[ Upstream commit 4a4d2d372fb9b9229327e2ed01d5d9572eddf4de ]

Commit 04f05230c5c13 ("bnx2x: Remove configured vlans as
part of unload sequence."), introduced a regression in driver
that as a part of VF's reload flow, VLANs created on the VF
doesn't get re-configured in hardware as vlan metadata/info
was not getting cleared for the VFs which causes vlan PING to stop.

This patch clears the vlan metadata/info so that VLANs gets
re-configured back in the hardware in VF's reload flow and
PING/traffic continues for VLANs created over the VFs.

Fixes: 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.")
Signed-off-by: NManish Chopra <manishc@marvell.com>
Signed-off-by: NSudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: NShahed Shaikh <shshaikh@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 24d2c521749d8547765b555b7a85cca179bb2275 upstream.

The function is only called from another __init function, so
it should be moved to .init too.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 49e6979e7e92cf496105b5636f1df0ac17c159c0 upstream.

trackpoint_detect() should be static inline while
CONFIG_MOUSE_PS2_TRACKPOINT is not set, otherwise, we build fails:

drivers/input/mouse/alps.o: In function `trackpoint_detect':
alps.c:(.text+0x8e00): multiple definition of `trackpoint_detect'
drivers/input/mouse/psmouse-base.o:psmouse-base.c:(.text+0x1b50): first defined here
Reported-by: NHulk Robot <hulkci@huawei.com>
Fixes: 55e3d922 ("Input: psmouse - allow disabing certain protocol extensions")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hui Wang <hui.wang@canonical.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bcb44433bba5eaff293888ef22ffa07f1f0347d6 upstream.

Storage devices which report supporting discard commands like
WRITE_SAME_16 with unmap, but reject discard commands sent to the
storage device.  This is a clear storage firmware bug but it doesn't
change the fact that should a program cause discards to be sent to a
multipath device layered on this buggy storage, all paths can end up
failed at the same time from the discards, causing possible I/O loss.

The first discard to a path will fail with Illegal Request, Invalid
field in cdb, e.g.:
 kernel: sd 8:0:8:19: [sdfn] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
 kernel: sd 8:0:8:19: [sdfn] tag#0 Sense Key : Illegal Request [current]
 kernel: sd 8:0:8:19: [sdfn] tag#0 Add. Sense: Invalid field in cdb
 kernel: sd 8:0:8:19: [sdfn] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 a0 08 00 00 00 80 00 00 00
 kernel: blk_update_request: critical target error, dev sdfn, sector 10487808

The SCSI layer converts this to the BLK_STS_TARGET error number, the sd
device disables its support for discard on this path, and because of the
BLK_STS_TARGET error multipath fails the discard without failing any
path or retrying down a different path.  But subsequent discards can
cause path failures.  Any discards sent to the path which already failed
a discard ends up failing with EIO from blk_cloned_rq_check_limits with
an "over max size limit" error since the discard limit was set to 0 by
the sd driver for the path.  As the error is EIO, this now fails the
path and multipath tries to send the discard down the next path.  This
cycle continues as discards are sent until all paths fail.

Fix this by training DM core to disable DISCARD if the underlying
storage already did so.

Also, fix branching in dm_done() and clone_endio() to reflect the
mutually exclussive nature of the IO operations in question.

Cc: stable@vger.kernel.org
Reported-by: NDavid Jeffery <djeffery@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
[Salvatore Bonaccorso: backported to 4.19: Adjust for context changes in
drivers/md/dm-core.h]
Signed-off-by: NSalvatore Bonaccorso <carnil@debian.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6caf0be40a707689e8ff8824fdb96ef77685b1ba upstream.

On Motorola Mapphone devices such as Droid 4 there are five USB ports
that do not use the same layout as Gobi 1K/2K/etc devices listed in
qcserial.c. So we should use qcaux.c or option.c as noted by
Dan Williams <dan.j.williams@intel.com>.

As the Motorola USB serial ports have an interrupt endpoint as shown
with lsusb -v, we should use option.c instead of qcaux.c as pointed out
by Johan Hovold <johan@kernel.org>.

The ff/ff/ff interfaces seem to always be UARTs on Motorola devices.
For the other interfaces, class 0x0a (CDC Data) should not in general
be added as they are typically part of a multi-interface function as
noted earlier by Bjørn Mork <bjorn@mork.no>.

However, looking at the Motorola mapphone kernel code, the mdm6600 0x0a
class is only used for flashing the modem firmware, and there are no
other interfaces. So I've added that too with more details below as it
works just fine.

The ttyUSB ports on Droid 4 are:

ttyUSB0 DIAG, CQDM-capable
ttyUSB1 MUX or NMEA, no response
ttyUSB2 MUX or NMEA, no response
ttyUSB3 TCMD
ttyUSB4 AT-capable

The ttyUSB0 is detected as QCDM capable by ModemManager. I think
it's only used for debugging with ModemManager --debug for sending
custom AT commands though. ModemManager already can manage data
connection using the USB QMI ports that are already handled by the
qmi_wwan.c driver.

To enable the MUX or NMEA ports, it seems that something needs to be
done additionally to enable them, maybe via the DIAG or TCMD port.
It might be just a NVRAM setting somewhere, but I have no idea what
NVRAM settings may need changing for that.

The TCMD port seems to be a Motorola custom protocol for testing
the modem and to configure it's NVRAM and seems to work just fine
based on a quick test with a minimal tcmdrw tool I wrote.

The voice modem AT-capable port seems to provide only partial
support, and no PM support compared to the TS 27.010 based UART
wired directly to the modem.

The UARTs added with this change are the same product IDs as the
Motorola Mapphone Android Linux kernel mdm6600_id_table. I don't
have any mdm9600 based devices, so I have only tested these on
mdm6600 based droid 4.

Then for the class 0x0a (CDC Data) mode, the Motorola Mapphone Android
Linux kernel driver moto_flashqsc.c just seems to change the
port->bulk_out_size to 8K from the default. And is only used for
flashing the modem firmware it seems.

I've verified that flashing the modem with signed firmware works just
fine with the option driver after manually toggling the GPIO pins, so
I've added droid 4 modem flashing mode to the option driver. I've not
added the other devices listed in moto_flashqsc.c in case they really
need different port->bulk_out_size. Those can be added as they get
tested to work for flashing the modem.

After this patch the output of /sys/kernel/debug/usb/devices has
the following for normal 22b8:2a70 mode including the related qmi_wwan
interfaces:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22b8 ProdID=2a70 Rev= 0.00
S:  Manufacturer=Motorola, Incorporated
S:  Product=Flash MZ600
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=88(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E:  Ad=8b(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=8c(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E:  Ad=8d(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=09(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

In 22b8:900e "qc_dload" mode the device shows up as:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22b8 ProdID=900e Rev= 0.00
S:  Manufacturer=Motorola, Incorporated
S:  Product=Flash MZ600
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

And in 22b8:4281 "ram_downloader" mode the device shows up as:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22b8 ProdID=4281 Rev= 0.00
S:  Manufacturer=Motorola, Incorporated
S:  Product=Flash MZ600
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=fc Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

Cc: Bjørn Mork <bjorn@mork.no>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Lars Melin <larsm17@gmail.com>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Tested-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e5d8badf37e6b547842f2fcde10361b29e08bd36 upstream.

Add a VID:PID for the BroadMobi BM818 M.2 card

T:  Bus=01 Lev=03 Prnt=40 Port=03 Cnt=01 Dev#= 44 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2020 ProdID=2060 Rev=00.00
S:  Manufacturer=Qualcomm, Incorporated
S:  Product=Qualcomm CDMA Technologies MSM
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
Signed-off-by: NBob Ham <bob.ham@puri.sm>
Signed-off-by: NAngus Ainslie (Purism) <angus@akkea.ca>
Cc: stable <stable@vger.kernel.org>
[ johan: use USB_DEVICE_INTERFACE_CLASS() ]
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7e7ae38bf928c5cfa6dd6e9a2cf8b42c84a27c92 upstream.

This patch adds support for MF871A USB modem (aka Speed USB STICK U03)
to option driver. This modem is manufactured by ZTE corporation, and
sold by KDDI.

Interface layout:
0: AT
1: MODEM

usb-devices output:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  9 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=1481 Rev=52.87
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE Technologies MSM
S:  SerialNumber=1234567890ABCDEF
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
Co-developed-by: NHiroyuki Yamamoto <hyamamo@allied-telesis.co.jp>
Signed-off-by: NHiroyuki Yamamoto <hyamamo@allied-telesis.co.jp>
Signed-off-by: NYoshiaki Okamoto <yokamoto@allied-telesis.co.jp>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 552573e42aab5f75aff9bab855a9677979d9a7d5 upstream.

Add device id for D-Link DWM-222 A2.

MI_00 D-Link HS-USB Diagnostics
MI_01 D-Link HS-USB Modem
MI_02 D-Link HS-USB AT Port
MI_03 D-Link HS-USB NMEA
MI_04 D-Link HS-USB WWAN Adapter (qmi_wwan)
MI_05 USB Mass Storage Device

Cc: stable@vger.kernel.org
Signed-off-by: NRogan Dawes <rogan@dawes.za.net>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 54364278fb3cabdea51d6398b07c87415065b3fc upstream.

A few checks checked for the size of the pointer to a structure
instead of the structure itself. Copy & paste issue presumably.

Fixes: e4c6fb77 ("usbnet: move the CDC parser into USB core")
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+45a53506b65321c1fe91@syzkaller.appspotmail.com
Signed-off-by: NOliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20190813093541.18889-1-oneukum@suse.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c52873e5a1ef72f845526d9f6a50704433f9c625 upstream.

destroy() will decrement the refcount on the interface, so that
it needs to be taken so early that it never undercounts.

Fixes: 7fb57a01 ("USB: cdc-acm: Fix potential deadlock (lockdep warning)")
Cc: stable <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+1b2449b7b5dc240d107a@syzkaller.appspotmail.com
Signed-off-by: NOliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20190808142119.7998-1-oneukum@suse.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5dac665cf403967bb79a7aeb8c182a621fe617ff upstream.

Since the role_store() uses strncmp(), it's possible to refer
out-of-memory if the sysfs data size is smaller than strlen("host").
This patch fixes it by using sysfs_streq() instead of strncmp().

Fixes: cc995c9e ("usb: gadget: udc: renesas_usb3: add support for usb role swap")
Cc: <stable@vger.kernel.org> # v4.12+
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 303911cfc5b95d33687d9046133ff184cf5043ff upstream.

The syzbot fuzzer has found two (!) races in the USB character device
registration and deregistration routines.  This patch fixes the races.

The first race results from the fact that usb_deregister_dev() sets
usb_minors[intf->minor] to NULL before calling device_destroy() on the
class device.  This leaves a window during which another thread can
allocate the same minor number but will encounter a duplicate name
error when it tries to register its own class device.  A typical error
message in the system log would look like:

    sysfs: cannot create duplicate filename '/class/usbmisc/ldusb0'

The patch fixes this race by destroying the class device first.

The second race is in usb_register_dev().  When that routine runs, it
first allocates a minor number, then drops minor_rwsem, and then
creates the class device.  If the device creation fails, the minor
number is deallocated and the whole routine returns an error.  But
during the time while minor_rwsem was dropped, there is a window in
which the minor number is allocated and so another thread can
successfully open the device file.  Typically this results in
use-after-free errors or invalid accesses when the other thread closes
its open file reference, because the kernel then tries to release
resources that were already deallocated when usb_register_dev()
failed.  The patch fixes this race by keeping minor_rwsem locked
throughout the entire routine.

Reported-and-tested-by: syzbot+30cf45ebfe0b0c4847a1@syzkaller.appspotmail.com
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1908121607590.1659-100000@iolanthe.rowland.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b9ddd5091160793ee9fac10da765cf3f53d2aaf0 upstream.

The max9611 driver reads the die temperature at probe time to validate
the communication channel. Use the actual read value to perform the test
instead of the read function return value, which was mistakenly used so
far.

The temperature reading test was only successful because the 0 return
value is in the range of supported temperatures.

Fixes: 69780a3b ("iio: adc: Add Maxim max9611 ADC driver")
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8e2a589a3fc36ce858d42e767c3bcd8fc62a512b upstream.

`dt3k_ns_to_timer()` determines the prescaler and divisor to use to
produce a desired timing period.  It is influenced by a rounding mode
and can round the divisor up, down, or to the nearest value.  However,
the code for rounding up currently does the same as rounding down!  Fix
ir by using the `DIV_ROUND_UP()` macro to calculate the divisor when
rounding up.

Also, change the types of the `divider`, `base` and `prescale` variables
from `int` to `unsigned int` to avoid mixing signed and unsigned types
in the calculations.

Also fix a typo in a nearby comment: "improvment" => "improvement".
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190812120814.21188-1-abbotti@mev.co.ukSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b4d98bc3fc93ec3a58459948a2c0e0c9b501cd88 upstream.

In `dt3k_ns_to_timer()` the following lines near the end of the function
result in a signed integer overflow:

	prescale = 15;
	base = timer_base * (1 << prescale);
	divider = 65535;
	*nanosec = divider * base;

(`divider`, `base` and `prescale` are type `int`, `timer_base` and
`*nanosec` are type `unsigned int`.  The value of `timer_base` will be
either 50 or 100.)

The main reason for the overflow is that the calculation for `base` is
completely wrong.  It should be:

	base = timer_base * (prescale + 1);

which matches an earlier instance of this calculation in the same
function.
Reported-by: NDavid Binderman <dcb314@hotmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20190812111517.26803-1-abbotti@mev.co.ukSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1bbbab097a05276e312dd2462791d32b21ceb1ee ]

Currently the retry counter is not being decremented, leading to a
potential infinite spin if the scalar_reads don't change state.

Addresses-Coverity: ("Infinite loop")
Fixes: 280e54c9 ("drm/exynos: scaler: Reset hardware before starting the operation")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9ca7ad6c7706edeae331c1632d0c63897418ebad ]

add_gpu_components() adds found GPU nodes from the DT to the match list,
regardless of the status of the nodes.  This is a problem, because if the
nodes are disabled, they should not be on the match list because they will
not be matched.  This prevents display from initing if a GPU node is
defined, but it's status is disabled.

Fix this by checking the node's status before adding it to the match list.

Fixes: dc3ea265 (drm/msm: Drop the gpu binding)
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626180015.45242-1-jeffrey.l.hugo@gmail.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 770b7d96cfff6a8bf6c9f261ba6f135dc9edf484 ]

We encountered a use-after-free bug when unloading the driver:

[ 3562.116059] BUG: KASAN: use-after-free in ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.117233] Read of size 4 at addr ffff8882ca5aa868 by task kworker/u13:2/23862
[ 3562.118385]
[ 3562.119519] CPU: 2 PID: 23862 Comm: kworker/u13:2 Tainted: G           OE     5.1.0-for-upstream-dbg-2019-05-19_16-44-30-13 #1
[ 3562.121806] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 3562.123075] Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
[ 3562.124383] Call Trace:
[ 3562.125640]  dump_stack+0x9a/0xeb
[ 3562.126911]  print_address_description+0xe3/0x2e0
[ 3562.128223]  ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.129545]  __kasan_report+0x15c/0x1df
[ 3562.130866]  ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.132174]  kasan_report+0xe/0x20
[ 3562.133514]  ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.134835]  ? find_mad_agent+0xa00/0xa00 [ib_core]
[ 3562.136158]  ? qlist_free_all+0x51/0xb0
[ 3562.137498]  ? mlx4_ib_sqp_comp_worker+0x1970/0x1970 [mlx4_ib]
[ 3562.138833]  ? quarantine_reduce+0x1fa/0x270
[ 3562.140171]  ? kasan_unpoison_shadow+0x30/0x40
[ 3562.141522]  ib_mad_recv_done+0xdf6/0x3000 [ib_core]
[ 3562.142880]  ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 3562.144277]  ? ib_mad_send_done+0x1810/0x1810 [ib_core]
[ 3562.145649]  ? mlx4_ib_destroy_cq+0x2a0/0x2a0 [mlx4_ib]
[ 3562.147008]  ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 3562.148380]  ? debug_object_deactivate+0x2b9/0x4a0
[ 3562.149814]  __ib_process_cq+0xe2/0x1d0 [ib_core]
[ 3562.151195]  ib_cq_poll_work+0x45/0xf0 [ib_core]
[ 3562.152577]  process_one_work+0x90c/0x1860
[ 3562.153959]  ? pwq_dec_nr_in_flight+0x320/0x320
[ 3562.155320]  worker_thread+0x87/0xbb0
[ 3562.156687]  ? __kthread_parkme+0xb6/0x180
[ 3562.158058]  ? process_one_work+0x1860/0x1860
[ 3562.159429]  kthread+0x320/0x3e0
[ 3562.161391]  ? kthread_park+0x120/0x120
[ 3562.162744]  ret_from_fork+0x24/0x30
...
[ 3562.187615] Freed by task 31682:
[ 3562.188602]  save_stack+0x19/0x80
[ 3562.189586]  __kasan_slab_free+0x11d/0x160
[ 3562.190571]  kfree+0xf5/0x2f0
[ 3562.191552]  ib_mad_port_close+0x200/0x380 [ib_core]
[ 3562.192538]  ib_mad_remove_device+0xf0/0x230 [ib_core]
[ 3562.193538]  remove_client_context+0xa6/0xe0 [ib_core]
[ 3562.194514]  disable_device+0x14e/0x260 [ib_core]
[ 3562.195488]  __ib_unregister_device+0x79/0x150 [ib_core]
[ 3562.196462]  ib_unregister_device+0x21/0x30 [ib_core]
[ 3562.197439]  mlx4_ib_remove+0x162/0x690 [mlx4_ib]
[ 3562.198408]  mlx4_remove_device+0x204/0x2c0 [mlx4_core]
[ 3562.199381]  mlx4_unregister_interface+0x49/0x1d0 [mlx4_core]
[ 3562.200356]  mlx4_ib_cleanup+0xc/0x1d [mlx4_ib]
[ 3562.201329]  __x64_sys_delete_module+0x2d2/0x400
[ 3562.202288]  do_syscall_64+0x95/0x470
[ 3562.203277]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The problem was that the MAD PD was deallocated before the MAD CQ.
There was completion work pending for the CQ when the PD got deallocated.
When the mad completion handling reached procedure
ib_mad_post_receive_mads(), we got a use-after-free bug in the following
line of code in that procedure:
   sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey;
(the pd pointer in the above line is no longer valid, because the
pd has been deallocated).

We fix this by allocating the PD before the CQ in procedure
ib_mad_port_open(), and deallocating the PD after freeing the CQ
in procedure ib_mad_port_close().

Since the CQ completion work queue is flushed during ib_free_cq(),
no completions will be pending for that CQ when the PD is later
deallocated.

Note that freeing the CQ before deallocating the PD is the practice
in the ULPs.

Fixes: 4be90bc6 ("IB/mad: Remove ib_get_dma_mr calls")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801121449.24973-1-leon@kernel.orgSigned-off-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e5366d309a772fef264ec85e858f9ea46f939848 ]

Driver shouldn't allow to use UMR to register a MR when
umr_modify_atomic_disabled is set. Otherwise it will always end up with a
failure in the post send flow which sets the UMR WQE to modify atomic access
right.

Fixes: c8d75a98 ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081929.32559-1-leon@kernel.orgSigned-off-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 61f259821dd3306e49b7d42a3f90fb5a4ff3351b ]

Some processors may mispredict an array bounds check and
speculatively access memory that they should not. With
a user supplied array index we like to play things safe
by masking the value with the array size before it is
used as an index.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20190731043957.GA1600@agluck-desk2.amr.corp.intel.comSigned-off-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 090bb803708198e5ab6b0046398c7ed9f4d12d6b ]

Retrieving PHYs can defer the probe, do not spawn an error when
-EPROBE_DEFER is returned, it is normal behavior.

Fixes: b1a9edbd ("ata: libahci: allow to use multiple PHYs")
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 929e571c04c285861e0bb049a396a2bdaea63282 ]

Coccinelle reports a path that the array "data" is never initialized.
The path skips the checks in the conditional branches when either
of callback functions, read_wave_vgprs and read_wave_sgprs, is not
registered. Later, the uninitialized "data" array is read
in the while-loop below and passed to put_user().

Fix the path by allocating the array with kcalloc().

The patch is simplier than adding a fall-back branch that explicitly
calls memset(data, 0, ...). Also it does not need the multiplication
1024*sizeof(*data) as the size parameter for memset() though there is
no risk of integer overflow.
Signed-off-by: NWang Xiayang <xywang.sjtu@sjtu.edu.cn>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e82f04ec6ba91065fd33a6201ffd7cab840e1475 ]

In qla2x00_alloc_fcport(), fcport is assigned to NULL in the error
handling code on line 4880:
    fcport = NULL;

Then fcport is used on lines 4883-4886:
    INIT_WORK(&fcport->del_work, qla24xx_delete_sess_fn);
	INIT_WORK(&fcport->reg_work, qla_register_fcport_fn);
	INIT_LIST_HEAD(&fcport->gnl_entry);
	INIT_LIST_HEAD(&fcport->list);

Thus, possible null-pointer dereferences may occur.

To fix these bugs, qla2x00_alloc_fcport() directly returns NULL
in the error handling code.

These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: NJia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit eeebce1862970653cdf5c01e98bc669edd8f529a ]
Reviewed-by: NBader Ali - Saleh <bader.alisaleh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f4cc743a98136df3c3763050a0e8223b52d9a960 ]

If DRM_LVDS_ENCODER=y but CONFIG_DRM_KMS_HELPER=m,
build fails:

drivers/gpu/drm/bridge/lvds-encoder.o: In function `lvds_encoder_probe':
lvds-encoder.c:(.text+0x155): undefined reference to `devm_drm_panel_bridge_add'
Reported-by: NHulk Robot <hulkci@huawei.com>
Fixes: dbb58bfd ("drm/bridge: Fix lvds-encoder since the panel_bridge rework.")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729071216.27488-1-yuehaibing@huawei.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 71d6c505b4d9e6f76586350450e785e3d452b346 ]

Jeffrin reported a KASAN issue:

  BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70
  Read of size 16 at addr ffffffff91f41f80 by task scsi_eh_1/149
  ...
  The buggy address belongs to the variable:
    cdb.48319+0x0/0x40

Much like commit 18c9a99b ("libata: zpodd: small read overflow in
eject_tray()"), this fixes a cdb[] buffer length, this time in
zpodd_get_mech_type():

We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be
ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes.
Reported-by: NJeffrin Jose T <jeffrin@rajagiritech.edu.in>
Fixes: afe75951 ("libata: identify and init ZPODD devices")
Link: https://lore.kernel.org/lkml/201907181423.E808958@keescook/Tested-by: NJeffrin Jose T <jeffrin@rajagiritech.edu.in>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9a446ef08f3bfc0c3deb9c6be840af2528ef8cf8 ]

The GPCv2 is a stacked IRQ controller below the ARM GIC. It doesn't
care about the IRQ type itself, but needs to forward the type to the
parent IRQ controller, so this one can be configured correctly.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 34f8eb92ca053cbba2887bb7e4dbf2b2cd6eb733 ]

In its_vpe_init, when its_alloc_vpe_table fails, we should free
vpt_page allocated just before, instead of vpe->vpt_page.
Let's fix it.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NNianyao Tang <tangnianyao@huawei.com>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 09e088a4903bd0dd911b4f1732b250130cdaffed ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/xen/xen-pciback/conf_space_capability.c: In function pm_ctrl_write:
drivers/xen/xen-pciback/conf_space_capability.c:119:25: warning:
 variable old_state set but not used [-Wunused-but-set-variable]

It is never used so can be removed.
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e1f1ae8002e4b06addc52443fcd975bbf554ae92 ]

The module reset code in the Renesas CPG/MSSR driver uses
read-modify-write (RMW) operations to write to a Software Reset Register
(SRCRn), and simple writes to write to a Software Reset Clearing
Register (SRSTCLRn), as was mandated by the R-Car Gen2 and Gen3 Hardware
User's Manuals.

However, this may cause a race condition when two devices are reset in
parallel: if the reset for device A completes in the middle of the RMW
operation for device B, device A may be reset again, causing subtle
failures (e.g. i2c timeouts):

	thread A			thread B
	--------			--------

	val = SRCRn
	val |= bit A
	SRCRn = val

	delay

					val = SRCRn (bit A is set)

	SRSTCLRn = bit A
	(bit A in SRCRn is cleared)

					val |= bit B
					SRCRn = val (bit A and B are set)

This can be reproduced on e.g. Salvator-XS using:

    $ while true; do i2cdump -f -y 4 0x6A b > /dev/null; done &
    $ while true; do i2cdump -f -y 2 0x10 b > /dev/null; done &

    i2c-rcar e6510000.i2c: error -110 : 40000002
    i2c-rcar e66d8000.i2c: error -110 : 40000002

According to the R-Car Gen3 Hardware Manual Errata for Rev.
0.80 of Feb 28, 2018, reflected in Rev. 1.00 of the R-Car Gen3 Hardware
User's Manual, writes to SRCRn do not require read-modify-write cycles.

Note that the R-Car Gen2 Hardware User's Manual has not been updated
yet, and still says a read-modify-write sequence is required.  According
to the hardware team, the reset hardware block is the same on both R-Car
Gen2 and Gen3, though.

Hence fix the issue by replacing the read-modify-write operations on
SRCRn by simple writes.
Reported-by: NYao Lihua <Lihua.Yao@desay-svautomotive.com>
Fixes: 6197aa65 ("clk: renesas: cpg-mssr: Add support for reset control")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Tested-by: NLinh Phung <linh.phung.jy@renesas.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c9a67cbb5189e966c70451562b2ca4c3876ab546 ]

Make REGMAP_MMIO selected to avoid undefined reference to regmap symbols.

Fixes: d41f59fd ("clk: sprd: Add common infrastructure")
Signed-off-by: NChunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1573eebeaa8055777eb753f9b4d1cbe653380c38 ]

In clk_generated_determine_rate(), if the divisor is greater than
GENERATED_MAX_DIV + 1, then the wrong best_rate will be returned.
If clk_generated_set_rate() will be called later with this wrong
rate, it will return -EINVAL, so the generated clock won't change
its value. Do no let the divisor be greater than GENERATED_MAX_DIV + 1.

Fixes: 8c7aa632 ("clk: at91: clk-generated: remove useless divisor loop")
Signed-off-by: NCodrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: NLudovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 224c04973db1125fcebefffd86115f99f50f8277 upstream.

get_registers() may fail with -ENOMEM and in this
case we can read a garbage from the status variable tmp.

Reported-by: syzbot+3499a83b2d062ae409d4@syzkaller.appspotmail.com
Signed-off-by: NDenis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 849f5ae3a513c550cad741c68dd3d7eb2bcc2a2c upstream.

The endpoint type should also be checked before a device
is accepted.

Reported-by: syzbot+5efc10c005014d061a74@syzkaller.appspotmail.com
Signed-off-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c88090dfc84254fa149174eb3e6a8458de1912c4 upstream.

The driver should check whether the endpoint it uses has the correct
type.

Reported-by: syzbot+c7df50363aaff50aa363@syzkaller.appspotmail.com
Signed-off-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6d4472d7bec39917b54e4e80245784ea5d60ce49 upstream.

Undo what we did for opening before releasing the memory slice.
Reported-by: Nsyzbot <syzbot+62a1e04fd3ec2abf099e@syzkaller.appspotmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: NHillf Danton <hdanton@sina.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9c09b214f30e3c11f9b0b03f89442df03643794d upstream.

syzbot found the following crash on:

HEAD commit:    e96407b4 usb-fuzzer: main usb gadget fuzzer driver
git tree:       https://github.com/google/kasan.git usb-fuzzer
console output: https://syzkaller.appspot.com/x/log.txt?x=147ac20c600000
kernel config:  https://syzkaller.appspot.com/x/.config?x=792eb47789f57810
dashboard link: https://syzkaller.appspot.com/bug?extid=62a1e04fd3ec2abf099e
compiler:       gcc (GCC) 9.0.0 20181231 (experimental)

==================================================================
BUG: KASAN: use-after-free in __lock_acquire+0x302a/0x3b50
kernel/locking/lockdep.c:3753
Read of size 8 at addr ffff8881cf591a08 by task syz-executor.1/26260

CPU: 1 PID: 26260 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #24
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x6a/0x32c mm/kasan/report.c:351
  __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
  kasan_report+0xe/0x12 mm/kasan/common.c:612
  __lock_acquire+0x302a/0x3b50 kernel/locking/lockdep.c:3753
  lock_acquire+0x127/0x320 kernel/locking/lockdep.c:4412
  __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
  _raw_spin_lock_irqsave+0x32/0x50 kernel/locking/spinlock.c:159
  hiddev_release+0x82/0x520 drivers/hid/usbhid/hiddev.c:221
  __fput+0x2d7/0x840 fs/file_table.c:280
  task_work_run+0x13f/0x1c0 kernel/task_work.c:113
  exit_task_work include/linux/task_work.h:22 [inline]
  do_exit+0x8ef/0x2c50 kernel/exit.c:878
  do_group_exit+0x125/0x340 kernel/exit.c:982
  get_signal+0x466/0x23d0 kernel/signal.c:2728
  do_signal+0x88/0x14e0 arch/x86/kernel/signal.c:815
  exit_to_usermode_loop+0x1a2/0x200 arch/x86/entry/common.c:159
  prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
  syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
  do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x459829
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f75b2a6ccf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 000000000075c078 RCX: 0000000000459829
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 000000000075c078
RBP: 000000000075c070 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000075c07c
R13: 00007ffcdfe1023f R14: 00007f75b2a6d9c0 R15: 000000000075c07c

Allocated by task 104:
  save_stack+0x1b/0x80 mm/kasan/common.c:69
  set_track mm/kasan/common.c:77 [inline]
  __kasan_kmalloc mm/kasan/common.c:487 [inline]
  __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460
  kmalloc include/linux/slab.h:552 [inline]
  kzalloc include/linux/slab.h:748 [inline]
  hiddev_connect+0x242/0x5b0 drivers/hid/usbhid/hiddev.c:900
  hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882
  hid_hw_start drivers/hid/hid-core.c:1981 [inline]
  hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972
  appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308
  hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365
  usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386
  usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
  generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
  usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
  hub_port_connect drivers/usb/core/hub.c:5098 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
  port_event drivers/usb/core/hub.c:5359 [inline]
  hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
  process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
  worker_thread+0x96/0xe20 kernel/workqueue.c:2415
  kthread+0x318/0x420 kernel/kthread.c:255
  ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Freed by task 104:
  save_stack+0x1b/0x80 mm/kasan/common.c:69
  set_track mm/kasan/common.c:77 [inline]
  __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449
  slab_free_hook mm/slub.c:1423 [inline]
  slab_free_freelist_hook mm/slub.c:1470 [inline]
  slab_free mm/slub.c:3012 [inline]
  kfree+0xe4/0x2f0 mm/slub.c:3953
  hiddev_connect.cold+0x45/0x5c drivers/hid/usbhid/hiddev.c:914
  hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882
  hid_hw_start drivers/hid/hid-core.c:1981 [inline]
  hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972
  appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308
  hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365
  usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386
  usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
  generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
  usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
  hub_port_connect drivers/usb/core/hub.c:5098 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
  port_event drivers/usb/core/hub.c:5359 [inline]
  hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
  process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
  worker_thread+0x96/0xe20 kernel/workqueue.c:2415
  kthread+0x318/0x420 kernel/kthread.c:255
  ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

The buggy address belongs to the object at ffff8881cf591900
  which belongs to the cache kmalloc-512 of size 512
The buggy address is located 264 bytes inside of
  512-byte region [ffff8881cf591900, ffff8881cf591b00)
The buggy address belongs to the page:
page:ffffea00073d6400 refcount:1 mapcount:0 mapping:ffff8881da002500
index:0x0 compound_mapcount: 0
flags: 0x200000000010200(slab|head)
raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da002500
raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff8881cf591900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8881cf591980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff8881cf591a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                       ^
  ffff8881cf591a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8881cf591b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

In order to avoid opening a disconnected device, we need to check exist
again after acquiring the existance lock, and bail out if necessary.
Reported-by: Nsyzbot <syzbot+62a1e04fd3ec2abf099e@syzkaller.appspotmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: NHillf Danton <hdanton@sina.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 01ec0a5f19c8c82960a07f6c7410fc9e01d7fb51 upstream.

The ioctl handler uses the intfdata of a second interface,
which may not be present in a broken or malicious device, hence
the intfdata needs to be checked for NULL.

[jkosina@suse.cz: fix newly added spurious space]
Reported-by: syzbot+965152643a75a56737be@syzkaller.appspotmail.com
Signed-off-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c289d6625237aa785b484b4e94c23b3b91ea7e60 upstream.

This reverts commit 7e5d1fd7 ("pwm: Set
class for exported channels in sysfs") as it causes regression with
multiple pwm chip[1], when exporting a pwm channel (echo X > export):

- ABI (Documentation/ABI/testing/sysfs-class-pwm) states pwmX should be
  created in /sys/class/pwm/pwmchipN/pwmX
- Reverted patch causes new entry to be also created directly in
  /sys/class/pwm/pwmX
- 1st time, exporting pwmX will create an entry in /sys/class/pwm/pwmX
- class attributes are added under pwmX folder, such as export, unexport
  npwm, symlinks. This is wrong as it belongs to pwmchipN. It may cause
  bad behavior and report wrong values.
- when another export happens on another pwmchip, it can't be created
  (e.g. -EEXIST). This is causing the issue with multiple pwmchip.

Example on stm32 (stm32429i-eval) platform:
$ ls /sys/class/pwm
pwmchip0 pwmchip4

$ cd /sys/class/pwm/pwmchip0/
$ echo 0 > export
$ ls /sys/class/pwm
pwm0 pwmchip0 pwmchip4

$ cd /sys/class/pwm/pwmchip4/
$ echo 0 > export
sysfs: cannot create duplicate filename '/class/pwm/pwm0'
...Exception stack follows...

This is also seen on other platform [2]

[1] https://lkml.org/lkml/2018/9/25/713
[2] https://lkml.org/lkml/2018/9/25/447Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Tested-by: NGottfried Haider <gottfried.haider@gmail.com>
Tested-by: NMichal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
Cc: John Keeping <john@metanate.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f5a47fae6aa3eb06f100e701d2342ee56b857bee upstream.

We erroneously added a check for FW API version 41 before sending
GEO_TX_POWER_LIMIT, but this was already implemented in version 38.
Additionally, it was cherry-picked to older versions, namely 17, 26
and 29, so check for those as well.

Cc: stable@vger.kernel.org
Fixes: eca1e56ceedd ("iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>