This will be useful for out-of-tree drivers since in-tree drivers
could select it automatically.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This will be useful for out-of-tree drivers since in-tree drivers
could select it automatically.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Now ASoC core is getting the intersection of supported formats not only
from CPU and CODEC dai's but also from DMA's. However, there should be
no specific width limitation from SDMA side.

So drop it. Otherwise, we would only support S16_LE format for all i.MX
platforms.
Signed-off-by: NNicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Hopefully fixing a build failure reported by Stephen Rothwell - though
quite why the other OF headers don't include this as well I'm not sure.
Signed-off-by: NMark Brown <broonie@linaro.org>

Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Acked-by: NNicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Acked-by: NNicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Acked-by: NNicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use the precise definition of 'ret', which will be used for
the error check.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Acked-by: NNicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch allow to select individual common sound options and
as a result allow using sound cards/codecs based on DT description.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch provide separation of the main audio options and boards.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NMark Brown <broonie@linaro.org>

IB_NF, NB_IF and IB_IF configured the bc polarity incorrectly. The receive
polarity was set to the same edge as the TX in these cases.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

PCM and S/PDIF drivers referenced mach headers for a trivial
data structure. This caused build errors on multiplatform builds
as machine headers are not accessible from driver files. Move the data
structure definition to the driver header and remove the dependency.
While at it rename the structure to avoid multiple definition errors
as the same structure is also used by the platform code.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

The BCP bit in TCR4/RCR4 register rules as followings:
  0 Bit clock is active high with drive outputs on rising edge
    and sample inputs on falling edge.
  1 Bit clock is active low with drive outputs on falling edge
    and sample inputs on rising edge.

For all formats currently supported in the fsl_sai driver, they're exactly
sending data on the falling edge and sampling on the rising edge.

However, the driver clears this BCP bit for all of them which results click
noise when working with SGTL5000 and big noise with WM8962.

Thus this patch corrects the BCP settings for all the formats here to fix
the nosie issue.
Signed-off-by: NNicolin Chen <Guangyu.Chen@freescale.com>
Acked-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

DA732X_ID_MAJOR_MASK is 0xF0, so the major id is
(reg & DA732X_ID_MAJOR_MASK) >> 4.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

BIT[0:2] of register 01h is REVID, so the mask for REVID should be 0x7.
Also updates the code to use CS42L52_CHIP_REV_MASK.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NBrian Austin <brian.austin@cirrus.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Commit 5d6be5aa ("ASoC: codec: Simplify ASoC probe code.") left variable
'ret', whose value is returned, uninitialized. Since it is not used
otherwise, remove it.
Signed-off-by: NChristoph Jaeger <christophjaeger@linux.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Fix checking return value of regmap_read().
Also fix reporting the chip_id value. CS42XX8_CHIPID_CHIP_ID_MASK is 0xF0,
so the chip_id value is (val & CS42XX8_CHIPID_CHIP_ID_MASK) >> 4).
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NPaul Handrigan <paul.handrigan@cirrus.com>
Acked-by: NBrian Austin <brian.austin@cirrus.com>
Acked-by: NNicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Add a device tree match table. This serves to make the driver's support
of device tree more explicit. Perhaps the fallback for DT matching to
using the i2c_device_id table will go away one day, since it fails in
face of devices from different vendors with the same name.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Add a device tree match table. This serves to make the driver's support
of device tree more explicit. Perhaps the fallback for DT matching to
using the i2c_device_id table will go away one day, since it fails in
face of devices from different vendors with the same name.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Add a device tree match table. This serves to make the driver's support
of device tree more explicit. Perhaps the fallback for DT matching to
using the i2c_device_id table will go away one day, since it fails in
face of devices from different vendors with the same name.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

alc5632_probe() returns ret, yet it is not initialized or set anywhere.
This ends up causing the function to appear to fail, and audio not to
work on the Toshiba AC100, with my compiler at least.

This function used to set ret in all cases, but recent cleanup removed
that.

Fixes: 5d6be5aa ("ASoC: codec: Simplify ASoC probe code.")
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Add a device tree match table. This serves to make the driver's support
of device tree more explicit. Perhaps the fallback for DT matching to
using the i2c_device_id table will go away one day, since it fails in
face of devices from different vendors with the same name.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

It's quite cricial to clear error flags because SAI might hang if getting
FIFO underrun during playback (I haven't confirmed the same issue on Rx
overflow though).

So this patch enables those irq and adds isr() to clear the flags so as to
keep playback entirely safe.
Signed-off-by: NNicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

On Tegra the convention is to have a single machine driver
that's controlling the whole audio subsystem.

Move the clock handling to the machine driver, to be in line
with the other Tegra drivers and give the machine driver
full control over the single Tegra audio PLL.
Signed-off-by: NLucas Stach <dev@lynxeye.de>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Some simple audio cards may have many DAI links.
This patch extends the simple-card driver for handling such cards.
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMark Brown <broonie@linaro.org>

The DAI link array and the properties (fmt, sysclk slots) are
hard-coded for a single CPU / CODEC link.

This patch dynamically allocates the DAI link array and the
properties with the aim of supporting many DAI links.
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch add .xlate_tdm_slot_mask support for IMX SSI, and this
will generate the TDM slot TX and RX masks.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch add .xlate_tdm_slot_mask support for ESAI, and this will
generate the TDM slot TX and RX masks.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch add fsl_asoc_xlate_tdm_slot_mask() support for utils.
For the some spcified DAI driver, this will be used to generate the
TDM slot TX/RX mask. And the TX/RX mask will use a 0 bit for an active
slot as default, and the default active bits are at the LSB of
the masks.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The 'of_' is not appropriate here for there hasn't any DT parsing.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Before we had card level support for DAPM and controls machine drivers would
register their controls and DAPM elements with the CODEC. This required us to
temporarily unset the name_prefix of a CODEC during the rtd init callback to
avoid the machine level controls getting the CODEC's prefix. Now that all
machine drivers properly register their machine level controls and DAPM elements
with the card rather than with the CODEC we can drop the hack that sets the
CODEC's name_prefix to NULL while calling the DAI link or AUX dev init callback.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

src might not exist.
kernel will be hung-up without this patch in such case.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The changes in "ASoC: pcm: free path list before exiting from error
conditions" actually introduced both double frees (in case where the
path list was allocated but empty) and frees of unallocated memory (in
cases where the error being handled was -ENOMEM.  Drop the commit for
now.

Fixes: e4ad1acc (ASoC: pcm: free path list before exiting from error conditions)
Reported-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NMark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

Fixes: 115f3f8 ("ASoC: mfld_machine: Convert to table based DAPM and control setup")
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

Support for loading the Renesas R-Car sound driver via DeviceTree.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use table based setup to register the controls and DAPM widgets and routes.
This on one hand makes the code a bit cleaner and on the other hand
the board level DAPM elements get registered in the card's DAPM context rather
than in the CODEC's DAPM context.

The mfld_machine driver is a bit special in that it directly writes to one of
the CODEC registers from one of the control handlers. Previous to this patch it
was able to get a pointer to the CODEC from the control, since the control was
registered with the CODEC. This won't be possible anymore once the control is
registered with the card. Since there are already global variables in the driver
accessed in the same function the patch adds a global variable that holds a
pointer to the CODEC and uses that.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch adds support for the Cirrus Logic CS42448/CS42888 Audio CODEC that
has six/four 24-bit AD and eight 24-bit DA converters.

[ CS42448/CS42888 supports both I2C and SPI control ports. As initial patch,
  this patch only adds the support for I2C. ]
Signed-off-by: NNicolin Chen <Guangyu.Chen@freescale.com>
Acked-by: NBrian Austin <brian.austin@cirrus.com>
Acked-by: NPaul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

When using an rbtree cache, there can be allocations the first time a
register is accessed.  This can cause an attempt to schedule while
atomic in the case that the regmap is using a spinlock.  This could be
fixed by either initializing all the registers or using a flat cache.
The register maps for tegra30_ahub and tegra30_i2s are dense and don't
save much from using a tree so convert them to flat.

Tegra30 changes tested on Norrin, Tegra20 changes compile.
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Tested-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The shift values for the ADC,PCM, and Analog kcontrols were wrong causing wrong values for the SOC_DOUBLE_R_SX_TLV macros
Fixed the TLV for aout_tlv to show -102dB correctly

Fixes: 1d99f243 (ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLV)
Reported-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NBrian Austin <brian.austin@cirrus.com>
Signed-off-by: NMark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

Since all regmap CODECs should be (and are) using the more advance regmap
cache infrastructure remove the code which supports that and just proxy
I/O straight through to regmap.
Signed-off-by: NMark Brown <broonie@linaro.org>