Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests.  This allows much easier grepping for different request
types instead of unwinding through macros.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Except for SCSI no device drivers distinguish between physical and
hardware segment limits.  Consolidate the two into a single segment
limit.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

PHYSADDR() is gone, and completely unecessary in all of the cases the
gdrom driver was using it. Kill off all references to it, and change the
one legitimate use over to virt_to_phys() instead.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case.  The
sector size will be 4KB but the logical block size will remain
512-bytes.  Hence we need to distinguish between the physical block size
and the logical ditto.

This patch renames hardsect_size to logical_block_size.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Till now block layer allowed two separate modes of request execution.
A request is always acquired from the request queue via
elv_next_request().  After that, drivers are free to either dequeue it
or process it without dequeueing.  Dequeue allows elv_next_request()
to return the next request so that multiple requests can be in flight.

Executing requests without dequeueing has its merits mostly in
allowing drivers for simpler devices which can't do sg to deal with
segments only without considering request boundary.  However, the
benefit this brings is dubious and declining while the cost of the API
ambiguity is increasing.  Segment based drivers are usually for very
old or limited devices and as converting to dequeueing model isn't
difficult, it doesn't justify the API overhead it puts on block layer
and its more modern users.

Previous patches converted all block low level drivers to dequeueing
model.  This patch completes the API transition by...

* renaming elv_next_request() to blk_peek_request()

* renaming blkdev_dequeue_request() to blk_start_request()

* adding blk_fetch_request() which is combination of peek and start

* disallowing completion of queued (not started) requests

* applying new API to all LLDs

Renamings are for consistency and to break out of tree code so that
it's apparent that out of tree drivers need updating.

[ Impact: block request issue API cleanup, no functional change ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: unsik Kim <donari75@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Laurent Vivier <Laurent@lvivier.info>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

gdrom already dequeues and fully completes requests on normal path and
the error paths can be easily converted to do so too.  Clean it up and
dequeue requests on error paths too.

While at it remove superflous blk_fs_request() && !blk_rq_sectors()
condition check.

[ Impact: dequeue in-flight request, cleanup ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

With recent cleanups, there is no place where low level driver
directly manipulates request fields.  This means that the 'hard'
request fields always equal the !hard fields.  Convert all
rq->sectors, nr_sectors and current_nr_sectors references to
accessors.

While at it, drop superflous blk_rq_pos() < 0 test in swim.c.

[ Impact: use pos and nr_sectors accessors ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Tested-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Tested-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: NMike Miller <mike.miller@hp.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Dario Ballabio <ballabio_dario@emc.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: unsik Kim <donari75@gmail.com>
Cc: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

end_request() has been kept around for backward compatibility;
however, it's about time for it to go away.

* There aren't too many users left.

* Its use of @updtodate is pretty confusing.

* In some cases, newer code ends up using mixture of end_request() and
  [__]blk_end_request[_all](), which is way too confusing.

So, add [__]blk_end_request_cur() and replace end_request() with it.
Most conversions are straightforward.  Noteworthy ones are...

* paride/pcd: next_request() updated to take 0/-errno instead of 1/0.

* paride/pf: pf_end_request() and next_request() updated to take
  0/-errno instead of 1/0.

* xd: xd_readwrite() updated to return 0/-errno instead of 1/0.

* mtd/mtd_blkdevs: blktrans_discard_request() updated to return
  0/-errno instead of 1/0.  Unnecessary local variable res
  initialization removed from mtd_blktrans_thread().

[ Impact: cleanup ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NJoerg Dorchain <joerg@dorchain.net>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NLaurent Vivier <Laurent@lvivier.info>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: unsik Kim <donari75@gmail.com>

There are many [__]blk_end_request() call sites which call it with
full request length and expect full completion.  Many of them ensure
that the request actually completes by doing BUG_ON() the return
value, which is awkward and error-prone.

This patch adds [__]blk_end_request_all() which takes @rq and @error
and fully completes the request.  BUG_ON() is added to to ensure that
this actually happens.

Most conversions are simple but there are a few noteworthy ones.

* cdrom/viocd: viocd_end_request() replaced with direct calls to
  __blk_end_request_all().

* s390/block/dasd: dasd_end_request() replaced with direct calls to
  __blk_end_request_all().

* s390/char/tape_block: tapeblock_end_request() replaced with direct
  calls to blk_end_request_all().

[ Impact: cleanup ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>

Return value and argument of block_device_operations.release of gdrom
was changed.
This patch fix this problem.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
	1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both.  That's this changeset.
	2) for each driver convert to new methods.  *ALL* drivers
are converted in this series.
	3) kill the old (renamed) methods.

Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain.  The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.

New methods:
	open(bdev, mode)
	release(disk, mode)
	ioctl(bdev, mode, cmd, arg)		/* Called without BKL */
	compat_ioctl(bdev, mode, cmd, arg)
	locked_ioctl(bdev, mode, cmd, arg)	/* Called with BKL, legacy */
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... convert to it in callers
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This patch converts gdrom to use __blk_end_request() directly
so that end_{queued|dequeued}_request() can be removed.

gd.transfer is '1' in error cases and '0' in non-error cases,
so gdrom hasn't been propagating any error code to the block layer.
We can just convert error cases to '-EIO'.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Make sure audio_ioctl is always defined even if being a dummy function
since the cdrom_ioctl interface assumes its existence and we don't
want to BUG on null ptr on some ioctls like, e.g. CDROMREADTOCENTRY,
CDROMREADTOCHDR etc. when we fix CDC_PLAY_AUDIO checking in cdrom.c.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Acked-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Now unregister_cdrom() always returns 0.
Make it return void and update all callers that check the return value.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This patch adds support for the GD-Rom drive, SEGA's proprietary
implementation of an IDE CD Rom for the SEGA Dreamcast. This driver
implements Sega's Packet Interface (SPI) - at least partially. It will
also read disks in SEGA's propreitary GD format.

Unlike previous drivers (which were never in mainline) this uses DMA and
not PIO to read disks. It is a new driver, not a refactoring of old
drivers.

Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>