- 30 8月, 2017 2 次提交
-
-
由 Christoph Hellwig 提交于
The NVMe 1.3 specification says in section 5.21.1.13: "After a successful completion of a Set Features enabling the host memory buffer, the host shall not write to the associated host memory region, buffer size, or descriptor list until the host memory buffer has been disabled." While this doesn't state that the descriptor list must remain accessible to the device it certainly implies it must remaing readable by the device. So switch to a dma coherent allocation for the descriptor list just to be safe - it's not like the cost for it matters compared to the actual memory buffers. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NKeith Busch <keith.busch@intel.com> Reviewed-by: NSagi Grimberg <sagi@grimberg.me> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Fixes: 87ad72a5 ("nvme-pci: implement host memory buffer support")
-
由 Max Gurtovoy 提交于
Due to various page sizes in the system (IOMMU/device/kernel), we set the fabrics controller page size to 4k and block layer boundaries accordinglly. In architectures that uses different kernel page size we'll have a mismatch to the MR page size that may cause a mapping error. Update the MR page size to correspond to the core ctrl settings. Signed-off-by: NMax Gurtovoy <maxg@mellanox.com> Reviewed-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 18 8月, 2017 2 次提交
-
-
由 Keith Busch 提交于
Fixes: 920d13a8 ("nvme-pci: factor out the cqe reading mechanics from __nvme_process_cq") Reported-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NKeith Busch <keith.busch@intel.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
Only print the specified options that are not recognized, instead of the whole list of options. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
-
- 17 8月, 2017 1 次提交
-
-
由 James Smart 提交于
There were 2 statics introduced that were bogus. Removed the static designations. Signed-off-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 16 8月, 2017 2 次提交
-
-
由 James Smart 提交于
Use list_for_each_entry_safe to prevent list handling from referencing next pointers directly after list_del's Signed-off-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Martin Wilck 提交于
The merged version of my patch "nvmet: don't report 0-bytes in serial number" fails to remove two lines which should have been replaced, so that the space-padded strings are overwritten again with 0-bytes. Fix it. Fixes: 42de82a8 nvmet: don't report 0-bytes in serial number Signed-off-by: NMartin Wilck <mwilck@suse.com> Reviewed-by: NSagi Grimberg <sagi@grimbeg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 11 8月, 2017 2 次提交
-
-
由 Kwan (Hingkwan) Huen-SSI 提交于
The numd field of directive receive command takes number of dwords to transfer. This fix has the correct calculation for numd. Signed-off-by: NKwan (Hingkwan) Huen-SSI <kwan.huen@samsung.com> Reviewed-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Keith Busch 提交于
We need to return an error if a timeout occurs on any NVMe command during initialization. Without this, the nvme reset work will be stuck. A timeout will have a negative error code, meaning we need to stop initializing the controller. All postitive returns mean the controller is still usable. bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196325Signed-off-by: NKeith Busch <keith.busch@intel.com> Cc: Martin Peres <martin.peres@intel.com> [jth consolidated cleanup path ] Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 10 8月, 2017 4 次提交
-
-
由 Max Gurtovoy 提交于
Currently we create the sysfs entry even if we fail mapping it. In that case, the unmapping will not remove the sysfs created file. There is no good reason to create a sysfs entry for a non working CMB and show his characteristics. Fixes: f63572df ("nvme: unmap CMB and remove sysfs file in reset path") Signed-off-by: NMax Gurtovoy <maxg@mellanox.com> Reviewed-by: NStephen Bates <sbates@raithlin.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 James Smart 提交于
Currently, calls to nvmet_fc_rcv_fcp_req() always copied the FC-NVME cmd iu to a temporary buffer before returning, allowing the driver to immediately repost the buffer to the hardware. To address timing conditions on queue element structures vs async command reception, the nvmet_fc transport occasionally may need to hold on to the command iu buffer for a short period. In these cases, the nvmet_fc_rcv_fcp_req() will return a special return code (-EOVERFLOW). In these cases, the LLDD must delay until the new defer_rcv lldd callback is called before recycling the buffer back to the hw. This patch adds support for the new nvmet_fc transport defer_rcv callback and recognition of the new error code when passing commands to the transport. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 James Smart 提交于
At queue creation, the transport allocates a local job struct (struct nvmet_fc_fcp_iod) for each possible element of the queue. When a new CMD is received from the wire, a jobs struct is allocated from the queue and then used for the duration of the command. The job struct contains buffer space for the wire command iu. Thus, upon allocation of the job struct, the cmd iu buffer is copied to the job struct and the LLDD may immediately free/reuse the CMD IU buffer passed in the call. However, in some circumstances, due to the packetized nature of FC and the api of the FC LLDD which may issue a hw command to send the wire response, but the LLDD may not get the hw completion for the command and upcall the nvmet_fc layer before a new command may be asynchronously received on the wire. In other words, its possible for the initiator to get the response from the wire, thus believe a command slot free, and send a new command iu. The new command iu may be received by the LLDD and passed to the transport before the LLDD had serviced the hw completion and made the teardown calls for the original job struct. As such, there is no available job struct available for the new io. E.g. it appears like the host sent more queue elements than the queue size. It didn't based on it's understanding. Rather than treat this as a hard connection failure queue the new request until the job struct does free up. As the buffer isn't copied as there's no job struct, a special return value must be returned to the LLDD to signify to hold off on recycling the cmd iu buffer. And later, when a job struct is allocated and the buffer copied, a new LLDD callback is introduced to notify the LLDD and allow it to recycle it's command iu buffer. Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Martin Wilck 提交于
Some broken controllers (such as earlier Linux targets) pad model or serial fields with 0-bytes rather than spaces. The NVMe spec disallows 0 bytes in "ASCII" fields. Thus strip trailing 0-bytes, too. Also make sure that we get no underflow for pathological input. Signed-off-by: NMartin Wilck <mwilck@suse.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NKeith Busch <keith.busch@intel.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 26 7月, 2017 3 次提交
-
-
由 Scott Bauer 提交于
With a misbehaving controller it's possible we'll never enter the live state and create an admin queue. When we fail out of reset work it's possible we failed out early enough without setting up the admin queue. We tear down queues after a failed reset, but needed to do some more sanitization. Fixes 443bd90f: "nvme: host: unquiesce queue in nvme_kill_queues()" [ 189.650995] nvme nvme1: pci function 0000:0b:00.0 [ 317.680055] nvme nvme0: Device not ready; aborting reset [ 317.680183] nvme nvme0: Removing after probe failure status: -19 [ 317.681258] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 317.681397] general protection fault: 0000 [#1] SMP KASAN [ 317.682984] CPU: 3 PID: 477 Comm: kworker/3:2 Not tainted 4.13.0-rc1+ #5 [ 317.683112] Hardware name: Gigabyte Technology Co., Ltd. Z170X-UD5/Z170X-UD5-CF, BIOS F5 03/07/2016 [ 317.683284] Workqueue: events nvme_remove_dead_ctrl_work [nvme] [ 317.683398] task: ffff8803b0990000 task.stack: ffff8803c2ef0000 [ 317.683516] RIP: 0010:blk_mq_unquiesce_queue+0x2b/0xa0 [ 317.683614] RSP: 0018:ffff8803c2ef7d40 EFLAGS: 00010282 [ 317.683716] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 1ffff1006fbdcde3 [ 317.683847] RDX: 0000000000000038 RSI: 1ffff1006f5a9245 RDI: 0000000000000000 [ 317.683978] RBP: ffff8803c2ef7d58 R08: 1ffff1007bcdc974 R09: 0000000000000000 [ 317.684108] R10: 1ffff1007bcdc975 R11: 0000000000000000 R12: 00000000000001c0 [ 317.684239] R13: ffff88037ad49228 R14: ffff88037ad492d0 R15: ffff88037ad492e0 [ 317.684371] FS: 0000000000000000(0000) GS:ffff8803de6c0000(0000) knlGS:0000000000000000 [ 317.684519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 317.684627] CR2: 0000002d1860c000 CR3: 000000045b40d000 CR4: 00000000003406e0 [ 317.684758] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 317.684888] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 317.685018] Call Trace: [ 317.685084] nvme_kill_queues+0x4d/0x170 [nvme_core] [ 317.685185] nvme_remove_dead_ctrl_work+0x3a/0x90 [nvme] [ 317.685289] process_one_work+0x771/0x1170 [ 317.685372] worker_thread+0xde/0x11e0 [ 317.685452] ? pci_mmcfg_check_reserved+0x110/0x110 [ 317.685550] kthread+0x2d3/0x3d0 [ 317.685617] ? process_one_work+0x1170/0x1170 [ 317.685704] ? kthread_create_on_node+0xc0/0xc0 [ 317.685785] ret_from_fork+0x25/0x30 [ 317.685798] Code: 0f 1f 44 00 00 55 48 b8 00 00 00 00 00 fc ff df 48 89 e5 41 54 4c 8d a7 c0 01 00 00 53 48 89 fb 4c 89 e2 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 75 50 48 8b bb c0 01 00 00 e8 33 8a f9 00 0f ba b3 [ 317.685872] RIP: blk_mq_unquiesce_queue+0x2b/0xa0 RSP: ffff8803c2ef7d40 [ 317.685908] ---[ end trace a3f8704150b1e8b4 ]--- Signed-off-by: NScott Bauer <scott.bauer@intel.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
It's possible the preferred HMB size may not be a multiple of the chunk_size. This patch moves len to function scope and uses that in the for loop increment so the last iteration doesn't cause the total size to exceed the allocated HMB size. Based on an earlier patch from Keith Busch. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NKeith Busch <keith.busch@intel.com> Fixes: 87ad72a5 ("nvme-pci: implement host memory buffer support")
-
由 James Smart 提交于
The FC-NVME spec hasn't locked down on the format string for TRADDR. Currently the spec is lobbying for "nn-<16hexdigits>:pn-<16hexdigits>" where the wwn's are hex values but not prefixed by 0x. Most implementations so far expect a string format of "nn-0x<16hexdigits>:pn-0x<16hexdigits>" to be used. The transport uses the match_u64 parser which requires a leading 0x prefix to set the base properly. If it's not there, a match will either fail or return a base 10 value. The resolution in T11 is pushing out. Therefore, to fix things now and to cover any eventuality and any implementations already in the field, this patch adds support for both formats. The change consists of replacing the token matching routine with a routine that validates the fixed string format, and then builds a local copy of the hex name with a 0x prefix before calling the system parser. Note: the same parser routine exists in both the initiator and target transports. Given this is about the only "shared" item, we chose to replicate rather than create an interdendency on some shared code. Signed-off-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 25 7月, 2017 4 次提交
-
-
由 James Smart 提交于
There are cases where threads are in the process of submitting new io when the LLDD calls in to remove the remote port. In some cases, the next io actually goes to the LLDD, who knows the remoteport isn't present and rejects it. To properly recovery/restart these i/o's we don't want to hard fail them, we want to treat them as temporary resource errors in which a delayed retry will work. Add a couple more checks on remoteport connectivity and commonize the busy response handling when it's seen. Signed-off-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Jon Derrick 提交于
Fabrics commands with opcode 0x7F use the fctype field to indicate data direction. Signed-off-by: NJon Derrick <jonathan.derrick@intel.com> Reviewed-by: NSagi Grimberg <sai@grmberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de> Fixes: eb793e2c ("nvme.h: add NVMe over Fabrics definitions")
-
由 Johannes Thumshirn 提交于
The WWID sysfs attribute can provide multiple means of a World Wide ID for a NVMe device. It can either be a NGUID, a EUI-64 or a concatenation of VID, Serial Number, Model and the Namespace ID in this order of preference. If the target also sends us a UUID use the UUID for identification and give it the highest priority. This eases generation of /dev/disk/by-* symlinks. Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
We already do this for PCI mappings, and the higher level code now expects that CPU on/offlining doesn't have an affect on the queue mappings. Signed-off-by: NChristoph Hellwig <hch@lst.de> Tested-by: NMax Gurtovoy <maxg@mellanox.com> Reviewed-by: NMax Gurtovoy <maxg@mellanox.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 24 7月, 2017 2 次提交
-
-
由 Christoph Hellwig 提交于
The blk-mq code lacks support for looking at the rpm_status field, tracking active requests and the RQF_PM flag. Due to the default switch to blk-mq for scsi people start to run into suspend / resume issue due to this fact, so make sure we disable the runtime PM functionality until it is properly implemented. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMing Lei <ming.lei@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Bart Van Assche 提交于
This patch fixes the following sparse warnings: drivers/block/xen-blkfront.c:916:45: warning: incorrect type in argument 2 (different base types) drivers/block/xen-blkfront.c:916:45: expected restricted blk_status_t [usertype] error drivers/block/xen-blkfront.c:916:45: got int [signed] error drivers/block/xen-blkfront.c:1599:47: warning: incorrect type in assignment (different base types) drivers/block/xen-blkfront.c:1599:47: expected int [signed] error drivers/block/xen-blkfront.c:1599:47: got restricted blk_status_t [usertype] <noident> drivers/block/xen-blkfront.c:1607:55: warning: incorrect type in assignment (different base types) drivers/block/xen-blkfront.c:1607:55: expected int [signed] error drivers/block/xen-blkfront.c:1607:55: got restricted blk_status_t [usertype] <noident> drivers/block/xen-blkfront.c:1625:55: warning: incorrect type in assignment (different base types) drivers/block/xen-blkfront.c:1625:55: expected int [signed] error drivers/block/xen-blkfront.c:1625:55: got restricted blk_status_t [usertype] <noident> drivers/block/xen-blkfront.c:1628:62: warning: restricted blk_status_t degrades to integer Compile-tested only. Fixes: commit 2a842aca ("block: introduce new block status code type") Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: <xen-devel@lists.xenproject.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 23 7月, 2017 3 次提交
-
-
由 Josef Bacik 提交于
A user reported that he was getting immediate disconnects with my sndtimeo patch applied. This is because by default the OSS nbd client doesn't set a timeout, so we end up setting the sndtimeo to 0, which of course means we have send errors a lot. Instead only set our sndtimeo if the user specified a timeout, otherwise we'll just wait forever like we did previously. Fixes: dc88e34d ("nbd: set sk->sk_sndtimeo for our sockets") Reported-by: NAdam Borowski <kilobyte@angband.pl> Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Josef Bacik 提交于
We need to take the tx_lock so we don't interleave our disconnect request between real data going down the wire. Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Josef Bacik 提交于
There's no reason to limit ourselves to one disconnect message per socket. Sometimes networks do strange things, might as well let sysadmins hit the panic button as much as they want. Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 22 7月, 2017 15 次提交
-
-
由 Randy Dunlap 提交于
Fix major alphabetic errors. No attempt to fix items that all begin with the same word (like ARM, BROADCOM, DRM, EDAC, FREESCALE, INTEL, OMAP, PCI, SAMSUNG, TI, USB, etc.). (diffstat +/- is different by one line because TI KEYSTONE MULTICORE had 2 blank lines after it.) Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Acked-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/anna/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Anna Schumaker: "Stable bugfix: - Fix error reporting regression Bugfixes: - Fix setting filelayout ds address race - Fix subtle access bug when using ACLs - Fix setting mnt3_counts array size - Fix a couple of pNFS commit races" * tag 'nfs-for-4.13-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS/filelayout: Fix racy setting of fl->dsaddr in filelayout_check_deviceid() NFS: Be more careful about mapping file permissions NFS: Store the raw NFS access mask in the inode's access cache NFSv3: Convert nfs3_proc_access() to use nfs_access_set_mask() NFS: Refactor NFS access to kernel access mask calculation net/sunrpc/xprt_sock: fix regression in connection error reporting. nfs: count correct array for mnt3_counts array size Revert commit 722f0b89 ("pNFS: Don't send COMMITs to the DSes if...") pNFS/flexfiles: Handle expired layout segments in ff_layout_initiate_commit() NFS: Fix another COMMIT race in pNFS NFS: Fix a COMMIT race in pNFS mount: copy the port field into the cloned nfs_server structure. NFS: Don't run wake_up_bit() when nobody is waiting... nfs: add export operations
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs由 Linus Torvalds 提交于
Pull overlayfs fixes from Miklos Szeredi: "This fixes a crash with SELinux and several other old and new bugs" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: check for bad and whiteout index on lookup ovl: do not cleanup directory and whiteout index entries ovl: fix xattr get and set with selinux ovl: remove unneeded check for IS_ERR() ovl: fix origin verification of index dir ovl: mark parent impure on ovl_link() ovl: fix random return value on mount
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "A small set of fixes for -rc2 - two fixes for BFQ, documentation and code, and a removal of an unused variable in nbd. Outside of that, a small collection of fixes from the usual crew on the nvme side" * 'for-linus' of git://git.kernel.dk/linux-block: nvmet: don't report 0-bytes in serial number nvmet: preserve controller serial number between reboots nvmet: Move serial number from controller to subsystem nvmet: prefix version configfs file with attr nvme-pci: Fix an error handling path in 'nvme_probe()' nvme-pci: Remove nvme_setup_prps BUG_ON nvme-pci: add another device ID with stripe quirk nvmet-fc: fix byte swapping in nvmet_fc_ls_create_association nvme: fix byte swapping in the streams code nbd: kill unused ret in recv_work bfq: dispatch request to prevent queue stalling after the request completion bfq: fix typos in comments about B-WF2Q+ algorithm
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull more rdma fixes from Doug Ledford: "As per my previous pull request, there were two drivers that each had a rather large number of legitimate fixes still to be sent. As it turned out, I also missed a reasonably large set of fixes from one person across the stack that are all important fixes. All in all, the bnxt_re, i40iw, and Dan Carpenter are 3/4 to 2/3rds of this pull request. There were some other random fixes that I didn't send in the last pull request that I added to this one. This catches the rdma stack up to the fixes from up to about the beginning of this week. Any more fixes I'll wait and batch up later in the -rc cycle. This will give us a good base to start with for basing a for-next branch on -rc2. Summary: - i40iw fixes - bnxt_re fixes - Dan Carpenter bugfixes across stack - ten more random fixes, no more than two from any one person" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) RDMA/core: Initialize port_num in qp_attr RDMA/uverbs: Fix the check for port number IB/cma: Fix reference count leak when no ipv4 addresses are set RDMA/iser: don't send an rkey if all data is written as immadiate-data rxe: fix broken receive queue draining RDMA/qedr: Prevent memory overrun in verbs' user responses iw_cxgb4: don't use WR keys/addrs for 0 byte reads IB/mlx4: Fix CM REQ retries in paravirt mode IB/rdmavt: Setting of QP timeout can overflow jiffies computation IB/core: Fix sparse warnings RDMA/bnxt_re: Fix the value reported for local ack delay RDMA/bnxt_re: Report MISSED_EVENTS in req_notify_cq RDMA/bnxt_re: Fix return value of poll routine RDMA/bnxt_re: Enable atomics only if host bios supports RDMA/bnxt_re: Specify RDMA component when allocating stats context RDMA/bnxt_re: Fixed the max_rd_atomic support for initiator and destination QP RDMA/bnxt_re: Report supported value to IB stack in query_device RDMA/bnxt_re: Do not free the ctx_tbl entry if delete GID fails RDMA/bnxt_re: Fix WQE Size posted to HW to prevent it from throwing error RDMA/bnxt_re: Free doorbell page index (DPI) during dealloc ucontext ...
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A bunch of fixes for rc2: two imx regressions, vc4 fix, dma-buf fix, some displayport mst fixes, and an amdkfd fix. Nothing too crazy, I assume we just haven't see much rc1 testing yet" * tag 'drm-fixes-for-v4.13-rc2' of git://people.freedesktop.org/~airlied/linux: drm/mst: Avoid processing partially received up/down message transactions drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req() drm/mst: Fix error handling during MST sideband message reception drm/imx: parallel-display: Accept drm_of_find_panel_or_bridge failure drm/imx: fix typo in ipu_plane_formats[] drm/vc4: Fix VBLANK handling in crtc->enable() path dma-buf/fence: Avoid use of uninitialised timestamp drm/amdgpu: Remove unused field kgd2kfd_shared_resources.num_mec drm/radeon: Remove initialization of shared_resources.num_mec drm/amdkfd: Remove unused references to shared_resources.num_mec drm/amdgpu: Fix KFD oversubscription by tracking queues correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing fixes from Steven Rostedt: "Three minor updates - Use the new GFP_RETRY_MAYFAIL to be more aggressive in allocating memory for the ring buffer without causing OOMs - Fix a memory leak in adding and removing instances - Add __rcu annotation to be able to debug RCU usage of function tracing a bit better" * tag 'trace-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: trace: fix the errors caused by incompatible type of RCU variables tracing: Fix kmemleak in instance_rmdir tracing/ring_buffer: Try harder to allocate
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Radim Krčmář: "A bunch of small fixes for x86" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: hyperv: avoid livelock in oneshot SynIC timers KVM: VMX: Fix invalid guest state detection after task-switch emulation x86: add MULTIUSER dependency for KVM KVM: nVMX: Disallow VM-entry in MOV-SS shadow KVM: nVMX: track NMI blocking state separately for each VMCS KVM: x86: masking out upper bits
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "A handful of fixes, mostly for new code: - some reworking of the new STRICT_KERNEL_RWX support to make sure we also remove executable permission from __init memory before it's freed. - a fix to some recent optimisations to the hypercall entry where we were clobbering r12, this was breaking nested guests (PR KVM). - a fix for the recent patch to opal_configure_cores(). This could break booting on bare metal Power8 boxes if the kernel was built without CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG. - .. and finally a workaround for spurious PMU interrupts on Power9 DD2. Thanks to: Nicholas Piggin, Anton Blanchard, Balbir Singh" * tag 'powerpc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Mark __init memory no-execute when STRICT_KERNEL_RWX=y powerpc/mm/hash: Refactor hash__mark_rodata_ro() powerpc/mm/radix: Refactor radix__mark_rodata_ro() powerpc/64s: Fix hypercall entry clobbering r12 input powerpc/perf: Avoid spurious PMU interrupts after idle powerpc/powernv: Fix boot on Power8 bare metal due to opal_configure_cores()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Half of the fixes are for various build time warnings triggered by randconfig builds. Most (but not all...) were harmless. There's also: - ACPI boundary condition fixes - UV platform fixes - defconfig updates - an AMD K6 CPU init fix - a %pOF printk format related preparatory change - .. and a warning fix related to the tlb/PCID changes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/devicetree: Convert to using %pOF instead of ->full_name x86/platform/uv/BAU: Disable BAU on single hub configurations x86/platform/intel-mid: Fix a format string overflow warning x86/platform: Add PCI dependency for PUNIT_ATOM_DEBUG x86/build: Silence the build with "make -s" x86/io: Add "memory" clobber to insb/insw/insl/outsb/outsw/outsl x86/fpu/math-emu: Avoid bogus -Wint-in-bool-context warning x86/fpu/math-emu: Fix possible uninitialized variable use perf/x86: Shut up false-positive -Wmaybe-uninitialized warning x86/defconfig: Remove stale, old Kconfig options x86/ioapic: Pass the correct data to unmask_ioapic_irq() x86/acpi: Prevent out of bound access caused by broken ACPI tables x86/mm, KVM: Fix warning when !CONFIG_PREEMPT_COUNT x86/platform/uv/BAU: Fix congested_response_us not taking effect x86/cpu: Use indirect call to measure performance in init_amd_k6()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fix from Ingo Molnar: "A timer_irq_init() clocksource API robustness fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-of: Handle of_irq_get_byname() result correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "A cputime fix and code comments/organization fix to the deadline scheduler" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Fix confusing comments about selection of top pi-waiter sched/cputime: Don't use smp_processor_id() in preemptible context
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Two hw-enablement patches, two race fixes, three fixes for regressions of semantics, plus a number of tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Add proper condition to run sched_task callbacks perf/core: Fix locking for children siblings group read perf/core: Fix scheduling regression of pinned groups perf/x86/intel: Fix debug_store reset field for freq events perf/x86/intel: Add Goldmont Plus CPU PMU support perf/x86/intel: Enable C-state residency events for Apollo Lake perf symbols: Accept zero as the kernel base address Revert "perf/core: Drop kernel samples even though :u is specified" perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target perf evsel: State in the default event name if attr.exclude_kernel is set perf evsel: Fix attr.exclude_kernel setting for default cycles:p
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fixlet from Ingo Molnar: "Remove an unnecessary priority adjustment in the rtmutex code" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Remove unnecessary priority adjustment
-
由 Trond Myklebust 提交于
We must set fl->dsaddr once, and once only, even if there are multiple processes calling filelayout_check_deviceid() for the same layout segment. Reported-by: NOlga Kornievskaia <kolga@netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-