check is useless in the implicit case and only
the minimum size of the offset matters.

This self-consistency check is further validated by the probe path that
will re-check that the offset is large enough to contain all the
metadata required to enable the device.

Cc: <stable@vger.kernel.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This module is loaded by the related mfd driver which has
the needed MODULE_DEVICE_TABLE(i2c,...).

This patch fix the modalias when the rtc driver is built
as a module, so the right name is used.
Everything operates correctly when this module is builtin.

Fixes: esdc59ed38 ("rtc: add RTC driver for TPS6586x")
Signed-off-by: NNicolas Chauvet <kwizart@gmail.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

The added support for SPI mode made it possible to configure the driver
when I2C is disabled, leaving an unused device table:

drivers/rtc/rtc-rv3029c2.c:794:29: error: 'rv3029_id' defined but not used [-Werror=unused-variable]

This moves the table inside of the #ifdef section that has the
only user, to avoid the harmless warning.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: d08f50dd0afc ("rtc: rv3029: Add support of RV3049")
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

The R2025SD chip, according to its data sheet, sets the /XST
bit to zero if the oscillator stops. Hence the check for this
condition was wrong.
Signed-off-by: NThomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Add the alarm IRQ functionality.
Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

The bin2bcd function in set_time is uncorrect on weekdays as the
bit mask should be done at the end of arithmetic operations.
Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

The RTC RV3029 handles different types of alarms : seconds, minutes, ...
These alarms can be enabled or disabled individually using an AE_x bit
which is the last bit (BIT(7)) on each alarm registers.

To prepare the alarm IRQ support, the current code enables all the alarm
types by setting each AE_x to 1.
It also fixes others alarms issues :
   - month and weekday errors : it was performing -1 instead of +1.
   - wrong use of bit mask with bin2bcd
Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Remove some checks from checkpatch such as spaces around arithmetic
operations or prefer "unsigned int".
Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Add support of Microcrystal RV3049 RTC (SPI) using regmap on the
RV3029 (I2C) driver.
Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

To add support of rv3049, the current driver is converted to use regmap.
Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

To prepare the use of regmap to add the support of RV-3049, all the
'i2c' in functions's names are removed.
Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

For autodetecting a previously established dax configuration we need the
info block to indicate block-device vs device-dax mode, and we need to
have the default namespace probe hand-off the configuration to the
dax_pmem driver.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

ida instances allocate some internal memory for ->free_bitmap in
addition to the base 'struct ida'.  Use ida_destroy() to release that
memory at module_exit().
Reported-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The "Device DAX" core enables dax mappings of performance / feature
differentiated memory.  An open mapping or file handle keeps the backing
struct device live, but new mappings are only possible while the device
is enabled.   Faults are handled under rcu_read_lock to synchronize
with the enabled state of the device.

Similar to the filesystem-dax case the backing memory may optionally
have struct page entries.  However, unlike fs-dax there is no support
for private mappings, or mappings that are not backed by media (see
use of zero-page in fs-dax).

Mappings are always guaranteed to match the alignment of the dax_region.
If the dax_region is configured to have a 2MB alignment, all mappings
are guaranteed to be backed by a pmd entry.  Contrast this determinism
with the fs-dax case where pmd mappings are opportunistic.  If userspace
attempts to force a misaligned mapping, the driver will fail the mmap
attempt.  See dax_dev_check_vma() for other scenarios that are rejected,
like MAP_PRIVATE mappings.

Cc: Hannes Reinecke <hare@suse.de>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Device DAX is the device-centric analogue of Filesystem DAX
(CONFIG_FS_DAX).  It allows memory ranges to be allocated and mapped
without need of an intervening file system.  Device DAX is strict,
precise and predictable.  Specifically this interface:

1/ Guarantees fault granularity with respect to a given page size (pte,
pmd, or pud) set at configuration time.

2/ Enforces deterministic behavior by being strict about what fault
scenarios are supported.

For example, by forcing MADV_DONTFORK semantics and omitting MAP_PRIVATE
support device-dax guarantees that a mapping always behaves/performs the
same once established.  It is the "what you see is what you get" access
mechanism to differentiated memory vs filesystem DAX which has
filesystem specific implementation semantics.

Persistent memory is the first target, but the mechanism is also
targeted for exclusive allocations of performance differentiated memory
ranges.

This commit is limited to the base device driver infrastructure to
associate a dax device with pmem range.

Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Fix following warning:
aeroflex/greth.c:1326:11: warning: unused variable 'phy' [-Wunused-variable]

The variable was unused - remove it.
It looks like this warning has been there forever - was found by an
allyesconfig build of sparc32.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warnings:
openprom.c:510:2: warning: 'tmp' may be used uninitialized in this function [-Wmaybe-uninitialized]
openprom.c:503:3: warning: 'str' may be used uninitialized in this function [-Wmaybe-uninitialized]
openprom.c:459:8: warning: 'str' may be used uninitialized in this function [-Wmaybe-uninitialized]
openprom.c:422:7: warning: 'str' may be used uninitialized in this function [-Wmaybe-uninitialized]

Fixed by introducing PTR_ERR etc.
This simplified the code as a nice side effect.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>