Signed-off-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>

At this point, there is nothing left to fail.  And submit already has a
fence assigned and is added to the submit_list.  Any problems from here
on out are asynchronous (ie. hangcheck/recovery).
Signed-off-by: NRob Clark <robdclark@gmail.com>

The MDP4 driver tries to request and set voltages for regulators required
by the DSI PLLs.

Firstly, the MDP4 driver shouldn't manage the DSI regulators, this should
be handled in the DSI driver. Secondly, it shouldn't try to set a fixed
voltage for regulators. Voltage constraints should be specified on the
regulator via DT and managed by the regulator core.

Remove all the DSI PLL regulator related code from the MDP4 driver. It's
managed in the DSI driver for MSM8960/APQ8064 already.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The eDP driver tries to set a fixed voltage for one of its regulators(vdda)
before enabling it. This shouldn't be done by the driver, the voltage
constraints should be specified on the regulator via DT and managed by
the regulator core. A driver should call regulator_set_voltage only if
it needs to change the voltage during runtime. Drop the
regulator_set_voltage call. Mention in a comment the voltage that the
regulator expects.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The voltage changing code in this driver is broken and should be
removed.  The driver sets a single, exact voltage on probe.  Unless
there is a very good reason for this (which should be documented in
comments) constraints like this need to be set via the machine
constraints, voltage setting in a driver is expected to be used in cases
where the voltage varies at runtime.

In addition client drivers should almost never be calling
regulator_can_set_voltage(), if the device needs to set a voltage it
needs to set the voltage and the regulator core will handle the case
where the regulator is fixed voltage.  If the driver simply skips
setting the voltage if it doesn't have permission then it should just
not bother in the first place.

Originally authored by Mark Brown <broonie@kernel.org>

Remove the min/max voltage data entries per SoC managed by the driver.
These aren't needed as we don't try to set voltages any more. Mention in
comments the voltages that each regulator expects.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Here, a location is reset to NULL before being passed to PTR_ERR.
So, PTR_ERR should be called before its argument is reassigned
to NULL. Further to simplify things use PTR_ERR_OR_ZERO instead
of PTR_ERR and IS_ERR.

Problem found using Coccinelle.
Signed-off-by: NVaishali Thakkar <vaishali.thakkar@oracle.com>
Reviewed-by: NEric Engestrom <eric.engestrom@imgtec.com>
[fixed fmt string warning (s/%ld/%d/)]
Signed-off-by: NRob Clark <robdclark@gmail.com>

Android needs XBGR8888 format. Add all the missing 32-bpp formats
without alpha for completeness.

Cc: Archit Taneja <architt@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Reviewed-by: NArchit Taneja  <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

A recent cleanup removed the only user of the 'kms' variable in
msm_preclose(), causing a harmless compiler warning:

drivers/gpu/drm/msm/msm_drv.c: In function 'msm_preclose':
drivers/gpu/drm/msm/msm_drv.c:468:18: error: unused variable 'kms' [-Werror=unused-variable]

This removes the variable as well.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: 4016260b ("drm/msm: fix bug after preclose removal")
Signed-off-by: NRob Clark <robdclark@gmail.com>

It is no longer true that we discard all in-flight submits on recover
(these days we only discard the first one that hung).  After the first
re-submitted batch completes it would overwrite the fence with a correct
value, but there would be a window of time which showed all re-submitted
batches as already complete.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>

This was only used for atomic commit these days.  So instead just give
atomic it's own work-queue where we can do a block on each bo in turn.
Simplifies things a whole bunch and makes the 'struct fence' conversion
easier.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Better encapsulate the per-timeline stuff into fence-context.  For now
there is just a single fence-context, but eventually we'll also have one
per-CRTC to enable fully explicit fencing.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Split up locking and pinning buffers in the submit path.  This is needed
because we'll want to insert fencing in between the two steps.

This makes things end up looking more similar to etnaviv submit code
(which was originally modelled on the msm code but has already added
'struct fence' support).
Signed-off-by: NRob Clark <robdclark@gmail.com>

Since we already track the array of bo's in the submit object, just
unconditionally take and drop ref's per submit (rather than only taking
ref's if bo is not already active).  This simplifies later patches.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>

This was always the intention, but somehow it was never wired up
properly.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>

In the atomic modesetting path, each driver simply wants to grab a ref
to the exclusive fence from a reservation object to store in the incoming
drm_plane_state, without doing the whole RCU dance.  Since each driver
will need to do this, lets make a helper.

v2: rename to _rcu instead of _unlocked to be more consistent
Signed-off-by: NRob Clark <robdclark@gmail.com>
Acked-by: NSumit Semwal <sumit.semwal@linaro.org>

It is already optional at runtime.  But this at least simplifies
backports to kernels without QCOM_SCM.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Don't just free the connector when we get the destroy callback.

Drop a reference to it, and set it's mst_port to NULL so
no more mst work is done on it.

v2: core mst accepts NULLs fine. Cleanup EDID code properly.
v3: drop the extra reference we were taking.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Take a reference when setting a crtc on a connecter,
also take one when duplicating if a crtc is set,
and drop one on destroy if a crtc is set.

v2: take Daniel Stone's advice and simplify the
ref/unref dances, also take care of NULL as connector
to state reset.

v3: remove need for connector NULL check.
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This just takes a reference on the connector when we set a mode
in the non-atomic paths.

v2: Follow Daniel Stone's suggestions on when to take/drop
references.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This takes a reference count when fbdev adds the connector,
and drops it when it removes the connector.

It also drops the now unneeded code to find connectors
and remove the from the modeset as they are reference counted.

v2: drop references when removing all connectors at end.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This uses the previous changes to add reference counts
to drm connector objects.

v2: move fbdev changes to their own patch.
add some kerneldoc
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Ofc I promise just a few leftovers for drm-misc and somehow it's the
biggest pull. But really mostly trivial stuff:
- MAINTAINERS updates from Emil
- rename async to nonblock in atomic_commit to avoid the confusion between
  nonblocking ioctl and async flip (= not vblank synced), from Maarten.
  Needs to be regened with newer drivers, but probably only after -rc1 to
  catch them all.
- actually lockless gem_object_free, plus acked driver conversion patches.
  All the trickier prep stuff already is in drm-next.
- Noralf's nice work for generic defio support in our fbdev emulation.
  Keeps the udl hack, and qxl is tested by Gerd.

* tag 'topic/drm-misc-2016-05-04' of git://anongit.freedesktop.org/drm-intel: (47 commits)
  drm: Fixup locking WARN_ON mistake around gem_object_free_unlocked
  drm/etnaviv: Use lockless gem BO free callback
  drm/imx: Use lockless gem BO free callback
  drm/radeon: Use lockless gem BO free callback
  drm/amdgpu: Use lockless gem BO free callback
  drm/gem: support BO freeing without dev->struct_mutex
  MAINTAINERS: Add myself for the new VC4 (RPi GPU) graphics driver.
  MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers
  MAINTAINERS: Add a few DRM drivers by Dave Airlie
  MAINTAINERS: List the correct git repo for the Renesas DRM drivers
  MAINTAINERS: Update the files list for the Renesas DRM drivers
  MAINTAINERS: Update the files list for the Armada DRM driver
  MAINTAINERS: Update the files list for the Rockchip DRM driver
  MAINTAINERS: Update the files list for the Exynos DRM driver
  MAINTAINERS: Add maintainer entry for the VMWGFX DRM driver
  MAINTAINERS: Add maintainer entry for the MSM DRM driver
  MAINTAINERS: Add maintainer entry for the Nouveau DRM driver
  MAINTAINERS: Update the files list for the Etnaviv DRM driver
  MAINTAINERS: Remove unneded wildcard for the i915 DRM driver
  drm/atomic: Add WARN_ON when state->acquire_ctx is not set.
  ...

Embarrassingly while fixing up the old paths for i915 I managed to
misplace a locking check for the new _unlocked paths. That's what I
get for not retesting on radeon.

Fixes: 9f0ba539 ("drm/gem: support BO freeing without dev->struct_mutex")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

No dev->struct_mutex anywhere to be seen.

Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Acked-by: NLucas Stach <l.stach@pengutronix.de>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-17-git-send-email-daniel.vetter@ffwll.ch

No dev->struct_mutex anywhere to be seen.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-20-git-send-email-daniel.vetter@ffwll.ch

No dev->struct_mutex anywhere to be seen.

Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-24-git-send-email-daniel.vetter@ffwll.ch

No dev->struct_mutex anywhere to be seen.

Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-11-git-send-email-daniel.vetter@ffwll.ch

Finally all the core gem and a lot of drivers are entirely free of
dev->struct_mutex depencies, and we can start to have an entirely
lockless unref path.

To make sure that no one who touches the core code accidentally breaks
existing drivers which still require dev->struct_mutex I've made the
might_lock check unconditional.

While at it de-inline the ref/unref functions, they've become a bit
too big.

v2: Make it not leak like a sieve.

v3: Review from Lucas:
- drop != NULL in pointer checks.
- fixup copypasted kerneldoc to actually match the functions.

v4:
Add __drm_gem_object_unreference as a fastpath helper for drivers who
abolished dev->struct_mutex, requested by Chris.

v5: Fix silly mistake in drm_gem_object_unreference_unlocked caught by
intel-gfx CI - I checked for gem_free_object instead of
gem_free_object_unlocked ...

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> (v3)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4)
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462178451-1765-1-git-send-email-daniel.vetter@ffwll.ch

drm-hisilicon-next for 4.7

Add new hisilicon kirin drm driver:
- Add maintainer for hisilicon DRM driver
- Add support for external bridge
- Add designware dsi host driver
- Add designware dsi encoder driver
- Add cma fbdev and hotplug
- Add vblank driver for ADE
- Add plane driver for ADE
- Add crtc driver for ADE
- Add hisilicon kirin drm master driver
- Add device tree binding for hi6220 display subsystem

* tag 'drm-hisilicon-next-2016-04-29' of github.com:xin3liang/linux:
  MAINTAINERS: Add maintainer for hisilicon DRM driver
  drm/hisilicon: Add support for external bridge
  drm/hisilicon: Add designware dsi host driver
  drm/hisilicon: Add designware dsi encoder driver
  drm/hisilicon: Add cma fbdev and hotplug
  drm/hisilicon: Add vblank driver for ADE
  drm/hisilicon: Add plane driver for ADE
  drm/hisilicon: Add crtc driver for ADE
  drm/hisilicon: Add hisilicon kirin drm master driver
  drm/hisilicon: Add device tree binding for hi6220 display subsystem

Here are a few amdkfd patches for 4.7, all of them fixes according to
the Coccinelle tool.

* tag 'drm-amdkfd-next-2016-05-04' of git://people.freedesktop.org/~gabbayo/linux:
  amdkfd: Trim unnescessary intermediate err var in kfd_chardev.c
  amdkfd: Trim off unnescessary semicolon from kfd_packet_manager.c
  amdkfd: Use the canonical form in branch predicates

Merge branch 'drm-rockchip-next-fixes-05-03' of https://github.com/markyzq/kernel-drm-rockchip into drm-next

Here are some little fixes for rockchip drm, looks good for me, and seems there is no doubt on them, So I'd like you can land them.

* 'drm-rockchip-next-fixes-05-03' of https://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: vop: Initialize vskiplines to zero
  drm/rockchip: vop: fix iommu crash with async atomic
  drm/rockchip: support non-iommu buffer path
  drm/rockchip: get rid of rockchip_drm_crtc_mode_config
  drm/rockchip: inno_hdmi: fix an error code
  drm/rockchip: don't leak iommu mapping
  drm/rockchip: remove redundant statement

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Summary:
 - Support for pipeline clock between KMS drivers.
   . Exynos SoC is required to control clocks across KMS drivers
     according to Exynos SoC version. So this patch refactos
     some relevant codes and provides generic solution for it.
 - Add Exynos5433 SoC support to HDMI parts - HDMI and DECON-TV.
 - Add HW trigger mode support to CRTC drivers.
   . In case of using i80 Panel, some Exynos SoC supports HW trigger
     mode so this patch makes trigger mode - HW or SW trigger - to be
     set according to SoC version properly.
 - And some cleanups and regression fixups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (39 commits)
  drm/exynos: clean up register definions for fimd and decon
  drm/exynos: decon: clean up interface type
  drm/exynos: fimd: add HW trigger support
  drm/exynos: clean up wait_for_vblank
  drm/exynos: mixer: use generic of_device_get_match_data helper
  drm/exynos: mixer: remove support for non-dt platforms
  drm/exynos: hdmi: use generic of_device_get_match_data helper
  drm/exynos: rotator: use generic of_device_get_match_data helper
  drm/exynos: fimd: use generic of_device_get_match_data helper
  drm/exynos: dsi: use generic of_device_get_match_data helper
  drm/exynos: exynos5433_decon: use generic of_device_get_match_data helper
  drm/exynos: convert clock_enable crtc callback to pipeline clock
  drm/exynos/mixer: enable HDMI-PHY before configuring MIXER
  drm/exynos/decon5433: enable HDMI-PHY before configuring DECON
  drm/exynos: add support for pipeline clock to the framework
  drm/exynos: add helper to get crtc from pipe
  drm/exynos/decon5433: do not protect window in plane disable
  drm/exynos/decon5433: reset decon on start
  drm/exynos/decon5433: fix DECON standalone update
  drm/exynos/hdmi: remove registry dump
  ...

This pull request brings in DPI panel support, gamma ramp support, and
render nodes for vc4.

* tag 'drm-vc4-next-2016-05-02' of https://github.com/anholt/linux:
  drm/vc4: Add missing render node support
  drm/vc4: Add support for gamma ramps.
  drm/vc4: Fix NULL deref in HDMI init error path
  drm/vc4: Add DPI driver
  drm: Add an encoder and connector type enum for DPI.

- prep work for struct_mutex-less gem_free_object
- more invasive/tricky mst fixes from Lyude for broken hw. I discussed
  this with Ville/Jani and we all agreed more soaking in -next would be
  real good this late in the -rc cycle. They're cc: stable too to make
  sure they're not getting lost. Feel free to cherry-pick those four if
  you disagree.
- few small things all over

* tag 'topic/drm-misc-2016-04-29' of git://anongit.freedesktop.org/drm-intel:
  drm/atomic: Add missing drm_crtc_internal.h include
  drm/dp: Allow signals to interrupt drm_aux-dev reads/writes
  drm: Quiet down drm_mode_getresources
  drm: Quiet down drm_mode_getconnector
  drm: Protect dev->filelist with its own mutex
  drm: Make drm_vm_open/close_locked private to drm_vm.c
  drm: Hide master MAP cleanup in drm_bufs.c
  drm: Forbid legacy MAP functions for DRIVER_MODESET
  drm: Push struct_mutex into ->master_destroy
  drm: Move drm_getmap into drm_bufs.c and give it a legacy prefix
  drm: Put legacy lastclose work into drm_legacy_dev_reinit
  drm: Give drm_agp_clear drm_legacy_ prefix
  drm/sysfs: Annote lockless show functions with READ_ONCE
  MAINTAINERS: Update the files list for the GMA500 DRM driver
  drm: rcar-du: Fix compilation warning
  drm/i915: Get rid of intel_dp_dpcd_read_wake()
  drm/dp_helper: Perform throw-away read before actual read in drm_dp_dpcd_read()
  drm/dp_helper: Retry aux transactions on all errors
  drm/dp_helper: Always wait before retrying native aux transactions