replace function calls when possible call in both irq/non-irq contexts
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Get rid of this compile warning:

In file included from arch/s390/kernel/compat_linux.c:37:0:
include/linux/filter.h:139:23: warning: 'struct sk_buff' declared inside parameter list
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This also shrinks the object size a little.

   text	   data	    bss	    dec	    hex	filename
  28834	    186	      8	  29028	   7164	net/core/pktgen.o
  28816	    186	      8	  29010	   7152	net/core/pktgen.o.AFTER
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: "David Miller" <davem@davemloft.net>,
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The purpose of the check on data_len is to check linearity, so use the inline
helper for this. No overhead and more explicit.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a stack backtrace to the ip_rt_bug path for debugging
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dev_deactivate_many() issues one synchronize_rcu() call after qdiscs set
to noop_qdisc.

This call is here to make sure they are no outstanding qdisc-less
dev_queue_xmit calls before returning to caller.

But in dismantle phase, we dont have to wait, because we wont activate
again the device, and we are going to wait one rcu grace period later in
rollback_registered_many().

After this patch, device dismantle uses one synchronize_net() and one
rcu_barrier() call only, so we have a ~30% speedup and a smaller RTNL
latency.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Patrick McHardy <kaber@trash.net>,
CC: Ben Greear <greearb@candelatech.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the old days, we used to access dev->master in __netif_receive_skb()
in a rcu_read_lock section.

So one synchronize_net() call was needed in netdev_set_master() to make
sure another cpu could not use old master while/after we release it.

We now use netdev_rx_handler infrastructure and added one
synchronize_net() call in bond_release()/bond_release_all()

Remove the obsolete synchronize_net() from netdev_set_master() and add
one in bridge del_nbp() after its netdev_rx_handler_unregister() call.

This makes enslave -d a bit faster.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Jiri Pirko <jpirko@redhat.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These two events are not expected to be caught by userspace.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

s/NETDEV_BONDING_DESLAVE/NETDEV_RELEASE/ as Andy suggested.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Neil Horman <nhorman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the previous patch I added NETDEV_JOIN, now
we can notify netconsole when adding a device to a bridge too.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Cc: Neil Horman <nhorman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

V3: rename NETDEV_ENSLAVE to NETDEV_JOIN

Currently we do nothing when we enslave a net device which is running netconsole.
Neil pointed out that we may get weird results in such case, so let's disable
netpoll on the device being enslaved. I think it is too harsh to prevent
the device being ensalved if it is running netconsole.

By the way, this patch also removes the NETDEV_GOING_DOWN from netconsole
netdev notifier, because netpoll will check if the device is running or not
and we don't handle NETDEV_PRE_UP neither.

This patch is based on net-next-2.6.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Cc: Neil Horman <nhorman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unicast frames between macvlan interfaces in bridge mode are not otherwise
sent to network taps on the lowerdev (as all other macvlan frames are), so
forward the frames to the receive queue of the lowerdev first.
Signed-off-by: NDavid Ward <david.ward@ll.mit.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No longer needed.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After discovering that wide use of prefetch on modern CPUs
could be a net loss instead of a win, net drivers which were
relying on the implicit inclusion of prefetch.h via the list
headers showed up in the resulting cleanup fallout.  Give
them an explicit include via the following $0.02 script.

 =========================================
 #!/bin/bash
 MANUAL=""
 for i in `git grep -l 'prefetch(.*)' .` ; do
 	grep -q '<linux/prefetch.h>' $i
 	if [ $? = 0 ] ; then
 		continue
 	fi

 	(	echo '?^#include <linux/?a'
 		echo '#include <linux/prefetch.h>'
 		echo .
 		echo w
 		echo q
 	) | ed -s $i > /dev/null 2>&1
 	if [ $? != 0 ]; then
 		echo $i needs manual fixup
 		MANUAL="$i $MANUAL"
 	fi
 done
 echo ------------------- 8\<----------------------
 echo vi $MANUAL
 =========================================
Signed-off-by: NPaul <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Casting to u32 warns anyways.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Noticed by Linus.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case of checksum error, the framing layer returns -EILSEQ, but
does not free the packet. Plug this hole by freeing the packet if
-EILSEQ is returned.
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial patch updating documentation in header files only.
Error handling of CAIF transmit errors was changed by commit:
      caif: Don't resend if dev_queue_xmit fails.
This patch updates the documentation accordingly.
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix spinlock bugs when running out of link-ids in loopback tests and
avoid allocating link-id when error is set in link-setup-response.
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CAIF Socket layer - caif_socket.c:
- Plug mem-leak at reconnect.
- Always call disconnect to cleanup CAIF stack.
- Disconnect will always report success.

CAIF configuration layer - cfcnfg.c
- Disconnect must dismantle the caif stack correctly
- Protect against faulty removals (check on id zero)

CAIF mux layer - cfmuxl.c
- When inserting new service layer in the MUX remove
  any old entries with the same ID.
- When removing CAIF Link layer, remove the associated
  service layers before notifying service layers.
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add check on layer->dn != NULL before calling functions in
layer below.
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'viafb-next' of git://github.com/schandinat/linux-2.6: (24 commits)
  viafb: Automatic OLPC XO-1.5 configuration
  viafb: remove unused CEA mode
  viafb: try to map less memory in case of failure
  viafb: use write combining for video ram
  viafb: add X server compatibility mode
  viafb: reduce OLPC refresh a bit
  viafb: fix OLPC XO 1.5 device connection
  viafb: fix OLPC DCON refresh rate
  viafb: delete clock and PLL initialization
  viafb: replace custom return values
  viafb: some small cleanup for global variables
  viafb: gather common good, old VGA initialization in one place
  viafb: add engine clock support
  viafb: add VIA slapping capability
  viafb: split clock and PLL code to an extra file
  viafb: add primary/secondary clock on/off switches
  viafb: add clock source selection and PLL power management support
  viafb: prepare for PLL separation
  viafb: call viafb_get_clk_value only in viafb_set_vclock
  viafb: remove unused max_hres/vres
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
  [PARISC] wire up syncfs syscall
  [PARISC] wire up the fhandle syscalls
  [PARISC] wire up clock_adjtime syscall
  [PARISC] wire up fanotify syscalls
  [PARISC] prevent speculative re-read on cache flush
  [PARISC] only make executable areas executable
  [PARISC] fix pacache .size with new binutils

Fixes build errors on s390 and probably other archs as well:

  In file included from net/ipv4/ip_forward.c:32:0:
  include/net/udp.h: In function 'udp_csum_outgoing':
  include/net/udp.h:141:2: error: implicit declaration of function 'prefetch'
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes this build error on s390 and probably other archs as well:

  fs/inode.c: In function 'new_inode':
  fs/inode.c:894:2: error: implicit declaration of function 'spin_lock_prefetch'
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
[ Happens on architectures that don't define their own prefetch
  functions in <asm/processor.h>, and instead rely on the default
  ones in <linux/prefetch.h>   - Linus]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: parallelize login, reconnect, logout
  firewire: sbp2: octlet AT payloads can be stack-allocated
  firewire: sbp2: omit Scsi_Host lock from queuecommand
  firewire: core: use non-reentrant workqueue with rescuer
  firewire: optimize iso queueing by setting wake only after the last packet
  firewire: octlet AT payloads can be stack-allocated
  firewire: ohci: optimize find_branch_descriptor()
  firewire: ohci: avoid separate DMA mapping for small AT payloads
  firewire: ohci: do not start DMA contexts before link is enabled

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  sctp: Fix build failure.
  garp: use kfree_rcu()
  ipv6: copy prefsrc setting when copying route entry

This solves a serious VFS-level bug in nested_symlink (which was
rewritten from do_follow_link), and follows the order of depth tests
that existed before.

The bug triggers a BUG_ON in fs/namei.c:1381, when running racer with
symlink and rename ops.
Signed-off-by: NErez Zadok <ezk@cs.sunysb.edu>
Acked-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit c182f90b ("SCTP: fix race
between sctp_bind_addr_free() and sctp_bind_addr_conflict()") and
commit 1231f0ba ("net,rcu: convert
call_rcu(sctp_local_addr_free) to kfree_rcu()"), happening in
different trees, introduced a build failure.

Simply make the SCTP race fix use kfree_rcu() too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use kfree_rcu() instead of call_rcu(), remove garp_cleanup_module()
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit c3968a85
('ipv6: RTA_PREFSRC support for ipv6 route source address selection')
added support for ipv6 prefsrc as an alternative to ipv6 addrlabels,
but it did not work because the prefsrc entry was not copied.

Cc: Daniel Walter <sahne@0x90.at>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (45 commits)
  crypto: caam - add support for sha512 variants of existing AEAD algorithms
  crypto: caam - remove unused authkeylen from caam_ctx
  crypto: caam - fix decryption shared vs. non-shared key setting
  crypto: caam - platform_bus_type migration
  crypto: aesni-intel - fix aesni build on i386
  crypto: aesni-intel - Merge with fpu.ko
  crypto: mv_cesa - make count_sgs() null-pointer proof
  crypto: mv_cesa - copy remaining bytes to SRAM only when needed
  crypto: mv_cesa - move digest state initialisation to a better place
  crypto: mv_cesa - fill inner/outer IV fields only in HMAC case
  crypto: mv_cesa - refactor copy_src_to_buf()
  crypto: mv_cesa - no need to save digest state after the last chunk
  crypto: mv_cesa - print a warning when registration of AES algos fail
  crypto: mv_cesa - drop this call to mv_hash_final from mv_hash_finup
  crypto: mv_cesa - the descriptor pointer register needs to be set just once
  crypto: mv_cesa - use ablkcipher_request_cast instead of the manual container_of
  crypto: caam - fix printk recursion for long error texts
  crypto: caam - remove unused keylen from session context
  hwrng: amd - enable AMD hw rnd driver for Maple PPC boards
  hwrng: amd - manage resource allocation
  ...

As Ben Hutchings discovered [1], the patch for CVE-2011-1017 (buffer
overflow in ldm_frag_add) is not sufficient.  The original patch in
commit c340b1d6 ("fs/partitions/ldm.c: fix oops caused by corrupted
partition table") does not consider that, for subsequent fragments,
previously allocated memory is used.

[1] http://lkml.org/lkml/2011/5/6/407Reported-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NTimo Warns <warns@pre-sense.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 778dd893 ("tmpfs: fix race between umount and swapoff")
forgot the new rules for strict atomic kmap nesting, causing

  WARNING: at arch/x86/mm/highmem_32.c:81

from __kunmap_atomic(), then

  BUG: unable to handle kernel paging request at fffb9000

from shmem_swp_set() when shmem_unuse_inode() is handling swapoff with
highmem in use.  My disgrace again.

See
  https://bugzilla.kernel.org/show_bug.cgi?id=35352Reported-by: NWitold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 69e3cea8 ("powerpc/smp: Make start_secondary_resume
available to all CPU variants") introduced start_secondary_resume to
misc_32.S, however it uses a 64-bit instruction which is not valid on
32-bit platforms.  Use 'stw' instead.
Reported-by: NRichard Cochran <richardcochran@gmail.com>
Tested-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: Power off empty ports
  libata-pmp: add support for Thermaltake BlackX Duet esata drive dock
  ATA: Don't powerdown Compaq Triflex IDE device on suspend
  libata: Use Maximum Write Same Length to report discard size limit
  drivers/ata/acard-ahci.c: fix enum warning
  pata_at91: SMC settings calculation bugfixes, support for t6z and IORDY
  libata-sff: prevent irq descriptions for dummy ports
  pata_cm64x: fix boot crash on parisc