- 28 8月, 2015 1 次提交
-
-
由 Christoph Hellwig 提交于
Three architectures already define these, and we'll need them genericly soon. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 24 8月, 2015 1 次提交
-
-
由 Ard Biesheuvel 提交于
The linear region size of a 39-bit VA kernel is only 256 GB, which may be insufficient to cover all of system RAM, even on platforms that have much less than 256 GB of memory but which is laid out very sparsely. So make sure we clip the memory we will not be able to map before installing it into the memblock memory table, by setting MAX_MEMBLOCK_ADDR accordingly. Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Tested-by: NStuart Yoder <stuart.yoder@freescale.com> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
- 23 1月, 2015 1 次提交
-
-
由 Mark Rutland 提交于
PCI IO space was intended to be 16MiB, at 32MiB below MODULES_VADDR, but commit d1e6dc91 ("arm64: Add architectural support for PCI") extended this to cover the full 32MiB. The final 8KiB of this 32MiB is also allocated for the fixmap, allowing for potential clashes between the two. This change was masked by assumptions in mem_init and the page table dumping code, which assumed the I/O space to be 16MiB long through seaparte hard-coded definitions. This patch changes the definition of the PCI I/O space allocation to live in asm/memory.h, along with the other VA space allocations. As the fixmap allocation depends on the number of fixmap entries, this is moved below the PCI I/O space allocation. Both the fixmap and PCI I/O space are guarded with 2MB of padding. Sites assuming the I/O space was 16MiB are moved over use new PCI_IO_{START,END} definitions, which will keep in sync with the size of the IO space (now restored to 16MiB). As a useful side effect, the use of the new PCI_IO_{START,END} definitions prevents a build issue in the dumping code due to a (now redundant) missing include of io.h for PCI_IOBASE. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Will Deacon <will.deacon@arm.com> [catalin.marinas@arm.com: reorder FIXADDR and PCI_IO address_markers_idx enum] Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 13 11月, 2014 1 次提交
-
-
由 Neil Zhang 提交于
pfns are unsigned long, but PHYS_PFN_OFFSET is phys_addr_t. This leads to page_to_pfn() returning phys_addr_t which cause type mismatches in some print statements. Signed-off-by: NNeil Zhang <zhangwm@marvell.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 10 11月, 2014 1 次提交
-
-
由 Thierry Reding 提交于
Include the generic I/O header file so that duplicate implementations can be removed. This will also help to establish consistency across more architectures regarding which accessors they support. Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NThierry Reding <treding@nvidia.com>
-
- 23 7月, 2014 1 次提交
-
-
由 Jungseok Lee 提交于
This patch adds virtual address space size and a level of translation tables to kernel configuration. It facilicates introduction of different MMU options, such as 4KB + 4 levels, 16KB + 4 levels and 64KB + 3 levels, easily. The idea is based on the discussion with Catalin Marinas: http://www.spinics.net/linux/lists/arm-kernel/msg319552.htmlSigned-off-by: NJungseok Lee <jays.lee@samsung.com> Reviewed-by: NSungjinn Chung <sungjinn.chung@samsung.com> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Tested-by: NJungseok Lee <jungseoklee85@gmail.com>
-
- 09 7月, 2014 1 次提交
-
-
由 Colin Cross 提交于
include/linux/sched.h implements TASK_SIZE_OF as TASK_SIZE if it is not set by the architecture headers. TASK_SIZE uses the current task to determine the size of the virtual address space. On a 64-bit kernel this will cause reading /proc/pid/pagemap of a 64-bit process from a 32-bit process to return EOF when it reads past 0xffffffff. Implement TASK_SIZE_OF exactly the same as TASK_SIZE with test_tsk_thread_flag instead of test_thread_flag. Cc: stable@vger.kernel.org Signed-off-by: NColin Cross <ccross@android.com> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 12 5月, 2014 1 次提交
-
-
由 Stefano Stabellini 提交于
virt_to_pfn has been defined in arch/arm/include/asm/memory.h by commit e26a9e00 "ARM: Better virt_to_page() handling" and Xen has come to rely on it. Introduce virt_to_pfn on arm64 too. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 08 5月, 2014 1 次提交
-
-
由 Stefano Stabellini 提交于
virt_to_pfn has been defined in arch/arm/include/asm/memory.h by commit e26a9e00 "ARM: Better virt_to_page() handling" and Xen has come to rely on it. Introduce virt_to_pfn on arm64 too. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 08 4月, 2014 1 次提交
-
-
由 Mark Salter 提交于
Add support for early IO or memory mappings which are needed before the normal ioremap() is usable. This also adds fixmap support for permanent fixed mappings such as that used by the earlyprintk device register region. Signed-off-by: NMark Salter <msalter@redhat.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 12月, 2013 1 次提交
-
-
由 Laura Abbott 提交于
The definition of virt_addr_valid is that virt_addr_valid should return true if and only if virt_to_page returns a valid pointer. The current definition of virt_addr_valid only checks against the virtual address range. There's no guarantee that just because a virtual address falls bewteen PAGE_OFFSET and high_memory the associated physical memory has a valid backing struct page. Follow the example of other architectures and convert to pfn_valid to verify that the virtual address is actually valid. Cc: Will Deacon <will.deacon@arm.com> Cc: Nicolas Pitre <nico@linaro.org> Signed-off-by: NLaura Abbott <lauraa@codeaurora.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 06 11月, 2013 1 次提交
-
-
由 Catalin Marinas 提交于
This patch expands the VA_BITS to 42 when the 64K page configuration is enabled allowing 2TB kernel linear mapping. Linux still uses 2 levels of page tables in this configuration with pgd now being a full page. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NWill Deacon <will.deacon@arm.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
-
- 07 6月, 2013 1 次提交
-
-
由 Marc Zyngier 提交于
Add HYP and S2 page flags, for both normal and device memory. Reviewed-by: NChristopher Covington <cov@codeaurora.org> Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
- 23 1月, 2013 1 次提交
-
-
由 Catalin Marinas 提交于
This patch adds support for "earlyprintk=" parameter on the kernel command line. The format is: earlyprintk=<name>[,<addr>][,<options>] where <name> is the name of the (UART) device, e.g. "pl011", <addr> is the I/O address. The <options> aren't currently used. The mapping of the earlyprintk device is done very early during kernel boot and there are restrictions on which functions it can call. A special early_io_map() function is added which creates the mapping from the pre-defined EARLY_IOBASE to the device I/O address passed via the kernel parameter. The pgd entry corresponding to EARLY_IOBASE is pre-populated in head.S during kernel boot. Only PL011 is currently supported and it is assumed that the interface is already initialised by the boot loader before the kernel is started. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 17 9月, 2012 1 次提交
-
-
由 Catalin Marinas 提交于
The virtual memory layout is described in Documentation/arm64/memory.txt. This patch adds the MMU definitions for the 4KB and 64KB translation table configurations. The SECTION_SIZE is 2MB with 4KB page and 512MB with 64KB page configuration. PHYS_OFFSET is calculated at run-time and stored in a variable (no run-time code patching at this stage). On the current implementation, both user and kernel address spaces are 512G (39-bit) each with a maximum of 256G for the RAM linear mapping. Linux uses 3 levels of translation tables with the 4K page configuration and 2 levels with the 64K configuration. Extending the memory space beyond 39-bit with the 4K pages or 42-bit with 64K pages requires an additional level of translation tables. The SPARSEMEM configuration is global to all AArch64 platforms and allows for 1GB sections with SPARSEMEM_VMEMMAP enabled by default. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-