- 29 9月, 2010 13 次提交
-
-
由 Steve Wise 提交于
- Remove dsgl support - doesn't work in T4. - Wrap the immediate PBL as needed when building it in the wr. - Adjust max pbl depth allowed based on ulptx alignment requirements. - Bump the slots per SQ to 5 to allow up to 128MB fast registers. - Advertise fastreg support by default. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
This helps with large IO throughput. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
Move the connection setup/teardown paths to the workq thread removing spin lock/irq disable requirements for these paths. This allows calls down to the LLD for EP and QP state transition actions to be atomic with respect to processing CPL messages coming up from the HW. Namely, calls to rdma_init() and rdma_fini() can now be called with the mutex held avoiding many race conditions with the abort path. The QP spinlock is still used but only to manipulate the qp state. This allows the fastpaths, poll, post_send, and pos_recv, to run in the irq context. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
T4 support on-chip SQs to reduce latency. This patch adds support for this in iw_cxgb4: - Manage ocqp memory like other adapter mem resources. - Allocate user mode SQs from ocqp mem if available. - Map ocqp mem to user process using write combining. - Map PCIE_MA_SYNC reg to user process. Bump uverbs ABI. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
Add "stags" debugfs file. This is useful for examining the TPTE and PBL entries in adapter memory. It allows scripts to dump just the active entries. Also clean up the "qps" file handlers and shared common code. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
This helps debug cases where HW resources are depleted. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
T4 FW sends up CPL_RDMA_TERMINATE to indicate a peer TERM. This triggers the QP moving to TERMINATE state. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
T4 incorrectly inserts TERM CQEs into the CQ. Silently ignore them. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
The cxgb4_*_send() functions return NET_XMIT_ values, which are positive integers or negative errno values. So don't treat positive return values as an error. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
The HW design requires zeroing any pad in SGLs. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
In c4iw_modify_qp() error path, only use qhp->ep if ep is not already set. Otherwise qhp->ep can be NULL and we crash. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 28 9月, 2010 22 次提交
-
-
由 Roland Dreier 提交于
Fix: drivers/infiniband/hw/cxgb4/qp.c: In function ‘create_qp’: drivers/infiniband/hw/cxgb4/qp.c:147: warning: cast from pointer to integer of different size drivers/infiniband/hw/cxgb4/qp.c: In function ‘rdma_fini’: drivers/infiniband/hw/cxgb4/qp.c:988: warning: cast from pointer to integer of different size drivers/infiniband/hw/cxgb4/qp.c: In function ‘rdma_init’: drivers/infiniband/hw/cxgb4/qp.c:1063: warning: cast from pointer to integer of different size drivers/infiniband/hw/cxgb4/mem.c: In function ‘write_adapter_mem’: drivers/infiniband/hw/cxgb4/mem.c:74: warning: cast from pointer to integer of different size drivers/infiniband/hw/cxgb4/cq.c: In function ‘destroy_cq’: drivers/infiniband/hw/cxgb4/cq.c:58: warning: cast from pointer to integer of different size drivers/infiniband/hw/cxgb4/cq.c: In function ‘create_cq’: drivers/infiniband/hw/cxgb4/cq.c:135: warning: cast from pointer to integer of different size drivers/infiniband/hw/cxgb4/cm.c: In function ‘fw6_msg’: drivers/infiniband/hw/cxgb4/cm.c:2326: warning: cast to pointer from integer of different size by casting pointers to unsigned long instead of u64. Reported-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Dan Rosenberg 提交于
The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a pktcdvd_device from the global pkt_devs array. The index into this array is provided directly by the user and is a signed integer, so the comparison to ensure that it falls within the bounds of this array will fail when provided with a negative index. This can be used to read arbitrary kernel memory or cause a crash due to an invalid pointer dereference. This can be exploited by users with permission to open /dev/pktcdvd/control (on many distributions, this is readable by group "cdrom"). Signed-off-by: NDan Rosenberg <dan.j.rosenberg@gmail.com> [ Rather than add a cast, just make the function take the right type -Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
The configuration choice for the port on which the GDB stub listens has a default of GDBSTUB_TTYSM0, but this should be GDBSTUB_ON_TTYSM0 to match the option. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cxgb3: Turn off RX coalescing for iWARP connections
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits) ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE ARM: 6408/1: omap: Map only available sram memory ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries ARM: pxa: remove pr_<level> uses of KERN_<level> ARM: pxa168fb: clear enable bit when not active ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured ARM: pxa168: fix corrected reset vector ARM: pxa: Use PIO for PI2C communication on Palm27x ARM: pxa: Fix Vpac270 gpio_power for MMC ARM: 6401/1: plug a race in the alignment trap handler ARM: 6406/1: at91sam9g45: fix i2c bus speed leds: leds-ns2: fix locking ARM: dove: fix __io() definition to use bus based offset dmaengine: fix interrupt clearing for mv_xor ARM: kirkwood: Unbreak PCIe I/O port ARM: Fix build error when using KCONFIG_CONFIG ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing ARM: 6400/1: at91: fix arch_gettimeoffset fallout ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: net/9p: fix memory handling/allocation in rdma_request()
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix driver module removal
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: TOMOYO: Don't abuse sys_getpid(), sys_getppid()
-
git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel由 Linus Torvalds 提交于
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: drm/i915/sdvo: Handle unsupported GET_SUPPORTED_ENHANCEMENTS gracefully drm/i915/sdvo: Cleanup connector on error path drm/i915: Fix 945GM regression in e259befd
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove mmc: sdhci-s3c: fix incorrect spinlock usage after merge mmc: MAINTAINERS: add myself as MMC maintainer
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6由 Linus Torvalds 提交于
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: pd6729: Fix error path pcmcia: preserve configuration information if request_io fails partly
-
git://git.infradead.org/iommu-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/iommu-2.6: intel-iommu: Use symbolic values instead of magic numbers in Lenovo w/a intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT space
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/amd-iommu: Fix rounding-bug in __unmap_single x86/amd-iommu: Work around S3 BIOS bug x86/amd-iommu: Set iommu configuration flags in enable-loop x86, setup: Fix earlyprintk=serial,0x3f8,115200 x86, setup: Fix earlyprintk=serial,ttyS0,115200
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf, x86: Catch spurious interrupts after disabling counters tracing/x86: Don't use mcount in kvmclock.c tracing/x86: Don't use mcount in pvclock.c
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
It really has no business being there; short of a serious kernel bug we should already have USER_DS at that point. It shouldn't have been done on x86 either... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
set ->orig_d0 to -1, same as what sigreturn does Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
force_sigsegv() is there for purpose... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
get rid of a useless wrapper, while we are at it Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Steve Wise 提交于
The HW by default has RX coalescing on. For iWARP connections, this causes a 100ms delay in connection establishement due to the ingress MPA Start message being stalled in HW. So explicitly turn RX coalescing off when setting up iWARP connections. This was causing very bad performance for NP64 gather operations using Open MPI, due to the way it sets up connections on larger jobs. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Cc: <stable@kernel.org> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 27 9月, 2010 5 次提交
-
-
由 Will Deacon 提交于
The PL310 on the ct-ca9x4 tile for the Versatile Express does not need to add additional latency when accessing its cache RAMs. Unfortunately, the boot monitor sets this up for an 8-cycle delay on reads and writes, resulting in greatly reduced memory performance when the L2 cache is enabled. This patch sets the L2 RAM latencies to the correct value of 1 cycle on the ct-ca9x4 tile before enabling the L2 cache. Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Davidlohr Bueso 提交于
Return -ENOMEM when erroring on kmalloc and fix memory leaks when returning on error. Signed-off-by: NDavidlohr Bueso <dave@gnu.org> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Borislav Petkov 提交于
f4347553 removed the edac polling mechanism in favor of using a notifier chain for conveying MCE information to edac. However, the module removal path didn't test whether the driver had setup the polling function workqueue at all and the rmmod process was hanging in the kernel at try_to_del_timer_sync() in the cancel_delayed_work() path, trying to cancel an uninitialized work struct. Fix that by adding a balancing check to the workqueue removal path. Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Ben Hutchings 提交于
System call entry functions sys_*() are never to be called from general kernel code. The fact that they aren't declared in header files should have been a clue. These functions also don't exist on Alpha since it has sys_getxpid() instead. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Marek Szyprowski 提交于
If not all clocks have been defined in platform data, the driver will cause a null pointer dereference when it is removed. This patch fixes this issue. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-