Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
“add3a1bc620bbb7f1bc84f3adf34a66a66254ec8”上不存在“git@gitcode.net:megvii/megengine.git”
切换分支/标签
  1. 13 11月, 2019 1 次提交
    • K
      perf/x86/uncore: Fix event group support · ef38f4d1
      由 Kan Liang 提交于 
      [ Upstream commit 75be6f703a141b048590d659a3954c4fedd30bba ]

The events in the same group don't start or stop simultaneously.
Here is the ftrace when enabling event group for uncore_iio_0:

  # perf stat -e "{uncore_iio_0/event=0x1/,uncore_iio_0/event=0xe/}"

            <idle>-0     [000] d.h.  8959.064832: read_msr: a41, value
  b2b0b030		//Read counter reg of IIO unit0 counter0
            <idle>-0     [000] d.h.  8959.064835: write_msr: a48, value
  400001			//Write Ctrl reg of IIO unit0 counter0 to enable
  counter0. <------ Although counter0 is enabled, Unit Ctrl is still
  freezed. Nothing will count. We are still good here.
            <idle>-0     [000] d.h.  8959.064836: read_msr: a40, value
  30100                   //Read Unit Ctrl reg of IIO unit0
            <idle>-0     [000] d.h.  8959.064838: write_msr: a40, value
  30000			//Write Unit Ctrl reg of IIO unit0 to enable all
  counters in the unit by clear Freeze bit  <------Unit0 is un-freezed.
  Counter0 has been enabled. Now it starts counting. But counter1 has not
  been enabled yet. The issue starts here.
            <idle>-0     [000] d.h.  8959.064846: read_msr: a42, value 0
			//Read counter reg of IIO unit0 counter1
            <idle>-0     [000] d.h.  8959.064847: write_msr: a49, value
  40000e			//Write Ctrl reg of IIO unit0 counter1 to enable
  counter1.   <------ Now, counter1 just starts to count. Counter0 has
  been running for a while.

Current code un-freezes the Unit Ctrl right after the first counter is
enabled. The subsequent group events always loses some counter values.

Implement pmu_enable and pmu_disable support for uncore, which can help
to batch hardware accesses.

No one uses uncore_enable_box and uncore_disable_box. Remove them.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-drivers-review@eclists.intel.com
Cc: linux-perf@eclists.intel.com
Fixes: 087bfbb0 ("perf/x86: Add generic Intel uncore PMU support")
Link: https://lkml.kernel.org/r/1572014593-31591-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      ef38f4d1
  3. 26 7月, 2019 1 次提交
  5. 24 3月, 2019 1 次提交
    • K
      perf/x86/intel/uncore: Fix client IMC events return huge result · 30cedf18
      由 Kan Liang 提交于 
      commit 8041ffd36f42d8521d66dd1e236feb58cecd68bc upstream.

The client IMC bandwidth events currently return very large values:

  $ perf stat -e uncore_imc/data_reads/ -e uncore_imc/data_writes/ -I 10000 -a

  10.000117222 34,788.76 MiB uncore_imc/data_reads/
  10.000117222 8.26 MiB uncore_imc/data_writes/
  20.000374584 34,842.89 MiB uncore_imc/data_reads/
  20.000374584 10.45 MiB uncore_imc/data_writes/
  30.000633299 37,965.29 MiB uncore_imc/data_reads/
  30.000633299 323.62 MiB uncore_imc/data_writes/
  40.000891548 41,012.88 MiB uncore_imc/data_reads/
  40.000891548 6.98 MiB uncore_imc/data_writes/
  50.001142480 1,125,899,906,621,494.75 MiB uncore_imc/data_reads/
  50.001142480 6.97 MiB uncore_imc/data_writes/

The client IMC events are freerunning counters. They still use the
old event encoding format (0x1 for data_read and 0x2 for data write).
The counter bit width is calculated by common code, which assume that
the standard encoding format is used for the freerunning counters.
Error bit width information is calculated.

The patch intends to convert the old client IMC event encoding to the
standard encoding format.

Current common code uses event->attr.config which directly copy from
user space. We should not implicitly modify it for a converted event.
The event->hw.config is used to replace the event->attr.config in
common code.

For client IMC events, the event->attr.config is used to calculate a
converted event with standard encoding format in the custom
event_init(). The converted event is stored in event->hw.config.
For other events of freerunning counters, they already use the standard
encoding format. The same value as event->attr.config is assigned to
event->hw.config in common event_init().
Reported-by: NJin Yao <yao.jin@linux.intel.com>
Tested-by: NJin Yao <yao.jin@linux.intel.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@kernel.org # v4.18+
Fixes: 9aae1780 ("perf/x86/intel/uncore: Clean up client IMC uncore")
Link: https://lkml.kernel.org/r/20190227165729.1861-1-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      30cedf18
  7. 31 7月, 2018 1 次提交
    • K
      perf/x86/intel/uncore: Fix hardcoded index of Broadwell extra PCI devices · 156c8b58
      由 Kan Liang 提交于 
      Masayoshi Mizuma reported that a warning message is shown while a CPU is
hot-removed on Broadwell servers:

  WARNING: CPU: 126 PID: 6 at arch/x86/events/intel/uncore.c:988
  uncore_pci_remove+0x10b/0x150
  Call Trace:
   pci_device_remove+0x42/0xd0
   device_release_driver_internal+0x148/0x220
   pci_stop_bus_device+0x76/0xa0
   pci_stop_root_bus+0x44/0x60
   acpi_pci_root_remove+0x1f/0x80
   acpi_bus_trim+0x57/0x90
   acpi_bus_trim+0x2e/0x90
   acpi_device_hotplug+0x2bc/0x4b0
   acpi_hotplug_work_fn+0x1a/0x30
   process_one_work+0x174/0x3a0
   worker_thread+0x4c/0x3d0
   kthread+0xf8/0x130

This bug was introduced by:

  commit 15a3e845 ("perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs")

The index of "QPI Port 2 filter" was hardcode to 2, but this conflicts with the
index of "PCU.3" which is "HSWEP_PCI_PCU_3", which equals to 2 as well.

To fix the conflict, the hardcoded index needs to be cleaned up:

 - introduce a new enumerator "BDX_PCI_QPI_PORT2_FILTER" for "QPI Port 2
   filter" on Broadwell,
 - increase UNCORE_EXTRA_PCI_DEV_MAX by one,
 - clean up the hardcoded index.
Debugged-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Suggested-by: NIngo Molnar <mingo@kernel.org>
Reported-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Tested-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: msys.mizuma@gmail.com
Cc: stable@vger.kernel.org
Fixes: 15a3e845 ("perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs")
Link: http://lkml.kernel.org/r/1532953688-15008-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      156c8b58
  9. 31 5月, 2018 2 次提交
    • K
      perf/x86/intel/uncore: Expose uncore_pmu_event*() functions · 5a6c9d94
      由 Kan Liang 提交于 
      Some uncores have customized PMU. For customized PMU, it does not need
to customize everything. For example, it only needs to customize init()
function for client IMC uncore. Other functions like
add()/del()/start()/stop()/read() can use generic code.

Expose the uncore_pmu_event_add/del/start/stop() functions.
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1525371913-10597-7-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      5a6c9d94
    • K
      perf/x86/intel/uncore: Add new data structures for free running counters · 927b2deb
      由 Kan Liang 提交于 
      There are a number of free running counters introduced for uncore, which
provide highly valuable information to a wide array of customers.
For example, Skylake Server has IIO free running counters to collect
Input/Output x BW/Utilization.

There is NO event available on the general purpose counters, that is
exactly the same as the free running counters. The generic uncore code
needs to be enhanced to support the new counters.

In the uncore document, there is no event-code assigned to free running
counters. Some events need to be defined to indicate the free running
counters. The events are encoded as event-code + umask-code.

The event-code for all free running counters is 0xff, which is the same
as the fixed counters:

- It has not been decided what code will be used for common events on
  future platforms. 0xff is the only one which will definitely not be
  used as any common event-code.
- Cannot re-use current events on the general purpose counters. Because
  there is NO event available, that is exactly the same as the free
  running counters.
- Even in the existing codes, the fixed counters for core, that have the
  same event-code, may count different things. Hence, it should not
  surprise the users if the free running counters that share the same
  event-code also count different things.
  Umask will be used to distinguish the counters.

The umask-code is used to distinguish a fixed counter and a free running
counter, and different types of free running counters.

For fixed counters, the umask-code is 0x0X, where X indicates the index
of the fixed counter, which starts from 0.

 - Compatible with the old event encoding.

 - Currently, there is only one fixed counter. There are still 15
   reserved spaces for extension.

For free running counters, the umask-code uses the rest of the space.
It would follow the format of 0xXY:

 - X stands for the type of free running counters, which starts from 1.

 - Y stands for the index of free running counters of same type, which
   starts from 0.

- The free running counters do different thing. It can be categorized to
  several types, according to the MSR location, bit width and
  definition. E.g. there are three types of IIO free running counters on
  Skylake server to monitor IO CLOCKS, BANDWIDTH and UTILIZATION  on
  different ports. It makes it easy to locate the free running counter
  of a specific type.

- So far, there are at most 8 counters of each type.  There are still 8
  reserved spaces for extension.

Introducing a new index to indicate the free running counters. Only one
index is enough for all free running counters. Because the free running
counters are always active, and the event and free running counter are
always 1:1 mapped, it does not need extra index to indicate the assigned
counter.

Introducing a new data structure to store free running counters related
information for each type. It includes the number of counters, bit
width, base address, offset between counters and offset between boxes.

Introducing several inline helpers to check index for fixed counter and
free running counter, validate free running counter event, and retrieve
the free running counter information according to box and event.
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1525371913-10597-4-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      927b2deb
  11. 17 11月, 2017 1 次提交
    • A
      perf/x86/intel/uncore: Cache logical pkg id in uncore driver · d46b4c1c
      由 Andi Kleen 提交于 
      The SNB-EP uncore driver is the only user of topology_phys_to_logical_pkg
in a performance critical path.

Change it query the logical pkg ID only once at initialization time and
then cache it in box structure. This allows to change the logical package
management without affecting the performance critical path.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: He Chen <he.chen@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Piotr Luc <piotr.luc@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/20171114124257.22013-2-prarit@redhat.com
      d46b4c1c
  13. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      由 Greg Kroah-Hartman 提交于 
      Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  15. 01 3月, 2017 1 次提交
  17. 10 9月, 2016 1 次提交
    • K
      perf/x86/intel/uncore: Add Skylake server uncore support · cd34cd97
      由 Kan Liang 提交于 
      This patch implements the uncore monitoring driver for Skylake server.
The uncore subsystem in Skylake server is similar to previous
server. There are some differences in config register encoding and pci
device IDs. Besides, Skylake introduces many new boxes to reflect the
MESH architecture changes.

The control registers for IIO and UPI have been extended to 64 bit. This
patch also introduces event_mask_ext to handle the high 32 bit mask.

The CHA box number could vary for different machines. This patch gets
the CHA box number by counting the CHA register space during
initialization at runtime.
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1471378190-17276-3-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      cd34cd97
  19. 05 9月, 2016 1 次提交
  21. 14 7月, 2016 1 次提交
    • P
      x86: Audit and remove any remaining unnecessary uses of module.h · eb008eb6
      由 Paul Gortmaker 提交于 
      Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  In the case of
some of these which are modular, we can extend that to also include
files that are building basic support functionality but not related
to loading or registering the final module; such files also have
no need whatsoever for module.h

The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each instance for the
presence of either and replace as needed.

In the case of crypto/glue_helper.c we delete a redundant instance
of MODULE_LICENSE in order to delete module.h -- the license info
is already present at the top of the file.

The uncore change warrants a mention too; it is uncore.c that uses
module.h and not uncore.h; hence the relocation done there.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160714001901.31603-9-paul.gortmaker@windriver.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      eb008eb6
  23. 07 7月, 2016 1 次提交
  25. 03 6月, 2016 1 次提交
    • K
      perf/x86/intel/uncore: Locate specific box by checking full device info · a54fa079
      由 Kan Liang 提交于 
      Some platforms, e.g. Knights Landing, use a common PCI device ID for
multiple instances of an uncore PMU device type. So it is impossible to
locate the specific instances only by PCI device ID.

The current code specially handles Knights Landing by arbitrarily pointing
an instance to an unused uncore box. However, we still have no idea
which uncore device is mapped to which box.

Furthermore, there could be more platforms which use a common PCI device ID
for uncore devices. We have to specially handle them one by one.

This patch records full device information (slot, func, and device ID)
in id_table[]. So the probe function can point the instance to a specific
uncore box by checking the full device information.
Tested-by: NLukasz Odzioba <lukasz.odzioba@intel.com>
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: tglx@linutronix.de
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bp@suse.de
Cc: harish.chegondi@intel.com
Cc: hubert.chrzaniuk@intel.com
Cc: lawrence.f.meadows@intel.com
Link: http://lkml.kernel.org/r/1463379504-39003-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      a54fa079
  27. 03 3月, 2016 1 次提交
    • I
      perf/x86/uncore: Fix build on UP-IOAPIC configs · 6f6e1516
      由 Ingo Molnar 提交于 
      Commit:

  cf6d445f ("perf/x86/uncore: Track packages, not per CPU data")

reorganized the uncore code to track packages, and introduced a dependency
on MAX_APIC_ID. This constant is not available on UP-IOAPIC builds:

  arch/x86/events/intel/uncore.c:1350:44: error: 'MAX_LOCAL_APIC' undeclared here (not in a function)

Include asm/apicdef.h explicitly to pick it up.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      6f6e1516
  29. 29 2月, 2016 5 次提交
  31. 17 2月, 2016 2 次提交
  33. 22 1月, 2016 1 次提交
  35. 06 1月, 2016 1 次提交
  37. 06 10月, 2015 1 次提交
    • T
      perf/x86/intel/uncore: Fix multi-segment problem of perf_event_intel_uncore · 712df65c
      由 Taku Izumi 提交于 
      In multi-segment system, uncore devices may belong to buses whose segment
number is other than 0:

  ....
  0000:ff:10.5 System peripheral: Intel Corporation Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers (rev 03)
  ...
  0001:7f:10.5 System peripheral: Intel Corporation Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers (rev 03)
  ...
  0001:bf:10.5 System peripheral: Intel Corporation Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers (rev 03)
  ...
  0001:ff:10.5 System peripheral: Intel Corporation Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers (rev 03
  ...

In that case, relation of bus number and physical id may be broken
because "uncore_pcibus_to_physid" doesn't take account of PCI segment.
For example, bus 0000:ff and 0001:ff uses the same entry of
"uncore_pcibus_to_physid" array.

This patch fixes this problem by introducing the segment-aware pci2phy_map instead.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1443096621-4119-1-git-send-email-izumi.taku@jp.fujitsu.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      712df65c
  39. 04 8月, 2015 1 次提交
  41. 09 6月, 2015 1 次提交
    • I
      Revert "perf/x86/intel/uncore: Move uncore_box_init() out of driver initialization" · 15c12479
      由 Ingo Molnar 提交于 
      This reverts commit c05199e5.

Vince Weaver reported the following crash while perf fuzzing:

[   79.473121] kernel BUG at mm/vmalloc.c:1335!
[   79.694391] Call Trace:
[   79.696997]  <IRQ>
[   79.699090]  [<ffffffff811b2130>] get_vm_area_caller+0x40/0x50
[   79.705505]  [<ffffffff81039f4d>] ? snb_uncore_imc_init_box+0x6d/0x90
[   79.712414]  [<ffffffff810635e5>] __ioremap_caller+0x195/0x350
[   79.718610]  [<ffffffff81039f4d>] ? snb_uncore_imc_init_box+0x6d/0x90
[   79.725462]  [<ffffffff81427f6b>] ? debug_object_activate+0x14b/0x1e0
[   79.732346]  [<ffffffff810637b7>] ioremap_nocache+0x17/0x20
[   79.738283]  [<ffffffff81039f4d>] snb_uncore_imc_init_box+0x6d/0x90
[   79.744945]  [<ffffffff81039cf7>] snb_uncore_imc_event_start+0xb7/0x110
[   79.752020]  [<ffffffff81039d97>] snb_uncore_imc_event_add+0x47/0x60
[   79.758832]  [<ffffffff81162cbb>] event_sched_in.isra.85+0xfb/0x330
[   79.765519]  [<ffffffff81162f5f>] group_sched_in+0x6f/0x1e0
[   79.771481]  [<ffffffff8101df1a>] ? native_sched_clock+0x2a/0x90
[   79.777858]  [<ffffffff811637bc>] __perf_event_enable+0x25c/0x2a0
[   79.784418]  [<ffffffff810f3e69>] ? tick_nohz_irq_exit+0x29/0x30
[   79.790820]  [<ffffffff8115ef30>] ? cpu_clock_event_start+0x40/0x40
[   79.797546]  [<ffffffff8115ef80>] remote_function+0x50/0x60
[   79.803535]  [<ffffffff810f8cd1>] flush_smp_call_function_queue+0x81/0x180
[   79.810840]  [<ffffffff810f9763>] generic_smp_call_function_single_interrupt+0x13/0x60
[   79.819328]  [<ffffffff8104b5e8>] smp_trace_call_function_single_interrupt+0x38/0xc0
[   79.827614]  [<ffffffff816de9be>] trace_call_function_single_interrupt+0x6e/0x80
[   79.835465]  <EOI>
[   79.837543]  [<ffffffff8156e8b5>] ? cpuidle_enter_state+0x65/0x160
[   79.844377]  [<ffffffff8156e8a1>] ? cpuidle_enter_state+0x51/0x160
[   79.851015]  [<ffffffff8156e9e7>] cpuidle_enter+0x17/0x20
[   79.856791]  [<ffffffff810b6e39>] cpu_startup_entry+0x399/0x440
[   79.863165]  [<ffffffff816c9ddb>] rest_init+0xbb/0xd0

The offending commit is clearly confused as it moves heavy initialization
work into IPI context.

Revert it.
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      15c12479
  43. 27 5月, 2015 1 次提交
    • P
      perf/x86: Fix event/group validation · b371b594
      由 Peter Zijlstra 提交于 
      Commit 43b45780 ("perf/x86: Reduce stack usage of
x86_schedule_events()") violated the rule that 'fake' scheduling; as
used for event/group validation; should not change the event state.

This went mostly un-noticed because repeated calls of
x86_pmu::get_event_constraints() would give the same result. And
x86_pmu::put_event_constraints() would mostly not do anything.

Commit e979121b ("perf/x86/intel: Implement cross-HT corruption
bug workaround") made the situation much worse by actually setting the
event->hw.constraint value to NULL, so when validation and actual
scheduling interact we get NULL ptr derefs.

Fix it by removing the constraint pointer from the event and move it
back to an array, this time in cpuc instead of on the stack.

validate_group()
  x86_schedule_events()
    event->hw.constraint = c; # store

      <context switch>
        perf_task_event_sched_in()
          ...
            x86_schedule_events();
              event->hw.constraint = c2; # store

              ...

              put_event_constraints(event); # assume failure to schedule
                intel_put_event_constraints()
                  event->hw.constraint = NULL;

      <context switch end>

    c = event->hw.constraint; # read -> NULL

    if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref

This in particular is possible when the event in question is a
cpu-wide event and group-leader, where the validate_group() tries to
add an event to the group.
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Hunter <ahh@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 43b45780 ("perf/x86: Reduce stack usage of x86_schedule_events()")
Fixes: e979121b ("perf/x86/intel: Implement cross-HT corruption bug workaround")
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      b371b594
  45. 11 5月, 2015 1 次提交
  47. 28 1月, 2015 1 次提交
  49. 09 1月, 2015 1 次提交
  51. 24 9月, 2014 1 次提交
  53. 13 8月, 2014 5 次提交
  55. 22 2月, 2014 3 次提交