- 12 5月, 2015 9 次提交
-
-
由 Joachim Eastwood 提交于
Both pconf_get_pin and pconf_set_pin needs to lookup pin cap based on the pin number. Create a common helper function that both functions can use that also handles the case where no pin number is found in the pins array. This also fixes a small bug in pconf_get_pin where pconf_get_i2c0 would use the pins array index rather than the pin number. Signed-off-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Geert Uytterhoeven 提交于
As of commit 9d07d414 ("ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform"), r8a73a4 is only supported in generic ARM multi-platform builds. Hence CONFIG_ARCH_MULTIPLATFORM is always set, and the check can be removed. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Ulrich Hecht 提交于
Also renames "R-Car M2" to "R-Car M2-W" to avoid confusion. Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: NSimon Horman <horms+renesas@verge.net.au> Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: devicetree@vger.kernel.org Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Ulrich Hecht 提交于
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Ulrich Hecht 提交于
Regarding pin control, r8a7791 and r8a7793 are identical, so it is sufficient to add an sh_pfc_soc_info structure to enable r8a7793 support. Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Geert Uytterhoeven 提交于
The last serial port is called "SCIFB", not "SCIFAB". Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Mika Westerberg 提交于
Intel Sunrisepoint-H is a desktop version of the PCH (Platform Controller Hub). It has slightly different pin configuration compared to the LP version. This patch adds support for Sunrisepoint-H to the existing pinctrl-sunrisepoint.c driver. Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Geert Uytterhoeven 提交于
As of commit 9d07d414 ("ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform"), r8a73a4 is only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 06 5月, 2015 14 次提交
-
-
由 Fabian Frederick 提交于
Inspired by scripts/coccinelle/api/err_cast.cocci Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Krzysztof Kozlowski 提交于
The irq_domain_ops are not modified by the driver and the irqdomain core code accepts pointer to a const data. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Krzysztof Kozlowski 提交于
The irq_domain_ops are not modified by the driver and the irqdomain core code accepts pointer to a const data. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Markus Pargmann 提交于
The old format to define pinctrl settings for imx in DT has two hierarchy levels. The first level are function device nodes. The second level are pingroups which contain a property fsl,pins. The original intention was to define all pin functions in a single dtsi file and just reference the correct ones in the board files. This idea was rejected some time ago leading to the current design to have all the pinfunctions defined in the board files. So we don't need the function device nodes anymore. This patch changes the pinctrl driver to accept devicetrees which do not have the first hierarchy level, function device nodes. For example karo-tx25 already has such a devicetree. Old devicetrees are still parsed and supported. Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Helmut Buchsbaum 提交于
Since SCLK, MISO and MOSI are the only mandatory signals at Zynq's SPI interfaces, SS0, SS1 and SS2 have to be configured separately as they may be used as simple GPIO lines. This, of course, has to be considered in the devicetree, so pin controller configuration for e.g. an SPI0 using SS0 and SS1 only might look like the following snippet (derived from the example of chapter "17.5.3 MIO/EMIO" Routing of Zynq-7000 TRM UG585). So MIO20 can now be used as GPIO instead of being occupied by SPI0 SS2 function. Note the separate pinmux function for the slave select signals: pinctrl_spi0_default: spi0-default { mux_spi { function = "spi0"; groups = "spi0_0_grp"; }; mux_ss { function = "spi0_ss"; groups = "spi0_0_ss0_grp", "spi0_0_ss1_grp"; } conf-output { pins = "MIO16", "MIO21"; slew-rate = <0>; bias-disable; low-power-disable; io-standard = <1>; }; conf-input { pins = "MIO17"; slew-rate = <0>; bias-high-impedance; low-power-disable; io-standard = <1>; }; conf-select { pins = "MIO18", "MIO19"; slew-rate = <0>; bias-pull-up; low-power-disable; io-standard = <1>; }; }; pinctrl_gpio0_default { mux { function = "gpio0"; groups = "gpio0_20_grp" }; conf { pins = "MIO20"; slew-rate = <0>; bias-pull-up; low-power-disable; io-standard = <1>; }; }; Signed-off-by: NHelmut Buchsbaum <helmut.buchsbaum@gmail.com> Acked-by: NSören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Linus Walleij 提交于
Assign GPIO chip and irqchip to the GPIO container dynamically, so we can set a unique name for each GPIO irqchip and see what chip the hwirq offset actually relates to. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Linus Walleij 提交于
This activates strict mode muxing for the Nomadik pin controllers, as these do not allow GPIO and functions to use the same pin simultaneously. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Linus Walleij 提交于
While the pinmux_ops are ideally just a vtable for pin mux calls, the "strict" setting belongs so intuitively with the pin multiplexing that we should move it here anyway. Putting it in the top pinctrl_desc makes no sense. Cc: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Sonic Zhang 提交于
Disallow simultaneous use of the the GPIO and peripheral mux functions by setting a flag "strict" in struct pinctrl_desc. The blackfin pinmux and gpio controller doesn't allow user to set up a pin for both GPIO and peripheral function. So, add flag strict in struct pinctrl_desc to check both gpio_owner and mux_owner before approving the pin request. v2-changes: - if strict flag is set, check gpio_owner and mux_onwer in if and else clause v3-changes: - add kerneldoc for this struct - augment Documentation/pinctrl.txt Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Frank Li 提交于
Add i.MX7D pinctrl driver support Signed-off-by: NFrank Li <Frank.Li@freescale.com> Signed-off-by: NAnson Huang <b20788@freescale.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Andrew Bresticker 提交于
Add a device-tree binding document for the pin controller present on the IMG Pistachio SoC. Signed-off-by: NDamien Horsley <Damien.Horsley@imgtec.com> Signed-off-by: NEzequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Joachim Eastwood 提交于
Signed-off-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Joachim Eastwood 提交于
Pinctrl driver for the System Control Unit (SCU) found on NXP LPC18xx/43xx devices. Driver uses the generic pinctrl DT bindings for multiplexing and property settings. Signed-off-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Alexander Stein 提交于
This adds the callback for set_multiple. As this controller has a separate set and clear register, we can't write directly to PIO_ODSR as this would required a cached variable and would race with at91_gpio_set. So build masks for the PIO_SODR and PIO_CODR registers and write them together. Signed-off-by: NAlexander Stein <alexanders83@web.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 04 5月, 2015 8 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 fixes from Ted Ts'o: "Some miscellaneous bug fixes and some final on-disk and ABI changes for ext4 encryption which provide better security and performance" * tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix growing of tiny filesystems ext4: move check under lock scope to close a race. ext4: fix data corruption caused by unwritten and delayed extents ext4 crypto: remove duplicated encryption mode definitions ext4 crypto: do not select from EXT4_FS_ENCRYPTION ext4 crypto: add padding to filenames before encrypting ext4 crypto: simplify and speed up filename encryption
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "One intel fix, one rockchip fix, and a bunch of radeon fixes for some regressions from audio rework and vm stability" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915/chv: Implement WaDisableShadowRegForCpd drm/radeon: fix userptr return value checking (v2) drm/radeon: check new address before removing old one drm/radeon: reset BOs address after clearing it. drm/radeon: fix lockup when BOs aren't part of the VM on release drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5 drm/radeon: adjust pll when audio is not enabled drm/radeon: only enable audio streams if the monitor supports it drm/radeon: only mark audio as connected if the monitor supports it (v3) drm/radeon/audio: don't enable packets until the end drm/radeon: drop dce6_dp_enable drm/radeon: fix ordering of AVI packet setup drm/radeon: Use drm_calloc_ab for CS relocs drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
Just a single intel fix * tag 'drm-intel-fixes-2015-04-30' of git://anongit.freedesktop.org/drm-intel: drm/i915/chv: Implement WaDisableShadowRegForCpd
-
https://github.com/markyzq/kernel-drm-rockchip由 Dave Airlie 提交于
one fix and maintainers update * 'drm-next0420' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is three logical fixes (as 5 patches). The 3ware class of drivers were causing an oops with multiqueue by tearing down the command mappings after completing the command (where the variables in the command used to tear down the mapping were no-longer valid). There's also a fix for the qnap iscsi target which was choking on us sending it commands that were too long and a fix for the reworked aha1542 allocating GFP_KERNEL under a lock" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: 3w-9xxx: fix command completion race 3w-xxxx: fix command completion race 3w-sas: fix command completion race aha1542: Allocate memory before taking a lock SCSI: add 1024 max sectors black list flag
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave dmaengine fixes from Vinod Koul: "Here are the fixes in dmaengine subsystem for rc2: - privatecnt fix for slave dma request API by Christopher - warn fix for PM ifdef in usb-dmac by Geert - fix hardware dependency for xgene by Jean" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: increment privatecnt when using dma_get_any_slave_channel dmaengine: xgene: Set hardware dependency dmaengine: usb-dmac: Protect PM-only functions to kill warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: - build fix for SMP=n in book3s_xics.c - fix for Daniel's pci_controller_ops on powernv. - revert the TM syscall abort patch for now. - CPU affinity fix from Nathan. - two EEH fixes from Gavin. - fix for CR corruption from Sam. - selftest build fix. * tag 'powerpc-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Restore non-volatile CRs after nap powerpc/eeh: Delay probing EEH device during hotplug powerpc/eeh: Fix race condition in pcibios_set_pcie_reset_state() powerpc/pseries: Correct cpu affinity for dlpar added cpus selftests/powerpc: Fix the pmu install rule Revert "powerpc/tm: Abort syscalls in active transactions" powerpc/powernv: Fix early pci_controller_ops loading. powerpc/kvm: Fix SMP=n build error in book3s_xics.c
-
- 03 5月, 2015 3 次提交
-
-
由 Jan Kara 提交于
The estimate of necessary transaction credits in ext4_flex_group_add() is too pessimistic. It reserves credit for sb, resize inode, and resize inode dindirect block for each group added in a flex group although they are always the same block and thus it is enough to account them only once. Also the number of modified GDT block is overestimated since we fit EXT4_DESC_PER_BLOCK(sb) descriptors in one block. Make the estimation more precise. That reduces number of requested credits enough that we can grow 20 MB filesystem (which has 1 MB journal, 79 reserved GDT blocks, and flex group size 16 by default). Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Reviewed-by: NEric Sandeen <sandeen@redhat.com>
-
由 Davide Italiano 提交于
fallocate() checks that the file is extent-based and returns EOPNOTSUPP in case is not. Other tasks can convert from and to indirect and extent so it's safe to check only after grabbing the inode mutex. Signed-off-by: NDavide Italiano <dccitaliano@gmail.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Lukas Czerner 提交于
Currently it is possible to lose whole file system block worth of data when we hit the specific interaction with unwritten and delayed extents in status extent tree. The problem is that when we insert delayed extent into extent status tree the only way to get rid of it is when we write out delayed buffer. However there is a limitation in the extent status tree implementation so that when inserting unwritten extent should there be even a single delayed block the whole unwritten extent would be marked as delayed. At this point, there is no way to get rid of the delayed extents, because there are no delayed buffers to write out. So when a we write into said unwritten extent we will convert it to written, but it still remains delayed. When we try to write into that block later ext4_da_map_blocks() will set the buffer new and delayed and map it to invalid block which causes the rest of the block to be zeroed loosing already written data. For now we can fix this by simply not allowing to set delayed status on written extent in the extent status tree. Also add WARN_ON() to make sure that we notice if this happens in the future. This problem can be easily reproduced by running the following xfs_io. xfs_io -f -c "pwrite -S 0xaa 4096 2048" \ -c "falloc 0 131072" \ -c "pwrite -S 0xbb 65536 2048" \ -c "fsync" /mnt/test/fff echo 3 > /proc/sys/vm/drop_caches xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff This can be theoretically also reproduced by at random by running fsx, but it's not very reliable, though on machines with bigger page size (like ppc) this can be seen more often (especially xfstest generic/127) Signed-off-by: NLukas Czerner <lczerner@redhat.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 02 5月, 2015 6 次提交
-
-
由 Chanho Park 提交于
This patch removes duplicated encryption modes which were already in ext4.h. They were duplicated from commit 3edc18d8 and commit f542fb. Cc: Theodore Ts'o <tytso@mit.edu> Cc: Michael Halcrow <mhalcrow@google.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: NChanho Park <chanho61.park@samsung.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Herbert Xu 提交于
This patch adds a tristate EXT4_ENCRYPTION to do the selections for EXT4_FS_ENCRYPTION because selecting from a bool causes all the selected options to be built-in, even if EXT4 itself is a module. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Receive packet length needs to be adjust by 2 on RX to accomodate the two padding bytes in altera_tse driver. From Vlastimil Setka. 2) If rx frame is dropped due to out of memory in macb driver, we leave the receive ring descriptors in an undefined state. From Punnaiah Choudary Kalluri 3) Some netlink subsystems erroneously signal NLM_F_MULTI. That is only for dumps. Fix from Nicolas Dichtel. 4) Fix mis-use of raw rt->rt_pmtu value in ipv4, one must always go via the ipv4_mtu() helper. From Herbert Xu. 5) Fix null deref in bridge netfilter, and miscalculated lengths in jump/goto nf_tables verdicts. From Florian Westphal. 6) Unhash ping sockets properly. 7) Software implementation of BPF divide did 64/32 rather than 64/64 bit divide. The JITs got it right. Fix from Alexei Starovoitov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits) ipv4: Missing sk_nulls_node_init() in ping_unhash(). net: fec: Fix RGMII-ID mode net/mlx4_en: Schedule napi when RX buffers allocation fails netxen_nic: use spin_[un]lock_bh around tx_clean_lock net/mlx4_core: Fix unaligned accesses mlx4_en: Use correct loop cursor in error path. cxgb4: Fix MC1 memory offset calculation bnx2x: Delay during kdump load net: Fix Kernel Panic in bonding driver debugfs file: rlb_hash_table net: dsa: Fix scope of eeprom-length property net: macb: Fix race condition in driver when Rx frame is dropped hv_netvsc: Fix a bug in netvsc_start_xmit() altera_tse: Correct rx packet length mlx4: Fix tx ring affinity_mask creation tipc: fix problem with parallel link synchronization mechanism tipc: remove wrong use of NLM_F_MULTI bridge/nl: remove wrong use of NLM_F_MULTI bridge/mdb: remove wrong use of NLM_F_MULTI net: sched: act_connmark: don't zap skb->nfct trivial: net: systemport: bcmsysport.h: fix 0x0x prefix ...
-
由 Stefan Hajnoczi 提交于
Here the "other side" refers to the guest or host. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
With my job change kernel work will be "own time"; I'm keeping lguest and modules (and the virtio standards work), but virtio kernel has to go. This makes it clear that Michael is in charge. He's good, but having me watch over his shoulder won't help. Good luck Michael! Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull Ceph RBD fix from Sage Weil. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: end I/O the entire obj_request on error
-