To address the case where physically contiguous memory
MAY NOT be a mandatory requirement for framebuffer for
the application calling exynos_drm_gem_dumb_create,
the patch adds a feature to get non physically contiguous
memory for framebuffer, if physically contiguous memory
allocation fails and if IOMMU is supported.
Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: NArun Kumar <arun.kk@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch moves platfrom_data and device tree parsing
to separate function.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch adds code to get signal polarization setting
from device tree display-timings node.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch replaces all occurrences of struct fb_videomode by
more accurate struct videomode. The change allows to remove
mode conversion function and simplifies clock divider calculation.
Clock configuration is moved to separate function.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch checks if a requested window supports alpha channel or not.

In case of s3c64xx, window 0 doesn't support alpha channel so if
the request pixel format is ARGB8888 then change it to XRGB8888.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This patch fixes wrong pixel format setting.

A pixel format is decided according to bpp and depth, or user-requested
format but fimd driver considered only bpp value to decide a proper pixel
format. So this patch makes a proper pixel format to be set according
to drm_framebuffer's pixel_format which is set by addfb with bpp and
depth, or addfb2 with user-requested format.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

devm_kzalloc can fail. Hence check the pointer to avoid NULL pointer
dereferencing.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

kzalloc already has built-in error messages. Hence remove
additional ones.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Add of.h explicitly for of_* APIs.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

kfree handles null pointers. Hence this check is not necessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The exynos4 platform is only dt-based since 3.10, we should convert driver data
and ids to dt-based parsing methods. The rotator driver has a limit table to get
size limit of input picture. Each SoCs has slightly different limit value
compared with any others.
For example, exynos4210's max_size of RGB888 is 16k x 16k. But, others have
8k x 8k. Another example the exynos5250 should have multiple of 2 pixel size
for its X/Y axis. Thus, we should keep different tables for each of them.
This patch also includes desciptions of each nodes for the rotator and specifies
a example how to bind it.
Signed-off-by: NChanho Park <chanho61.park@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Ensure that all externally accessed functions are correctly prototyped
when defined in each file by making sure the headers with the protoypes
are included in the file with the definition.
Signed-off-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch makes g2d power domain and clock to be controlled
through pm runtime interfaces instead of controlling them
respectively.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

While trying to get boot-logo up on exynos5420 SMDK which has eDP panel
connected with resolution 2560x1600, following error occured even with
IOMMU enabled:
[0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate buffer.
[0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0

To address the cases where physically contiguous memory MAY NOT be a
mandatory requirement for fb, the patch adds a feature to get non physically
contiguous memory for fb if physically contiguous memory allocation fails
and if IOMMU is supported.
Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: NArun Kumar <arun.kk@samsung.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Suppress warning of unused-variables by adding a BUG()+return for invalid
audio-formats.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NAlex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

I was getting a order 4 allocation failure from kmalloc when testing some
game after a few days uptime with some suspend/resumes.

For big allocations vmalloc should be used instead.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Some vbioses have extra useless entries after "the end" of the table. This is
problematic since all of the vbios I found with this issue redefine the
pwm freq divider to insane levels (52750 Hz instead of 2500), thus breaking
fan management.

The first solution to solve this mess would be to change the length of the
table. The solution I choose was simply to avoid setting the pwm freq twice
as the other redefinitions are harmless with our current parser.
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Reported-by: NMariusz Bialonczyk <manio@skyboo.net>
Tested-by: NMariusz Bialonczyk <manio@skyboo.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

MSIs were only problematic on some old, broken chipsets. But now that we
already see systems where PCI legacy interrupts are somewhat flaky, it's
really time to move to MSIs.

v2 (Ben Skeggs): blacklist BR02 boards
Signed-off-by: NLucas Stach <dev@lynxeye.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fixes a VGA monitor with a dodgy red (in this case) pin not being
detected.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Commit ea9197cc effectively enabled the
use of an improved DAC detection code, but introduced a regression on
the original nv50 chipset, causing a ghost monitor to be detected.

v2 (Ben Skeggs): the offending line was likely a thinko, removed it for
all chipsets (tested nv50 and nve6 to cover entire range) and added
some additional debugging.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67382Tested-by: NMartin Peres <martin.peres@labri.fr>
Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

i2c_bit_add_bus can call the pre_xfer function, which expects the func
pointer to be set. Pass in func to the port creation logic so that it is
set before i2c_bit_add_bus.

See https://bugs.freedesktop.org/show_bug.cgi?id=68456Reported-by: NHans-Peter Deifel <hpdeifel@gmx.de>
Tested-by: NHans-Peter Deifel <hpdeifel@gmx.de>
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Therm uses 3 ptimer alarms. Two to drive the fan and one for polling the
temperature. When suspending/resuming, alarms will never be fired.
As we are checking if there isn't an alarm pending before rescheduling
another one, we end up never checking temperature or updating the
fan speed.

This commit also adds debug messages to be able to spot more easily
if this case happens again in the future. Sorry for the spam if you
activate the debug level though.
Tested-by: NDash Four <mr.dash.four@googlemail.com>

v2:
- fix temperature polling too
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Tested-by: NMartin Peres <martin.peres@labri.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Since alarms don't play well with suspend, it is important every alarm
user cancels his tasks before suspending.

The task should be rescheduled on resume.
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Tested-by: NMartin Peres <martin.peres@labri.fr>
Tested-by: NDash Four <mr.dash.four@googlemail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This can be useful if some parts of Nouveau try to calculate the time
between two events.  Without this patch, the time difference would be
negative in the case where the computer is suspended/resumed between
two events.

This patch should fix fan speed probing when done while suspending/resuming.

Solve this by saving the current time before suspending and by restoring it
on resume.
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Tested-by: NMartin Peres <martin.peres@labri.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

If the fan was in manual or auto mode, we should restore the fan speed
that was previously set when resuming.

The initial pwm value is saved when loading the module.
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Tested-by: NMartin Peres <martin.peres@labri.fr>
Tested-by: NDash Four <mr.dash.four@googlemail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Tested-by: NMartin Peres <martin.peres@labri.fr>
Tested-by: NDash Four <mr.dash.four@googlemail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This was already required before, but no check in the kernel was done
to enforce it.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The values are already stored on chipset specific basis in the ctor.
Make the most of them and simplify the code further by using a temporary
variable to avoid code duplication.
Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

For NV98+, BSP/VP/PPP are all FUC-based engines. Hook them all up in the
same way as NVC0, but with a couple of different values. Also make sure
that the PPP engine is handled in the fifo/mc/vm.
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Enable support for drm render nodes for radeon by flagging the ioctls that
are safe and just needed for rendering.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Enable support for drm render nodes for nouveau by flagging the ioctls that
are safe and just needed for rendering.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Enable support for drm render nodes for i915 by flagging the ioctls that
are safe and just needed for rendering.

v2: mark reg_read, set_caching and get_caching (ickle, danvet)
Signed-off-by: NKristian Høgsberg <krh@bitplanet.net>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

DRM_IOCTL_MODE_GETFB is used to retrieve information about a given
framebuffer ID. It is a read-only helper and was thus declassified for
unprivileged access in:

  commit a14b1b42
  Author: Mandeep Singh Baines <mandeep.baines@gmail.com>
  Date:   Fri Jan 20 12:11:16 2012 -0800

      drm: remove master fd restriction on mode setting getters

However, alongside width, height and stride information,
DRM_IOCTL_MODE_GETFB also passes back a handle to the underlying buffer of
the framebuffer. This handle allows users to mmap() it and read or write
into it. Obviously, this should be restricted to DRM-Master.

With the current setup, *any* process with access to /dev/dri/card0 (which
means any process with access to hardware-accelerated rendering) can
access the current screen framebuffer and modify it ad libitum.

For backwards-compatibility reasons we want to keep the
DRM_IOCTL_MODE_GETFB call unprivileged. Besides, it provides quite useful
information regarding screen setup. So we simply test whether the caller
is the current DRM-Master and if not, we return 0 as handle, which is
always invalid. A following DRM_IOCTL_GEM_CLOSE on this handle will fail
with EINVAL, but we accept this. Users shouldn't test for errors during
GEM_CLOSE, anyway. And it is still better as a failing MODE_GETFB call.

v2: add capable(CAP_SYS_ADMIN) check for compatibility with i-g-t

Cc: <stable@vger.kernel.org>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Drop the msm_connector base class, and special calls to base class
methods from the encoder, and use instead drm_bridge.  This allows for a
cleaner division between the hdmi (and in future dsi) blocks, from the
mdp block.
Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch adds the notion of a drm_bridge. A bridge is a chained
device which hangs off an encoder. The drm driver using the bridge
should provide the association between encoder and bridge. Once a
bridge is associated with an encoder, it will participate in mode
set, and dpms (via the enable/disable hooks).
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Noticed by kbuild test robot.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Check to make sure the dc limits are valid before using them.
Some systems may not have a dc limits table.  In that case just
use the ac limits.  This fixes hangs on systems when the power
state is changed when on battery (dc) due to invalid performance
state parameters.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=68708Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>