The server side of qperf panics as follows:

[242446.336860] IP: report_bug+0x64/0x10
[242446.341031] PGD 1c0c067
[242446.341032] P4D 1c0c067
[242446.343951] PUD 1c0d063
[242446.346870] PMD 8587ea067
[242446.349788] PTE 800000083e14016
[242446.352901]
[242446.358352] Oops: 0003 [#1] SM
[242446.437919] CPU: 1 PID: 7442 Comm: irq/92-hfi1_0 k Not tainted 4.12.0-mam-asm #1
[242446.446365] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/201
[242446.458397] task: ffff8808392d2b80 task.stack: ffffc9000664000
[242446.465097] RIP: 0010:report_bug+0x64/0x10
[242446.469859] RSP: 0018:ffffc900066439c0 EFLAGS: 0001000
[242446.475784] RAX: ffffffffa06647e4 RBX: ffffffffa06461e1 RCX: 000000000000000
[242446.483840] RDX: 0000000000000907 RSI: ffffffffa0675040 RDI: ffffffffffff740
[242446.491897] RBP: ffffc900066439e0 R08: 0000000000000001 R09: 000000000000025
[242446.499953] R10: ffffffff81a253df R11: 0000000000000133 R12: ffffc90006643b3
[242446.508010] R13: ffffffffa065bbf0 R14: 00000000000001e5 R15: 000000000000000
[242446.516067] FS:  0000000000000000(0000) GS:ffff88085f640000(0000) knlGS:000000000000000
[242446.525191] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003
[242446.531698] CR2: ffffffffa06647ee CR3: 0000000001c09000 CR4: 00000000001406e
[242446.539756] Call Trace
[242446.542582]  fixup_bug+0x2c/0x5
[242446.546277]  do_trap+0x12b/0x18
[242446.549972]  do_error_trap+0x89/0x11
[242446.554171]  ? hfi1_copy_sge+0x271/0x2b0 [hfi1
[242446.559324]  ? ttwu_do_wakeup+0x1e/0x14
[242446.563795]  ? ttwu_do_activate+0x77/0x8
[242446.568363]  do_invalid_op+0x20/0x3
[242446.572448]  invalid_op+0x1e/0x3
[242446.576247] RIP: 0010:hfi1_copy_sge+0x271/0x2b0 [hfi1
[242446.582075] RSP: 0018:ffffc90006643be8 EFLAGS: 0001004
[242446.587999] RAX: 0000000000000000 RBX: ffff88083e0fa240 RCX: 000000000000000
[242446.596058] RDX: 0000000000000000 RSI: ffff880842508000 RDI: ffff88083e0fa24
[242446.604116] RBP: ffffc90006643c28 R08: 0000000000000000 R09: 000000000000000
[242446.612172] R10: ffffc90009473640 R11: 0000000000000133 R12: 000000000000000
[242446.620228] R13: 0000000000000000 R14: 0000000000002000 R15: ffff88084250800
[242446.628293]  ? hfi1_copy_sge+0x1a1/0x2b0 [hfi1
[242446.633449]  hfi1_rc_rcv+0x3da/0x1270 [hfi1
[242446.638312]  ? sc_buffer_alloc+0x113/0x150 [hfi1
[242446.643662]  hfi1_ib_rcv+0x1c9/0x2e0 [hfi1
[242446.648428]  process_receive_ib+0x19a/0x270 [hfi1
[242446.653866]  ? process_rcv_qp_work+0xd2/0x160 [hfi1
[242446.659505]  handle_receive_interrupt_nodma_rtail+0x184/0x2e0 [hfi1
[242446.666693]  ? irq_finalize_oneshot+0x100/0x10
[242446.671846]  receive_context_thread+0x1b/0x140 [hfi1
[242446.677576]  irq_thread_fn+0x1e/0x4
[242446.681659]  irq_thread+0x13c/0x1b
[242446.685646]  ? irq_forced_thread_fn+0x60/0x6
[242446.690604]  kthread+0x112/0x15
[242446.694298]  ? irq_thread_check_affinity+0xe0/0xe
[242446.699738]  ? kthread_park+0x60/0x6
[242446.703919]  ? do_syscall_64+0x67/0x15
[242446.708292]  ret_from_fork+0x25/0x3
[242446.712374] Code: 63 78 04 44 0f b7 70 08 41 89 d0 4c 8d 2c 38 41 83 e0 01 f6 c2 02 74 17 66 45 85 c0 74 11 f6 c2 04 b9 01 00 00 00 75 bb 83 ca 04 <66> 89 50 0a 66 45 85 c0 74 52 0f b6 48 0b 41 0f b7 f6 4d 89 e0
[242446.733527] RIP: report_bug+0x64/0x100 RSP: ffffc900066439c
[242446.739935] CR2: ffffffffa06647e
[242446.743763] ---[ end trace 0e90a20d0aa494f7 ]--

The root cause is that the qib/hfi1 post receive call to rvt_lkey_ok()
doesn't interpret the new return value from rvt_lkey_ok() properly
leading to an mr reference count underrun.

Additionally, remove an unused argument in rvt_sge_adjacent()
aw well as an unneeded incr local in rvt_post_one_wr().

Fixes: Commit 14fe13fc ("IB/rdmavt: Compress adjacent SGEs in rvt_lkey_ok()")
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The error messages when checksum validation of the platform
configuration fields populated into the ASIC scratch registers fails are
ambiguous. Disambiguate them.
Reviewed-by: NJakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: NJan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The allocate_ctxt() function adds the context to the fd data structure.
Since the context is not completely initialized, this can cause confusion
as to whether the context is valid or not.

Move the fd reference from allocate_ctxt() to setup_base_ctxt().
Update the necessary functions to be aware of this move.
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix issue where a disabled port can be enabled by
inserting a cable. The port should be explicitly
enabled instead.
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: NJakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: NJan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There is a window that allows other threads to read state of
'host_link_state' as a new, before the hardware actual state is set.
This patch closes the window by indicating a new state only after
hardware transition is complete.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NAlex Estrin <alex.estrin@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

A copy_to_user() call assumes that two members of a data structure
are sequential.  Since this may not always be true, separate the copies
to ensure a safe copy.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There is a window where the FM can read the buffer control table
and decide not to program buffers. When a port goes down, the code
clears the table and if it is not programmed, posted SDMA descriptors
will never complete due to no buffer credits.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NAlex Estrin <alex.estrin@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

During PCIe initialization some registers' values from
PCI config space are saved in order to restore them later
(i.e. after reset). Restoring those value is done by a
function called restore_pci_variables, while saving them
is put directly into function hfi1_pcie_ddinit.
Move saving values to a separate function in the image
of restoring functionality.
Reviewed-by: NJakub Byczkowski <jakub.byczkowski@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NBartlomiej Dudek <bartlomiej.dudek@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Loading debug signed firmware fails if started immediately after
failed attempt to load production firmware. A short delay is
required so add about a 100us delay after RSA check failure.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Code structure is not consistent for if/else blocks and break
instructions in set_link_state for case HLS_UP_INIT. Physical
state uses break in case of an error and if/else blocks for
logical use cases. These blocks should be implemented consistently.
Reviewed-by: NJakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: NJan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

A trap should be sent to the FM until the FM sends a repress message.
This is in line with the IBTA 13.4.9.

Add the ability to resend traps until a repress message is received.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NMichael N. Henry <michael.n.henry@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The hfi1_rcvctrl() function receives an index which it then converts
to an rcd.  Since most functions have the rcd, use that instead.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The hfi1_<set|clear>_ctxt_<j|p>key functions take a context index and
look up the context based on that index.

Since the context index is being retrieved from the context, this
doesn't seem optimal.

Pass the context pointer for use, rather than the context index.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The array index for the rcd array is sized several different ways
throughout the code.

Use the user interface size (u16) as the standard size and update the
necessary code to reflect this.

u16 is large enough for the largest amount of supported contexts.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Several data members of the user context have become unused over time.
Cleaning them up.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In the error path for context allocation, the file descriptor pointer
should not point to a context when an error occurs.

Clean up the appropriate references on error.

Fixes: Commit 62239fc6 ("IB/hfi1: Clean up on context initialization failure")
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When an egress resource(SDMA descriptors, pio credits) is not available,
a sending thread will be put on the resource's wait queue. When the
resource becomes available again, up to a fixed number of sending threads
can be awakened sequentially and removed from the wait queue, depending
on the number of waiting threads and the number of free resources. Since
each awakened sending thread will send as many packets as possible, it
is highly likely that the first sending thread will consume all the
egress resources. Subsequently, it will be put back to the end of the wait
queue. Depending on the timing when the later sending threads wake up,
they may not be able to send any packet and be again put back to the end
of the wait queue sequentially, right behind the first sending thread.
This starvation cycle continues until some sending threads exceed their
retry limit and consequently fail.

This patch fixes the issue by two simple approaches:
(1) Any starved sending thread will be put to the head of the wait queue
while a served sending thread will be put to the tail;
(2) The most starved sending thread will be served first.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When the debugpat kernel boot flag is turned on the following
traces are printed:

[ 1884.793168] x86/PAT: Overlap at 0x90000000-0x92000000
[ 1884.803510] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff],
track uncached-minus, req write-combining, ret uncached-minus
[ 1884.818167] hfi1 0000:05:00.0: hfi1_0: WC Remapped RcvArray:
ffffc9000a980000

The ioremap_wc() clearly is not returning a write combining mapping due
to an overlap where the RcvArray is mapped in a uncached mapping prior
to creating the proposed write combining mapping.

The patch replaces the single base register for uncached CSRs that
used to overlap the RcvArray with two mappings.   One, kregbase1, from the
bar0 up to the RcvArray and another, kregbase2, from the end of the
RcvArray to the pio send buffer space.  A new dd field, base2_start,
is used to convert the zero-based offset in the CSR routines to the
correct kregbase1/kregbase2 mapping.  A single direct write of the
RcvArray CSRs is replaced with hfi1_put_tid() to insure correct access
using the new disjoint mapping.

Additionally, the kregend field is deleted since it is only ever written.

patdebug now shows the RcvArray as write combining:
[   35.688990] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff],
track write-combining, req write-combining, ret write-combining

To insulate from any potential issues with write combining, all
writeq are now flushed in hfi1_put_tid() and rcv_array_wc_fill().
Reviewed-by: NMitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Ensure that return values from kernel PCI config access
API calls in HFI driver are checked and react properly if
they are not expected (i.e. not successful).
Reviewed-by: NJakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: NBartlomiej Dudek <bartlomiej.dudek@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

I ran into this build error on linux-next:

drivers/infiniband/hw/hns/hns_roce_eq.c:477:8: error: unknown type name 'irqreturn_t'
 static irqreturn_t hns_roce_msi_x_interrupt(int irq, void *eq_ptr)
        ^~~~~~~~~~~
drivers/infiniband/hw/hns/hns_roce_eq.c: In function 'hns_roce_msi_x_interrupt':
drivers/infiniband/hw/hns/hns_roce_eq.c:485:9: error: implicit declaration of function 'IRQ_RETVAL'; did you mean 'BPF_RVAL'? [-Werror=implicit-function-declaration]
  return IRQ_RETVAL(int_work);

I have bisected this to a seemingly unrelated change that happened
to remove some indirect header inclusions. Simply including the
required header explicitly fixes the build failure.

Fixes: 09c75704 ("xfrm: remove flow cache")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The 0day build system flags implicit includes as errors.  A patch from
Matan Barak to allow hns_roce, an aarch64 specific RDMA driver, to be
built on other arches, but it resulted in build regressions.  The
problem is that hns_roce_device.h needs a definition for __raw_writeq
but did not have an include to provide it.  Add <linux/io.h> as an
include to resolve the issue.
Signed-off-by: NDoug Ledford <dledford@redhat.com>

drivers/infiniband/hw/hns/hns_roce_eq.c:295:3-4: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: 7d1b6a678e0b ("IB/hns: Support compile test for hns RoCE driver")
CC: Matan Barak <matanb@mellanox.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

drivers/infiniband/hw/hns/hns_roce_hw_v1.c:2026:5-8: Unneeded variable: "ret". Return "0" on line 2046

 Remove unneeded variable used to store return value.

Generated by: scripts/coccinelle/misc/returnvar.cocci

Fixes: 7d1b6a678e0b ("IB/hns: Support compile test for hns RoCE driver")
CC: Matan Barak <matanb@mellanox.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

drivers/infiniband/hw/hns/hns_roce_qp.c:802:9-10: WARNING: return of 0/1 in function 'hns_roce_wq_overflow' with return type bool

 Return statements in functions returning bool should use
 true/false instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci

Fixes: 7d1b6a678e0b ("IB/hns: Support compile test for hns RoCE driver")
CC: Matan Barak <matanb@mellanox.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Compiling the hns RoCE driver requires ARM architecture.
In order to simplify development of IB/core, support
compile test. Add the necessary includes for that too.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The initial patch for changing the stack to use RoCEv2 GIDs by default
set the CMA_PREFERRED_ROCE_GID_TYPE to an incorrect value.  Instead of
an absolute value, we needed to set the right bit in a bitmask.  Correct
the default setting so we use RoCEv2 by default.

Fixes: 63a5f483 (IB/cma: Set default gid type to RoCEv2)
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The number of supported WIDs, if they are supported at all, can be
limited due to resources. Notifying the user space application the
number of available WIDs allows it to utilize them correctly.
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Direct Packet Mode support may be disabled, e.g, due to limited
resources. Notifying the user application prevents wasting cycles
on attempting to send these kind of packets.
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Trivial fix to spelling mistake in mlx5_ib_dbg message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds qp->s_ack_queue indices and size to qp_stats printout.
This information will provide information about the receiving side.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

As a final step to support RSS feature, expose the RSS capabilities in
query device verb.

It includes:
- Max rwq indirection tables.
- Max rwq indirection table size.
- Supported qp types.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support to work with a RSS QP by using an indirection table object
upon QP creation. Other related QP verbs (e.g. modify/destroy/query) were
updated as well for that QP mode.

Notes:
- The RX hash properties are supplied as driver private data.
- The RSS QP port is used on the associated WQs in its indirection
  table. Applying different ports during WQ life time is not allowed.
- The expected RSS QP flow is: create, modify(RST->INIT),
  modify(RST->RTR), destroy.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To enable RSS functionality the IB indirection table object (i.e.
ib_rwq_ind_table) should be used.
This patch implements the related verbs as of create and destroy an
indirection table.

In downstream patches the indirection table will be used as part of RSS
QP creation.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Support create/modify/destroy WQ related verbs.

The base IB object to enable RSS functionality is a WQ (i.e. ib_wq).
This patch implements the related WQ verbs as of create, modify and
destroy.

In downstream patches the WQ will be used as part of an indirection
table (i.e. ib_rwq_ind_table) to enable RSS QP creation.

Notes:
ConnectX-3 hardware requires consecutive WQNs list as receive descriptor
queues for the RSS QP. Hence, the driver manages consecutive ranges lists
per context which the user must respect.
Destroying the WQ does not return its WQN back to its range for
reusing. However, destroying all WQs from the same range releases the
range and in turn releases its WQNs for reusing.

Since the WQ object is not a natural object in the hardware, the driver
implements the WQ by the hardware QP.

As such, the WQ inherits its port from its RSS QP parent upon its
RST->INIT transition and by that time its state is applied to the
hardware.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Adding visibility of resource usage of QPs, CQs and counters used by
virtual functions. This feature will be used to give the PF administrator
more data while debugging VF status. Usage info was added to ALLOC_RES
command, to notify the PF if the resource which is being reserved or
allocated for the VF will be used by kernel driver or by user verbs.

Updated reservation and allocation functions of QP, CQ and counter with
additional usage parameter.
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When inline-receive is enabled, the HCA may write received
data into the receive WQE.

Inline-receive is enabled by setting its matching bit in
the QP context and each single-packet message with payload
not exceeding the receive WQE size will be delivered to
the WQE.

The completion report will indicate that the payload was placed to the WQE.

It includes:
1) Return maximum supported size of inline-receive by the hardware
in query_device vendor's data part.
2) Enable the feature when requested by the vendor data input.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds below requester and responder side error counters,
which will be exposed by hardware counters interface and are supported
as part of query Q counters command extension.

 +---------------------------+-------------------------------------+
 |      Name                 |           Description               |
 |---------------------------+-------------------------------------|
 |resp_local_length_error    | Number of times responder detected  |
 |                           | local length errors                 |
 |---------------------------+-------------------------------------|
 |resp_cqe_error             | Number of CQEs completed with error |
 |                           | at responder                        |
 |---------------------------+-------------------------------------|
 |req_cqe_error              | Number of CQEs completed with error |
 |                           | at requester                        |
 |---------------------------+-------------------------------------|
 |req_remote_invalid_request | Number of times requester detected  |
 |                           | remote invalid request error        |
 |---------------------------+-------------------------------------|
 |req_remote_access_error    | Number of times requester detected  |
 |                           | remote access error                 |
 |---------------------------+-------------------------------------|
 |resp_remote_access_error   | Number of times responder detected  |
 |                           | remote access error                 |
 |---------------------------+-------------------------------------|
 |resp_cqe_flush_error       | Number of CQEs completed with       |
 |                           | flushed with error at responder     |
 |---------------------------+-------------------------------------|
 |req_cqe_flush_error        | Number of CQEs completed with       |
 |                           | flushed with error at requester     |
 +---------------------------+-------------------------------------+
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The extended address vector is the highest bit in be32 variable,
but it was compared with the lowest. This patch fixes the endianness
of that check and removes already declared define.

Fixes: 17d2f88f ("IB/mlx5: Add ODP atomics support")
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>