1. 03 2月, 2018 3 次提交
    • A
      tools headers: Synchoronize x86 features UAPI headers · 4053717a
      Arnaldo Carvalho de Melo 提交于
      Sync tools/arch/x86/include/asm/{cpu,disabled-,required-}features.h with
      the changes in:
      
        2961298e ("x86/cpufeatures: Clean up Spectre v2 related CPUID flags")
        20ffa1ca ("x86/speculation: Add basic IBPB (Indirect Branch Prediction Barrier) support")
        5d10cbc9 ("x86/cpufeatures: Add AMD feature bits for Speculation Control")
        fc67dd70 ("x86/cpufeatures: Add Intel feature bits for Speculation Control")
        95ca0ee8 ("x86/cpufeatures: Add CPUID_7_EDX CPUID leaf")
        a511e793 ("x86/intel_rdt: Enumerate L2 Code and Data Prioritization (CDP) feature")
        4fdec203 ("x86/cpufeature: Move processor tracing out of scattered features")
        c995efd5 ("x86/retpoline: Fill RSB on context switch for affected CPUs")
        76b04384 ("x86/retpoline: Add initial retpoline support")
        99c6fa25 ("x86/cpufeatures: Add X86_BUG_SPECTRE_V[12]")
        de791821 ("x86/pti: Rename BUG_CPU_INSECURE to BUG_CPU_MELTDOWN")
        6cff64b8 ("x86/mm: Use INVPCID for __native_flush_tlb_single()")
      
      None will entail changes in the tools/perf/, synchronizing to elliminate
      these perf build warnings:
      
        Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
        Warning: Kernel ABI header at 'tools/arch/x86/include/asm/required-features.h' differs from latest version at 'arch/x86/include/asm/required-features.h'
        Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
      
      Cc: Adrian Hunter <adrian.hunter@intel.com>
      Cc: Dave Hansen <dave.hansen@linux.intel.com>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: David Woodhouse <dwmw@amazon.co.uk>
      Cc: Fenghua Yu <fenghua.yu@intel.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Wang Nan <wangnan0@huawei.com>
      Link: https://lkml.kernel.org/n/tip-dbdjack1k92xar5ccuq4el1h@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      4053717a
    • A
      tools headers: Sync {tools/,}arch/powerpc/include/uapi/asm/kvm.h · 1b8f5160
      Arnaldo Carvalho de Melo 提交于
      The changes in the 3214d01f ("KVM: PPC: Book3S: Provide information
      about hardware/firmware CVE workarounds") commit right now will not
      produce any change in the tools, but that is because we still need to
      improve tools/perf/trace/beauty/kvm_ioctl.sh to build per arch string
      tables, so that we avoid assigning multiple times to the same command
      string entry, i.e. multiple defines, for different arches, have the same
      value, causing this:
      
        In file included from trace/beauty/ioctl.c:82:0:
        /tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c: In function ‘ioctl__scnprintf_kvm_cmd’:
        /tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c:76:11: error: initialized field overwritten [-Werror=override-init]
        /tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c:88:11: note: (near initialization for ‘kvm_ioctl_cmds[165]’)
        /tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c:90:11: error: initialized field overwritten [-Werror=override-init]
          [0xa6] = "PPC_GET_SMMU_INFO",
                   ^~~~~~~~~~~~~~~~~~~
      
      So the onlye effect of updating the tools/ copy of ppc's kvm.h header
      is to silence these perf build warnings:
      
        Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
        Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h'
      
      At some point we should do what we did for the errno tables and create
      per-arch string translation tables for the KVM ioctl commands for the
      architectures supporting KVM, such as s/390, PowerPC, x86_64 and ARM.
      
      Cc: Adrian Hunter <adrian.hunter@intel.com>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Paul Mackerras <paulus@ozlabs.org>
      Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
      Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
      Cc: Wang Nan <wangnan0@huawei.com>
      Link: https://lkml.kernel.org/n/tip-jmcf78tqiudgn46zqfw2tgt2@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1b8f5160
    • A
      tooling headers: Synchronize updated s390 kvm UAPI headers · 9a385358
      Arnaldo Carvalho de Melo 提交于
      The 35b3fde6 ("KVM: s390: wire up bpb feature") was noticed by the
      perf build process:
      
        Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'
      
      The changes in this cset don't cause or require changes in tools/perf/,
      so just update the copy to silence the build warning.
      
      Cc: Adrian Hunter <adrian.hunter@intel.com>
      Cc: Christian Borntraeger <borntraeger@de.ibm.com>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Radim Krčmář <rkrcmar@redhat.com>
      Cc: Wang Nan <wangnan0@huawei.com>
      Link: https://lkml.kernel.org/n/tip-kif2fdkcaewj8iqw6lwyil8s@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      9a385358
  2. 23 1月, 2018 1 次提交
  3. 10 1月, 2018 1 次提交
  4. 27 12月, 2017 1 次提交
  5. 19 12月, 2017 1 次提交
    • H
      bpf: fix broken BPF selftest build on s390 · c682ccc4
      Hendrik Brueckner 提交于
      With 720f228e ("bpf: fix broken BPF selftest build") the
      inclusion of arch-specific header files changed.  Including the
      asm/bpf_perf_event.h on s390, correctly includes the s390 specific
      header file.  This header file tries then to include the s390
      asm/ptrace.h and the build fails with:
      
      cc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../../include/generated  -I../../../include    test_verifier.c
      +/root/git/linux/tools/testing/selftests/bpf/libbpf.a /root/git/linux/tools/testing/selftests/bpf/cgroup_helpers.c -lcap -lelf -o
      +/root/git/linux/tools/testing/selftests/bpf/test_verifier
      In file included from ../../../include/uapi/asm/bpf_perf_event.h:4:0,
                       from ../../../include/uapi/linux/bpf_perf_event.h:11,
                       from test_verifier.c:29:
      ../../../include/uapi/../../arch/s390/include/uapi/asm/bpf_perf_event.h:7:9: error: unknown type name 'user_pt_regs'
       typedef user_pt_regs bpf_user_pt_regs_t;
               ^~~~~~~~~~~~
      make: *** [../lib.mk:109: /root/git/linux/tools/testing/selftests/bpf/test_verifier] Error 1
      
      This is caused by a recent update to the s390 asm/ptrace.h file
      that is not (yet) available in the local installation.  That means,
      the s390 asm/ptrace.h must be included from the tools/arch/s390
      directory.
      
      Because there is no proper framework to deal with asm specific
      includes in tools/, slightly modify the s390 asm/bpf_perf_event.h
      to include the local ptrace.h header file.
      
      See also discussion on
      https://marc.info/?l=linux-s390&m=151359424420691&w=2
      
      Please note that this needs to be preserved until tools/ is able to
      correctly handle asm specific headers.
      
      References: https://marc.info/?l=linux-s390&m=151359424420691&w=2
      Fixes: 720f228e ("bpf: fix broken BPF selftest build")
      Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
      Cc: Daniel Borkmann <daniel@iogearbox.net>
      Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
      Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
      Cc: Alexei Starovoitov <ast@kernel.org>
      Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      c682ccc4
  6. 18 12月, 2017 1 次提交
    • A
      tools arch s390: Do not include header files from the kernel sources · 10b9baa7
      Arnaldo Carvalho de Melo 提交于
      Long ago we decided to be verbotten including files in the kernel git
      sources from tools/ living source code, to avoid disturbing kernel
      development (and perf's and other tools/) when, say, a kernel hacker
      adds something, tests everything but tools/ and have tools/ build
      broken.
      
      This got broken recently by s/390, fix it by copying
      arch/s390/include/uapi/asm/perf_regs.h to tools/arch/s390/include/uapi/asm/,
      making this one be used by means of <asm/perf_regs.h> and updating
      tools/perf/check_headers.sh to make sure we are notified when the
      original changes, so that we can check if anything is needed on the
      tooling side.
      
      This would have been caught by the 'tarkpg' test entry in:
      
      $ make -C tools/perf build-test
      
      When run on a s/390 build system or container.
      Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
      Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Adrian Hunter <adrian.hunter@intel.com>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Wang Nan <wangnan0@huawei.com>
      Fixes: f704ef44 ("s390/perf: add support for perf_regs and libdw")
      Link: https://lkml.kernel.org/n/tip-n57139ic0v9uffx8wdqi3d8a@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      10b9baa7
  7. 15 12月, 2017 1 次提交
    • I
      tools/headers: Synchronize kernel <-> tooling headers · 643e345c
      Ingo Molnar 提交于
      Two kernel headers got modified recently, which are used by tooling as well:
      
       tools/include/uapi/linux/kvm.h
       arch/x86/include/asm/cpufeatures.h
      
      None of those changes have an effect on tooling, so do a plain copy.
      
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      643e345c
  8. 07 12月, 2017 1 次提交
    • I
      tooling/headers: Synchronize updated s390 and x86 UAPI headers · 34c9ca37
      Ingo Molnar 提交于
      There were two trivial updates to these upstream UAPI headers:
      
        arch/s390/include/uapi/asm/kvm.h
        arch/s390/include/uapi/asm/kvm_perf.h
        arch/x86/lib/x86-opcode-map.txt
      
      Synchronize them with their tooling copies.
      
      (The x86 opcode map includes a new instruction pattern now.)
      
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      34c9ca37
  9. 05 12月, 2017 1 次提交
  10. 29 11月, 2017 2 次提交
    • A
      tools headers: Synchronize KVM arch ABI headers · 374fbe56
      Arnaldo Carvalho de Melo 提交于
      To pick up changes from these csets:
      
        da9a1446 ("KVM: s390: provide a capability for AIS state migration")
        5c5196da ("KVM: arm/arm64: Support EL1 phys timer register access in set/get reg")
      
      None of which affects buildint tools/perf/.
      
      Cc: Adrian Hunter <adrian.hunter@intel.com>
      Cc: Christian Borntraeger <borntraeger@de.ibm.com>
      Cc: Christoffer Dall <cdall@linaro.org>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Wang Nan <wangnan0@huawei.com>
      Link: https://lkml.kernel.org/n/tip-dd72s6izo4qdzt1isowlz8ji@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      374fbe56
    • I
      tools/headers: Synchronize kernel x86 UAPI headers · 0b44cfb8
      Ingo Molnar 提交于
      Two x86 headers got modified in this merge window:
      
       arch/x86/include/asm/cpufeatures.h
       arch/x86/include/asm/disabled-features.h
      
      To support x86 UMIP feature, to add new AVX instructions, plus cleanups.
      
      None of those changes have an effect on tooling, so do a plain copy.
      
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      0b44cfb8
  11. 04 11月, 2017 1 次提交
    • I
      tools/headers: Synchronize kernel ABI headers · fb7df12d
      Ingo Molnar 提交于
      After the SPDX license tags were added a number of tooling headers got out of
      sync with their kernel variants, generating lots of build warnings.
      
      Sync them:
      
       - tools/arch/x86/include/asm/disabled-features.h,
         tools/arch/x86/include/asm/required-features.h,
         tools/include/linux/hash.h:
      
           Remove the SPDX tag where the kernel version does not have it.
      
       - tools/include/asm-generic/bitops/__fls.h,
         tools/include/asm-generic/bitops/arch_hweight.h,
         tools/include/asm-generic/bitops/const_hweight.h,
         tools/include/asm-generic/bitops/fls.h,
         tools/include/asm-generic/bitops/fls64.h,
         tools/include/uapi/asm-generic/ioctls.h,
         tools/include/uapi/asm-generic/mman-common.h,
         tools/include/uapi/sound/asound.h,
         tools/include/uapi/linux/kvm.h,
         tools/include/uapi/linux/perf_event.h,
         tools/include/uapi/linux/sched.h,
         tools/include/uapi/linux/vhost.h,
         tools/include/uapi/sound/asound.h:
      
           Add the SPDX tag of the respective kernel header.
      
       - tools/include/uapi/linux/bpf_common.h,
         tools/include/uapi/linux/fcntl.h,
         tools/include/uapi/linux/hw_breakpoint.h,
         tools/include/uapi/linux/mman.h,
         tools/include/uapi/linux/stat.h,
      
           Change the tag to the kernel header version:
      
             -/* SPDX-License-Identifier: GPL-2.0 */
             +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
      
      Also sync other header details:
      
       - include/uapi/sound/asound.h:
      
           Fix pointless end of line whitespace noise the header grew in this cycle.
      
       - tools/arch/x86/lib/memcpy_64.S:
      
           Sync the code and add tools/include/asm/export.h with dummy wrappers
           to support building the kernel side code in a tooling header environment.
      
       - tools/include/uapi/asm-generic/mman.h,
         tools/include/uapi/linux/bpf.h:
      
           Sync other details that don't impact tooling's use of the ABIs.
      Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: linux-kernel@vger.kernel.org
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Stephen Rothwell <sfr@canb.auug.org.au>
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      fb7df12d
  12. 02 11月, 2017 3 次提交
    • G
      License cleanup: add SPDX license identifier to uapi header files with a license · e2be04c7
      Greg Kroah-Hartman 提交于
      Many user space API headers have licensing information, which is either
      incomplete, badly formatted or just a shorthand for referring to the
      license under which the file is supposed to be.  This makes it hard for
      compliance tools to determine the correct license.
      
      Update these files with an SPDX license identifier.  The identifier was
      chosen based on the license information in the file.
      
      GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
      identifier with the added 'WITH Linux-syscall-note' exception, which is
      the officially assigned exception identifier for the kernel syscall
      exception:
      
         NOTE! This copyright does *not* cover user programs that use kernel
         services by normal system calls - this is merely considered normal use
         of the kernel, and does *not* fall under the heading of "derived work".
      
      This exception makes it possible to include GPL headers into non GPL
      code, without confusing license compliance tools.
      
      Headers which have either explicit dual licensing or are just licensed
      under a non GPL license are updated with the corresponding SPDX
      identifier and the GPLv2 with syscall exception identifier.  The format
      is:
              ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)
      
      SPDX license identifiers are a legally binding shorthand, which can be
      used instead of the full boiler plate text.  The update does not remove
      existing license information as this has to be done on a case by case
      basis and the copyright holders might have to be consulted. This will
      happen in a separate step.
      
      This patch is based on work done by Thomas Gleixner and Kate Stewart and
      Philippe Ombredanne.  See the previous patch in this series for the
      methodology of how this patch was researched.
      Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
      Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
      Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e2be04c7
    • G
      License cleanup: add SPDX license identifier to uapi header files with no license · 6f52b16c
      Greg Kroah-Hartman 提交于
      Many user space API headers are missing licensing information, which
      makes it hard for compliance tools to determine the correct license.
      
      By default are files without license information under the default
      license of the kernel, which is GPLV2.  Marking them GPLV2 would exclude
      them from being included in non GPLV2 code, which is obviously not
      intended. The user space API headers fall under the syscall exception
      which is in the kernels COPYING file:
      
         NOTE! This copyright does *not* cover user programs that use kernel
         services by normal system calls - this is merely considered normal use
         of the kernel, and does *not* fall under the heading of "derived work".
      
      otherwise syscall usage would not be possible.
      
      Update the files which contain no license information with an SPDX
      license identifier.  The chosen identifier is 'GPL-2.0 WITH
      Linux-syscall-note' which is the officially assigned identifier for the
      Linux syscall exception.  SPDX license identifiers are a legally binding
      shorthand, which can be used instead of the full boiler plate text.
      
      This patch is based on work done by Thomas Gleixner and Kate Stewart and
      Philippe Ombredanne.  See the previous patch in this series for the
      methodology of how this patch was researched.
      Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
      Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
      Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6f52b16c
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      Greg Kroah-Hartman 提交于
      Many source files in the tree are missing licensing information, which
      makes it harder for compliance tools to determine the correct license.
      
      By default all files without license information are under the default
      license of the kernel, which is GPL version 2.
      
      Update the files which contain no license information with the 'GPL-2.0'
      SPDX license identifier.  The SPDX identifier is a legally binding
      shorthand, which can be used instead of the full boiler plate text.
      
      This patch is based on work done by Thomas Gleixner and Kate Stewart and
      Philippe Ombredanne.
      
      How this work was done:
      
      Patches were generated and checked against linux-4.14-rc6 for a subset of
      the use cases:
       - file had no licensing information it it.
       - file was a */uapi/* one with no licensing information in it,
       - file was a */uapi/* one with existing licensing information,
      
      Further patches will be generated in subsequent months to fix up cases
      where non-standard license headers were used, and references to license
      had to be inferred by heuristics based on keywords.
      
      The analysis to determine which SPDX License Identifier to be applied to
      a file was done in a spreadsheet of side by side results from of the
      output of two independent scanners (ScanCode & Windriver) producing SPDX
      tag:value files created by Philippe Ombredanne.  Philippe prepared the
      base worksheet, and did an initial spot review of a few 1000 files.
      
      The 4.13 kernel was the starting point of the analysis with 60,537 files
      assessed.  Kate Stewart did a file by file comparison of the scanner
      results in the spreadsheet to determine which SPDX license identifier(s)
      to be applied to the file. She confirmed any determination that was not
      immediately clear with lawyers working with the Linux Foundation.
      
      Criteria used to select files for SPDX license identifier tagging was:
       - Files considered eligible had to be source code files.
       - Make and config files were included as candidates if they contained >5
         lines of source
       - File already had some variant of a license header in it (even if <5
         lines).
      
      All documentation files were explicitly excluded.
      
      The following heuristics were used to determine which SPDX license
      identifiers to apply.
      
       - when both scanners couldn't find any license traces, file was
         considered to have no license information in it, and the top level
         COPYING file license applied.
      
         For non */uapi/* files that summary was:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|-------
         GPL-2.0                                              11139
      
         and resulted in the first patch in this series.
      
         If that file was a */uapi/* path one, it was "GPL-2.0 WITH
         Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|-------
         GPL-2.0 WITH Linux-syscall-note                        930
      
         and resulted in the second patch in this series.
      
       - if a file had some form of licensing information in it, and was one
         of the */uapi/* ones, it was denoted with the Linux-syscall-note if
         any GPL family license was found in the file or had no licensing in
         it (per prior point).  Results summary:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|------
         GPL-2.0 WITH Linux-syscall-note                       270
         GPL-2.0+ WITH Linux-syscall-note                      169
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
         LGPL-2.1+ WITH Linux-syscall-note                      15
         GPL-1.0+ WITH Linux-syscall-note                       14
         ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
         LGPL-2.0+ WITH Linux-syscall-note                       4
         LGPL-2.1 WITH Linux-syscall-note                        3
         ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
         ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
      
         and that resulted in the third patch in this series.
      
       - when the two scanners agreed on the detected license(s), that became
         the concluded license(s).
      
       - when there was disagreement between the two scanners (one detected a
         license but the other didn't, or they both detected different
         licenses) a manual inspection of the file occurred.
      
       - In most cases a manual inspection of the information in the file
         resulted in a clear resolution of the license that should apply (and
         which scanner probably needed to revisit its heuristics).
      
       - When it was not immediately clear, the license identifier was
         confirmed with lawyers working with the Linux Foundation.
      
       - If there was any question as to the appropriate license identifier,
         the file was flagged for further research and to be revisited later
         in time.
      
      In total, over 70 hours of logged manual review was done on the
      spreadsheet to determine the SPDX license identifiers to apply to the
      source files by Kate, Philippe, Thomas and, in some cases, confirmation
      by lawyers working with the Linux Foundation.
      
      Kate also obtained a third independent scan of the 4.13 code base from
      FOSSology, and compared selected files where the other two scanners
      disagreed against that SPDX file, to see if there was new insights.  The
      Windriver scanner is based on an older version of FOSSology in part, so
      they are related.
      
      Thomas did random spot checks in about 500 files from the spreadsheets
      for the uapi headers and agreed with SPDX license identifier in the
      files he inspected. For the non-uapi files Thomas did random spot checks
      in about 15000 files.
      
      In initial set of patches against 4.14-rc6, 3 files were found to have
      copy/paste license identifier errors, and have been fixed to reflect the
      correct identifier.
      
      Additionally Philippe spent 10 hours this week doing a detailed manual
      inspection and review of the 12,461 patched files from the initial patch
      version early this week with:
       - a full scancode scan run, collecting the matched texts, detected
         license ids and scores
       - reviewing anything where there was a license detected (about 500+
         files) to ensure that the applied SPDX license was correct
       - reviewing anything where there was no detection but the patch license
         was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
         SPDX license was correct
      
      This produced a worksheet with 20 files needing minor correction.  This
      worksheet was then exported into 3 different .csv files for the
      different types of files to be modified.
      
      These .csv files were then reviewed by Greg.  Thomas wrote a script to
      parse the csv files and add the proper SPDX tag to the file, in the
      format that the file expected.  This script was further refined by Greg
      based on the output to detect more types of files automatically and to
      distinguish between header and source .c files (which need different
      comment types.)  Finally Greg ran the script using the .csv files to
      generate the patches.
      Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
      Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
      Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  13. 25 10月, 2017 1 次提交
    • M
      locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns... · 6aa7de05
      Mark Rutland 提交于
      locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()
      
      Please do not apply this to mainline directly, instead please re-run the
      coccinelle script shown below and apply its output.
      
      For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
      preference to ACCESS_ONCE(), and new code is expected to use one of the
      former. So far, there's been no reason to change most existing uses of
      ACCESS_ONCE(), as these aren't harmful, and changing them results in
      churn.
      
      However, for some features, the read/write distinction is critical to
      correct operation. To distinguish these cases, separate read/write
      accessors must be used. This patch migrates (most) remaining
      ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
      coccinelle script:
      
      ----
      // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
      // WRITE_ONCE()
      
      // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
      
      virtual patch
      
      @ depends on patch @
      expression E1, E2;
      @@
      
      - ACCESS_ONCE(E1) = E2
      + WRITE_ONCE(E1, E2)
      
      @ depends on patch @
      expression E;
      @@
      
      - ACCESS_ONCE(E)
      + READ_ONCE(E)
      ----
      Signed-off-by: NMark Rutland <mark.rutland@arm.com>
      Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: davem@davemloft.net
      Cc: linux-arch@vger.kernel.org
      Cc: mpe@ellerman.id.au
      Cc: shuah@kernel.org
      Cc: snitzer@redhat.com
      Cc: thor.thayer@linux.intel.com
      Cc: tj@kernel.org
      Cc: viro@zeniv.linux.org.uk
      Cc: will.deacon@arm.com
      Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      6aa7de05
  14. 25 9月, 2017 1 次提交
    • I
      tools include: Sync kernel ABI headers with tooling headers · 549a3976
      Ingo Molnar 提交于
      Time for a sync with ABI/uapi headers with the upcoming v4.14 kernel.
      
      None of the ABI changes require any source code level changes to our
      existing in-kernel tooling code:
      
        - tools/arch/s390/include/uapi/asm/kvm.h:
      
            New KVM_S390_VM_TOD_EXT ABI, not used by in-kernel tooling.
      
        - tools/arch/x86/include/asm/cpufeatures.h:
          tools/arch/x86/include/asm/disabled-features.h:
      
            New PCID, SME and VGIF x86 CPU feature bits defined.
      
        - tools/include/asm-generic/hugetlb_encode.h:
          tools/include/uapi/asm-generic/mman-common.h:
          tools/include/uapi/linux/mman.h:
      
            Two new madvise() flags, plus a hugetlb system call mmap flags
            restructuring/extension changes.
      
        - tools/include/uapi/drm/drm.h:
          tools/include/uapi/drm/i915_drm.h:
      
            New drm_syncobj_create flags definitions, new drm_syncobj_wait
            and drm_syncobj_array ABIs. DRM_I915_PERF_* calls and a new
            I915_PARAM_HAS_EXEC_FENCE_ARRAY ABI for the Intel driver.
      
        - tools/include/uapi/linux/bpf.h:
      
            New bpf_sock fields (::mark and ::priority), new XDP_REDIRECT
            action, new kvm_ppc_smmu_info fields (::data_keys, instr_keys)
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      Cc: Adrian Hunter <adrian.hunter@intel.com>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Milian Wolff <milian.wolff@kdab.com>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Taeung Song <treeze.taeung@gmail.com>
      Cc: Wang Nan <wangnan0@huawei.com>
      Cc: Yao Jin <yao.jin@linux.intel.com>
      Link: http://lkml.kernel.org/r/20170913073823.lxmi4c7ejqlfabjx@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      549a3976
  15. 29 8月, 2017 1 次提交
    • A
      tools headers: Sync cpu features kernel ABI headers with tooling headers · a2105f8a
      Arnaldo Carvalho de Melo 提交于
      These changes made the tools/arch/x86/include/ headers to drift from its
      kernel origins:
      
        910448bb ("perf/x86/amd/uncore: Rename cpufeatures macro for cache counters")
        5442c269 ("x86/cpufeature, kvm/svm: Rename (shorten) the new "virtualized VMSAVE/VMLOAD" CPUID flag")
        cba4671a ("x86/mm: Disable PCID on 32-bit kernels")
      
      Which was detected while building perf:
      
        make: Entering directory '/home/acme/git/linux/tools/perf'
          BUILD:   Doing 'make -j4' parallel build
        Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
        Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
      
      This sync causes just these perf object files to be rebuilt:
      
        CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
        CC       /tmp/build/perf/bench/mem-memset-x86-64-asm.o
      
      And the changes in the above changesets don't entail any need for change
      in the above 'perf bench' files.
      
      Cc: Adrian Hunter <adrian.hunter@intel.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Borislav Petkov <bp@suse.de>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Wang Nan <wangnan0@huawei.com>
      Link: http://lkml.kernel.org/n/tip-456aafouj911a4x4zwt8stkm@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a2105f8a
  16. 22 8月, 2017 1 次提交
  17. 31 7月, 2017 1 次提交
    • I
      tools headers: Sync kernel ABI headers with tooling headers · a40f6177
      Ingo Molnar 提交于
      Sync up (copy) the following v4.13 kernel headers to the tooling headers:
      
        arch/arm/include/uapi/asm/kvm.h:
        arch/arm64/include/uapi/asm/kvm.h:
        arch/powerpc/include/uapi/asm/kvm.h:
        arch/s390/include/uapi/asm/kvm.h:
      
         - KVM ABI extensions, which do not affect perf tooling
      
        arch/x86/include/asm/cpufeatures.h:
        arch/x86/include/asm/disabled-features.h:
      
         - New PCID CPU feature on Intel CPUs - does not affect tooling.
      
      I.e. no real changes were needed to resolve the build warnings, just a plain copy
      of the latest kernel header version.
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      Cc: Adrian Hunter <adrian.hunter@intel.com>
      Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
      Cc: Andi Kleen <ak@linux.intel.com>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: David Carrillo-Cisneros <davidcc@google.com>
      Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
      Cc: Geneviève Bastien <gbastien@versatic.net>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Julien Desfossez <jdesfossez@efficios.com>
      Cc: Martin Liška <mliska@suse.cz>
      Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
      Cc: Milian Wolff <milian.wolff@kdab.com>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Paul Turner <pjt@google.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Simon Que <sque@chromium.org>
      Cc: Stephane Eranian <eranian@google.com>
      Cc: Taeung Song <treeze.taeung@gmail.com>
      Cc: Wang Nan <wangnan0@huawei.com>
      Link: http://lkml.kernel.org/r/20170730095232.4j4xigsoqwufl5hu@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a40f6177
  18. 19 7月, 2017 2 次提交
  19. 24 5月, 2017 1 次提交
    • I
      tools/include: Sync kernel ABI headers with tooling headers · 6e30437b
      Ingo Molnar 提交于
      Sync (copy) the following v4.12 kernel headers to the tooling headers:
      
        arch/x86/include/asm/disabled-features.h:
        arch/x86/include/uapi/asm/kvm.h:
        arch/powerpc/include/uapi/asm/kvm.h:
        arch/s390/include/uapi/asm/kvm.h:
        arch/arm/include/uapi/asm/kvm.h:
        arch/arm64/include/uapi/asm/kvm.h:
      
         - 'struct kvm_sync_regs' got changed in an ABI-incompatible way,
           fortunately none of the (in-kernel) tooling relied on it
      
         - new KVM_DEV calls added
      
        arch/x86/include/asm/required-features.h:
      
         - 5-level paging hardware ABI detail added
      
        arch/x86/include/asm/cpufeatures.h:
      
         - new CPU feature added
      
        arch/x86/include/uapi/asm/vmx.h:
      
         - new VMX exit conditions
      
      None of the changes requires fixes in the tooling source code.
      
      This addresses the following warnings:
      
        Warning: include/uapi/linux/stat.h differs from kernel
        Warning: arch/x86/include/asm/disabled-features.h differs from kernel
        Warning: arch/x86/include/asm/required-features.h differs from kernel
        Warning: arch/x86/include/asm/cpufeatures.h differs from kernel
        Warning: arch/x86/include/uapi/asm/kvm.h differs from kernel
        Warning: arch/x86/include/uapi/asm/vmx.h differs from kernel
        Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel
        Warning: arch/s390/include/uapi/asm/kvm.h differs from kernel
        Warning: arch/arm/include/uapi/asm/kvm.h differs from kernel
        Warning: arch/arm64/include/uapi/asm/kvm.h differs from kernel
      
      Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Milian Wolff <milian.wolff@kdab.com>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Yao Jin <yao.jin@linux.intel.com>
      Cc: kernel-team@lge.com
      Link: http://lkml.kernel.org/r/20170524065721.j2mlch6bgk5klgbc@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      6e30437b
  20. 26 4月, 2017 1 次提交
  21. 25 4月, 2017 2 次提交
  22. 21 3月, 2017 2 次提交
  23. 18 3月, 2017 1 次提交
  24. 16 3月, 2017 1 次提交
  25. 04 3月, 2017 2 次提交
  26. 31 1月, 2017 1 次提交
    • I
      tools headers: Sync {tools/,}arch/powerpc/include/uapi/asm/kvm.h,... · c0621acf
      Ingo Molnar 提交于
      tools headers: Sync {tools/,}arch/powerpc/include/uapi/asm/kvm.h, {tools/,}arch/x86/include/asm/cpufeatures.h and {tools/,}arch/arm/include/uapi/asm/kvm.h
      
      The following upstream headers were updated:
      
       - The x86 cpufeatures.h file picked up a couple of new feature entries
       - The PowerPC and ARM KVM headers picked up new features
      
      None of which requires changes to perf tooling, so refresh the tooling copy.
      
      Solves these build time warnings:
      
       Warning: arch/x86/include/asm/cpufeatures.h differs from kernel
       Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel
       Warning: arch/arm/include/uapi/asm/kvm.h differs from kernel
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Link: http://lkml.kernel.org/r/20170130081131.GA8322@gmail.com
      [ resync tools/arch/x86/include/asm/cpufeatures.h ]
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c0621acf
  27. 17 1月, 2017 1 次提交
  28. 12 1月, 2017 1 次提交
    • A
      tools: Sync x86's vmx.h with the kernel · 675f52b2
      Arnaldo Carvalho de Melo 提交于
      To pick the changes from:
      
        1b07304c ("KVM: nVMX: support descriptor table exits")
      
      That adds entries to VMX_EXIT_REASONS, that is used by
      tools/perf/arch/x86/util/kvm-stat.c.
      
      This also picks the changes in:
      
        1dc35dac ("KVM: nVMX: check host CR3 on vmentry and vmexit")
      
      But these are not used in 'perf kvm stat', do it just to silence the
      kernel/tools file cache coherency detector:
      
        $ make -C tools/perf
        make: Entering directory '/home/acme/git/linux/tools/perf'
          BUILD:   Doing 'make -j4' parallel build
        Warning: arch/x86/include/uapi/asm/vmx.h differs from kernel
      
      Cc: Adrian Hunter <adrian.hunter@intel.com>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Ladi Prosek <lprosek@redhat.com>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Wang Nan <wangnan0@huawei.com>
      Link: http://lkml.kernel.org/n/tip-56uowkk8t5zje49a42asffcy@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      675f52b2
  29. 19 10月, 2016 1 次提交
    • P
      x86/cpufeature: Add AVX512_4VNNIW and AVX512_4FMAPS features · 82148993
      Piotr Luc 提交于
      AVX512_4VNNIW  - Vector instructions for deep learning enhanced word
      variable precision.
      AVX512_4FMAPS - Vector instructions for deep learning floating-point
      single precision.
      
      These new instructions are to be used in future Intel Xeon & Xeon Phi
      processors. The bits 2&3 of CPUID[level:0x07, EDX] inform that new
      instructions are supported by a processor.
      
      The spec can be found in the Intel Software Developer Manual (SDM) or in
      the Instruction Set Extensions Programming Reference (ISE).
      
      Define new feature flags to enumerate the new instructions in /proc/cpuinfo
      accordingly to CPUID bits and add the required xsave extensions which are
      required for proper operation.
      Signed-off-by: NPiotr Luc <piotr.luc@intel.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Dave Hansen <dave.hansen@intel.com>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Link: http://lkml.kernel.org/r/20161018150111.29926-1-piotr.luc@intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      82148993
  30. 18 10月, 2016 1 次提交
  31. 06 10月, 2016 1 次提交