By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Reviewed-by: NTomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Fix the following compile warning:

mv_u3d_core.c:1766:12: warning: 'mv_u3d_remove' \
	defined but not used [-Wunused-function]
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can remove some
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we drop some boilerplate
code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we drop some boilerplate
code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

By simply setting a flag, we can delete a little
boilerplate code.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

We don't need to register that device ourselves
if we simply set gadget->register_my_device.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Currently all UDC drivers are calling
device_register() before calling
usb_add_gadget_udc(). In order to avoid
code duplication, we can allow udc-core.c
register that device.

However that would become a really large patch,
so to cope with the meanwhile and allow us
to write bite-sized patches, we're adding
a flag which will be set by UDC driver once
it removes the code for registering the
gadget device.

Once all are converted, the new flag will
be removed.
Reviewed-by: NTomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Now that we have drivers for omap-usb2 phy and omap-usb3 phy, stop
using nop-usb-xceiv.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

omap5 is not going to have support for non-dt boot making the platform
data associated with dwc3 useless. Removed it here.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Includes few minor fixes in dwc3-omap like populating the compatible
string in a correct way, extracting the utmi-mode property properly and
changing the index of get_irq since irq of core is removed from hwmod
entry.

Also updated the documentation with dwc3-omap device tree binding
information.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>

[ balbi@ti.com : fix a compile warning introduced by
	this commit ]
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Add 2 flags, needs_vcc and needs_reset to platform data.
If the flag is set and the regulator couldn't be found
then we bail out with -EPROBE_DEFER.

For device tree boot we depend on presensce of vcc-supply/
reset-supply properties to decide if we should bail out
with -EPROBE_DEFER or just continue in case the regulator
can't be found.

This is required for proper functionality in cases where the
regulator is needed but is probed later than the PHY device.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The PHY clock, clock rate, VCC regulator and RESET regulator
can now be provided via device tree.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

We would need to support multiple PHYs of the same type
so use the new PHY API usb_add_phy_dev() to register the PHY.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

We expect the RESET line to be modeled as a regulator with supply
name "reset". The regulator should be modeled such that enabling
the regulator brings the PHY device out of RESET and disabling the
regulator holds the device in RESET.

They PHY will be held in RESET in .shutdown() and brought out of
RESET in .init().
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

We use "vcc" as the supply name for the PHY's power supply.
The power supply will be enabled during .init() and disabled
during .shutdown()
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

If the PHY has a clock associated to it then manage the clock.
We just enable the clock in .init() and disable it in .shutdown().

Add clk_rate parameter in platform data and configure the
clock rate during probe if supplied.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Use resource managed kzalloc.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Add clk_rate parameter to platform data. If supplied, the
NOP phy driver will program the clock to that rate during probe.

Also add 2 flags, needs_vcc and needs_reset.
If the flag is set and the regulator couldn't be found
then the driver will bail out with -EPROBE_DEFER.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") introduces a link failure since
perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL:

	arch/x86/power/built-in.o: In function `restore_processor_state':
	(.text+0x45c): undefined reference to `perf_restore_debug_store'

Fix it by defining the dummy function appropriately.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") fixed a crash when doing PEBS performance profiling
after resuming, but in using init_debug_store_on_cpu() to restore the
DS_AREA mtrr it also resulted in a new WARN_ON() triggering.

init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU
cross-calls to do the MSR update.  Which is not really valid at the
early resume stage, and the warning is quite reasonable.  Now, it all
happens to _work_, for the simple reason that smp_call_function_single()
ends up just doing the call directly on the CPU when the CPU number
matches, but we really should just do the wrmsr() directly instead.

This duplicates the wrmsr() logic, but hopefully we can just remove the
wrmsr_on_cpu() version eventually.
Reported-and-tested-by: NParag Warudkar <parag.lkml@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull btrfs fixes from Chris Mason:
 "Eric's rcu barrier patch fixes a long standing problem with our
  unmount code hanging on to devices in workqueue helpers.  Liu Bo
  nailed down a difficult assertion for in-memory extent mappings."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix warning of free_extent_map
  Btrfs: fix warning when creating snapshots
  Btrfs: return as soon as possible when edquot happens
  Btrfs: return EIO if we have extent tree corruption
  btrfs: use rcu_barrier() to wait for bdev puts at unmount
  Btrfs: remove btrfs_try_spin_lock
  Btrfs: get better concurrency for snapshot-aware defrag work